Age | Commit message (Collapse) | Author |
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.7-rc1:
drm-misc-next-2023-10-19 + following:
UAPI Changes:
Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.
Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.
Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
|
|
Rather than doing this in the IP code for the SDMA paging
engine, move it up to the core device level init level.
This should fix the scheduler init ordering.
v2: drop extra parens
v3: drop SDMA helpers
v4: Added a Fixes tag because amdgpu dereferences an uninitialized
scheduler without this patch, and this patch fixes this. (Luben)
Tested-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20231025171928.3318505-1-alexander.deucher@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Fixes: 56e449603f0ac5 ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The error path for SDMA firmware loading is unnecessarily noisy.
When a firmware is missing 3 errors show up:
```
amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_sdma.bin failed with error -2
[drm:sdma_v4_0_early_init [amdgpu]] *ERROR* Failed to load sdma firmware!
[drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <sdma_v4_0> failed -19
```
The error code for the device init is bubbled up already, remove the
second one.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use an inline function for version check. Gives more flexibility to
handle any format changes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Now the SDMA firmware can support SDMA MGCG properly,
so let's enable it from the driver side.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will simplify code.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
sched.ready is nothing with ring initialization, it needs to set
to be true after ring/IB test in amdgpu_ring_test_helper to tell
the ring is ready for submission.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1: Each partition has its own gfxhub or mmhub. adjust
the num of MAX_VMHUBS and the GFXHUB/MMHUB layout (Le)
v2: re-design the AMDGPU_GFXHUB/AMDGPU_MMHUB layout (Le)
v3: apply the gfxhub/mmhub layout to new IPs (Hawking)
v4: fix up gmc11 (Alex)
v5: rebase (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It looks better to place this field in ring
structure. Also drop the repeated ring funcs definitions
if there's no difference except for vmhub field.
v2: rename the field to vm_hub like others (Le)
v3: apply the changes to new ip blocks (Hawking)
v4: fix vcn sw ring (Alex)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Simplifies the code so that all SDMA versions will get the firmware
name from `amdgpu_ucode_ip_version_decode`.
v2: squash in fix from Srinivasan
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit e5d59cfa330523e47cba62a496864acc3948fc27.
This is no longer needed since we no longer suspend SDMA during
S0ix.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update all SDMA versions that support SR-IOV to properly
tear down the ttm buffer functions on suspend.
Tested-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Switch all of the SDMA implementations to use the helper to
tear down the ttm buffer manager.
Tested-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Under SRIOV, SDMA engine is shared between VFs. Therefore,
we will not stop SDMA during hw_fini. This is not an issue
with normal dirver loading and unloading.
- However, when we put the SDMA engine to suspend state and resume
it, the issue starts to show up. Something could attempt to use
that SDMA engine to clear or move memory before the engine is
initialized since the DRM entity is still there.
- Therefore, we will call sdma_v5_2_enable(false) during hw_fini,
and if we are under SRIOV, we will call sdma_v5_2_enable(true)
afterwards to allow other VFs to use SDMA. This way, the DRM
entity of SDMA engine is emptied and it will follow the flow
of resume code path.
Tested-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use common function to init sdma v5 firmware ucode.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Return the value sdma_v5_2_start() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit b992a19085885c096b19625a85c674cb89829ca1.
This causes regression in GPU reset related test.
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: ricetons@gmail.com
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Setting the HALT bit of SDMA_F32_CNTL in all paths before programming
the ring buffer of the SDMA engine.
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add MES support for sdma ib test.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add MES support for sdma ring test.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
From IH ring buffer, look up the coresponding kernel queue and process.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Associate mes queue id with fence, so that EOP trap handler can look up
which queue issues the fence.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize sdma mqd according to ring settings.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use ring structure to access the cpu/gpu address of rptr/wptr.
v2: merge gfx10/sdma5/sdma5.2 patches
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch fixes the issue where the driver miscomputes the 64-bit
values of the wptr of the SDMA doorbell when initializing the
hardware. SDMA engines v4 and later on have full 64-bit registers for
wptr thus they should be set properly.
Older generation hardwares like CIK / SI have only 16 / 20 / 24bits
for the WPTR, where the calls of lower_32_bits() will be removed in a
following patch.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Haohui Mai <ricetons@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
With this, we can support more CG flags.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only GFX ring, SDMA ring and VCN decode ring support secure submission
at the moment.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds support for sdma 5.2.6.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize SDMA engine firmware loading.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will make it easier to add new firmwares in the future.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Recently, there is security policy update under SRIOV.
We need to filter the registers that hit the violation
and move the code to the host driver side so that
the guest driver can execute correctly.
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes various warnings relating to erroneous docstring syntax, of
which some are listed below:
warning: Function parameter or member 'adev' not described in
'amdgpu_atomfirmware_ras_rom_addr'
...
warning: expecting prototype for amdgpu_atpx_validate_functions().
Prototype was for amdgpu_atpx_validate() instead
...
warning: Excess function parameter 'mem' description in 'amdgpu_preempt_mgr_new'
...
warning: Cannot understand * @kfd_get_cu_occupancy - Collect number of
waves in-flight on this device
...
warning: This comment starts with '/**', but isn't a kernel-doc
comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow us to query instances versions more cleanly.
Instancing support is not consistent unfortunately. SDMA is a
good example. Sienna cichlid has 4 total SDMA instances, each
enumerated separately (HWIDs 42, 43, 68, 69). Arcturus has 8
total SDMA instances, but they are enumerated as multiple
instances of the same HWIDs (4x HWID 42, 4x HWID 43). UMC
is another example. On most chips there are multiple
instances with the same HWID. This allows us to support both
forms.
v2: rebase
v3: clarify instancing support
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Handled by IP discovery now.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use IP versions rather than asic_type to differentiate
IP version specific features.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the s2idle stress test sdma resume fail occasionally,in the
failed case GPU is in the gfxoff state.This issue may introduce
by firmware miss handle doorbell S/R and now temporary fix the issue
by forcing exit gfxoff for sdma resume.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is a statement that is indented incorrectly. Clean it up.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
They are initalized by hardware during power up phase,
starting from sdma v5_2 generation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In SRIOV environment, KMD should access SDMA registers
through RLCG if GC indirect access flag enabled.
Using _SOC15 read/write macros ensures that they go
through RLC when the flag is enabled.
Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds the sdma v5.2 support for yellow carp.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-adjust the function return order to avoid empty sdma version in the
sriov environment. (read amdgpu_firmware_info)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:501: warning: expecting prototype for sdma_v_0_ctx_switch_enable(). Prototype was for sdma_v5_2_ctx_switch_enable() instead
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This unfortunately comes up in regular intervals and breaks
GPU reset for the engine in question.
The sched.ready flag controls if an engine can't get working
during hw_init, but should never be set to false during hw_fini.
v2: squash in unused variable fix (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable sdma block for beige_goby, same as sienna_cichlid
v2: share the same setting of sdma instance num with vangogh
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add flags AMD_CG_SUPPORT_SDMA_LS for Vangogh.
Start to open sdma ls from firmware version 70.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add flags AMD_CG_SUPPORT_SDMA_MGCG for Vangogh.
Start to open sdma mgcg from firmware version 70.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add emit mem sync callback for sdma_v5_2
In amdgpu sync object test, three threads created jobs
to send GFX IB and SDMA IB in sequence. After the first
GFX thread joined, sometimes the third thread will reuse
the same physical page to store the SDMA IB. There will
be a risk that SDMA will read GFX IB in the previous physical
page. So it's better to flush the cache before commit sdma IB.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow separate ring to share the same scheduler score.
No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:1621:40-45: WARNING: conversion
to bool not needed here.
./drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:1619:40-45: WARNING: conversion
to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|