| Age | Commit message (Collapse) | Author |
|---|
|
Pull virtio fixes from Michael Tsirkin:
"Bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix use after free in vhost_vdpa_probe()
virtio_pci: Switch away from deprecated irq_set_affinity_hint
riscv, qemu_fw_cfg: Add support for RISC-V architecture
vdpa_sim_blk: allocate the buffer zeroed
virtio_pci: move structure to a header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for handling misaligned accesses in S-mode
- Probing for misaligned access support is now properly cached and
handled in parallel
- PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions
- Performance improvements for TLB flushing
- Support for many new relocations in the module loader
- Various bug fixes and cleanups
* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
riscv: Optimize bitops with Zbb extension
riscv: Rearrange hwcap.h and cpufeature.h
drivers: perf: Do not broadcast to other cpus when starting a counter
drivers: perf: Check find_first_bit() return value
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
RISC-V: Probe misaligned access speed in parallel
RISC-V: Remove __init on unaligned_emulation_finish()
RISC-V: Show accurate per-hart isa in /proc/cpuinfo
RISC-V: Don't rely on positional structure initialization
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
riscv: split cache ops out of dma-noncoherent.c
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
...
|
|
This patch leverages the alternative mechanism to dynamically optimize
bitops (including __ffs, __fls, ffs, fls) with Zbb instructions. When
Zbb ext is not supported by the runtime CPU, legacy implementation is
used. If Zbb is supported, then the optimized variants will be selected
via alternative patching.
The legacy bitops support is taken from the generic C implementation as
fallback.
If the parameter is a build-time constant, we leverage compiler builtin to
calculate the result directly, this approach is inspired by x86 bitops
implementation.
EFI stub runs before the kernel, so alternative mechanism should not be
used there, this patch introduces a macro NO_ALTERNATIVE for this purpose.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231031064553.2319688-3-xiao.w.wang@intel.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- Move Kconfig files into the pmdomain subsystem
- Drop use of genpd's redundant ->opp_to_performance_state() callback
- amlogic:
- Add support for the T7 power-domains controller
- Fix mask for the second NNA mem power-domain
- bcm: Fixup ASB register read and comparison for bcm2835-power
- imx: Fix device link problem for consumers of the pgc power-domain
- mediatek: Add support for the MT8365 power domains
- qcom:
- Add support for the rpmhpds for SC8380XP power-domains
- Add support for the rpmhpds for SM8650 power-domains
- Add support for the rpmhpd clocks for SM7150
- Add support for the rpmpds for MSM8917 (families) power-domains
- starfive: Add support for the JH7110 AON PMU
* tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits)
pmdomain: amlogic: Fix mask for the second NNA mem PD domain
pmdomain: qcom: rpmhpd: Add SC8380XP power domains
pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains
dt-bindings: power: rpmpd: Add SC8380XP support
dt-bindings: power: qcom,rpmhpd: Add GMXC PD index
dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains
pmdomain: imx: Make imx pgc power domain also set the fwnode
pmdomain: qcom: rpmpd: Add QM215 power domains
pmdomain: qcom: rpmpd: Add MSM8917 power domains
dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215
pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable
pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
pmdomain: Use device_get_match_data()
pmdomain: ti: add missing of_node_put
pmdomain: mediatek: Add support for MT8365
pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
pmdomain: mediatek: Add support for WAY_EN operations
pmdomain: mediatek: Unify configuration for infracfg and smi
...
|
|
Qemu fw_cfg support was missing for RISC-V, which made it hard to do
proper vmcore dumps from qemu.
Add the missing RISC-V arch-defines.
You can now do vmcore dumps from qemu. Add "-device vmcoreinfo" to the
qemu command-line. From the qemu monitor:
(qemu) dump-guest-memory vmcore
The vmcore can now be used, e.g., with the "crash" utility.
Acked-by: "Michael S. Tsirkin" <mst@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Message-Id: <20231012102852.234442-1-bjorn@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Rework PE header generation, primarily to generate a modern, 4k
aligned kernel image view with narrower W^X permissions.
- Further refine init-lifetime annotations
- Misc cleanups & fixes
* tag 'x86-boot-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/boot: efistub: Assign global boot_params variable
x86/boot: Rename conflicting 'boot_params' pointer to 'boot_params_ptr'
x86/head/64: Move the __head definition to <asm/init.h>
x86/head/64: Add missing __head annotation to startup_64_load_idt()
x86/head/64: Mark 'startup_gdt[]' and 'startup_gdt_descr' as __initdata
x86/boot: Harmonize the style of array-type parameter for fixup_pointer() calls
x86/boot: Fix incorrect startup_gdt_descr.size
x86/boot: Compile boot code with -std=gnu11 too
x86/boot: Increase section and file alignment to 4k/512
x86/boot: Split off PE/COFF .data section
x86/boot: Drop PE/COFF .reloc section
x86/boot: Construct PE/COFF .text section from assembler
x86/boot: Derive file size from _edata symbol
x86/boot: Define setup size in linker script
x86/boot: Set EFI handover offset directly in header asm
x86/boot: Grab kernel_info offset from zoffset header directly
x86/boot: Drop references to startup_64
x86/boot: Drop redundant code setting the root device
x86/boot: Omit compression buffer from PE/COFF image memory footprint
x86/boot: Remove the 'bugger off' message
...
|
|
As mentioned in Documentation/process/coding-style.rst:
In source files, separate functions with one blank line. If the function
is exported, the **EXPORT** macro for it should follow immediately after
the closing function brace line.
So inline with guideline move zynqmp_pm_feature export symbol after its
definition.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1698348238-2320426-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms have some last-minute fixes, in particular:
- riscv gets some fixes for noncoherent DMA on the renesas and thead
platforms and dts fix for SPI on the visionfive 2 board
- Qualcomm Snapdragon gets three dts fixes to address board specific
regressions on the pmic and gpio nodes
- Rockchip platforms get multiple dts fixes to address issues on the
recent rk3399 platform as well as the older rk3128 platform that
apparently regressed a while ago.
- TI OMAP gets some trivial code and dts fixes and a regression fix
for the omap1 ams-delta modem
- NXP i.MX firmware has one fix for a use-after-free but in its error
handling"
* tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
riscv: dts: thead: set dma-noncoherent to soc bus
arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
soc: renesas: Make ARCH_R9A07G043 depend on required options
riscv: dts: starfive: visionfive 2: correct spi's ss pin
firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
ARM: dts: rockchip: Fix timer clocks for RK3128
ARM: dts: rockchip: Add missing quirk for RK3128's dma engine
ARM: dts: rockchip: Add missing arm timer interrupt for RK3128
ARM: dts: rockchip: Fix i2c0 register address for RK3128
arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou
arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.7
The Qualcomm SMC an QSEECOM drivers are moved into a "qcom"
subdirectory, to declutter the base directory. Missing include guards
are added to the qseecom header file. Unneded extern specifiers are
removed from the scm call wrappers.
__counted_by is added to the apr_rx_buf structure, in the APR driver.
Lastly in the pmic_glink driver the pmic_glink drm_bridge type is
corrected to DisplayPort, over the incorrect "USB" value. The return
values are added to error prints for the various typec set() calls.
* tag 'qcom-drivers-for-6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
firmware: qcom: qseecom: add missing include guards
Link: https://lore.kernel.org/r/20231025201109.1016121-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/drivers
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 6.7, please pull the following:
- Kieran fixes the kdoc for devm_rpi_firmware_get
- Peter updates the dependices of the brcmstb SoC driver and
brcmstb_gisb drivers which are ARCH_BRCMSTB specific
* tag 'arm-soc/for-6.7/drivers' of https://github.com/Broadcom/stblinux:
bus: brcmstb_gisb: Depend on SoC specifics over generic arm
soc: bcm: brcmstb: depend on ARCH_BRCMSTB over arm arches
firmware: raspberrypi: Fix devm_rpi_firmware_get documentation
Link: https://lore.kernel.org/r/20231024155927.977263-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.7
- Generic fixups: Convert to platform remove callback returning void
- ti_sci: Minor fixups and mark driver as non-removable
- k3-socinfo: Documentation fixups, cosmetic fixups
- knav_qmss_queue: Optimize with device_get_match_data
Signed-off-by: Nishanth Menon <nm@ti.com>
* tag 'ti-driver-soc-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
soc/ti: wkup_m3_ipc: Convert to platform remove callback returning void
soc/ti: smartreflex: Convert to platform remove callback returning void
soc/ti: pruss: Convert to platform remove callback returning void
soc/ti: pm33xx: Convert to platform remove callback returning void
soc/ti: knav_qmss_queue: Convert to platform remove callback returning void
soc/ti: knav_dma: Convert to platform remove callback returning void
soc/ti: k3-ringacc: Convert to platform remove callback returning void
firmware: ti_sci: Mark driver as non removable
firmware: ti_sci: refactor deprecated strncpy
firmware: ti_sci: Use list_for_each_entry() helper
Link: https://lore.kernel.org/r/20231018165226.33x5cjn5jmgnm3di@magnolia
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"The boot_params pointer fix uses a somewhat ugly extern struct
declaration but this will be cleaned up the next cycle.
- don't try to print warnings to the console when it is no longer
available
- fix theoretical memory leak in SSDT override handling
- make sure that the boot_params global variable is set before the
KASLR code attempts to hash it for 'randomness'
- avoid soft lockups in the memory acceptance code"
* tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: Fix soft lockups caused by parallel memory acceptance
x86/boot: efistub: Assign global boot_params variable
efi: fix memory leak in krealloc failure handling
x86/efistub: Don't try to print after ExitBootService()
|
|
'extern' specifiers do nothing for function declarations. Remove them
from the private qcom-scm header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Link: https://lore.kernel.org/r/20231017092732.19983-4-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
We reference struct device in the private scm header but we neither
include linux/device.h nor forward declare it. Fix it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Link: https://lore.kernel.org/r/20231017092732.19983-3-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
We're getting more and more qcom specific .c files in drivers/firmware/
and about to get even more. Create a separate directory for Qualcomm
firmware drivers and move existing sources in there.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Link: https://lore.kernel.org/r/20231017092732.19983-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
|
|
Michael reported soft lockups on a system that has unaccepted memory.
This occurs when a user attempts to allocate and accept memory on
multiple CPUs simultaneously.
The root cause of the issue is that memory acceptance is serialized with
a spinlock, allowing only one CPU to accept memory at a time. The other
CPUs spin and wait for their turn, leading to starvation and soft lockup
reports.
To address this, the code has been modified to release the spinlock
while accepting memory. This allows for parallel memory acceptance on
multiple CPUs.
A newly introduced "accepting_list" keeps track of which memory is
currently being accepted. This is necessary to prevent parallel
acceptance of the same memory block. If a collision occurs, the lock is
released and the process is retried.
Such collisions should rarely occur. The main path for memory acceptance
is the page allocator, which accepts memory in MAX_ORDER chunks. As long
as MAX_ORDER is equal to or larger than the unit_size, collisions will
never occur because the caller fully owns the memory block being
accepted.
Aside from the page allocator, only memblock and deferered_free_range()
accept memory, but this only happens during boot.
The code has been tested with unit_size == 128MiB to trigger collisions
and validate the retry codepath.
Fixes: 2053bc57f367 ("efi: Add unaccepted memory support")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Michael Roth <michael.roth@amd.com
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Michael Roth <michael.roth@amd.com>
[ardb: drop unnecessary cpu_relax() call]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.7
This introduces partial support for the Qualcomm Secure Execution
Environment SCM interface, and uses this to implement EFI variable
access on the Windows On Snapdragon devices (for now).
The 32/64-bit calling convention detector of the SCM interface is
updated to not choose 64-bit convention when Linux is 32-bit. The
"extern" specifier is dropped from the interface include file.
The LLCC driver gains support for carrying configuration for multiple
different system/DDR configurations for a given platform, and selecting
between them. Support for Q[DR]U1000 is added to the driver.
All exported symbols are transitioned to EXPORT_SYMBOL_GPL().
The platform_drivers in the Qualcomm SoC are transitioned to the
void-returning remove_new implementation.
The rmtfs memory driver gains support for leaving guard pages around the
used area, to avoid issues if the allocation happens to be placed
adjacent to another protected memory region.
The socinfo driver gains knowledge about IPQ8174, QCM6490, SM7150P and
various PMICs used together with SM8550.
* tag 'qcom-drivers-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (44 commits)
soc: qcom: socinfo: Convert to platform remove callback returning void
soc: qcom: smsm: Convert to platform remove callback returning void
soc: qcom: smp2p: Convert to platform remove callback returning void
soc: qcom: smem: Convert to platform remove callback returning void
soc: qcom: rmtfs_mem: Convert to platform remove callback returning void
soc: qcom: qcom_stats: Convert to platform remove callback returning void
soc: qcom: qcom_gsbi: Convert to platform remove callback returning void
soc: qcom: qcom_aoss: Convert to platform remove callback returning void
soc: qcom: pmic_glink: Convert to platform remove callback returning void
soc: qcom: ocmem: Convert to platform remove callback returning void
soc: qcom: llcc-qcom: Convert to platform remove callback returning void
soc: qcom: icc-bwmon: Convert to platform remove callback returning void
firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit
soc: qcom: llcc: Handle a second device without data corruption
soc: qcom: Switch to EXPORT_SYMBOL_GPL()
soc: qcom: smem: Annotate struct qcom_smem with __counted_by
soc: qcom: rmtfs: Support discarding guard pages
dt-bindings: reserved-memory: rmtfs: Allow guard pages
dt-bindings: firmware: qcom,scm: document IPQ5018 compatible
firmware: qcom_scm: disable SDI if required
...
Link: https://lore.kernel.org/r/20231015204014.855672-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Now that the x86 EFI stub calls into some APIs exposed by the
decompressor (e.g., kaslr_get_random_long()), it is necessary to ensure
that the global boot_params variable is set correctly before doing so.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
|
|
After the vga console no longer relies on global screen_info, there are
only two remaining use cases:
- on the x86 architecture, it is used for multiple boot methods
(bzImage, EFI, Xen, kexec) to commucate the initial VGA or framebuffer
settings to a number of device drivers.
- on other architectures, it is only used as part of the EFI stub,
and only for the three sysfb framebuffers (simpledrm, simplefb, efifb).
Remove the duplicate data structure definitions by moving it into the
efi-init.c file that sets it up initially for the EFI case, leaving x86
as an exception that retains its own definition for non-EFI boots.
The added #ifdefs here are optional, I added them to further limit the
reach of screen_info to configurations that have at least one of the
users enabled.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231017093947.3627976-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To prepare for completely separating the VGA console screen_info from
the one used in EFI/sysfb, rename the vgacon instances and make them
local as much as possible.
ia64 and arm both have confurations with vgacon and efi, but the contents
never overlaps because ia64 has no EFI framebuffer, and arm only has
vga console on legacy platforms without EFI. Renaming these is required
before the EFI screen_info can be moved into drivers/firmware.
The ia64 vga console is actually registered in two places from
setup_arch(), but one of them is wrong, so drop the one in pcdp.c and
fix the one in setup.c to use the correct conditional.
x86 has to keep them together, as the boot protocol is used to switch
between VGA text console and framebuffer through the screen_info data.
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-7-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vga console driver is fairly self-contained, and only used by
architectures that explicitly initialize the screen_info settings.
Chance every instance that picks the vga console by setting conswitchp
to call a function instead, and pass a reference to the screen_info
there.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Khalid Azzi <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-6-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the x86 EFI stub calls into some APIs exposed by the
decompressor (e.g., kaslr_get_random_long()), it is necessary to ensure
that the global boot_params variable is set correctly before doing so.
Note that the decompressor and the kernel proper carry conflicting
declarations for the global variable 'boot_params' so refer to it via an
alias to work around this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.7:
- correct meson_sm_* API retval handling
- Use device_get_match_data() in meson SM
* tag 'amlogic-drivers-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
firmware: meson: Use device_get_match_data()
drivers: meson: sm: correct meson_sm_* API retval handling
Link: https://lore.kernel.org/r/00ef6ab3-59c1-484a-9d70-50f16e4cc584@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
firmware: tegra: Changes for v6.7-rc1
Contains a typofix and a new mechanism to help fix an issue that can
seemingly hang the system during early resume.
* tag 'tegra-for-6.7-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
firmware: tegra: Add suspend hook and reset BPMP IPC early on resume
firmware: tegra: Fix a typo
Link: https://lore.kernel.org/r/20231013153723.1729109-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm FF-A updates for v6.7
The main addition is the initial support for the notifications and
memory transaction descriptor changes added in FF-A v1.1 specification.
The notification mechanism enables a requester/sender endpoint to notify
a service provider/receiver endpoint about an event with non-blocking
semantics. A notification is akin to the doorbell between two endpoints
in a communication protocol that is based upon the doorbell/mailbox
mechanism.
The framework is responsible for the delivery of the notification from
the ender to the receiver without blocking the sender. The receiver
endpoint relies on the OS scheduler for allocation of CPU cycles to
handle a notification.
OS is referred as the receiver’s scheduler in the context of notifications.
The framework is responsible for informing the receiver’s scheduler that
the receiver must be run since it has a pending notification.
The series also includes support for the new format of memory transaction
descriptors introduced in v1.1 specification.
Apart from the main additions, it includes minor fixes to re-enable FF-A
drivers usage of 32bit mode of messaging and kernel warning due to the
missing assignment of IDR allocation ID to the FFA device. It also adds
emitting 'modalias' to the base attribute of FF-A devices.
* tag 'ffa-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Upgrade the driver version to v1.1
firmware: arm_ffa: Update memory descriptor to support v1.1 format
firmware: arm_ffa: Switch to using ffa_mem_desc_offset() accessor
KVM: arm64: FFA: Remove access of endpoint memory access descriptor array
firmware: arm_ffa: Simplify the computation of transmit and fragment length
firmware: arm_ffa: Add notification handling mechanism
firmware: arm_ffa: Add interface to send a notification to a given partition
firmware: arm_ffa: Add interfaces to request notification callbacks
firmware: arm_ffa: Add schedule receiver callback mechanism
firmware: arm_ffa: Initial support for scheduler receiver interrupt
firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface
firmware: arm_ffa: Implement the FFA_NOTIFICATION_GET interface
firmware: arm_ffa: Implement the FFA_NOTIFICATION_SET interface
firmware: arm_ffa: Implement the FFA_RUN interface
firmware: arm_ffa: Implement the notification bind and unbind interface
firmware: arm_ffa: Implement notification bitmap create and destroy interfaces
firmware: arm_ffa: Update the FF-A command list with v1.1 additions
firmware: arm_ffa: Emit modalias for FF-A devices
firmware: arm_ffa: Allow the FF-A drivers to use 32bit mode of messaging
firmware: arm_ffa: Assign the missing IDR allocation ID to the FFA device
Link: https://lore.kernel.org/r/20231010124354.1620064-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.7
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
* tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits)
firmware: arm_scmi: Add qcom smc/hvc transport support
dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI
firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke()
clk: scmi: Add support for clock {set,get}_parent
firmware: arm_scmi: Add support for clock parents
clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped
firmware: arm_scpi: Use device_get_match_data()
firmware: arm_scmi: Add generic OPP support to the SCMI performance domain
firmware: arm_scmi: Specify the performance level when adding an OPP
firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21}
firmware: arm_scmi: Do not use !! on boolean when setting msg->flags
firmware: arm_scmi: Move power-domain driver to the pmdomain dir
pmdomain: arm: Add the SCMI performance domain
...
Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006224638.445168-1-robh@kernel.org
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.6, round 2:
- Fix an use_after_free bug in imx_dsp_setup_channels() that is
introduced by commit e527adfb9b7d ("firmware: imx-dsp: Fix an error
handling path in imx_dsp_setup_channels()")
* tag 'imx-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
Link: https://lore.kernel.org/r/20231015090202.GW819755@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp'
to mark if BPMP is suspended. Also, add a 'flags' field in the
'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be
set from the Tegra MC driver to signal that the reset of BPMP IPC
channels is required before sending MRQ to the BPMP FW. Together both
the fields allow us to handle any requests that might be sent too soon
as they can cause hang during system resume.
One case where we see BPMP requests being sent before the BPMP driver
has resumed is the memory bandwidth requests which are triggered by
onlining the CPUs during system resume. The CPUs are onlined before the
BPMP has resumed and we need to reset the BPMP IPC channels to handle
these requests.
The additional check for 'flags' is done to avoid any un-intended BPMP
IPC reset if the tegra_bpmp_transfer*() API gets called during suspend
sequence after the BPMP driver is suspended.
Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
Co-developed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
In the previous code, there was a memory leak issue where the
previously allocated memory was not freed upon a failed krealloc
operation. This patch addresses the problem by releasing the old memory
before setting the pointer to NULL in case of a krealloc failure. This
ensures that memory is properly managed and avoids potential memory
leaks.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
setup_e820() is executed after UEFI's ExitBootService has been called.
This causes the firmware to throw an exception because the Console IO
protocol is supposed to work only during boot service environment. As
per UEFI 2.9, section 12.1:
"This protocol is used to handle input and output of text-based
information intended for the system user during the operation of code
in the boot services environment."
So drop the diagnostic warning from this function. We might add back a
warning that is issued later when initializing the kernel itself.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
dsp_chan->name and chan_name points to same block of memory,
because dev_err still needs to be used it,so we need free
it's memory after use to avoid use_after_free.
Fixes: e527adfb9b7d ("firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This change adds the support for SCMI message exchange on Qualcomm
virtual platforms.
The hypervisor associates an object-id also known as capability-id
with each smc/hvc doorbell object. The capability-id is used to
identify the doorbell from the VM's capability namespace, similar
to a file-descriptor.
The hypervisor, in addition to the function-id, expects the capability-id
to be passed in x1 register when SMC/HVC call is invoked.
The capability-id is allocated by the hypervisor on bootup and is stored in
the shmem region by the firmware before starting Linux.
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20231009191437.27926-3-quic_nkela@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
arm_smccc_1_1_invoke()
All the parameters to arm_smccc_1_1_invoke() are unsigned long which
aligns well on both 32-bit and 64-bit Arm based platforms. Let us store
all the members in the structure scmi_smc used as the parameters to the
arm_smccc_1_1_invoke() call as unsigned long.
Cc: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20231009152049.1428872-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The function documentation for devm_rpi_firmware_get() was missing
a description for the dev parameter.
Provide it and clear the warning produced here.
Fixes: f663204c9a1f ("firmware: raspberrypi: Introduce devm_rpi_firmware_get()")
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/20230925151812.142480-1-kieran.bingham+renesas@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231006224644.445295-1-robh@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
With quite a few v1.1 features supported, we can bump the driver version
to v1.1 now.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-17-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Update memory transaction descriptor structure to accommodate couple of
new entries in v1.1 which were previously marked reserved and MBZ(must
be zero).
It also removes the flexible array member ep_mem_access in the memory
transaction descriptor structure as it need not be at fixed offset.
Also update ffa_mem_desc_offset() accessor to handle both old and new
formats of memory transaction descriptors.
The updated ffa_mem_region structure aligns with new format in v1.1 and
hence the driver/user must take care not to use members beyond and
including ep_mem_offset when using the old format.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-16-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
In preparation to add support to the new memory transaction descriptor,
the ep_mem_access member needs to be removed and hence even the macro
COMPOSITE_OFFSET(). Let us switch to using the new ffa_mem_desc_offset()
accessor in ffa_setup_and_transmit().
This will enable adding the support for new format transparently without
any changes here again.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-15-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
SCMI v3.2 spec introduces CLOCK_POSSIBLE_PARENTS_GET, CLOCK_PARENT_SET
and CLOCK_PARENT_GET. Add support for these to enable clock parents
and use them in the clock driver.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20231004-scmi-clock-v3-v5-1-1b8a1435673e@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231006224650.445424-1-robh@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The computation of endpoint memory access descriptor's composite memory
region descriptor offset is using COMPOSITE_CONSTITUENTS_OFFSET which is
unnecessary complicated. Composite memory region descriptor always follow
the endpoint memory access descriptor array and hence it is computed
accordingly. COMPOSITE_CONSTITUENTS_OFFSET is useless and wrong for any
input other than endpoint memory access descriptor count.
Let us drop the usage of COMPOSITE_CONSTITUENTS_OFFSET to simplify the
computation of total transmit and fragment length in the memory
transactions.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-13-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
With all the necessary plumbing in place, let us add handling the
notifications as part of schedule receiver interrupt handler. In order
to do so, we need to just register scheduling callback on behalf of the
driver partition.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-12-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
