| Age | Commit message (Collapse) | Author |
|---|
|
without PSR
The check for sending the vsc infopacket to the display was gated behind
PSR (Panel Self Refresh) being enabled.
The vsc infopacket also contains the colorimetry (specifically the
container color gamut) information for the stream on modern DP.
PSR is typically only supported on mobile phone eDP displays, thus this
was not getting sent for typical desktop monitors or TV screens.
This functionality is needed for proper HDR10 functionality on DP as it
wants BT2020 RGB/YCbCr for the container color space.
Cc: stable@vger.kernel.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Fixes: 15f9dfd545a1 ("drm/amd/display: Register Colorspace property for DP and HDMI")
Tested-by: Simon Berz <simon@berz.me>
Tested-by: Xaver Hugl <xaver.hugl@kde.org>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This was included in gpu_info firmware, move it into the
driver for consistency with other nv1x parts.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
link_rate sometime will be changed when DP MST connector hotplug, so
pbn_div also need be updated; otherwise, it will mismatch with
link_rate, causes no output in external monitor.
This is a backport to 6.7 and older.
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Wade Wang <wade.wang@hp.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Driver incorrectly checks if pointer variable OutBpp is null instead of
if the value being pointed to is zero.
[How]
Dereference OutBpp before checking for a value of zero.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
we have two SSC_En:
we get ssc_info from dce_info for MPLL_SSC_EN.
we used to call VBIOS cmdtbl's smu_info's SS persentage for DPRECLK SS info,
is used for DP AUDIO and VBIOS' smu_info table was from systemIntegrationInfoTable.
since dcn35 VBIOS removed smu_info, driver need to use integrationInfotable directly.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & how]
Refactor dc_is_dmub_outbox_supported() a bit and add case for dcn35 to
register dmub outbox notification irq to handle usb4 relevant hpd event.
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There have recently been changes that break backwards compatibility,
that were introduced into DMUB firmware (for DCN32x) concerning FPO and
SubVP. So, since those are just power optimization features, we can just
disable them unless the user is using a new enough version of DMUB
firmware.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2870
Fixes: ed6e2782e974 ("drm/amd/display: For cursor P-State allow for SubVP")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/r/CABXGCsNRb0QbF2pKLJMDhVOKxyGD6-E+8p-4QO6FOWa6zp22_A@mail.gmail.com/
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
table 3.0"
[Description]
Revert commit fec05adc40c2 ("drm/amd/display: Use channel_width = 2 for vram table 3.0")
Because the issue is being fixed from VBIOS side.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When screen brightness is rapidly changed and PSR-SU is enabled the
display hangs on panels with this TCON even on the latest DCN 3.1.4
microcode (0x8002a81 at this time).
This was disabled previously as commit 072030b17830 ("drm/amd: Disable
PSR-SU on Parade 0803 TCON") but reverted as commit 1e66a17ce546 ("Revert
"drm/amd: Disable PSR-SU on Parade 0803 TCON"") in favor of testing for
a new enough microcode (commit cd2e31a9ab93 ("drm/amd/display: Set minimum
requirement for using PSR-SU on Phoenix")).
As hangs are still happening specifically with this TCON, disable PSR-SU
again for it until it can be root caused.
Cc: stable@vger.kernel.org
Cc: aaron.ma@canonical.com
Cc: binli@gnome.org
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2046131
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dtbclk is unavaliable from pmfw. Try to grab the value from bounding box
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
HostVMMinPageSize is expected to be in KB according to spec,
the checks later down the line reflect this as well.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Mark reports that brightness is not restored after Xorg dpms screen blank.
This behavior was introduced by commit d9e865826c20 ("drm/amd/display:
Simplify brightness initialization") which dropped the cached backlight
value in display code, but also removed code for when the default value
read back was less than 1 nit.
Restore this code so that the backlight brightness is restored to the
correct default value in this circumstance.
Reported-by: Mark Herbert <mark.herbert42@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3031
Cc: stable@vger.kernel.org
Cc: Camille Cho <camille.cho@amd.com>
Cc: Krunoslav Kovac <krunoslav.kovac@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: d9e865826c20 ("drm/amd/display: Simplify brightness initialization")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We currently don't support dirty rectangles on hardware rotated modes.
So, if a user is using hardware rotated modes with PSR-SU enabled,
use PSR-SU FFU for all rotated planes (including cursor planes).
Cc: stable@vger.kernel.org
Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2952
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Bin Li <binli@gnome.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Does the same thing as:
commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302107.hUDXVyWT-lkp@intel.com/
Fixes: 67e38874b85b ("drm/amd/display: Increase num voltage states to 40")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Samson Tam <samson.tam@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
|
|
[Why]
UBSAN errors observed in dmesg.
array-index-out-of-bounds in dml2/display_mode_core.c
[How]
Fix the index.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some eDP panels's ext caps don't write initial value cause the value of
dpcd_addr(0x317) is random. It means that sometimes the eDP will
clarify it is OLED, miniLED...etc cause the backlight control interface
is incorrect.
[HOW]
Add a new panel patch to remove sink ext caps(HDR,OLED...etc)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VBIOS has suggested to use channel_width=2 for any ASIC that uses vram
info 3.0. This is because channel_width in the vram table no longer
represents the memory width
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
A number of DML parameters related to HostVM were either missing or
being set incorrectly, which may cause inaccuracies in calculating
margins and determining BW limitations.
[How]
Correct these values where needed and populate the missing values.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DTBCLK is enabled on idle and it will burn power.
[How]
There's a few issues here:
- Always enabling DTBCLK on clock manager init
- Setting refclk when DTBCLK is supposed to be disabled
- Not applying the correct calculated version refclk, but instead the
base value which might be zero
On dtbclk_en change we'll message PMFW to enable or disable the clock
accordingly.
The DTBDTO will be then based on refclk, but it will be set to the
default fixed value if there was nothing calculated in DML despite the
clock being considered enabled.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY/HOW]
Increase the pstate latency to improve ac/dc transition
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On recent versions of DMUB firmware, if we want to completely disable
ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM
level to DMUB. Otherwise, LCD eDP displays are unable to reach their
maximum brightness levels. So, to fix this whenever the user requests an
ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also,
to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE
to 0 when a user tries to read the requested ABM level.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
We have dynamic power control in driver but
should be ignored when power is forced on.
[how]
Bypass any power control when it's forced on.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There are a number of instances where we convert HostVMMinPageSize or
GPUVMMinPageSize from bytes to KB by dividing (rather than multiplying) and
vice versa.
Additionally, in some cases, a parameter is passed through DML in KB but
later checked as if it were in bytes.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Prevent overwrite of dc->config.use_default_clock_table, as it should be
pre-configured.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The new table doesn't have an implicit mapping between Fclk SOC voltage
and MemClk and it currently builds the table off of number of Fclk
states rather than DcfClock states.
The DML table in use is not correct for functionality or power and
does not align with our existing policies for DCN3x.
[How]
Build the table based on DcfClock with the following assumptions:
1. Raising Soc voltage is the most expensive operation, so assume that
running at max DispClock or DppClock is preferable.
2. Assume that we can run at max Fclk / MemClk at any state, but
restrict the maximum state to the very last entry in the table as the
worst case scenario.
3. Assume that Fclk always has a 2x multiplier on DcfClock unless the
table specifies something lower.
Reviewed-by: Taimur Hassan <syed.hassan@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Handover from DMUB to driver does not perform link rate toggle.
It might cause link training failure for boot up.
[HOW]
Force toggle rate wa for first link train.
link->vendor_specific_lttpr_link_rate_wa should be zero then.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some panels with residency period of 2054 exhibit flickering with
Z8 at the end of the frame.
[How]
As a workaround, increase the limit to block these panels.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Flickering occurs on DRR supported panels when engaged in DRR due to
min_dst_y_next becoming larger than the frame size itself.
[How]
In general, we should be able to enter Z8 when this is engaged but it
might be a net power loss even if the calculation wasn't bugged.
Don't support enabling Z8 during the DRR region.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Syed Hassan <syed.hassan@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Remove the brightness cache in DC. It uses a single value to represent
the brightness for both SDR and HDR mode. This leads to flash in HDR
on/off. It also unconditionally programs brightness as in HDR mode. This
may introduce garbage on SDR mode in miniLED panel.
[How]
Simplify the initialization flow by removing the DC cache and taking
what panel has as default. Expand the mechanism for PWM to DPCD Aux to
restore cached brightness value generally.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Camille Cho <camille.cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
If during driver init stage there are greater than 20
intermediary voltage states while constructing the SOC
BB we could hit issues because we will index outside of the
clock_limits array and start overwriting data. Increase the
total number of states to 40 to avoid this issue.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Currently DCN35 does not spread DPREFCLK
[HOW]
Remove hardcoded table with nonzero caps
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Description]
When choosing which dummy p-state latency to use, we
need to use the DRAM speed from validation. The DRAMSpeed
DML variable can change because we use different input
params to DML when populating watermarks set B.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Wrong function is used to translate LUT values to HW format, leading to
visible artifacting in some cases.
[How]
Use the correct cm3_helper function.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We've updated the table but the values aren't being reflected in DML2
calculation.
[How]
Pass them into the bbox overrides.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
We can override SR watermarks but not Z8 ones.
[How]
Add new parameters for Z8 matching the SR ones and feed them into the
states.
These also weren't being applied to every state, so make sure that
we loop over and update all SOC states if given an override.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
In dcn32 DML pipes are ordered the same as dc pipes but only for used
pipes. For example, if dc pipe 1 and 2 are used, their dml pipe indices
would be 0 and 1 respectively. However
update_pipe_slice_table_with_split_flags doesn't skip indices for free
pipes. This causes us to not reference correct dml pipe output when
building pipe topology.
[how]
Use two variables to iterate dc and dml pipes respectively and only
increment dml pipe index when current dc pipe is not free.
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Update to the new values per HW team request. Affects both stutter
and z8.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DML2 means that the dcn3x policy for calculating z-state support
no longer runs from validate_bandwidth.
This means we are unconditionally allowing Z8, the hardware default.
[How]
Port the policy over to DCN35, but with a few modifications:
- Don't use min_dst_y_next_start as a check for Z8/Z10 allow
- Add support for overriding the Z10 stutter period per ASIC
- Cleanup the code to make the policy assignment more clear
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When waiting for the ACK for INBOX0 message,
we have to ensure to include the udelay
for proper wait time
Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
DENTIST hangs when OTG is off and encoder is on. We were not
disabling the encoder properly when switching from extended mode to
external monitor only.
[HOW]
Disable the encoder using an existing enable/disable fifo helper instead
of enc35_stream_encoder_enable.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Flush command sent to DMCUB spends more time for execution on
a dGPU than on an APU. This causes cursor lag when using high
refresh rate mouses.
[HOW]
1. Change the DMCUB mailbox memory location from FB to inbox.
2. Only change windows memory to inbox.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On s0i3, IPS mask isn't saved and restored.
It is reset to zero on exit.
If it is cleared unexpectedly, driver will
proceed operations while DCN is in IPS2 and
cause a hang.
[HOW]
Negate the bit logic. Default value of
zero indicates it is still in IPS2. Driver
must poll for the bit to assert.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some eDP panels' ext caps don't set initial values
and the value of dpcd_addr (0x317) is random.
It means that sometimes the eDP can be OLED, miniLED and etc,
and cause incorrect backlight control interface.
[HOW]
Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When cursor moves across screen boarder, lag cursor observed,
since subvp settings need to sync up with vblank that causes
cursor updates being delayed.
[HOW]
Enable fast plane updates on DCN3.2 to fix it.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The following patch will fix a minor issue where a debug message is
referencing an struct that has just being checked whether is null or
not. This has been noticed by using coccinelle, in the following output:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c:540:25-29: ERROR: aconnector is NULL but dereferenced.
Fixes: 5d72e247e58c ("drm/amd/display: switch DC over to the new DRM logging macros")
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.
If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.
Cc: stable@vger.kernel.org
Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1")
Link: https://github.com/fwupd/fwupd/issues/6327
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Add some null checks to fix an issue where 8k60
tiled display fails to light up.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
For the scenario when a dsc capable MST sink device is directly
connected, it needs to use max dsc compression as the link bw constraint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
HW can return invalid values on register read, guard against these being
set and causing us to access memory out of range and page fault.
[HOW]
Guard at sync_inbox1 and guard at pushing commands.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Spotted by coccicheck, there is a redundant check for
v->SourcePixelFormat[k] != dm_444_16. This patch will
remove it. The corresponding output follows.
drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c:5130:86-122: duplicated argument to && or ||
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
