summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)Author
2021-04-26Merge tag 'arm-apple-m1-5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Apple M1 platform support from Arnd Bergmann: "The Apple M1 is the processor used it all current generation Apple Macintosh computers. Support for this platform so far is rudimentary, but it boots and can use framebuffer and serial console over a special USB cable. Support for several essential on-chip devices (USB, PCIe, IOMMU, NVMe) is work in progress but was not ready in time. A very detailed description of what works is in the commit message of commit 1bb2fd3880d4 ("Merge tag 'm1-soc-bringup-v5' [..]") and on the AsahiLinux wiki" Link: https://lore.kernel.org/linux-arm-kernel/bdb18e9f-fcd7-1e31-2224-19c0e5090706@marcan.st/ * tag 'arm-apple-m1-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: asm-generic/io.h: Unbork ioremap_np() declaration arm64: apple: Add initial Apple Mac mini (M1, 2020) devicetree dt-bindings: display: Add apple,simple-framebuffer arm64: Kconfig: Introduce CONFIG_ARCH_APPLE irqchip/apple-aic: Add support for the Apple Interrupt Controller dt-bindings: interrupt-controller: Add DT bindings for apple-aic arm64: Move ICH_ sysreg bits from arm-gic-v3.h to sysreg.h of/address: Add infrastructure to declare MMIO as non-posted asm-generic/io.h: implement pci_remap_cfgspace using ioremap_np arm64: Implement ioremap_np() to map MMIO as nGnRnE docs: driver-api: device-io: Document ioremap() variants & access funcs docs: driver-api: device-io: Document I/O access functions asm-generic/io.h: Add a non-posted variant of ioremap() arm64: arch_timer: Implement support for interrupt-names dt-bindings: timer: arm,arch_timer: Add interrupt-names support arm64: cputype: Add CPU implementor & types for the Apple M1 cores dt-bindings: arm: cpus: Add apple,firestorm & icestorm compatibles dt-bindings: arm: apple: Add bindings for Apple ARM platforms dt-bindings: vendor-prefixes: Add apple prefix
2021-04-26Merge tag 'hyperv-next-signed-20210426' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - VMBus enhancement - Free page reporting support for Hyper-V balloon driver - Some patches for running Linux as Arm64 Hyper-V guest - A few misc clean-up patches * tag 'hyperv-next-signed-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (30 commits) drivers: hv: Create a consistent pattern for checking Hyper-V hypercall status x86/hyperv: Move hv_do_rep_hypercall to asm-generic video: hyperv_fb: Add ratelimit on error message Drivers: hv: vmbus: Increase wait time for VMbus unload Drivers: hv: vmbus: Initialize unload_event statically Drivers: hv: vmbus: Check for pending channel interrupts before taking a CPU offline Drivers: hv: vmbus: Drivers: hv: vmbus: Introduce CHANNELMSG_MODIFYCHANNEL_RESPONSE Drivers: hv: vmbus: Introduce and negotiate VMBus protocol version 5.3 Drivers: hv: vmbus: Use after free in __vmbus_open() Drivers: hv: vmbus: remove unused function Drivers: hv: vmbus: Remove unused linux/version.h header x86/hyperv: remove unused linux/version.h header x86/Hyper-V: Support for free page reporting x86/hyperv: Fix unused variable 'hi' warning in hv_apic_read x86/hyperv: Fix unused variable 'msr_val' warning in hv_qlock_wait hv: hyperv.h: a few mundane typo fixes drivers: hv: Fix EXPORT_SYMBOL and tab spaces issue Drivers: hv: vmbus: Drop error message when 'No request id available' asm-generic/hyperv: Add missing function prototypes per -W1 warnings clocksource/drivers/hyper-v: Move handling of STIMER0 interrupts ...
2021-04-08clocksource/drivers/arm_arch_timer: Add __ro_after_init and __initJisheng Zhang
Some functions are not needed after booting, so mark them as __init to move them to the .init section. Some global variables are never modified after init, so can be __ro_after_init. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210330140444.4fb2a7cb@xhacker.debian
2021-04-08clocksource/drivers/timer-ti-dm: Handle dra7 timer wrap errata i940Tony Lindgren
There is a timer wrap issue on dra7 for the ARM architected timer. In a typical clock configuration the timer fails to wrap after 388 days. To work around the issue, we need to use timer-ti-dm percpu timers instead. Let's configure dmtimer3 and 4 as percpu timers by default, and warn about the issue if the dtb is not configured properly. Let's do this as a single patch so it can be backported to v5.8 and later kernels easily. Note that this patch depends on earlier timer-ti-dm systimer posted mode fixes, and a preparatory clockevent patch "clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issue". For more information, please see the errata for "AM572x Sitara Processors Silicon Revisions 1.1, 2.0": https://www.ti.com/lit/er/sprz429m/sprz429m.pdf The concept is based on earlier reference patches done by Tero Kristo and Keerthy. Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <kristo@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210323074326.28302-3-tony@atomide.com
2021-04-08clocksource/drivers/timer-ti-dm: Prepare to handle dra7 timer wrap issueTony Lindgren
There is a timer wrap issue on dra7 for the ARM architected timer. In a typical clock configuration the timer fails to wrap after 388 days. To work around the issue, we need to use timer-ti-dm timers instead. Let's prepare for adding support for percpu timers by adding a common dmtimer_clkevt_init_common() and call it from dmtimer_clockevent_init(). This patch makes no intentional functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210323074326.28302-2-tony@atomide.com
2021-04-08clocksource/drivers/dw_apb_timer_of: Add handling for potential memory leakDinh Nguyen
Add calls to disable the clock and unmap the timer base address in case of any failures. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210322121844.2271041-1-dinguyen@kernel.org
2021-04-08clocksource/drivers/npcm: Add support for WPCM450Jonathan Neuschäfer
Add a compatible string for WPCM450, which has essentially the same timer controller. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210320181610.680870-11-j.neuschaefer@gmx.net
2021-04-08clocksource/drivers/sh_cmt: Don't use CMTOUT_IE with R-Car Gen2/3Wolfram Sang
CMTOUT_IE is only supported for older SoCs. Newer SoCs shall not set this bit. So, add a version check. Reported-by: Phong Hoang <phong.hoang.wz@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210309094448.31823-1-wsa+renesas@sang-engineering.com
2021-04-08clocksource/drivers/pistachio: Fix trivial typoDrew Fustini
Fix trivial typo, rename local variable from 'overflw' to 'overflow' in pistachio_clocksource_read_cycles(). Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210305090315.384547-1-drew@beagleboard.org
2021-04-08clocksource/drivers/ingenic_ost: Fix return value check in ingenic_ost_probe()Wei Yongjun
In case of error, the function device_node_to_regmap() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: ca7b72b5a5f2 ("clocksource: Add driver for the Ingenic JZ47xx OST") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210308123031.2285083-1-weiyongjun1@huawei.com
2021-04-08clocksource/drivers/timer-ti-dm: Add missing set_state_oneshot_stoppedTony Lindgren
To avoid spurious timer interrupts when KTIME_MAX is used, we need to configure set_state_oneshot_stopped(). Although implementing this is optional, it still affects things like power management for the extra timer interrupt. For more information, please see commit 8fff52fd5093 ("clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state") and commit cf8c5009ee37 ("clockevents/drivers/arm_arch_timer: Implement ->set_state_oneshot_stopped()"). Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210304072135.52712-4-tony@atomide.com
2021-04-08clocksource/drivers/timer-ti-dm: Fix posted mode status check orderTony Lindgren
When the timer is configured in posted mode, we need to check the write- posted status register (TWPS) before writing to the register. We now check TWPS after the write starting with commit 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support"). For example, in the TRM for am571x the following is documented in chapter "22.2.4.13.1.1 Write Posting Synchronization Mode": "For each register, a status bit is provided in the timer write-posted status (TWPS) register. In this mode, it is mandatory that software check this status bit before any write access. If a write is attempted to a register with a previous access pending, the previous access is discarded without notice." The regression happened when I updated the code to use standard read/write accessors for the driver instead of using __omap_dm_timer_load_start(). We have__omap_dm_timer_load_start() check the TWPS status correctly using __omap_dm_timer_write(). Fixes: 52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210304072135.52712-2-tony@atomide.com
2021-04-08clocksource/drivers/ingenic-ost: Add support for the JZ4760BPaul Cercueil
The OST in the JZ4760B SoC works exactly the same as in the JZ4770. But since the JZ4760B is older, its Device Tree string does not fall back to the JZ4770 one; so add support for the JZ4760B compatible string here. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210308212302.10288-3-paul@crapouillou.net
2021-04-08clocksource/drivers/ingenic: Add support for the JZ4760Paul Cercueil
Add support for the TCU (Timer/Counter Unit) of the JZ4760 and JZ4760B SoCs. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210308212302.10288-2-paul@crapouillou.net
2021-04-08arm64: arch_timer: Implement support for interrupt-namesHector Martin
This allows the devicetree to correctly represent the available set of timers, which varies from device to device, without the need for fake dummy interrupts for unavailable slots. Also add the hyp-virt timer/PPI, which is not currently used, but worth representing. Reviewed-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-03-22timekeeping, clocksource: Fix various typos in commentsIngo Molnar
Fix ~56 single-word typos in timekeeping & clocksource code comments. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-kernel@vger.kernel.org
2021-03-08clocksource/drivers/hyper-v: Move handling of STIMER0 interruptsMichael Kelley
STIMER0 interrupts are most naturally modeled as per-cpu IRQs. But because x86/x64 doesn't have per-cpu IRQs, the core STIMER0 interrupt handling machinery is done in code under arch/x86 and Linux IRQs are not used. Adding support for ARM64 means adding equivalent code using per-cpu IRQs under arch/arm64. A better model is to treat per-cpu IRQs as the normal path (which it is for modern architectures), and the x86/x64 path as the exception. Do this by incorporating standard Linux per-cpu IRQ allocation into the main SITMER0 driver code, and bypass it in the x86/x64 exception case. For x86/x64, special case code is retained under arch/x86, but no STIMER0 interrupt handling code is needed under arch/arm64. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1614721102-2241-11-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-08clocksource/drivers/hyper-v: Set clocksource rating based on Hyper-V featureMichael Kelley
On x86/x64, the TSC clocksource is available in a Hyper-V VM only if Hyper-V provides the TSC_INVARIANT flag. The rating on the Hyper-V Reference TSC page clocksource is currently set so that it will not override the TSC clocksource in this case. Alternatively, if the TSC clocksource is not available, then the Hyper-V clocksource is used. But on ARM64, the Hyper-V Reference TSC page clocksource should override the ARM arch counter, since the Hyper-V clocksource provides scaling and offsetting during live migrations that is not provided for the ARM arch counter. To get the needed behavior for both x86/x64 and ARM64, tweak the logic by defaulting the Hyper-V Reference TSC page clocksource rating to a large value that will always override. If the Hyper-V TSC_INVARIANT flag is set, then reduce the rating so that it will not override the TSC. While the logic for getting there is slightly different, the net result in the normal cases is no functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1614721102-2241-10-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-08clocksource/drivers/hyper-v: Handle sched_clock differences inlineMichael Kelley
While the Hyper-V Reference TSC code is architecture neutral, the pv_ops.time.sched_clock() function is implemented for x86/x64, but not for ARM64. Current code calls a utility function under arch/x86 (and coming, under arch/arm64) to handle the difference. Change this approach to handle the difference inline based on whether GENERIC_SCHED_CLOCK is present. The new approach removes code under arch/* since the difference is tied more to the specifics of the Linux implementation than to the architecture. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1614721102-2241-9-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-08clocksource/drivers/hyper-v: Handle vDSO differences inlineMichael Kelley
While the driver for the Hyper-V Reference TSC and STIMERs is architecture neutral, vDSO is implemented for x86/x64, but not for ARM64. Current code calls into utility functions under arch/x86 (and coming, under arch/arm64) to handle the difference. Change this approach to handle the difference inline based on whether VDSO_CLOCK_MODE_HVCLOCK is present. The new approach removes code under arch/* since the difference is tied more to the specifics of the Linux implementation than to the architecture. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1614721102-2241-8-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-03-08Drivers: hv: Redo Hyper-V synthetic MSR get/set functionsMichael Kelley
Current code defines a separate get and set macro for each Hyper-V synthetic MSR used by the VMbus driver. Furthermore, the get macro can't be converted to a standard function because the second argument is modified in place, which is somewhat bad form. Redo this by providing a single get and a single set function that take a parameter specifying the MSR to be operated on. Fixup usage of the get function. Calling locations are no more complex than before, but the code under arch/x86 and the upcoming code under arch/arm64 is significantly simplified. Also standardize the names of Hyper-V synthetic MSRs that are architecture neutral. But keep the old x86-specific names as aliases that can be removed later when all references (particularly in KVM code) have been cleaned up in a separate patch series. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/r/1614721102-2241-4-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-02-22Merge tag 'timers-urgent-2021-02-22' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A small set of clockevent fixes which fell through the cracks before the 5.11 release: - Ensure a clock is enabled on sh_cmt - Trivial compile fail and compile warning fixes" * tag 'timers-urgent-2021-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled clocksource/drivers/ixp4xx: Select TIMER_OF when needed
2021-02-21Merge tag 'hyperv-next-signed-20210216' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - VMBus hardening patches from Andrea Parri and Andres Beltran. - Patches to make Linux boot as the root partition on Microsoft Hypervisor from Wei Liu. - One patch to add a new sysfs interface to support hibernation on Hyper-V from Dexuan Cui. - Two miscellaneous clean-up patches from Colin and Gustavo. * tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (31 commits) Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer" iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition x86/hyperv: implement an MSI domain for root partition asm-generic/hyperv: import data structures for mapping device interrupts asm-generic/hyperv: introduce hv_device_id and auxiliary structures asm-generic/hyperv: update hv_interrupt_entry asm-generic/hyperv: update hv_msi_entry x86/hyperv: implement and use hv_smp_prepare_cpus x86/hyperv: provide a bunch of helper functions ACPI / NUMA: add a stub function for node_to_pxm() x86/hyperv: handling hypercall page setup for root x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary x86/hyperv: allocate output arg pages if required clocksource/hyperv: use MSR-based access if running as root Drivers: hv: vmbus: skip VMBus initialization if Linux is root x86/hyperv: detect if Linux is the root partition asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT hv: hyperv.h: Replace one-element array with flexible-array in struct icmsg_negotiate hv_netvsc: Restrict configurations on isolated guests Drivers: hv: vmbus: Enforce 'VMBus version >= 5.2' on isolated guests ...
2021-02-11clocksource/hyperv: use MSR-based access if running as rootWei Liu
When Linux runs as the root partition, the setup required for TSC page is different. Luckily Linux also has access to the MSR based clocksource. We can just disable the TSC page clocksource if Linux is the root partition. Signed-off-by: Wei Liu <wei.liu@kernel.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210203150435.27941-5-wei.liu@kernel.org
2021-02-10Merge tag 'timers-v5.12-rc1' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/events updates from Daniel Lezcano: - Drop dead code on efm32 (Uwe Kleine-König) - Move pr_fmt() before the includes on davinci driver (Bartosz Golaszewski) - Clarified timer interrupt must be specified on nuvoton DT bindings (Jonathan Neuschäfer) - Remove tango, sirf, u300 and atlas timer drivers (Arnd Bergman) - Add suspend/resume on pit64b (Claudiu Beznea) Link: https://lore.kernel.org/r/3747fbde-134f-5e1d-47d5-8776c1a52aa1@linaro.org
2021-02-03clocksource/drivers/timer-microchip-pit64b: Add clocksource suspend/resumeClaudiu Beznea
Add suspend/resume support for clocksource timer. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
2021-02-03clocksource/drivers/prima: Remove sirf prima driverArnd Bergmann
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210120131559.1971359-5-arnd@kernel.org
2021-02-03clocksource/drivers/atlas: Remove sirf atlas driverArnd Bergmann
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210120131559.1971359-4-arnd@kernel.org
2021-02-03clocksource/drivers/tango: Remove tango driverArnd Bergmann
The tango platform is getting removed, so the driver is no longer needed. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210120131559.1971359-3-arnd@kernel.org
2021-02-03clocksource/drivers/u300: Remove the u300 driverArnd Bergmann
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210120131559.1971359-2-arnd@kernel.org
2021-01-18clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is definedTom Rix
When DEBUG is defined this error occurs drivers/clocksource/mxs_timer.c:138:1: error: expected ‘;’ before ‘}’ token The preceding statement needs a semicolon. Replace pr_info() with pr_debug() and remove the unneeded ifdef. Fixes: eb8703e2ef7c ("clockevents/drivers/mxs: Migrate to new 'set-state' interface") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210118211955.763609-1-trix@redhat.com
2021-01-18clocksource/drivers/davinci: Move pr_fmt() before the includesBartosz Golaszewski
We no longer need to undef pr_fmt if we define our own before including any headers. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210111140814.3668-1-brgl@bgdev.pl
2021-01-18clocksource/drivers/efm32: Drop unused timer codeUwe Kleine-König
Support for this machine was just removed, so drop the now unused timer code, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210115155130.185010-4-u.kleine-koenig@pengutronix.de
2021-01-18clocksource/drivers/sh_cmt: Make sure channel clock supply is enabledGeert Uytterhoeven
The Renesas Compare Match Timer 0 and 1 (CMT0/1) variants have a register to control the clock supply to the individual channels. Currently the driver does not touch this register, and relies on the documented initial value, which has the clock supply enabled for all channels present. However, when Linux starts on the APE6-EVM development board, only the clock supply to the first CMT1 channel is enabled. Hence the first channel (used as a clockevent) works, while the second channel (used as a clocksource) does not. Note that the default system clocksource is the Cortex-A15 architectured timer, and the user needs to manually switch to the CMT1 clocksource to trigger the broken behavior. Fix this by removing the fragile dependency on implicit reset and/or boot loader state, and by enabling the clock supply explicitly for all channels used instead. This requires postponing the clk_disable() call, else the timer's registers cannot be accessed in sh_cmt_setup_channel(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201210194648.2901899-1-geert+renesas@glider.be
2021-01-18clocksource/drivers/ixp4xx: Select TIMER_OF when neededArnd Bergmann
Compile-testing the ixp4xx timer with CONFIG_OF enabled but CONFIG_TIMER_OF disabled leads to a harmless warning: arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ixp4xx.o' being placed in section `__timer_of_table' Move the select statement from the platform code into the driver so it always gets enabled in configurations that rely on it. Fixes: 40df14cc5cc0 ("clocksource/drivers/ixp4xx: Add OF initialization support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210103135955.3808976-1-arnd@kernel.org
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-12-15Merge tag 'pm-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ...
2020-12-07clocksource/drivers/sh_cmt: Fix potential deadlock when calling runtime PMNiklas Söderlund
The ch->lock is used to protect the whole enable() and read() of sh_cmt's implementation of struct clocksource. The enable() implementation calls pm_runtime_get_sync() which may result in the clock source to be read() triggering a cyclic lockdep warning for the ch->lock. The sh_cmt driver implement its own balancing of calls to sh_cmt_{enable,disable}() with flags in sh_cmt_{start,stop}(). It does this to deal with that start and stop are shared between the clock source and clock event providers. While this could be improved on verifying corner cases based on any substantial rework on all devices this driver supports might prove hard. As a first step separate the PM handling for clock event and clock source. Always put/get the device when enabling/disabling the clock source but keep the clock event logic unchanged. This allows the sh_cmt implementation of struct clocksource to call PM without holding the ch->lock and avoiding the deadlock. Triggering and log of the deadlock warning, # echo e60f0000.timer > /sys/devices/system/clocksource/clocksource0/current_clocksource [ 46.948370] ====================================================== [ 46.954730] WARNING: possible circular locking dependency detected [ 46.961094] 5.10.0-rc6-arm64-renesas-00001-g0e5fd7414e8b #36 Not tainted [ 46.967985] ------------------------------------------------------ [ 46.974342] migration/0/11 is trying to acquire lock: [ 46.979543] ffff0000403ed220 (&dev->power.lock){-...}-{2:2}, at: __pm_runtime_resume+0x40/0x74 [ 46.988445] [ 46.988445] but task is already holding lock: [ 46.994441] ffff000040ad0298 (&ch->lock){....}-{2:2}, at: sh_cmt_start+0x28/0x210 [ 47.002173] [ 47.002173] which lock already depends on the new lock. [ 47.002173] [ 47.010573] [ 47.010573] the existing dependency chain (in reverse order) is: [ 47.018262] [ 47.018262] -> #3 (&ch->lock){....}-{2:2}: [ 47.024033] lock_acquire.part.0+0x120/0x330 [ 47.028970] lock_acquire+0x64/0x80 [ 47.033105] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.038130] sh_cmt_start+0x28/0x210 [ 47.042352] sh_cmt_clocksource_enable+0x28/0x50 [ 47.047644] change_clocksource+0x9c/0x160 [ 47.052402] multi_cpu_stop+0xa4/0x190 [ 47.056799] cpu_stopper_thread+0x90/0x154 [ 47.061557] smpboot_thread_fn+0x244/0x270 [ 47.066310] kthread+0x154/0x160 [ 47.070175] ret_from_fork+0x10/0x20 [ 47.074390] [ 47.074390] -> #2 (tk_core.seq.seqcount){----}-{0:0}: [ 47.081136] lock_acquire.part.0+0x120/0x330 [ 47.086070] lock_acquire+0x64/0x80 [ 47.090203] seqcount_lockdep_reader_access.constprop.0+0x74/0x100 [ 47.097096] ktime_get+0x28/0xa0 [ 47.100960] hrtimer_start_range_ns+0x210/0x2dc [ 47.106164] generic_sched_clock_init+0x70/0x88 [ 47.111364] sched_clock_init+0x40/0x64 [ 47.115853] start_kernel+0x494/0x524 [ 47.120156] [ 47.120156] -> #1 (hrtimer_bases.lock){-.-.}-{2:2}: [ 47.126721] lock_acquire.part.0+0x120/0x330 [ 47.136042] lock_acquire+0x64/0x80 [ 47.144461] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.153721] hrtimer_start_range_ns+0x68/0x2dc [ 47.163054] rpm_suspend+0x308/0x5dc [ 47.171473] rpm_idle+0xc4/0x2a4 [ 47.179550] pm_runtime_work+0x98/0xc0 [ 47.188209] process_one_work+0x294/0x6f0 [ 47.197142] worker_thread+0x70/0x45c [ 47.205661] kthread+0x154/0x160 [ 47.213673] ret_from_fork+0x10/0x20 [ 47.221957] [ 47.221957] -> #0 (&dev->power.lock){-...}-{2:2}: [ 47.236292] check_noncircular+0x128/0x140 [ 47.244907] __lock_acquire+0x13b0/0x204c [ 47.253332] lock_acquire.part.0+0x120/0x330 [ 47.262033] lock_acquire+0x64/0x80 [ 47.269826] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.278430] __pm_runtime_resume+0x40/0x74 [ 47.286758] sh_cmt_start+0x84/0x210 [ 47.294537] sh_cmt_clocksource_enable+0x28/0x50 [ 47.303449] change_clocksource+0x9c/0x160 [ 47.311783] multi_cpu_stop+0xa4/0x190 [ 47.319720] cpu_stopper_thread+0x90/0x154 [ 47.328022] smpboot_thread_fn+0x244/0x270 [ 47.336298] kthread+0x154/0x160 [ 47.343708] ret_from_fork+0x10/0x20 [ 47.351445] [ 47.351445] other info that might help us debug this: [ 47.351445] [ 47.370225] Chain exists of: [ 47.370225] &dev->power.lock --> tk_core.seq.seqcount --> &ch->lock [ 47.370225] [ 47.392003] Possible unsafe locking scenario: [ 47.392003] [ 47.405314] CPU0 CPU1 [ 47.413569] ---- ---- [ 47.421768] lock(&ch->lock); [ 47.428425] lock(tk_core.seq.seqcount); [ 47.438701] lock(&ch->lock); [ 47.447930] lock(&dev->power.lock); [ 47.455172] [ 47.455172] *** DEADLOCK *** [ 47.455172] [ 47.471433] 3 locks held by migration/0/11: [ 47.479099] #0: ffff8000113c9278 (timekeeper_lock){-.-.}-{2:2}, at: change_clocksource+0x2c/0x160 [ 47.491834] #1: ffff8000113c8f88 (tk_core.seq.seqcount){----}-{0:0}, at: multi_cpu_stop+0xa4/0x190 [ 47.504727] #2: ffff000040ad0298 (&ch->lock){....}-{2:2}, at: sh_cmt_start+0x28/0x210 [ 47.516541] [ 47.516541] stack backtrace: [ 47.528480] CPU: 0 PID: 11 Comm: migration/0 Not tainted 5.10.0-rc6-arm64-renesas-00001-g0e5fd7414e8b #36 [ 47.542147] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 47.554241] Call trace: [ 47.560832] dump_backtrace+0x0/0x190 [ 47.568670] show_stack+0x14/0x30 [ 47.576144] dump_stack+0xe8/0x130 [ 47.583670] print_circular_bug+0x1f0/0x200 [ 47.592015] check_noncircular+0x128/0x140 [ 47.600289] __lock_acquire+0x13b0/0x204c [ 47.608486] lock_acquire.part.0+0x120/0x330 [ 47.616953] lock_acquire+0x64/0x80 [ 47.624582] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.633114] __pm_runtime_resume+0x40/0x74 [ 47.641371] sh_cmt_start+0x84/0x210 [ 47.649115] sh_cmt_clocksource_enable+0x28/0x50 [ 47.657916] change_clocksource+0x9c/0x160 [ 47.666165] multi_cpu_stop+0xa4/0x190 [ 47.674056] cpu_stopper_thread+0x90/0x154 [ 47.682308] smpboot_thread_fn+0x244/0x270 [ 47.690560] kthread+0x154/0x160 [ 47.697927] ret_from_fork+0x10/0x20 [ 47.708447] clocksource: Switched to clocksource e60f0000.timer Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201205021921.1456190-2-niklas.soderlund+renesas@ragnatech.se
2020-12-05clocksource/drivers/arm_arch_timer: Correct fault programming of ↵Keqian Zhu
CNTKCTL_EL1.EVNTI ARM virtual counter supports event stream, it can only trigger an event when the trigger bit (the value of CNTKCTL_EL1.EVNTI) of CNTVCT_EL0 changes, so the actual period of event stream is 2^(cntkctl_evnti + 1). For example, when the trigger bit is 0, then virtual counter trigger an event for every two cycles. While we're at it, rework the way we compute the trigger bit position by making it more obvious that when bits [n:n-1] are both set (with n being the most significant bit), we pick bit (n + 1). Fixes: 037f637767a8 ("drivers: clocksource: add support for ARM architected timer event stream") Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201204073126.6920-3-zhukeqian1@huawei.com
2020-12-05clocksource/drivers/arm_arch_timer: Use stable count reader in erratum sneKeqian Zhu
In commit 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters"), we separate stable and normal count reader to omit unnecessary overhead on systems that have no timer erratum. However, in erratum_set_next_event_tval_generic(), count reader becomes normal reader. This converts it to stable reader. Fixes: 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters") Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201204073126.6920-2-zhukeqian1@huawei.com
2020-12-05clocksource/drivers/dw_apb_timer_of: Add error handling if no clock availableDinh Nguyen
commit ("b0fc70ce1f02 arm64: berlin: Select DW_APB_TIMER_OF") added the support for the dw_apb_timer into the arm64 defconfig. However, for some platforms like the Intel Stratix10 and Agilex, the clock manager doesn't get loaded until after the timer driver get loaded. Thus, the driver hits the panic "No clock nor clock-frequency property for" because it cannot properly get the clock. This patch adds the error handling needed for the timer driver so that the kernel can continue booting instead of just hitting the panic. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201205105223.208604-1-dinguyen@kernel.org
2020-12-03clocksource/drivers/riscv: Make RISCV_TIMER depends on RISCV_SBIKefeng Wang
The riscv timer is set via SBI timer call, let's make RISCV_TIMER depends on RISCV_SBI, and it also fixes some build issue. Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems") Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201028131230.72907-1-wangkefeng.wang@huawei.com
2020-12-03clocksource/drivers/ingenic: Fix section mismatchDaniel Lezcano
The function ingenic_tcu_get_clock() is annotated for the __init section but it is actually called from the online cpu callback. That will lead to a crash if a CPU is hotplugged after boot time. Remove the __init annotation for the ingenic_tcu_get_clock() function. Fixes: f19d838d08fc (clocksource/drivers/ingenic: Add high resolution timer support for SMP/SMT) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/20201125102346.1816310-1-daniel.lezcano@linaro.org
2020-12-03clocksource/drivers/cadence_ttc: Fix memory leak in ttc_setup_clockevent()Yu Kuai
If clk_notifier_register() failed, ttc_setup_clockevent() will return without freeing 'ttcce', which will leak memory. Fixes: 70504f311d4b ("clocksource/drivers/cadence_ttc: Convert init function to return error") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201116135123.2164033-1-yukuai3@huawei.com
2020-12-03clocksource/drivers/orion: Add missing clk_disable_unprepare() on error pathYang Yingliang
After calling clk_prepare_enable(), clk_disable_unprepare() need be called on error path. Fixes: fbe4b3566ddc ("clocksource/drivers/orion: Convert init function...") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201111064706.3397156-1-yangyingliang@huawei.com
2020-12-03clocksource/drivers/nps: Remove EZChip NPS clocksource driverVineet Gupta
NPS platform has been removed from ARC port and there are no in-tree users of it now. So RIP ! Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201105212210.1891598-2-vgupta@synopsys.com
2020-12-03clocksource/drivers/sp804: Use pr_fmtKefeng Wang
Add pr_fmt to prefix pr_<level> output. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029123317.90286-5-wangkefeng.wang@huawei.com
2020-12-03clocksource/drivers/sp804: Correct clk_get_rate handleKefeng Wang
clk_get_rate won't return negative value, correct clk_get_rate handle. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029123317.90286-4-wangkefeng.wang@huawei.com
2020-12-03clocksource/drivers/sp804: Use clk_prepare_enable and clk_disable_unprepareKefeng Wang
Directly use clk_prepare_enable and clk_disable_unprepare. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029123317.90286-3-wangkefeng.wang@huawei.com
2020-12-03clocksource/drivers/sp804: Make some symbol staticKefeng Wang
drivers/clocksource/timer-sp804.c:38:31: warning: symbol 'arm_sp804_timer' was not declared. Should it be static? drivers/clocksource/timer-sp804.c:47:31: warning: symbol 'hisi_sp804_timer' was not declared. Should it be static? drivers/clocksource/timer-sp804.c:120:12: warning: symbol 'sp804_clocksource_and_sched_clock_init' was not declared. Should it be static? drivers/clocksource/timer-sp804.c:219:12: warning: symbol 'sp804_clockevents_init' was not declared. Should it be static? And move __initdata after the variables. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029123317.90286-2-wangkefeng.wang@huawei.com
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 02:27:44 +0000