| Age | Commit message (Collapse) | Author |
|---|
|
Use amdgpu_gmc_vram_pa and amdgpu_gmc_vram_cpu_pa
to simplify codes. No logic change.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mmhub ras is only avaiable in cerntain mmhub ip
generation.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently the ! operator is incorrectly being used to flip bits on
mask values. Fix this by using the bit-wise ~ operator instead.
Addresses-Coverity: ("Logical vs. bitwise operator")
Fixes: 3c9a7b7d6e7520 ("drm/amdgpu: update mmhub mgcg&ls for mmhub_v2_3")
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Starting from vangogh, the ATCL2 and DAGB0 registers relative
to mgcg/ls has changed.
For MGCG:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.
For MGLS:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.
Add DAGB0_(WR/RD)_CGTT_CLK_CTRL registers.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
global noretry setting is cached to gmc.noretry
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace hardcoded vmid number with AMDGPU_NUM_VMID macro.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Just a small optimization for accessing system pages directly.
Was missed for gmc v10 since the feature landed for older gmcs
while we were still on the emulator or gmc10 and we use the AGP
aperture for zfb on the emulator.
v2: fix up the system aperture as well
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are too many register offset mismatch between mmhub v2.0 and v2.3.
E.X:
mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3)
mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3)
mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32: 0x072b(v2.0) 0x0940(v2.3)
mmMMVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32: 0x072c(v2.0) 0x0941(v2.3)
mmMMVM_INVALIDATE_ENG0_REQ: 0x06e3(v2.0) 0x0a01(v2.3)
mmMMVM_INVALIDATE_ENG0_ACK: 0x06f5(v2.0) 0x0a02(v2.3)
mmMMVM_CONTEXT0_CNTL: 0x06c0(v2.0) 0x0740(v2.3)
mmMMVM_L2_PROTECTION_FAULT_STATUS: 0x068c(v2.0) 0x070c(v2.3)
mmMMVM_L2_PROTECTION_FAULT_CNTL: 0x0688(v2.0) 0x0708(v2.3)
mmMM_ATC_L2_MISC_CG: 0x064a(v2.0) 0x06cd(v2.3)
mmDAGB0_CNTL_MISC2: 0x0071(v2.0) 0x0096(v2.3)
...
Continuing using the same file mmhub v2.0 is not good choice, it will
introduce a lot of checking with ASIC types. And also easy to introduce the
issues that offset not align, this kind of issues are really hard to find. Van
Gogh's mmhub vm invalidation is actually caused by the offset mismatch as well.
So it would like to create a new file rather than stick to re-use orignal mmhub
v2.0 here.
v2: add missed translate_further programming.
v3: sync with latest code
v4: add missing callbacks
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
