summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/modules
AgeCommit message (Collapse)Author
2020-02-25drm/amd/display: Fix HDMI repeater authenticationBhawanpreet Lakha
when the rxstatus split was done the index was incorrect. This lead to HDMI repeater authentication failure for HDCP2.X So fix it Fixes: 302169003733 ("drm/amd/display: split rxstatus for hdmi and dp") Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: Only round InfoFrame refresh ratesAric Cyr
[Why] When calculating nominal refresh rates, don't round. Only the VSIF needs to be rounded. [How] Revert rounding change for nominal and just round when forming the FreeSync VSIF. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/amd/display: System crashes when add_ptb_to_table() gets calledPeikang Zhang
[Why] Unused VMIDs were not evicted correctly [How] 1. evict_vmids() logic was fixed; 2. Added boundary check for add_ptb_to_table() and clear_entry_from_vmid_table() to avoid crash caused by array out of boundary; 3. For mod_vmid_get_for_ptb(), vimd is changed from unsigned to signed due to vimd is signed. Signed-off-by: Peikang Zhang <peikang.zhang@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-12drm/amd/display: Fix message for encryptionBhawanpreet Lakha
-msg_in is not needed for enabling encryption. -Use hdcp2_set_encryption instead of hdcp1_enable_encryption for hdcp2.2 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-12drm/amd/display: fix backwards byte order in rx_caps.Bhawanpreet Lakha
We were using incorrect byte order after we started using the drm_defines So fix it. Fixes: 02837a91ae75 ("drm/amd/display: add and use defines from drm_hdcp.h") Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-12drm/amd/display: update HDCP DTM immediately after hardware programmingWenjing Liu
[why] HDCP DTM needs to be aware of the upto date display topology information in order to validate hardware consistency. [how] update HDCP DTM on update_stream_config call. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-12drm/amd/display: no hdcp retry if bksv or ksv list is revokedWenjing Liu
[why] According to the specs when bksv or ksv list fails SRM check, HDCP TX should abort hdcp immediately. However with the current code HDCP will be reattampt upto 4 times. [how] Add the logic that stop HDCP retry if bksv or ksv list is revoked. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-12drm/amd/display: Handle revoked receiversBhawanpreet Lakha
[Why] PSP added a new return code for revoked receivers (SRM). We need to handle that so we don't retry hdcp This is already being handled on windows [How] Add the enums to psp interface header and handle them. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-04drm/amd/display: update psp interface headerBhawanpreet Lakha
[Why] We need to support SRM(System Renewability Message) As per hdcp spec (5.Renewability) SRM needs to be storage in a non-volatile memory. PSP owns the checking of SRM but doesn't have the ability to store it in a non-volatile memory. So we need the kernel driver to facilitate it using the interface provided by PSP [How] Add the interface to the header file, so the driver can use them v2: update commit description Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-30drm/amd/display: fix spelling mistake link_integiry_check -> ↵Colin Ian King
link_integrity_check There is a spelling mistake on the struct field name link_integiry_check, fix this by renaming it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Refactor to remove diags specific rgam funcAnthony Koo
[Why] It has duplicate code for building regamma curve [How] Remove the duplicate code and use the same function for building regamma Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-22drm/amd/display: Fixed comment stylingHaiyi Zhou
Switched to C-style comments for consistency Signed-off-by: Haiyi Zhou <haiyi.zhou@amd.com> Reviewed-by: Reza Amini <Reza.Amini@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: implement fw-driver interface for abm 2.4Josip Pavic
[Why] IRAM definition needed for versions of DMCU containing ABM 2.4 [How] Pass ABM 2.3 IRAM definition, which is compatible with ABM 2.4, to DMCU when ABM 2.4 FW is detected Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Fix 300Hz Freesync bugAlvin Lee
Needed to reprogram vblank_start in dml properly in order to get the correct dlg params to program VTG. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-16drm/amd/display: Clear state after exiting fixed active VRR stateAmanda Liu
[why] Upon exiting a fixed active VRR state, the state isn't cleared. This leads to the variable VRR range to be calculated incorrectly. [how] Set fixed active state to false when updating vrr params Signed-off-by: Amanda Liu <amanda.liu@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-13Merge tag 'amd-drm-next-5.6-2020-01-09' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-next-5.6-2020-01-09: amdgpu: - Enable DCN support on POWER - Enable GFXOFF for Raven1 refresh - Clean up MM engine idle handlers - HDMI 2.0 audio fixes - Fixes for some 10 bpc EDP panels - Watermark fixes for renoir - SR-IOV fixes - Runtime pm robustness fixes - Arcturus VCN fixes - RAS fixes - BACO fixes for Arcturus - Stable pstate fixes for swSMU - HDCP fixes - PSP cleanup - HDMI fixes - Misc cleanups amdkfd: - Spread interrupt work across cores to reduce latency - Topology fixes for APUs - GPU reset improvements UAPI: - Enable DRIVER_SYNCOBJ_TIMELINE for vulkan - Return better error values for kfd process ioctl Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200109230338.8022-1-alexander.deucher@amd.com
2020-01-07drm/amd/display: add event type check before restart the authenticationXiaodong Yan
[Why] Some combined docks will always trigger CP_IRQ but there's nothing the driver needs to take care of, but the CP_IRQ breaks the original hdcp state and triggers the driver to restart the authentication. [How] Add the event type check before restart the authentication or resend the stream management Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Add delay after h' watchdog timeout eventMichael Strauss
[WHY] Some monitors trigger HDCP2.x timeout after reinitializing (e.g. toggling HDR) by taking longer than expected to return h' (h prime) Previously the 200ms watchdog timer retry count would hit MAX_NUM_OF_ATTEMPTS (4), causing fallback to HDCP1.x [HOW] Adding a 1s delay after an h' watchdog timeout provides enough time for affected monitors to return h' in time without hitting MAX_NUM_OF_ATTEMPTS Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: rx_validation failed resume from sleepJing Zhou
[why] Most DP/HDMI monitors need more time to response rx_validation request. [how] Add generic 1000ms delay. Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Return correct Error code for validate h_primeBhawanpreet Lakha
[Why] We are returning incorrect error code for validate h prime [How] Return the right Error code Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: Fix hdcp1 create sessionBhawanpreet Lakha
[Why] PSP needs session ID to destroy a session, In the case where we fail create session we don't have a session ID [How] Set the session ID before returning Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07drm/amd/display: fix psp return condition for hdcp moduleBhawanpreet Lakha
We are returning SUCCESS when hdcp_status != Success. Fix it. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu/display: use msleep rather than udelay for HDCPAlex Deucher
ARM has a 2000us limit for udelay. Switch to msleep. This code executes in a worker thread so shouldn't be an atomic context. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191217204707.2258744-2-alexander.deucher@amd.com
2019-12-19drm/amdgpu/display: include delay.hAlex Deucher
For udelay. This is needed for some platforms. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazluaskas@amd.om> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191217204707.2258744-1-alexander.deucher@amd.com
2019-12-18drm/amdgpu/display: include delay.hAlex Deucher
For udelay. This is needed for some platforms. Reviewed-by: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: fix regamma build optimizationJosip Pavic
[Why] When the global variable pow_buffer_ptr is set to -1, by definition optimizations should not be used to build the regamma. Since translate_from_linear_space unconditionally increments this global, it inadvertently enables the optimization. [How] Increment pow_buffer_ptr only if it is not -1. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/amd/display: Reinstate LFC optimizationAmanda Liu
[why] We want to streamline the calculations made when entering LFC. Previously, the optimizations led to screen tearing and were backed out to unblock development. [how] Integrate other calculations parameters, as well as screen tearing, fixes with the original LFC calculation optimizations. Signed-off-by: Amanda Liu <amanda.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-05drm/amd/display: Fix screen tearing on vrr testsAmanda Liu
[Why] Screen tearing is present in tests when setting the frame rate to certain fps [How] Revert previous optimizations for low frame rates. Signed-off-by: Amanda Liu <amanda.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-05drm/amd/display: Implement DePQ for DCN1Reza Amini
[Why] Need support for more color management in 10bit surface. [How] Provide support for DePQ for 10bit surface Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amd/display: remove redundant assignment to variable v_totalColin Ian King
The variable v_total is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amd/display: Remove unneeded semicolon in hdcp.czhengbin
Fixes coccicheck warning: drivers/gpu/drm/amd/display/modules/hdcp/hdcp.c:506:2-3: Unneeded semicolon Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-02drm/amd/display: fix double assignment to msg_id fieldColin Ian King
The msg_id field is being assigned twice. Fix this by replacing the second assignment with an assignment to msg_size. Addresses-Coverity: ("Unused value") Fixes: 11a00965d261 ("drm/amd/display: Add PSP block to verify HDCP2.2 steps") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-26drm/amd/display: remove set but not used variable 'msg_out'YueHaibing
drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_psp.c: In function mod_hdcp_hdcp2_enable_encryption: drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_psp.c:633:77: warning: variable msg_out set but not used [-Wunused-but-set-variable] drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_psp.c: In function mod_hdcp_hdcp2_enable_dp_stream_encryption: drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_psp.c:710:77: warning: variable msg_out set but not used [-Wunused-but-set-variable] It is never used, so remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Fix static analysis bug in validate_bksvBhawanpreet Lakha
[Why] static analysis throws the error below Out-of-bounds read (OVERRUN) Overrunning array of 5 bytes at byte offset 7 by dereferencing pointer (uint64_t *)hdcp->auth.msg.hdcp1.bksv. var n is going to contain r0p and bcaps. if they are non-zero the count will be wrong How] Use memcpy instead to avoid this. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: split rxstatus for hdmi and dpBhawanpreet Lakha
[Why] Currently we share rxstatus between HDMI and DP, so we use 16bits The drm defines work with 1bytes at a time. So we need to split the HDMI rxstatus into 2bytes before we can use drm defines [How] -create rxstatus for dp and hdmi. rxstatus for hdmi is split into bytes using arrays. -use drm_hdcp defines for the remaining structs Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: use drm defines for MAX CASCADE MASKBhawanpreet Lakha
[Why] drm already has this define [How] drm Mask is 0x08 vs 0x0800. The reason is because drm mask works on a byte. ^^ =======|| || Since the first byte is always zero we can ignore it and only check the second byte. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: add and use defines from drm_hdcp.hBhawanpreet Lakha
[Why] These defines/macros exist already no need to redefine them [How] Use the defines/macros from drm_hdcp.h -we share the rxstatus between HDMI and DP (2 bytes), But upstream defines/macros for HDMI are for 1 byte. So we need to create a separate rxstatus for HDMI Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Refactor HDCP encryption status updateBhawanpreet Lakha
[Why] The old way was to poll PSP and update the properties. But due to a limitation in the PSP interface this doesn't work for MST. [How] According to PSP if set_encryption return success, the link is encrypted and the only way it will not be is if we get a link loss(which we handle already). So this method should be good enough to report HDCP status. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: add force Type0/1 flagBhawanpreet Lakha
[Why] Before we had a disable_type1 flag, this forced HDCP 2.2 to type0 There was no way to force type1. [How] Remove disable_type1 flag and instead add a flag to force type0/1. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Handle hdcp2.2 type0/1 in dmBhawanpreet Lakha
[Why] HDCP 2.2 uses type0 and type1 content type. This is passed to the receiver to stream the proper content. For example, in a MST case if the main device is HDCP2.2 capable but the secondary device is only 1.4 capabale we can use Type0 Type0 content: use HDCP 1.4 or HDCP2.2 type0 Type1 content: Only use HDCP 2.2 type1 [How] We use the "hdcp content type" property in drm. We use the disable_type1 flag in hdcp module to select the type based on the properties. For updating the property we use the same logic as 1.4, but now we consider content_type as well and update the property if the requirements are met Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Enable HDCP 2.2Bhawanpreet Lakha
[Why] HDCP 2.2 was disabled, we need to enable it [How] -Update display topology to support 2.2 -Unset hdcp2.disable in update_config -Change logic of event_update_property, now we set the property to be ENABLED for any level of encryption (2.2 or 1.4). Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Change ERROR to WARN for HDCP moduleBhawanpreet Lakha
[Why] HDCP is a bit finicky so we try it 3 times, this leads to a case where if we fail the first time and pass the second time the error is still shown in dmesg for the first failed attempt. This leads to false positive errors. [How] Change the logging from ERROR to WARNING. Warnings are still shown in dmesg to know what went wrong. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Add logging for HDCP2.2Bhawanpreet Lakha
[Why] We need to log the state changes for 2.2 This patch extends the existing logging functions to handle HDCP2.2. [How] We do this by adding if/else in the defines, and output the log based on the hdcp version Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Add execution and transition states for HDCP2.2Bhawanpreet Lakha
The module works like a state machine +-------------+ ------> | Execution.c | ------ | +-------------+ | | V +----+ +--------+ +--------------+ | DM | -----> | Hdcp.c | <------------ | Transition.c | +----+ <----- +--------+ +--------------+ This patch adds the execution and transition files for 2.2 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Add DDC handles for HDCP2.2Bhawanpreet Lakha
[Why] We need these to read and write to aux/i2c, during authentication [How] Create read/write functions for all the steps (Eg, h_prime, paring_info etc) Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: Add PSP block to verify HDCP2.2 stepsBhawanpreet Lakha
[Why] All the HDCP transactions should be verified using PSP [How] This patch adds the psp calls we need to verify the steps Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-19drm/amd/display: remove set but not used variable 'min_content'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/amd/display/modules/color/color_gamma.c: In function build_freesync_hdr: drivers/gpu/drm/amd/display/modules/color/color_gamma.c:830:20: warning: variable min_content set but not used [-Wunused-but-set-variable] It is not used since commit 50575eb5b339 ("drm/amd/display: Only use EETF when maxCL > max display") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTEDBhawanpreet Lakha
[Why] DCN2 and DSC are stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup NV defninitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN2 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * dce/dce_dmcu.c: dcn20_*lock_phy() * dce/dce_dmcu.c: dcn20_funcs * dce/dce_dmcu.c: dcn20_dmcu_create() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-11-13drm/amd/display: set MSA MISC1 bit 6 while sending colorimetry in VSC SDPAnthony Koo
[Why] It is confusing to sinks if we send VSC SDP only on some format. Today we signal colorimetry format using MSA while in formats like sRGB. But when we switch to BT2020 we set the bit to ignore MSA colorimetry and instead use the colorimetry information in the VSC SDP. But if sink supports signaling of colorimetry via VSC SDP we should always set the MSA MISC1 bit 6, instead of doing so selectively. [How] If sink supports signaling of colorimetry via VSC SDP, and we are sending the colorimetry info via VSC SDP with packet revision 05h, then always set MSA MISC1 bit 6. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-10-25drm/amd/display: Only use EETF when maxCL > max displayKrunoslav Kovac
[Why&How] BT.2390 EETF is used for tone mapping/range reduction. Say display is 0.1 - 500 nits. The problematic case is when content is 0-400. We apply EETF because 0<0.1 so we need to reduce the range by 0.1. In the commit, we ignore the bottom range. Most displays map 0 to min and then have a ramp to 0.1, so sending 0.1 is actually >0.1. Furthermode, HW that uses 3D LUT also assumes min=0. Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-19 18:52:58 +0000