summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dmub/dmub_srv.h
AgeCommit message (Collapse)Author
2021-11-03drm/amd/display: Added new DMUB boot option for power optimizationJake Wang
[Why] During Z10, root clock gating and memory low power registers needs to to be restored if optimization is enabled in driver. [How] Added new DMUB boot option for root clock gating and memory low power. Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Enable dpia in dmub only for DCN31 B0Jude Shih
[Why] DMUB binary is common for both A0 and B0. Hence, driver should notify FW about the support for DPIA in B0. [How] Added dpia_supported bit in dmub_fw_boot_options and will be set only for B0. Assign dpia_supported to true before dm_dmub_hw_init in B0 case. v2: fix build without CONFIG_DRM_AMD_DC_DCN (Alex) Signed-off-by: Jude Shih <shenshih@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: Set phy_mux_sel bit in dmub scratch registerHansen
[Why] B0 has pipe mux for DIGC and DIGD which can be connected to PHYF/PHYG or PHYC/PHY D. [How] Based on chip internal hardware revision id determine it is B0 and set DMUB scratch register so DMUBFW can connect the display pipe is connected correctly to the dig. Cc: Wayne Lin <wayne.lin@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Hansen <Hansen.Dsouza@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Add dpia debug optionsMeenakshikumar Somasundaram
[Why & How] To add support for dpia debug options. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-06drm/amd/display: Support for SET_CONFIG processing with DMUBMeenakshikumar Somasundaram
[Why] To process SET_CONFIG transactions with DMUB using inbox1 and outbox1 mail boxes. [How] 1) Added inbox1 DPIA command subtype DMUB_CMD__DPIA_SET_CONFIG_ACCESS to issue SET_CONFIG command to DMUB in dc_process_dmub_set_config_async(). DMUB processes the command with DPIA sends reply back immediately or in an outbox1 message triggering an outbox1 interrupt to driver. 2) DMUB posts SET_CONFIG reply as an Outbox1 message of type DMUB_OUT_CMD__SET_CONFIG_REPLY. 3) The dmub async to sync mechanism for AUX is modified to accommodate SET_CONFIG commands for both command issue and reply code paths. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-04drm/amd/display: Prevent using DMUB rptr that is out-of-boundsWyatt Wood
[Why] Running into bugchecks during stress test where rptr is 0xFFFFFFFF. Typically this is caused by a hard hang, and can come from HW outside of DCN. [How] To prevent bugchecks when writing the DMUB rptr, fist check that the rptr is valid. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Add periodic detection when zstate is enabledEric Yang
[Why] When system is in Z10 HPD interrupts cannot fire, we may miss display configuration changes. [How] When Zstate is enabled, if DMUB indicate DCN has lost power, do a complete detection periodically. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-08drm/amd/display: DMUB Outbound Interrupt Process-X86Chun-Liang Chang
[Why] dmub would notify x86 response time violation by GPINT_DATAOUT [How] 1. Use GPINT_DATAOUT to trigger x86 interrupt 2. Register GPINT_DATAOUT interrupt handler. 3. Trigger ACR while GPINT_DATAOUT occurred. Signed-off-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-22drm/amdgpu/display: fold DRM_AMD_DC_DCN3_1 into DRM_AMD_DC_DCNAlex Deucher
No need for a separate flag now that DCN3.1 is not in bring up. Fold into DRM_AMD_DC_DCN like previous DCN IPs. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-15drm/amd/display: add DMUB registers to crash dump diagnostic data.Ashley Thomas
[WHY] Ability to triage DMCUB is improved with availability of certain dmub registers not currently captured in crash dump diagnostic data. [HOW] Add dmub registers to diagnostic data collection. Thanks Nicholas Kazlauskas for awesome input on this! Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-04drm/amd/display: Add DCN3.1 DMCUBNicholas Kazlauskas
DMCU-B (Display Micro-Controller Unit B) is a display microcontroller used for shared display functionality with BIOS and for advanced power saving display features. Extends the command header to include new DCN3.1 functionality. Adds new interfaces to DC dmub interface as well for z-state support. Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27drm/amd/display: Implement INBOX0 usage in driverAlvin Lee
[Why] Start using INBOX0 for HW Lock command [How] - Implement initial interface for INBOX0 HW lock message Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amd/display: Initial DC support for Beige GobyAurabindo Pillai
[Why&How] Add Beige Goby (DCN303) resource, irq service, & dmub loader. v2: fix nbio include (Alex) Signed-off-by: Chris Park <Chris.Park@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amd/display: Add get_current_time interface to dmub_srvWyatt Wood
[Why] Need to get current DMUB time. [How] Add get_current_time interface to dmub_srv. v2: drop whitespace changes (Alex) Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-10drm/amd/display: Extend DMUB HW params to allow DM to specify boot optionsEric Yang
[Why & How] Add the field to HW params to allow DM dynamically pass down debug and boot options as needed. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: Fixed read/write pointer issue for get dmub traceYongqiang Sun
[Why] Driver get wrap around dmub trace data due to read pointer being increased incorrectly when there are multiple interrupt queues with very short interval [How] Check read/write pointer before copying data from ring buffer Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-02drm/amd/display: Implement dmub trace eventYongqiang Sun
[Why & How] DMUB FW send trace event via outbox0 interrupt. Driver will handle it. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-02drm/amd/display: Support for DMUB AUXMeenakshikumar Somasundaram
[WHY] To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes. [HOW] 1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd with DCN and sends reply back in an outbox1 message triggering an outbox1 interrupt to driver. 2) In existing driver implementation, AUX commands are processed synchronously by configuring DCN reg. But in DMUB AUX, driver sends an inbox1 message and waits for a conditional variable (CV) which will be signaled by outbox1 ISR. 3) As the driver holds dal and dc locks while waiting for CV, the outbox1 ISR is registered with noMutexWait set to true, which allows ISR to run and signal CV. This sets a constraint on ISR to not modify variables such as dc, dmub, etc. 4) Created dmub_outbox.c with dmub_enable_outbox_notification() to enable outbox1 mailbox. 5) New mailbox address ranges allocated for outbox1 of size DMUB_RB_SIZE. Created dmub functions for Outbox1: dmub_dcn20_setup_out_mailbox(), dmub_dcn20_get_outbox1_wptr() and dmub_dcn20_set_outbox1_rptr(). 6) Added functions dc_stat_get_dmub_notification() and dmub_srv_stat_get_notification() to retrieve Outbox1 message. 7) Currently, DMUB doesn't opens DDC in AUX mode before issuing AUX transaction. A workaround is added in dce_aux_transfer_dmub_raw() to open in DDC in AUX mode for every AUX transaction. 8) Added dc debug option enable_dmub_aux_for_legacy_ddc enable/disable DMUB AUX. This debug option is checked dce_aux_transfer_with_retries() to select the method to process AUX transactions. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-08drm/amd/display: Add support for runtime feature detection commandWyatt Wood
[Why] Add support for new fw command for runtime feature detection. [How] Driver sends command through ring buffer, and fw returns data back through this command. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-16drm/amd/display: Update dmub codeBhawanpreet Lakha
There is a delta in the dmub code - add boot options - add boot status - remove unused auto_load_is_done func pointer Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-04drm/amdgpu: fold CONFIG_DRM_AMD_DC_DCN3* into CONFIG_DRM_AMD_DC_DCN (v3)Alex Deucher
Avoids confusion in configurations. v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled v3: rebase on latest code Reviewed-by: Luben Tuikov <luben.tuikov@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-12drm/amd/display: Add support for DCN302 (v2)Bhawanpreet Lakha
- add DCN302 resource, irq service, dmub loader, - handle DC_VERSION_DCN_3_02 - define DCN302 power gating functions - handle DCN302 in GPIO files - define I2C regs - add CONFIG_DRM_AMD_DC_DCN3_02 guard v2: rebase fixes (Alex) Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-05drm/amd/display: Add dcn3.01 support to DC (v2)Roman Li
Update dc for vangogh support. v2: fix compilation without DCN 301 set. Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10Revert "drm/amd/display: add mechanism to skip DCN init"Changfeng
To avoid s3 faild at the first cycle on renoir platform, it needs to revert this patch: drm/amd/display: add mechanism to skip DCN init Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Ackedy-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: add mechanism to skip DCN initEric Yang
[Why] If optimized init is done in FW. DCN init be skipped in driver. This need to be communicated between driver and fw and maintain backwards compatibility. [How] Use DMUB scratch 0 bit 2 to indicate optimized init done in fw and use DMUB scatch 4 bit 0 to indicate drive supports the optimized flow so FW will perform it. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: runtime select dmub emulatior.Yongqiang Sun
[Why & How] Add emul specific hw function to dmub, in case of emulator is created, we can runtime switch between dmub emulator or dmub uC via is_virtual flag in dmub. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-01drm/amd/display: Add DCN3 DMUBBhawanpreet Lakha
DMUB (Display Micro-Controller Unit) Used to read/write regs Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-28drm/amd/display: combine public interfaces into single headerAnthony Koo
[Why] We want to better encapsulate all driver-fw dependencies into a single file. [How] Combine all the headers under inc folder into a single header Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-28drm/amd/display: Add DMUB firmware version helpers in DMUB serviceNicholas Kazlauskas
[Why] In order to switch over the inbox from region4 to cw4 we need to know if the firmware is capable of properly invalidating the cache before reading the commands. Easiest way is to just check the firmware version, but we don't have the helper macros or a way for the dmub_srv to know what version it is. [How] Add a new fw_version field to the creation parameters that driver can optional pass in. Assumes a version of 0x00000000 is invalid. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-05drm/amd/display: move location of dmub_srv.h fileAnthony Koo
[Why] Make a separation of what belongs in the differen dmub headers dmub_srv.h is for exposing dmub srv interface to rest of driver. other headers inside dmub/inc exposes cmds and definitions that are owned by the firmware [How] keep firmware owned definitions in dmub/inc move stuff that is purely driver interface headers to dmub/ since those are interface calls that are defined for rest of driver to use Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-09-08 22:54:31 +0000