| Age | Commit message (Collapse) | Author |
|---|
|
We want single instance of reset sem across all
reset clients because in case of XGMI we should stop
access cross device MMIO because any of them could be
in a reset in the moment.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://www.spinics.net/lists/amd-gfx/msg74117.html
|
|
When a GPU hits the bad_page_threshold, it will not be initialized by
the amdgpu driver. This means that the table cannot be cleared, nor can
information gathering be performed (getting serial number, BDF, etc).
If the bad_page_threshold kernel parameter is set to -2,
continue to initialize the GPU, while printing a warning to dmesg that
this action has been done
v2: squash in Luben's fix to restore RAS info reporting
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dmesg doesn't warn when the number of bad pages approaches the
threshold for page retirement. WARN when the number of bad pages
is at 90% or greater for easier checks and planning, instead of waiting
until the GPU is full of bad pages.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Change the error message when the bad_page_threshold is reached,
explicitly stating that the GPU will not be initialized.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This was unusual; normally, inline functions are declared static as
well, and defined in a header file if used by multiple compilation
units. The latter would be more involved in this case, so just drop
the inline declaration for now.
Fixes compile failure building for ppc64le on RHEL 8:
In file included from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.h:32,
from ../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:33:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_recovery_init’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.h:90:17: error: inlining failed in call
to ‘always_inline’ ‘amdgpu_ras_eeprom_max_record_count’: function body not available
90 | inline uint32_t amdgpu_ras_eeprom_max_record_count(void);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1985:34: note: called from here
1985 | max_eeprom_records_len = amdgpu_ras_eeprom_max_record_count();
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: c84d46707ebb "drm/amdgpu: validate bad page threshold in ras(v3)"
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We can now process any RAS EEPROM address from
VBIOS. Generalize so as to compute the top three
bits of the 19-bit EEPROM address, from any byte
returned as the "i2c address" from VBIOS.
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
update to latest atombios fw table
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If copy_to_user() fails then this should return -EFAULT instead of
-EINVAL.
Fixes: c65b0805e77919 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This error path needs to unlock before returning. While we're at it,
the correct error code from copy_to_user() failure is -EFAULT, not
-EINVAL.
Fixes: c65b0805e77919 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If amdgpu_eeprom_read() returns a negative error code then the error
handling checks:
if (res < buf_size) {
The problem is that "buf_size" is a u32 so negative values are type
promoted to a high positive values and the condition is false. Fix
this by changing the type of "buf_size" to int.
Fixes: 63d4c081a556a1 ("drm/amdgpu: Optimize EEPROM RAS table I/O")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
pos is 64 bits.
Fixes: c65b0805e77919 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Cc: luben.tuikov@amd.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add "ras_eeprom_size" file in debugfs, which
reports the maximum size allocated to the RAS
table in EEROM, as the number of bytes and the
number of records it could store. For instance,
$cat /sys/kernel/debug/dri/0/ras/ras_eeprom_size
262144 bytes or 10921 records
$_
Add "ras_eeprom_table" file in debugfs, which
dumps the RAS table stored EEPROM, in a formatted
way. For instance,
$cat ras_eeprom_table
Signature Version FirstOffs Size Checksum
0x414D4452 0x00010000 0x00000014 0x000000EC 0x000000DA
Index Offset ErrType Bank/CU TimeStamp Offs/Addr MemChl MCUMCID RetiredPage
0 0x00014 ue 0x00 0x00000000607608DC 0x000000000000 0x00 0x00 0x000000000000
1 0x0002C ue 0x00 0x00000000607608DC 0x000000001000 0x00 0x00 0x000000000001
2 0x00044 ue 0x00 0x00000000607608DC 0x000000002000 0x00 0x00 0x000000000002
3 0x0005C ue 0x00 0x00000000607608DC 0x000000003000 0x00 0x00 0x000000000003
4 0x00074 ue 0x00 0x00000000607608DC 0x000000004000 0x00 0x00 0x000000000004
5 0x0008C ue 0x00 0x00000000607608DC 0x000000005000 0x00 0x00 0x000000000005
6 0x000A4 ue 0x00 0x00000000607608DC 0x000000006000 0x00 0x00 0x000000000006
7 0x000BC ue 0x00 0x00000000607608DC 0x000000007000 0x00 0x00 0x000000000007
8 0x000D4 ue 0x00 0x00000000607608DD 0x000000008000 0x00 0x00 0x000000000008
$_
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Xinhui Pan <xinhui.pan@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Split functionality between read and write, which
simplifies the code and exposes areas of
optimization and more or less complexity, and take
advantage of that.
Read and write the table in one go; use a separate
stage to decode or encode the data, as opposed to
on the fly, which keeps the I2C bus busy. Use a
single read/write to read/write the table or at
most two if the number of records we're
reading/writing wraps around.
Check the check-sum of a table in EEPROM on init.
Update the checksum at the same time as when
updating the table header signature, when the
threshold was increased on boot.
Take advantage of arithmetic modulo 256, that is,
use a byte!, to greatly simplify checksum
arithmetic.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The code is now tested from userspace.
Remove already macroed out test function.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Qualify with "ras_". Use kernel's own--don't
redefine your own.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
buff --> buf. Essentially buffer abbreviates to
buf, remove 1/2 of it, or just the iron part, as
opposed to just the Er,
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
RAS_MAX_RECORD_NUM may mean the maximum record
number, as in the maximum house number on your
street, or it may mean the maximum number of
records, as in the count of records, which is also
a number. To make this distinction whether the
number is ordinal (index) or cardinal (count),
rename this macro to RAS_MAX_RECORD_COUNT.
This makes it easy to understand what it refers
to, especially when we compute quantities such as,
how many records do we have left in the table,
especially when there are so many other numbers,
quantities and numerical macros around.
Also rename the long,
amdgpu_ras_eeprom_get_record_max_length() to the
more succinct and clear,
amdgpu_ras_eeprom_max_record_count().
When computing the threshold, which also deals
with counts, i.e. "how many", use cardinal
"max_eeprom_records_count", than the quantitative
"max_eeprom_records_len".
Simplify the logic here and there, as well.
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: John Clements <john.clements@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename update_table_header() to
write_table_header() as this function is actually
writing it to EEPROM.
Use kernel types; use u8 to carry around the
checksum, in order to take advantage of arithmetic
modulo 8-bits (256).
Tidy up to 80 columns.
When updating the checksum, just recalculate the
whole thing.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to account for the 2 bytes of EEPROM
address--this is now well abstracted away by
the fixes the the lower layers.
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The low level EEPROM write method, doesn't return
1, but the number of bytes written. Thus do not
compare to 1, instead, compare to greater than 0
for success.
Other cleanup: if the lower layers returned
-errno, then return that, as opposed to
overwriting the error code with one-fits-all
-EINVAL. For instance, some return -EAGAIN.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add explicit amdgpu_eeprom_read() and
amdgpu_eeprom_write() for clarity.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Wrap amdgpu_ras_eeprom_xfer(..., bool write),
into amdgpu_ras_eeprom_read() and
amdgpu_ras_eeprom_write(), as that makes reading
and understanding the code clearer.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of fixing the spelling in
amdgpu_ras_eeprom_process_recods(),
rename it to,
amdgpu_ras_eeprom_xfer(),
to look similar to other I2C and protocol
transfer (read/write) functions.
Also to keep the column span to within reason by
using a shorter name.
Change the "num" function parameter from "int" to
"const u32" since it is the number of items
(records) to xfer, i.e. their count, which cannot
be a negative number.
Also swap the order of parameters, keeping the
pointer to records and their number next to each
other, while the direction now becomes the last
parameter.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In amdgpu_ras_eeprom.c--the interface from RAS to
EEPROM, rename macros from EEPROM to RAS, to
indicate that the quantities and objects are RAS
specific, not EEPROM. We can decrease the RAS
table, or put it in different offset of EEPROM as
needed in the future.
Remove EEPROM_ADDRESS_SIZE macro definition, equal
to 2, from the file and calculations, as that
quantity is computed and added on the stack,
in the lower layer, amdgpu_eeprom_xfer().
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the size of the EEPROM from 256000 bytes
to 262144 bytes (256 KiB).
Fix a couple or wrap around bugs. If a valid
value/address is 0 <= addr < size, the inverse of
this inequality (barring negative values which
make no sense here) is addr >= size. Fix this in
the RAS code.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Convert RAS and FRU code to use the 19-bit I2C
memory address and remove all "slave_addr", as
this is now absolved into the 19-bit address.
Cc: Jean Delvare <jdelvare@suse.de>
Cc: John Clements <john.clements@amd.com>
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Lijo Lazar <Lijo.Lazar@amd.com>
Cc: Stanley Yang <Stanley.Yang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Convert from 8 bit to 7 bit.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
|
|
Use the new helper rather than doing i2c transfers directly.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
|
|
enable ras eeprom loading by default on aldebaran
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
cause:
It is necessary to send ras disable command to ras-ta during gfx
block ras later init, because the ras capability is disable read
from vbios for vega20 gaming, but the ras context is released
during ras init process, this will cause send ras disable command
to ras-to failed.
how:
Delay releasing ras context, the ras context
will be released after gfx block later init done.
Changed from V1:
move release_ras_context into ras_resume
Changed from V2:
check BIT(UMC) is more reasonable before access eeprom table
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In passthrough configuration, hypervisior will trigger the SBR(Secondary bus reset) to the devices
without sync to each other. This could cause device hang since for XGMI configuration, all the devices
within the hive need to be reset at a limit time slot. This serial of patches try to solve this issue
by co-operate with new SMU which will only do minimum house keeping to response the SBR request but don't
do the real reset job and leave it to driver. Driver need to do the whole sw init and minimum HW init
to bring up the SMU and trigger the reset(possibly BACO) on all the ASICs at the same time
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Andrey Grodzovsky andrey.grodzovsky@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the number of badpage records exceed the threshold, driver has
updated both epprom header and control->tbl_hdr.header before gpu reset,
therefore GPU recovery thread no need to read epprom header directly.
v2: merge amdgpu_ras_check_err_threshold into amdgpu_ras_eeprom_check_err_threshold
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
added I2C address and asic support flag
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
General code indentation and alignment changes such as replace spaces
by tabs or align function arguments as per the coding style
guidelines. The patch corrects issues for various amdgpu_*.c files
for this driver. Issue reported by checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Because bad pages saving has been moved to UMC error interrupt callback,
which will trigger a new GPU reset after saving.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <hawking.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
because i2c is unstable in GPU reset, driver need protect
eeprom update from GPU reset, to not miss any bad page record.
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
updated RAS EEPROM init/threshold sequences to check for device support
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
During driver's probe, when it hits bad gpu tag in eeprom i2c
init calling(the tag was set when reported bad page reaches
bad page threshold in last driver's working loop), there are
some strategys to deal with the cases:
1. when the module parameter amdgpu_bad_page_threshold = 0,
that means page retirement feature is disabled, so just resetting
the eeprom is fine.
2. When amdgpu_bad_page_threshold is not 0, and moreover, user
sets one bigger valid data in order to make current boot up
succeeds, correct eeprom header tag and do not break booting.
3. For other cases, driver's probe will be broken.
v2: Just update eeprom header tag instead of resetting the whole
table header when user sets one bigger threshold data.
v3: Use dev_info/dev_err to print PCI device information, which
helps in mGPU case.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When GPU executes recovery and retriving bad GPU tag
from external eerpom device, the recovery will be broken
and error message is printed as well for user's awareness.
v2: Refine warning message in threshold reaching case, and
fix spelling typo.
v3: Fix explicit calling of bad gpu.
v4: Rename function names.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Once the bad page saved to eeprom reaches the configured
threshold, ras recovery will be issued to notify user.
v2: Fix spelling typo.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When retrieving bad gpu tag from eeprom, GPU init should
fail as the GPU needs to be retired for further check.
v2: Fix spelling typo, correct the condition to detect
bad gpu tag and refine error message.
v3: Refine function argument name.
v4: Fix missing check of returning value of i2c
initialization error case.
v5: Use dev_err to print PCI information in dmesg instead
of DRM_ERROR.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This tag will be hired for bad gpu detection in eeprom's access.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Bad page threshold value should be valid in the range between
-1 and max records length of eeprom. It could determine when
saved bad pages exceed threshold value, and proceed corresponding
actions.
v2: When using the default typical value, it should be min
value between typical value and eeprom max records length.
v3: drop the case of setting bad_page_cnt_threshold to be
0xFFFFFFFF, as it confuses user.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Puts the i2c adapter in common place for sharing by RAS
and upcoming data read from FRU EEPROM feature.
v2:
Move i2c adapter to amdgpu_pm and rename it.
v3: Move i2c adapter init to ASIC specific code and get rid
of the switch case in amdgpu_device
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check Arcturus SKU type to select I2C address of page retirement EEPROM
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Updated target I2C address
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add Arcturus EEPROM/I2C support in generic EEPROM code.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to define the same variables in each loop of the function.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix checksum calculation after manually resetting the table.
Unify reset and empty EEPROM init flow.
Protect the table reset with lock.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will allow to reset the table on the fly.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
