summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)Author
2024-08-20drm/amd/display: DCN35 set min dispclk to 50MhzNicholas Susanto
[Why] Causes hard hangs when resuming after display off on extended/duplicate modes [How] Set the min dispclk to 50Mhz for DCN35 Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Fix construct_phy with MXM connectorIlya Bakoulin
[Why/How] The call to construct_phy will fail in cases where connector type is MXM, and the dc_link won't be properly created/initialized. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Support UHBR10 link rate on eDPSung Joon Kim
[why] Supporting UHBR10 link rate on eDP leverages the existing DP2.0 code but need to add some small adjustments in code. [how] Acknowledge the given DPCD caps for UHBR10 link rate support and allow DP2.0 programming sequence and link training for eDP. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Hardware cursor changes color when switched to software cursorNevenko Stupar
[Why & How] DCN4 Cursor has separate degamma block and should always do Cursor degamma for Cursor color modes. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Allow UHBR Interop With eDP Supported Link Rates TableMichael Strauss
[WHY] eDP 2.0 is introducing support for UHBR link rates, however current eDP ILR link optimization does not account for UHBR capabilities. Either UHBR capabilities will be provided via the same 128b/132b rate DPCD caps that are currently used on DP2.1, or Table 4-13 may be updated to include UHBR rates. [HOW] Add extra Supported Link Rates table translations for UHBR10/13.5/20. Update eDP link setting optimization search to be aware of 128b/132b DPCD rate caps in order to unblock UHBR on panels with Supported Link Rates table. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Remove redundant check in DCN35 hwseqNicholas Susanto
Removing redundant condition. Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: remove an extraneous call for checking dchub clockAurabindo Pillai
when removing the amdgpu module and reinserting it, a call trace is triggered: [ 334.230602] RIP: 0010:hubbub2_get_dchub_ref_freq+0xbb/0xe0 [amdgpu] [ 334.230807] Code: 25 28 00 00 00 75 3c 48 8d 65 f0 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 45 31 db e9 55 a1 ca de <0f> 0b eb c6 0f 0b eb c2 d1 eb 8d 83 c0 63 ff ff 3d 20 4e 00 00 76 [ 334.230809] RSP: 0018:ffffbc8b823fb540 EFLAGS: 00010246 [ 334.230811] RAX: 0000000000001000 RBX: 00000000000186a0 RCX: 0000000000000000 [ 334.230812] RDX: ffffbc8b823fb544 RSI: 0000000000000000 RDI: 0000000000000000 [ 334.230813] RBP: ffffbc8b823fb560 R08: 0000000000000000 R09: 0000000000000000 [ 334.230814] R10: 0000000000000000 R11: 000000000000000f R12: ffff9e644f1f2bb0 [ 334.230815] R13: ffff9e6451361300 R14: 0000000000000000 R15: ffff9e6452c00000 [ 334.230816] FS: 00007af7c8519000(0000) GS:ffff9e737dd00000(0000) knlGS:0000000000000000 [ 334.230817] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 334.230818] CR2: 0000703576b9cbd0 CR3: 00000001095a2000 CR4: 0000000000750ee0 [ 334.230819] PKRU: 55555554 [ 334.230820] Call Trace: [ 334.230822] <TASK> [ 334.230824] ? show_regs+0x6d/0x80 [ 334.230828] ? __warn+0x89/0x160 [ 334.230832] ? hubbub2_get_dchub_ref_freq+0xbb/0xe0 [amdgpu] [ 334.231024] ? report_bug+0x17e/0x1b0 [ 334.231028] ? handle_bug+0x46/0x90 [ 334.231030] ? exc_invalid_op+0x18/0x80 [ 334.231032] ? asm_exc_invalid_op+0x1b/0x20 [ 334.231036] ? hubbub2_get_dchub_ref_freq+0xbb/0xe0 [amdgpu] [ 334.231217] dc_create_resource_pool+0xfd/0x320 [amdgpu] [ 334.231408] dc_create+0x256/0x700 [amdgpu] [ 334.231588] ? srso_alias_return_thunk+0x5/0x7f [ 334.231590] ? dmi_matches+0xa0/0x230 [ 334.231594] amdgpu_dm_init+0x28c/0x25f0 [amdgpu] [ 334.231791] ? prb_read_valid+0x1c/0x30 [ 334.231795] ? __irq_work_queue_local+0x43/0xf0 [ 334.231798] ? srso_alias_return_thunk+0x5/0x7f [ 334.231800] ? irq_work_queue+0x2f/0x70 [ 334.231802] ? srso_alias_return_thunk+0x5/0x7f [ 334.231803] ? __wake_up_klogd.part.0+0x40/0x70 [ 334.231805] ? srso_alias_return_thunk+0x5/0x7f [ 334.231807] ? vprintk_emit+0xd9/0x210 [ 334.231809] ? set_dev_info+0x130/0x1c0 [ 334.231812] ? srso_alias_return_thunk+0x5/0x7f [ 334.231813] ? dev_printk_emit+0xa1/0xe0 [ 334.231819] dm_hw_init+0x14/0x30 [amdgpu] [ 334.231993] amdgpu_device_init+0x23c7/0x2fc0 [amdgpu] [ 334.232134] ? pci_read_config_word+0x25/0x50 [ 334.232139] amdgpu_driver_load_kms+0x1a/0xd0 [amdgpu] [ 334.232284] amdgpu_pci_probe+0x1f9/0x620 [amdgpu] On DCN401, get_dchub_ref_freq() hook is called before init_hw() hook. Hence, it is expected to trigger an assert. Remove the extraneous call to get_dchub_ref_freq() to suppress the call trace Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20drm/amd/display: Update HPO I/O When Handling Link Retrain Automation RequestMichael Strauss
[WHY] Previous multi-display HPO fix moved where HPO I/O enable/disable is performed. The codepath now taken to enable/disable HPO I/O is not used for compliance test automation, meaning that if a compliance box being driven at a DP1 rate requests retrain at UHBR, HPO I/O will remain off if it was previously off. [HOW] Explicitly update HPO I/O after allocating encoders for test request. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-20Revert "drm/amd/display: Update to using new dccg callbacks"Hansen Dsouza
[Why] Revert updated DCCG wrappers due to regression [How] This reverts commit 680458d41aa46a009909482f58358205b5c4b438. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Adjust cursor positionRodrigo Siqueira
[why & how] When the commit 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror") was introduced, it used the wrong calculation for the position copy for X. This commit uses the correct calculation for that based on the original patch. Fixes: 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8f9b23abbae5ffcd64856facd26a86b67195bc2f) Cc: stable@vger.kernel.org
2024-08-13drm/amd/display: fix cursor offset on rotation 180Melissa Wen
[why & how] Cursor gets clipped off in the middle of the screen with hw rotation 180. Fix a miscalculation of cursor offset when it's placed near the edges in the pipe split case. Cursor bugs with hw rotation were reported on AMD issue tracker: https://gitlab.freedesktop.org/drm/amd/-/issues/2247 The issues on rotation 270 was fixed by: https://lore.kernel.org/amd-gfx/20221118125935.4013669-22-Brian.Chang@amd.com/ that partially addressed the rotation 180 too. So, this patch is the final bits for rotation 180. Reported-by: Xaver Hugl <xaver.hugl@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2247 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Fixes: 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1fd2cf090096af8a25bf85564341cfc21cec659d) Cc: stable@vger.kernel.org
2024-08-13drm/amd/display: Enable otg synchronization logic for DCN321Loan Chen
[Why] Tiled display cannot synchronize properly after S3. The fix for commit 5f0c74915815 ("drm/amd/display: Fix for otg synchronization logic") is not enable in DCN321, which causes the otg is excluded from synchronization. [How] Enable otg synchronization logic in dcn321. Fixes: 5f0c74915815 ("drm/amd/display: Fix for otg synchronization logic") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Loan Chen <lo-an.chen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit d6ed53712f583423db61fbb802606759e023bf7b) Cc: stable@vger.kernel.org
2024-08-13drm/amd/display: Align hwss_wait_for_all_blank_complete descriptor with ↵Srinivasan Shanmugam
implementation The descriptor for `hwss_wait_for_all_blank_complete` was previously misaligned with the actual implementation. This commit refines the descriptor to reflect the implementation of `hwss_wait_for_all_blank_complete` Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_hw_sequencer.c:991: warning: expecting prototype for hwss_wait_for_blank_complete(). Prototype was for hwss_wait_for_all_blank_complete() instead Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Promote DAL to 3.2.296Martin Leung
This version brings along following fixes: - Fix some cursor issue - Fix print format specifiers in DC_LOG_IPS - Fix minor coding errors in dml21 phase 5 - Fix MST BW calculation Regression - Improve FAM control for DCN401 - Add null pointer checks for some code - Refactor 3DLUT for non-DMA - Optimize vstartup position for AS-SDP - Update to using new dccg callbacks - Enable otg synchronization logic for DCN321 - Disable DCN401 UCLK P-State support on full updates Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Remove unnecessary call to REG_SEQ_SUBMIT|WAIT_DONERodrigo Siqueira
[why & how] Remove unnecessary call to REG_SEQ_SUBMIT and REG_SEQ_WAIT_DONE, since those macros are not necessary anymore at the dpp1 set degamma. Those are part of an old implementation. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Adjust cursor positionRodrigo Siqueira
[why & how] When the commit 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror") was introduced, it used the wrong calculation for the position copy for X. This commit uses the correct calculation for that based on the original patch. Fixes: 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: fix cursor offset on rotation 180Melissa Wen
[why & how] Cursor gets clipped off in the middle of the screen with hw rotation 180. Fix a miscalculation of cursor offset when it's placed near the edges in the pipe split case. Cursor bugs with hw rotation were reported on AMD issue tracker: https://gitlab.freedesktop.org/drm/amd/-/issues/2247 The issues on rotation 270 was fixed by: https://lore.kernel.org/amd-gfx/20221118125935.4013669-22-Brian.Chang@amd.com/ that partially addressed the rotation 180 too. So, this patch is the final bits for rotation 180. Reported-by: Xaver Hugl <xaver.hugl@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2247 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Fixes: 9d84c7ef8a87 ("drm/amd/display: Correct cursor position on horizontal mirror") Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Improve FAM control for DCN401Rodrigo Siqueira
[why & how] When the commit 5324e2b205a2 ("drm/amd/display: Add driver support for future FAMS versions") was introduced, it missed some of the FAM2 code. This commit introduces the code that control the FAM enable and disable. Fixes: 5324e2b205a2 ("drm/amd/display: Add driver support for future FAMS versions") Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Remove unused fieldRodrigo Siqueira
[why & how] Remove force_backlight_start_level since it is never used. Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Enable otg synchronization logic for DCN321Loan Chen
[Why] Tiled display cannot synchronize properly after S3. The fix for commit 5f0c74915815 ("drm/amd/display: Fix for otg synchronization logic") is not enable in DCN321, which causes the otg is excluded from synchronization. [How] Enable otg synchronization logic in dcn321. Fixes: 5f0c74915815 ("drm/amd/display: Fix for otg synchronization logic") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Loan Chen <lo-an.chen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: remove redundant msg to pmfw at boot/resumeCharlene Liu
[why & how] this is to remove redundant msg to pmfw at boot/resume since bios already power up dcn. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Set max VTotal cap for dcn401Dillon Varone
[WHY&HOW] Set max VTotal cap for dcn401 because VTotal register is only 16 bits wide on dcn401. Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Perform outstanding programming on full updatesDillon Varone
[WHY] In certain scenarios DC can internally trigger back to back full updates which will miss some required programming that is normally deferred until post update via optimize_bandwidth. [HOW] In back to back update scenarios, wait for pending updates to complete and perform any strictly required outstanding programming. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Disable DCN401 UCLK P-State support on full updatesDillon Varone
[WHY&HOW] It is not guaranteed even for HW exclusive P-State methods (like VActive) that P-state will be supported properly until optimize bandwidth is called, so unconditionally disable it on full updates. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Reduce redundant minimal transitions due to SubVPDillon Varone
[WHY] Stream ID's associated with phantom pipes can change often as they are reconstructed on full updates, however they can remain identical depending on the required update. [HOW] In the case phantom streams and pipe topologies remain the same between updates, mark the transition as seamless. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Optimize vstartup position for AS-SDPRobin Chen
[Why] In current design, the vstartup position is adjusted to vblank start position when AS-SDP is enabled. However when the vblank length is too big, it may over vstartup boundary. [How] To adjust vstartup position to 1 line before vsync position. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Signed-off-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Fix print format specifiers in DC_LOG_IPSRoman Li
[Why] %d specifier is used for printing unsigned values. It can result in negative values in logs for unsigned variables. [How] Replace %d with %u for unsigned. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Check null pointer before try to access itWayne Lin
[why & how] Make sure plane_state is not null before calling a function that dereferences it. Besides, remove redundant codes. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Check null pointer before try to access itRodrigo Siqueira
[why & how] Change the order of the pipe_ctx->plane_state check to ensure that plane_state is not null before accessing it. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: guard otg disable w/a for testMuhammad Ahmed
[why & how] HW removed this w/a, but we will still keep it to avoid regression. but return in test mode. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Add more logging for MALL static screenAurabindo Pillai
[why & how] print additional info for MALL related calculations and DMCUB messaging to aid debugging. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Update to using new dccg callbacksHansen Dsouza
[Why and how] Update to using new dccg callbacks Reviewed-by: Chris Park <chris.park@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Unlock Pipes Based On DET AllocationAustin Zheng
[Why] DML21 does not allocate DET evenly between pipes. May result in underflow when unlocking the pipes as DET could be overallocated. [How] 1. Unlock pipes that have a decreased amount of DET allocation 2. Wait for the double buffer to be updated. 3. Unlock the remaining pipes. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: Check null pointers before using dc->clk_mgrAlex Hung
[WHY & HOW] dc->clk_mgr is null checked previously in the same function, indicating it might be null. Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which dereferences null "dc->clk_mgr". (The function pointer resolves to "dcn35_apply_idle_power_optimizations".) This fixes 1 FORWARD_NULL issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: 3DLUT non-DMA refactorRelja Vojvodic
[Why] Currently the handling for 3DLUT is found in multiple different places, which causes issues when the different functions are not in sync with each other. Frequently bugs occur because the LUT handling is broken up, and what has already been handled isn't kept track of well, which can cause earlier changes to the LUT params to be overridden. [How] Remove DMA LUT handling from DCN401 and refactor legacy LUT handling in one place to make it easier to keep track of what has and needs to be done. Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: apply vmin optimization even if it doesn't reach vmin levelWenjing Liu
[why] Based on power measurement result, in most cases when display clock is higher than Vmin display clock, lowering display clock using dynamic ODM will improve overall power consumption by 0 to 4 watts even if we can't reach Vmin. [how] Allow vmin optimization applied even if dispclk can't reach Vmin. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: fix minor coding errors where dml21 phase 5 uses wrong ↵Wenjing Liu
variables [why & how] There is a coding error which causes incorrect variables to be assigned in DML21 phase 5. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-13drm/amd/display: remove extraneous ; after statementsColin Ian King
There are a several statements with two following semicolons, replace these with just one semicolon. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-09Merge tag 'amd-drm-fixes-6.11-2024-08-08' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.11-2024-08-08: amdgpu: - DMCUB fix - Fix DET programming on some DCNs - DCC fixes - DCN 4.0.1 fixes - SMU 14.0.x update - MMHUB fix - DCN 3.1.4 fix - GC 12.0 fixes - Fix soft recovery error propogation - SDMA 7.0 fixes - DSC fix drm buddy: - Add start address to trim function Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240808161134.1227671-1-alexander.deucher@amd.com
2024-08-07drm/amd/display: Add missing program DET segment call to pipe initRodrigo Siqueira
Add a callback that program the DET segment when initializing pipes. Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e1dbe625d6ac2821eb29e087db46cb539d8079f0)
2024-08-07drm/amd/display: Add missing DCN314 to the DML MakefileRodrigo Siqueira
Include display_mode_vba_314 and display_rq_dlg_calc_314 to the dml Makefile. Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 089525632d40bbfa507f224c20563529b3f8a4b3)
2024-08-07drm/amd/display: Add missing mcache registersRodrigo Siqueira
Add missing register programming for mcache in DCN401. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a00a177055cced5cd2bb057a1ace9a95a286bc49)
2024-08-07drm/amd/display: Add dcc propagation valueRodrigo Siqueira
Initialize the field dcc_meta_propagation_delay_us with 10 ms. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 74bad61c5d83f5af8a855c8b7dc8e20377c74d46)
2024-08-07drm/amd/display: Add missing DET segments programmingRodrigo Siqueira
The commit 5034b935f62a ("drm/amd/display: Modify DHCUB waterwark structures and functions") introduced a code refactor for DCHUB, but during the merge process into amd-staging-drm-next, the program det segments were removed. This commit adds the DET segment programming for DCN35. Fixes: 5034b935f62a ("drm/amd/display: Modify DHCUB waterwark structures and functions") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 675d9ac9d0de765531e94f9fdc536989a997a324)
2024-08-07drm/amd/display: Replace dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmdRodrigo Siqueira
In the commit c2cec7a872b6 ("drm/amd/display: Wake DMCUB before sending a command for replay feature"), replaced dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd in multiple areas, but due to merge issues the replacement of this function in the dmub_replay_copy_settings was missed. This commit replaces the old dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd. Fixes: 3601a35a2e9d ("drm/amd/display: Wake DMCUB before sending a command for replay feature") Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 6cc213b9aa34bc3213e20f9256345c5cc1495b0b)
2024-08-06drm/amd/display: 3.2.295Aric Cyr
This version brings along following fixes: - Clean up some files style problems - Program the DET segment when initializing pipes in dcn10_hwseq - Fix overlay with pre-blend color processing - Disable SubVP if Hardware Rotation is Used - Fix few things in DML - Re-enable panel replay feature - Fix null pointer dereference under mst+dsc setup Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Add DML2.1 option to disable DRR clamped P-State StrategiesDillon Varone
[WHY & HOW] When DRR is active with variable refresh rate, add the ability to block DRR clamped P-State strategies (such as SubVP). Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Revert Avoid overflow assignmentGabe Teeger
This reverts commit a15268787b79 ("drm/amd/display: Avoid overflow assignment in link_dp_cts") Due to regression causing DPMS hang. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Gabe Teeger <Gabe.Teeger@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Add clock control callbacksHansen Dsouza
[why & how] Add clock source selection control functions based on spec Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-08-06drm/amd/display: Address coverity changeChris Park
[Why] Coverity picks up a defect with regards to array underflow. [How] Address coverity issue as recommended. Reviewed-by: Leo Ma <hanghong.ma@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-19 15:02:28 +0000