| Age | Commit message (Collapse) | Author |
|---|
|
Fixes: f7ba887f606b ("drm/amdgpu: Adjust logic around GTT size (v3)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
root cause that S2A need to use deduct offset flag.
after setting this flag, vcn0 doorbell value works.
so return it as before
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
So before returning from amdgpu_device_resume|suspend_display_audio(),
pci_dev_put() is called to avoid refcount leak.
Fixes: 3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We can reuse the same buffers on resume.
v2: squash in S4 fix from Shikai
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2213
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
If mes enabled, reserve VM invalidation engine 5 for firmware.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.2-2022-11-18:
amdgpu:
- SR-IOV fixes
- Clean up DC checks
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- Don't enable degamma on asics which don't support it
- IP discovery fixes
- BACO fixes
- Fix vbios allocation handling when vkms is enabled
- Drop buggy tdr advanced mode GPU reset handling
- Fix the build when DCN is not set in kconfig
- MST DSC fixes
- Userptr fixes
- FRU and RAS EEPROM fixes
- VCN 4.x RAS support
- Aldrebaran CU occupancy reporting fix
- PSP ring cleanup
amdkfd:
- Memory limit fix
- Enable cooperative launch on gfx 10.3
amd-drm-next-6.2-2022-11-11:
amdgpu:
- SMU 13.x updates
- GPUVM TLB race fix
- DCN 3.1.4 updates
- DCN 3.2.x updates
- PSR fixes
- Kerneldoc fix
- Vega10 fan fix
- GPUVM locking fixes in error pathes
- BACO fix for Beige Goby
- EEPROM I2C address cleanup
- GFXOFF fix
- Fix DC memory leak in error pathes
- Flexible array updates
- Mtype fix for GPUVM PTEs
- Move Kconfig into amdgpu directory
- SR-IOV updates
- Fix possible memory leak in CS IOCTL error path
amdkfd:
- Fix possible memory overrun
- CRIU fixes
radeon:
- ACPI ref count fix
- HDA audio notifier support
- Move Kconfig into radeon directory
UAPI:
- Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI.
These are used internally in the driver to align location based memory coherency
requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They
are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now.
They are just used internally in the kernel driver for now for existing KFD memory
allocations. So a change to the UAPI header, but no functional change in the UAPI.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
All of the IP specific versions are the same now, so
we can just use a common function.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This matches what we do for psp 3.1 and makes ring_init
common for all PSP versions.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow user to know number of compute units (CU) that are in use at any
given moment. Enable access to the method kgd_gfx_v9_get_cu_occupancy
that computes CU occupancy.
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Register related irq handler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Register irq handler.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize JPEG RAS structure and add error query interface.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Initialize VCN RAS structure and add RAS status query function.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make the code reusable.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So the code can be reused.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set support flag for VCN/JPEG 4.0.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The patch is enabling mode-1 reset for RAS recovery in fatal error mode.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for RAS table at I2C EEPROM address of 0x40000, since on some
ASICs it is not at 0, but at 0x40000.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Don't assume FRU MCU memory locations for the FRU data fields, or their sizes,
instead read and interpret the IPMI data, as stipulated in the IPMI spec
version 1.0 rev 1.2.
Extract the Product Name, Product Part/Model Number, and the Product Serial
Number by interpreting the IPMI data.
Check the checksums of the stored IPMI data to make sure we don't read and
give corrupted data back the the user.
Eliminate small I2C reads, and instead read the whole Product Info Area in one
go, and then extract the information we're seeking from it.
Eliminates a whole function, making this file smaller.
v2: Clarify changes in the commit message.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set the new correct default FRU MCU I2C address for newer ASICs, so that we
can correctly read the Product Name, Product Part/Model Number and Serial
Number.
On newer ASICs, the FRU MCU was moved to I2C address 0x58.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow non-standard EEPROM I2C address of 0x58, where the Device Type
Identifier is 1011b, where we form 1011000b = 0x58 I2C address, as on some
ASICs the FRU data lives there.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Tested-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove unused parameters and cleanup dead code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clean that up a bit, no functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The basic problem here is that it's not allowed to page fault while
holding the reservation lock.
So it can happen that multiple processes try to validate an userptr
at the same time.
Work around that by putting the HMM range object into the mutex
protected bo list for now.
v2: make sure range is set to NULL in case of an error
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since switching to HMM we always need that because we no longer grab
references to the pages.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- atomic-helper: Add begin_fb_access and end_fb_access hooks
- fb-helper: Rework to move fb emulation into helpers
- scheduler: rework entity flush, kill and fini
- ttm: Optimize pool allocations
Driver Changes:
- amdgpu: scheduler rework
- hdlcd: Switch to DRM-managed resources
- ingenic: Fix registration error path
- lcdif: FIFO threshold tuning
- meson: Fix return type of cvbs' mode_valid
- ofdrm: multiple fixes (kconfig, types, endianness)
- sun4i: A100 and D1 support
- panel:
- New Panel: Jadard JD9365DA-H3
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110083612.g63eaocoaa554soh@houat
|
|
The state of VRAM is unreliable due to a PCI event like AER, link reset
or DPC.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Re-submitting IBs by the kernel has many problems because pre-
requisite state is not automatically re-created as well. In
other words neither binary semaphores nor things like ring
buffer pointers are in the state they should be when the
hardware starts to work on the IBs again.
Additional to that even after more than 5 years of
developing this feature it is still not stable and we have
massively problems getting the reference counts right.
As discussed with user space developers this behavior is not
helpful in the first place. For graphics and multimedia
workloads it makes much more sense to either completely
re-create the context or at least re-submitting the IBs
from userspace.
For compute use cases re-submitting is also not very
helpful since userspace must rely on the accuracy of
the result.
Because of this we stop this practice and instead just
properly note that the fence submission was canceled. The
only use case we keep the re-submission for now is SRIOV
and function level resets.
v2: as suggested by Sshaoyun stop resubmitting jobs even for SRIOV
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit e6c6338f393b74ac0b303d567bb918b44ae7ad75.
This feature basically re-submits one job after another to
figure out which one was the one causing a hang.
This is obviously incompatible with gang-submit which requires
that multiple jobs run at the same time. It's also absolutely
not helpful to crash the hardware multiple times if a clean
recovery is desired.
For testing and debugging environments we should rather disable
recovery alltogether to be able to inspect the state with a hw
debugger.
Additional to that the sw implementation is clearly buggy and causes
reference count issues for the hardware fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
recovery is completed
Amdgpu_ras_set_error_query_ready is called at the start of
amdgpu_device_gpu_recover to disable query ras error, but the
code behind only enables query ras error in full reset path,
but not in soft reset path, emergency restart path and skip
the hardware reset path.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If we enable virtual display functionality on parts with
no display hardware we can end up trying to check for and
reserve the vbios FB area on devices where it doesn't exist.
Check if display hardware is actually present on the hardware
before trying to reserve the memory.
v2: move the check into common code
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is to resolve a regression, which fails to allocate
VRAM due to no free memory in application, the reason
is we add check of vram_pin_size for memory limit, and
application is pinning the memory for Peerdirect, KFD
should not count it in memory limit. So removing
vram_pin_size will resolve it.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add umc channel index mapping table for umc_v8_10.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
change the vangogh family to use IP discovery path to initialize IP
list, this needs to remove the DID from the PCI ID list to allow the IP
discovery path to set all the IP versions correctly.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the missing apu flag for Vangogh when using IP discovery code path
to initialize IPs
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
TA firmware loaded on psp v13_0_10, but it is missing in modinfo.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are several places where we don't want to check
if a particular asic could support DC, but rather, if
DC is enabled. Set a flag if DC is enabled and check
for that rather than if a device supports DC or not.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move it into the DCE code for each generation. This avoids
confusion with the different display paths.
v2: no need for a hotplug worker for vkms
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
virtual display is enabled unconditionally in SR-IOV, but
without specifying the virtual_display module, the number
of crtcs defaults to 0. Set a single display by default
for SR-IOV if the virtual_display parameter is not set.
Only enable virtual display by default on SR-IOV on asics
which actually have display hardware.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_device_asic_has_dc_support() just checks the asic itself.
amdgpu_device_has_dc_support() is a runtime check which not
only checks the asic, but also other things in the driver
like whether virtual display is enabled. We want the latter
here.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
GCMC_VM related registers should be programmed by PSP on host side.
L1 and RLCG will block these regisers on VF.
[How]
Remove programming GCMC_VM_FB_LOCATION_BASE/TOP on gfxhub_v3_0_3 under SRIOV VF.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Do not clear kiq position in RLC_CP_SCHEDULER so that CP could perform
IDLE-SAVE after VF fini. CPG also needs to be active in save command.
v2: drop unused variable (Alex)
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When p->gang_size equals 0, amdgpu_cs_pass1() will return directly
without freeing chunk_array, which will cause a memory leak issue,
this patch fixes it.
Fixes: 4624459c84d7 ("drm/amdgpu: add gang submit frontend v6")
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move TMR region from top of FB to 2MB for FFBM, so we need to
reserve TMR region firstly to make sure TMR can be allocated at 2MB
Signed-off-by: Tong Liu01 <Tong.Liu01@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The initialized status indicates RAS TA is loaded, but in some cases
(such as RAS fatal error) RAS TA could be destroyed although it's not
unloaded. Hence we load RAS TA unconditionally here.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If discovery is set to 2 in module parameters explicitly, the
intention is to use the discovery file in FW rather than the one in
BIOS, usually because the latter is incorrect. This patch to force
read discovery file if set discovery=2.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Most Kconfig options to enable a driver are in the Kconfig file
inside the relevant directory, move these two to the same.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The same BO may need different MTYPEs and SNOOP flags in PTEs depending
on its current location relative to the mapping GPU. Setting MTYPEs from
clients ahead of time is not practical for coherent memory sharing.
Instead determine the correct MTYPE for the desired coherence model and
current BO location when updating the page tables.
To maintain backwards compatibility with MTYPE-selection in
AMDGPU_VA_OP_MAP, the coherence-model-based MTYPE selection is only
applied if it chooses an MTYPE other than MTYPE_NC (the default).
Add two AMDGPU_GEM_CREATE_... flags to indicate the coherence model. The
default if no flag is specified is non-coherent (i.e. coarse-grained
coherent at dispatch boundaries).
Update amdgpu_amdkfd_gpuvm.c to use this new method to choose the
correct MTYPE depending on the current memory location.
v2:
* check that bo is not NULL (e.g. PRT mappings)
* Fix missing ~ bitmask in gmc_v11_0.c
v3:
* squash in "drm/amdgpu: Inherit coherence flags on dmabuf import"
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
change guarantees that gfxoff is allowed before moving further in
s2idle sequence to add more reliablity about gfxoff in amdgpu IP's
suspend flow
Signed-off-by: Harsh Jain <harsh.jain@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Abstract RAS I2C EEPROM addresses from chip names, and set their macro
definition names to the address they set, not the chip they attach
to. Since most chips either use I2C EEPROM address 0 or 40000h for the RAS
table start offset, this leaves us with only two macro definitions as
opposed to five, and removes the redundancy of four.
Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
