Age | Commit message (Collapse) | Author |
|
Commit 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
uncovered a bug in amdgpu that required a reordering of the driver
init sequence to avoid accessing a special register on the GPU
before it was properly set up leading to an PCI AER error. This
reordering uncovered a different hw programming ordering dependency
in some APUs where the SDMA doorbells need to be programmed before
the GFX doorbells. To fix this, move the SDMA doorbell programming
back into the soc15 common code, but use the actual doorbell range
values directly rather than the values stored in the ring structure
since those will not be initialized at this point.
This is a partial revert, but with the doorbell assignment
fixed so the proper doorbell index is set before it's used.
Fixes: e3163bc8ffdfdb ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: skhan@linuxfoundation.org
|
|
Update all SDMA versions that support SR-IOV to properly
tear down the ttm buffer functions on suspend.
Tested-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Switch all of the SDMA implementations to use the helper to
tear down the ttm buffer manager.
Tested-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix init SDMA microcode error for sdma v4, which caused by mistake when
rearch sdma init microcode function (coding 4.2.2 to 4.2.0).
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use common function to init sdma v4 firmware ucode.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there. In my
testing at least I don't see any problems on SDMA.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return the value sdma_v4_0_start() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use ring structure to access the cpu/gpu address of rptr/wptr.
v2: merge gfx10/sdma5/sdma5.2 patches
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes the issue where the driver miscomputes the 64-bit
values of the wptr of the SDMA doorbell when initializing the
hardware. SDMA engines v4 and later on have full 64-bit registers for
wptr thus they should be set properly.
Older generation hardwares like CIK / SI have only 16 / 20 / 24bits
for the WPTR, where the calls of lower_32_bits() will be removed in a
following patch.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With this, we can support more CG flags.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only GFX ring, SDMA ring and VCN decode ring support secure submission
at the moment.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Define amdgpu_ras_block_late_fini_default in amdgpu_ras.c as
.ras_fini common function, which is called when
.ras_fini of ras block isn't initialized.
2. Remove the code of using amdgpu_ras_block_late_fini to
initialize .ras_fini in ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
block
Remove redundant calls of amdgpu_ras_block_late_fini in sdma ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
centrally calls the .ras_fini function of all ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Move the variables of ras block instance members from
specific xxx_ras_fini to general ras_fini call.
2. Function calls inside the modules only use parameters
passed from xxx_ras_fini instead of ras block instance
members.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Modify .ras_fini function pointer parameter so that
we can remove redundant intermediate calls in some
ras blocks.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Define amdgpu_ras_late_init to call all ras blocks' .ras_late_init.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Move calling ras block instance members from module internal
function to the top calling xxx_ras_late_init.
2. Module internal function calls can only use parameter variables
of xxx_ras_late_init instead of ras block instance members.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
code
Optimize amdgpu_sdma_ras_late_init/amdgpu_sdma_ras_fini function code.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1. Define amdgpu_ras_block_late_init to create sysfs nodes
and interrupt handles.
2. Define amdgpu_ras_block_late_fini to remove sysfs nodes
and interrupt handles.
3. Replace ras block variable members in struct
amdgpu_ras_block_object with struct ras_common_if, which
can make it easy to associate each ras block instance
with each ras block functional interface.
4. Add .ras_cb to struct amdgpu_ras_block_object.
5. Change each ras block to fit for the changement of struct
amdgpu_ras_block_object.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
SDMA ring buffer test failed if suspend is aborted during
S0i3 resume.
[How]
If suspend is aborted for some reason during S0i3 resume
cycle, it follows SDMA ring test failing and errors in amdgpu
resume. For RN/CZN/Picasso, SMU saves and restores SDMA
registers during S0ix cycle. So, skipping SDMA suspend and
resume from driver solves the issue. This time, the system
is able to resume gracefully even the suspend is aborted.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rajib Mahapatra <rajib.mahapatra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the code style warnings in sdma:
1. WARNING: Missing a blank line after declarations.
2. ERROR: that open brace { should be on the previous line.
3. WARNING: unnecessary whitespace before a quoted newline.
4. ERROR: space required after that ',' (ctx:VxV).
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
1.Modify sdma block to fit for the unified ras block data and ops.
2.Change amdgpu_sdma_ras_funcs to amdgpu_sdma_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of sdma ras variable so that sdma ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register sdma ras block into amdgpu device ras block link list.
5.Remove the redundant code about sdma in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of sdma versions. If .ras_late_init and .ras_fini had been defined by the selected sdma version, the defined functions will take effect; if not defined, default fill them with amdgpu_sdma_ras_late_init and amdgpu_sdma_ras_fini.
v2: squash in warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow us to query instances versions more cleanly.
Instancing support is not consistent unfortunately. SDMA is a
good example. Sienna cichlid has 4 total SDMA instances, each
enumerated separately (HWIDs 42, 43, 68, 69). Arcturus has 8
total SDMA instances, but they are enumerated as multiple
instances of the same HWIDs (4x HWID 42, 4x HWID 43). UMC
is another example. On most chips there are multiple
instances with the same HWID. This allows us to support both
forms.
v2: rebase
v3: clarify instancing support
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Handled by IP discovery now.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Reset SDMA RAS error counts during init only if persistent
EDC harvesting is not supported.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Without driver loaded, SDMA0_UTCL1_PAGE.TMZ_ENABLE is set to 1
by default for all asic. On Raven/Renoir, the sdma goldsetting
changes SDMA0_UTCL1_PAGE.TMZ_ENABLE to 0.
This patch restores SDMA0_UTCL1_PAGE.TMZ_ENABLE to 1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:764: warning: expecting prototype for sdma_v4_0_page_ring_set_wptr(). Prototype was for sdma_v4_0_ring_set_wptr() instead
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:830: warning: expecting prototype for sdma_v4_0_ring_set_wptr(). Prototype was for sdma_v4_0_page_ring_set_wptr() instead
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct and init the sdma4.x irq.num_types.
v2: squash in fix (Alex)
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Change the print level into debug.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Extending this timeout will prevent IH from storm interrupts coming
from SDMA while a page fault is active. Currently, on Aldebaran,
handling that many interrupts can take a lot of CPU time
(up to 4 seconds).
This eventually causes timeouts in other tasks.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow separate ring to share the same scheduler score.
No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This causes infinite retries on the UTCL1 RB, preventing
higher priority RB such as paging RB.
[How]
Set to one the SDMAx_UTLC1_TIMEOUT registers for all SDMAs.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
sdma ras function is the main structure to support
sdma ras on aldebaran. the patch initializes late_init
late_fini callbacks.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li<Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
perform one-time initialization for sdma registers
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
declare sdma firmware binary file for aldebaran
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add sdma firmware load support for soc model
v2: drop some emulator leftovers (Alex)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add initial sdma support for aldebaran, and this asic has 5 sdma instances.
v2: remove adundant condition check
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Evan Quan <Evan.Quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add VM_HOLE/DOORBELL_INVALID_BE/POLL_TIMEOUT/SRBMWRITE
interrupt info printing.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA 4_x asics share the same MGCG/MGLS setting.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:2252:40-45: WARNING: conversion
to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove hdp_flush function from amdgpu_nbio struct as it have been unified
into hdp struct.
Remove the include about hdp register which was not used.
V2: Remove hdp golden setting which is unnecessary.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:848: warning: Function parameter or member 'job' not described in 'sdma_v4_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:848: warning: Function parameter or member 'flags' not described in 'sdma_v4_0_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:923: warning: Function parameter or member 'addr' not described in 'sdma_v4_0_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:923: warning: Function parameter or member 'seq' not described in 'sdma_v4_0_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:923: warning: Function parameter or member 'flags' not described in 'sdma_v4_0_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:923: warning: Excess function parameter 'fence' description in 'sdma_v4_0_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1117: warning: Function parameter or member 'ring' not described in 'sdma_v4_0_rb_cntl'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1117: warning: Function parameter or member 'rb_cntl' not described in 'sdma_v4_0_rb_cntl'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1581: warning: Function parameter or member 'timeout' not described in 'sdma_v4_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1682: warning: Function parameter or member 'value' not described in 'sdma_v4_0_vm_write_pte'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1682: warning: Excess function parameter 'addr' description in 'sdma_v4_0_vm_write_pte'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1682: warning: Excess function parameter 'flags' description in 'sdma_v4_0_vm_write_pte'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1734: warning: Function parameter or member 'ring' not described in 'sdma_v4_0_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1782: warning: Function parameter or member 'vmid' not described in 'sdma_v4_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1782: warning: Function parameter or member 'pd_addr' not described in 'sdma_v4_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1782: warning: Excess function parameter 'vm' description in 'sdma_v4_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:2508: warning: Function parameter or member 'ib' not described in 'sdma_v4_0_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:2508: warning: Function parameter or member 'tmz' not described in 'sdma_v4_0_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:2508: warning: Excess function parameter 'ring' description in 'sdma_v4_0_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:2534: warning: Function parameter or member 'ib' not described in 'sdma_v4_0_emit_fill_buffer'
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:2534: warning: Excess function parameter 'ring' description in 'sdma_v4_0_emit_fill_buffer'
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The KFDTopologyTest.BasicTest will failed if skip smc, sdma, sos, ta
and asd fw in SRIOV for vega10, so adjust above fw and skip load them
in SRIOV only for navi12.
v2: remove unnecessary asic type check.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When declaring pointer data, the "*" symbol should be used adjacent to
the data name as per the coding standards. This resolves following
issues reported by checkpatch script:
ERROR: "foo * bar" should be "foo *bar"
ERROR: "foo * bar" should be "foo *bar"
ERROR: "foo* bar" should be "foo *bar"
ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize the SDMA IP for green_sardine.
v2: use apu flags
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
smc, sdma, sos, ta and asd fw is not used in SRIOV. Skip them to
accelerate sw_init for navi12.
v2: skip above fw in SRIOV for vega10 and sienna_cichlid
v3: directly skip psp fw loading in SRIOV
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1003:4-9: WARNING: Comparison to bool
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1083:5-11: WARNING: Comparison to bool
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SDMA utilization calculations are enabled/disabled by
writing to SDMAx_PUB_DUMMY_REG2 register. Currently,
enable this only for Arcturus.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|