summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
AgeCommit message (Collapse)Author
2024-04-26drm/amdgpu: add protype for print ip stateSunil Khatri
Add the protoype for print ip state to be used to print the registers in devcoredump during a gpu reset. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amdgpu: add prototype for ip dumpSunil Khatri
Add the prototype to dump ip registers for all ips of different asics and set them to NULL for now. Based on the requirement add a function pointer for each of them. Signed-off-by: Sunil Khatri <sunil.khatri@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-26drm/amdgpu: Fix the ring buffer size for queue VM flushPrike Liang
Here are the corrections needed for the queue ring buffer size calculation for the following cases: - Remove the KIQ VM flush ring usage. - Add the invalidate TLBs packet for gfx10 and gfx11 queue. - There's no VM flush and PFP sync, so remove the gfx9 real ring and compute ring buffer usage. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-22drm/amdgpu: Fix truncation issues in gfx_v9_0.cSrinivasan Shanmugam
The size of fw_name is increased to ensure that it can accommodate the maximum possible size of the string being written into it. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c: In function ‘gfx_v9_0_early_init’: drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1255 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name); | ^~ ...... 1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1255:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 1255 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1261 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name); | ^~ ...... 1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1261:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30 1261 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:52: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1267 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name); | ^~ ...... 1393 | r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1267:9: note: ‘snprintf’ output between 15 and 44 bytes into a destination of size 30 1267 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1303 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name); | ^~ ...... 1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1303:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30 1303 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc_am4.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1309 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name); | ^~ ...... 1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1309:17: note: ‘snprintf’ output between 23 and 52 bytes into a destination of size 30 1309 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_kicker_rlc.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1311 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~ ...... 1398 | r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1311:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 1311 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1344 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name); | ^~ ...... 1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1344:17: note: ‘snprintf’ output between 20 and 49 bytes into a destination of size 30 1344 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:60: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1346 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~ ...... 1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1346:17: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 30 1346 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1356 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name); | ^~ ...... 1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1356:25: note: ‘snprintf’ output between 21 and 50 bytes into a destination of size 30 1356 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_sjt_mec2.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:68: warning: ‘%s’ directive output may be truncated writing up to 29 bytes into a region of size 23 [-Wformat-truncation=] 1358 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name); | ^~ ...... 1402 | r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix); | ~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:1358:25: note: ‘snprintf’ output between 17 and 46 bytes into a destination of size 30 1358 | snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2.bin", chip_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-06drm/amdgpu: disable ring_muxer if mcbp is offPierre-Eric Pelloux-Prayer
Using the ring_muxer without preemption adds overhead for no reason since mcbp cannot be triggered. Moving back to a single queue in this case also helps when high priority app are used: in this case the gpu_scheduler priority handling will work as expected - much better than ring_muxer with its 2 independant schedulers competing for the same hardware queue. This change requires moving amdgpu_device_set_mcbp above amdgpu_device_ip_early_init because we use adev->gfx.mcbp. Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amdgpu: cleanup conditional executionChristian König
First of all calculating the number of dw to patch into a conditional execution is not something HW generation specific. This is just standard ring buffer calculations. While at it also reduce the BUG_ON() into WARN_ON(). Then instead of a random bit pattern use 0 as default value for the number of dw skipped, this way it's not mandatory any more to patch the conditional execution. And last make the address to check a parameter of the conditional execution instead of getting this from the ring. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-22drm/amdgpu: Drop redundant parameter in amdgpu_gfx_kiq_init_ringMa Jun
Drop redundant parameters in function amdgpu_gfx_kiq_init_ring to simplify the code Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-07drm/amdgpu: skip to program GFXDEC registers for suspend abortPrike Liang
In the suspend abort cases, the gfx power rail doesn't turn off so some GFXDEC registers/CSB can't reset to default value and at this moment reinitialize GFXDEC/CSB will result in an unexpected error. So let skip those program sequence for the suspend abort case. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-18drm/amd/amdgpu: Update RLC_SPM_MC_CNT by ring wreg in guestYuanShang
Submit command of wreg in GFX and COMPUTE ring to update RLC_SPM_MC_CNT in guest machine during runtime. Signed-off-by: YuanShang <YuanShang.Mao@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-11-29drm/amdgpu: fix memory overflow in the IB testTim Huang
Fix a memory overflow issue in the gfx IB test for some ASICs. At least 20 bytes are needed for the IB test packet. v2: correct code indentation errors. (Christian) Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-20drm/amdgpu: Use function for IP version checkLijo Lazar
Use an inline function for version check. Gives more flexibility to handle any format changes. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-11drm/amdgpu: Store CU info from all XCCs for GFX v9.4.3Mukul Joshi
Currently, we store CU info only for a single XCC assuming that it is the same for all XCCs. However, that may not be true. As a result, store CU info for all XCCs. This info is later used for CU masking. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06drm/amdgpu: Declare array with strings as pointers constantSrinivasan Shanmugam
This warning is for the declaration of a static array, and it is recommended to declare it as type "static const char * const" instead of "static const char *". an array pointer declared as type "static const char *" can point to a different character constant because the pointer is mutable. However, if it is declared as type "static const char * const", the pointer will point to an immutable character constant, preventing it from being modified which can better ensure the safety and stability of the program. Fixes the below: WARNING: static const char * array should probably be static const char * const Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-27drm/amdgpu: set completion status as preempted for the resubmissionJiadong Zhu
The driver's CSA buffer is shared by all the ibs. When the high priority ib is submitted after the preempted ib, CP overrides the ib_completion_status as completed in the csa buffer. After that the preempted ib is resubmitted, CP would clear some locals stored for ib resume when reading the completed status, which causes gpu hang in some cases. Always set status as preempted for those resubmitted ib instead of reading everything from the CSA buffer. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2717 Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18drm/amdgpu: Add RLCG interface driver implementation for gfx v9.4.3 (v3)Victor Lu
Add RLCG interface support for gfx v9.4.3 and multiple XCCs. Do not enable it yet. v2: Fix amdgpu_rlcg_reg_access_ctrl init, add support for multiple XCCs in amdgpu_mm_wreg_mmio_rlc v3: Use GET_INST() when indexing amdgpu_rlcg_reg_access_ctrl Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Zhigang Luo <zhigang.luo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-12drm/amdgpu/gfx9: move update_spm_vmid() out of rlc_init()Alex Deucher
rlc_init() is part of sw_init() so it should not touch hardware. Additionally, calling the rlc update_spm_vmid() callback directly invokes a gfx on/off cycle which could result in powergating being enabled before hw init is complete. Split update_spm_vmid() into an internal implementation for local use without gfxoff interaction and then the rlc callback which includes gfxoff handling. lbpw_init also touches hardware so mvoe that to rlc_resume as well. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Implement gfx9 patch functions for resubmissionJiadong Zhu
Patch the packages including CONTEXT_CONTROL and WRITE_DATA for gfx9 during the resubmission scenario. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2"Alex Deucher
This reverts commit f03eb1d26c2739b75580f58bbab4ab2d5d3eba46. This results in inconsistent timing reported via asynchronous GPU queries. Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html Cc: Jesse.Zhang@amd.com Cc: michel@daenzer.net Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according ↵Alex Deucher
to revision id" This reverts commit 9d2d1827af295fd6971786672c41c4dba3657154. This results in inconsistent timing reported via asynchronous GPU queries. Link: https://lists.freedesktop.org/archives/amd-gfx/2023-May/093731.html Cc: Jesse.Zhang@amd.com Cc: michel@daenzer.net Reviewed-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add gfx9.4.1 hw debug mode enable and disable callsJonathan Kim
On GFX9.4.1, the implicit wait count instruction on s_barrier is disabled by default in the driver during normal operation for performance requirements. There is a hardware bug in GFX9.4.1 where if the implicit wait count instruction after an s_barrier instruction is disabled, any wave that hits an exception may step over the s_barrier when returning from the trap handler with the barrier logic having no ability to be aware of this, thereby causing other waves to wait at the barrier indefinitely resulting in a shader hang. This bug has been corrected for GFX9.4.2 and onward. Since the debugger subscribes to hardware exceptions, in order to avoid this bug, the debugger must enable implicit wait count on s_barrier for a debug session and disable it on detach. In order to change this setting in the in the device global SQ_CONFIG register, the GFX pipeline must be idle. GFX9.4.1 as a compute device will either dispatch work through the compute ring buffers used for image post processing or through the hardware scheduler by the KFD. Have the KGD suspend and drain the compute ring buffer, then suspend the hardware scheduler and block any future KFD process job requests before changing the implicit wait count setting. Once set, resume all work. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: setup hw debug registers on driver initializationJonathan Kim
Add missing debug trap registers references and initialize all debug registers on boot by clearing the hardware exception overrides and the wave allocation ID index. The debugger requires that TTMPs 6 & 7 save the dispatch ID to map waves onto dispatch during compute context inspection. In order to correctly set this up, set the special reserved CP bit by default whenever the MQD is initailized. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Program gds backup address as zero if no gds allocatedJiadong Zhu
It is firmware requirement to set gds_backup_addrlo and gds_backup_addrhi of DE meta both zero if no gds partition is allocated for the frame. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Reset CP_VMID_PREEMPT after trailing fence signaledJiadong Zhu
When MEC executes unmap_queue for mid command buffer preemption, it will kick the write pointer of the gfx ring, set CP_VMID_PREEMPT to trigger the preemption and wait for CP_VMID_PREEMPT becomes zero after the preemption done. There is a race condition that PFP may excute the resetting command before MEC set CP_VMID_PREEMPT. As a result, hang happens as CP_VMID_PREEMPT is always 0xffff. To avoid this, we send resetting CP_VMID_PREEMPT command after the trailing fence is siganled and update gfx write pointer explicitly. Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/gfx: set sched.ready status after ring/IB test in gfxGuchun Chen
sched.ready is nothing with ring initialization, it needs to set to be true after ring/IB test in amdgpu_ring_test_helper to tell the ring is ready for submission. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm:amd:amdgpu: Fix missing buffer object unlock in failure pathSukrut Bellary
smatch warning - 1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. 2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: add instance mask for RAS injectTao Zhou
User can specify injected instances by the mask. For backward compatibility, the mask value is incorporated into sub block index without interface change of RAS TA. User uses logical mask and driver should convert it to physical value before sending it to RAS TA. v2: update parameter name. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amd/amdgpu: Update debugfs for XCC support (v3)Tom St Denis
This patch updates the 'regs2' interface for MMIO registers to add a new IOCTL command for a 'v2' state data that includes the XCC ID. This patch then updates amdgpu_gfx_select_se_sh() and amdgpu_gfx_select_me_pipe_q() (and the implementations in the gfx drivers) to support an additional parameter. This patch then creates a new debugfs interface "gprwave" which is a merge of shader GPR and wave status access. This new inteface uses an IOCTL to select banks as well as XCC identity. (v2) Fix missing xcc_id in wave_ind function (v3) Fix pm runtime calls and mutex locking (v4) Fix bad label Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Change num_xcd to xcc_maskLijo Lazar
Instead of number of XCCs, keep a mask of XCCs for the exact XCCs available on the ASIC. XCC configuration could differ based on different ASIC configs. v2: Rename num_xcd to num_xcc (Hawking) Use smaller xcc_mask size, changed to u16 (Le) Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: introduce vmhub definition for multi-partition cases (v3)Hawking Zhang
v1: Each partition has its own gfxhub or mmhub. adjust the num of MAX_VMHUBS and the GFXHUB/MMHUB layout (Le) v2: re-design the AMDGPU_GFXHUB/AMDGPU_MMHUB layout (Le) v3: apply the gfxhub/mmhub layout to new IPs (Hawking) v4: fix up gmc11 (Alex) v5: rebase (Alex) Signed-off-by: Le Ma <le.ma@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to ↵Jesse Zhang
revision id Due to the raven2 and raven/picasso maybe have the same GC_HWIP version. So differentiate them by revision id. Signed-off-by: shanshengwang <shansheng.wang@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx rasGuchun Chen
gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert. So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq should be executed under such condition, otherwise, an amdgpu_irq_put calltrace will occur. [ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246 [ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000 [ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d89da20000 [ 7283.170971] RBP: ffff98d89da20000 R08: ffff98d89da2ca18 R09: 0000000000000006 [ 7283.170973] R10: ffffd5764243c008 R11: 0000000000000000 R12: 0000000000001050 [ 7283.170975] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.170978] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.170981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.170983] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.170986] Call Trace: [ 7283.170988] <TASK> [ 7283.170989] gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu] [ 7283.171655] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.172245] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.172823] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.173412] pci_pm_freeze+0x54/0xc0 [ 7283.173419] ? __pfx_pci_pm_freeze+0x10/0x10 [ 7283.173425] dpm_run_callback+0x98/0x200 [ 7283.173430] __device_suspend+0x164/0x5f0 v2: drop gfx11 as it's fixed in a different solution by retiring cp_ecc_irq funcs(Hawking) Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-09drm/amdgpu/gfx9: always restore kcq MQDsAlex Deucher
Always restore the MQD not just when we do a reset. This allows us to move the MQD to VRAM if we want. v2: always reset ring pointer as well (Christian) Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-20drm/amdgpu: initialize num_xcd to 1 for gfx v9_0Le Ma
Assign value here as the num_xcd is referenced in some gfx9 common path. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: add xcc index argument to rlc safe_mode func (v4)Le Ma
v1: To support multple XCD case (Le) v2: unify naming style (Le) v3: apply the changes to gc v11_0 (Hawking) v4: apply the changes to gc SOC21 (Morris) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Morris Zhang <Shiwu.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: add xcc index argument to select_sh_se function v2Le Ma
v1: To support multiple XCD case (Le) v2: introduce xcc index to gfx_v11_0_select_sh_se (Hawking) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: add xcc index argument to soc15_grbm_selectLe Ma
To support grbm select for multiple XCD case. v2: unify naming style Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: add multi-xcc support to amdgpu_gfx interfaces (v4)Le Ma
v1: Modify kiq_init/fini, mqd_sw_init/fini and enable/disable_kcq to adapt to multi-die case. Pass 0 as default to all asics with single xcc (Le) v2: squash commits to avoid breaking the build (Le) v3: unify naming style (Le) v4: apply the changes to gc v11_0 (Hawking) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: move queue_bitmap to an independent structure (v3)Le Ma
To allocate independent queue_bitmap for each XCD, then the old bitmap policy can be continued to use with a clear logic. Use mec_bitmap[0] as default for all non-GC 9.4.3 IPs. v2: squash commits to avoid breaking the build v3: unify naming style Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-18drm/amdgpu: convert gfx.kiq to array type (v3)Le Ma
v1: more kiq instances are a available in SOC (Le) v2: squash commits to avoid breaking the build (Le) v3: make the conversion for gfx/mec v11_0 (Hawking) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-14drm/amdgpu: move vmhub out of amdgpu_ring_funcs (v4)Le Ma
It looks better to place this field in ring structure. Also drop the repeated ring funcs definitions if there's no difference except for vmhub field. v2: rename the field to vm_hub like others (Le) v3: apply the changes to new ip blocks (Hawking) v4: fix vcn sw ring (Alex) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-04-13drm/amdgpu: switch to golden tsc registers for raven/raven2Jesse Zhang
Due to raven/raven2 maybe enable  sclk slow down, they cannot get clock count by the RLC at the auto level of dpm performance. So switch to golden tsc register. Suggested-by: shanshengwang <shansheng.wang@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-08amd/amdgpu: remove test ib on hw ringJesseZhang
test ib function is not necessary on hw ring, so remove it. v2: squash in NULL check fix Signed-off-by: JesseZhang <Jesse.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-17drm/amdgpu: Optimize gfx ras block initialization code for gfx v9_0YiPeng Chai
Use gfx ras common initialization interface to initialize gfx ras block. V2: Update function call due to amdgpu_gfx_ras_sw_init interface changes. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd: fix some dead code in `gfx_v9_0_init_cp_compute_microcode`Mario Limonciello
Some dead code was introduced as part of utilizing the `amdgpu_ucode_*` helpers. Adjust the control flow to make sure that firmware is released in the appropriate error flows. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1530548 ("Control flow issues") Fixes: ec787deb2ddf ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX9") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-09drm/amd: Load GFX9 microcode during early_initMario Limonciello
If GFX9 microcode is required but not available during early init, the firmware framebuffer will have already been released and the screen will freeze. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-09drm/amd: Use `amdgpu_ucode_*` helpers for GFX9Mario Limonciello
The `amdgpu_ucode_request` helper will ensure that the return code for missing firmware is -ENODEV so that early_init can fail. The `amdgpu_ucode_release` helper will provide symmetry on unload. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-03drm/amdgpu: use VRAM|GTT for a bunch of kernel allocationsChristian König
Technically all of those can use GTT as well, no need to force things into VRAM. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-02drm/amdgpu: MCBP based on DRM scheduler (v9)Jiadong.Zhu
Trigger Mid-Command Buffer Preemption according to the priority of the software rings and the hw fence signalling condition. The muxer saves the locations of the indirect buffer frames from the software ring together with the fence sequence number in its fifo queue, and pops out those records when the fences are signalled. The locations are used to resubmit packages in preemption scenarios by coping the chunks from the software ring. v2: Update comment style. v3: Fix conflict caused by previous modifications. v4: Remove unnecessary prints. v5: Fix corner cases for resubmission cases. v6: Refactor functions for resubmission, calling fence_process in irq handler. v7: Solve conflict for removing amdgpu_sw_ring.c. v8: Add time threshold to judge if preemption request is needed. v9: Correct comment spelling. Set fence emit timestamp before rsu assignment. Cc: Christian Koenig <Christian.Koenig@amd.com> Cc: Luben Tuikov <Luben.Tuikov@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-02drm/amdgpu: Modify unmap_queue format for gfx9 (v6)Jiadong.Zhu
1. Modify the unmap_queue package on gfx9. Add trailing fence to track the preemption done. 2. Modify emit_ce_meta emit_de_meta functions for the resumed ibs. v2: Restyle code not to use ternary operator. v3: Modify code format. v4: Enable Mid-Command Buffer Preemption for gfx9 by default. v5: Optimize the flag bit set for emit_fence. v6: Modify log message for preemption timeout. Cc: Christian Koenig <Christian.Koenig@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Luben Tuikov <Luben.Tuikov@amd.com> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-12-02drm/amdgpu: Add software ring callbacks for gfx9 (v8)Jiadong.Zhu
Set ring functions with software ring callbacks on gfx9. The software ring could be tested by debugfs_test_ib case. v2: Set sw_ring 2 to enable software ring by default. v3: Remove the parameter for software ring enablement. v4: Use amdgpu_ring_init/fini for software rings. v5: Update for code format. Fix conflict. v6: Remove unnecessary checks and enable software ring on gfx9 by default. v7: Use static array for software ring names and priorities. v8: Stop creating software rings if no gfx ring existed. Cc: Christian Koenig <Christian.Koenig@amd.com> Cc: Luben Tuikov <Luben.Tuikov@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-03-30 16:08:22 +0000