summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2022-11-02drm/amdkfd: update GFX11 CWSR trap handlerJay Cornwall
With corresponding FW change fixes issue where triggering CWSR on a workgroup with waves in s_barrier wouldn't lead to a back-off and therefore cause a hang. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Tested-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Graham Sider <Graham.Sider@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02drm/amd/display: Investigate tool reported FCLK P-state deviationsNevenko Stupar
[Why] Fix for some of the tool reported modes for FCLK P-state deviations and UCLK P-state deviations that are coming from DSC terms and/or Scaling terms causing MinActiveFCLKChangeLatencySupported and MaxActiveDRAMClockChangeLatencySupported incorrectly calculated in DML for these configurations. Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Add DSC delay factor workaroundGeorge Shen
[Why] Certain 4K high refresh rate modes requiring DSC are exhibiting top of screen underflow corruption. Increasing the DSC delay by a factor of 6 percent stops the underflow for most use cases. [How] Multiply DSC delay requirement in DML by a factor. Add debug option to make this DSC delay factor configurable. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Round up DST_after_scaler to nearest intGeorge Shen
[Why] The DST_after_scaler value that DML spreadsheet outputs is generally the driver value round up to the nearest int. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Use forced DSC bpp in DMLGeorge Shen
[Why] DSC config is calculated separately from DML calculations. DML should use these separately calculated DSC params. The issue is that the calculated bpp is not properly propagated into DML. [How] Correctly used forced_bpp value in DML. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Fix DCN32 DSC delay calculationGeorge Shen
[Why] DCN32 DSC delay calculation had an unintentional integer division, resulting in a mismatch against the DML spreadsheet. [How] Cast numerator to double before performing the division. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amdgpu: Disable GPU reset on SRIOV before remove pci.Gavin Wan
The recent change brought a bug on SRIOV envrionment. It caused unloading amdgpu failed on Guest VM. The reason is that the VF FLR was requested while unloading amdgpu driver, but the VF FLR of SRIOV sequence is wrong while removing PCI device. For SRIOV, the guest driver should not trigger the whole XGMI hive to do the reset. Host driver control how the device been reset. Fixes: f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2") Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Signed-off-by: Gavin Wan <Gavin.Wan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amdgpu: disable GFXOFF during compute for GFX11Graham Sider
Temporary workaround to fix issues observed in some compute applications when GFXOFF is enabled on GFX11. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02drm/amd: Fail the suspend if resources can't be evictedMario Limonciello
If a system does not have swap and memory is under 100% usage, amdgpu will fail to evict resources. Currently the suspend carries on proceeding to reset the GPU: ``` [drm] evicting device resources failed [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12 [drm] free PSP TMR buffer [TTM] Failed allocating page table [drm] evicting device resources failed amdgpu 0000:03:00.0: amdgpu: MODE1 reset amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset ``` At this point if the suspend actually succeeded I think that amdgpu would have recovered because the GPU would have power cut off and restored. However the kernel fails to continue the suspend from the memory pressure and amdgpu fails to run the "resume" from the aborted suspend. ``` ACPI: PM: Preparing to enter system sleep state S3 SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO) cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0 node 0: slabs: 22, objs: 1122, free: 0 ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651) [drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed! [drm:psp_resume [amdgpu]] *ERROR* PSP resume failed [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62 amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62). PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62 amdgpu 0000:03:00.0: PM: failed to resume async: error -62 ``` To avoid this series of unfortunate events, fail amdgpu's suspend when the memory eviction fails. This will let the system gracefully recover and the user can try suspend again when the memory pressure is relieved. Reported-by: post@davidak.de Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()Yang Li
./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2549 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-02drm/amdgpu: correct MES debugfs versionsGraham Sider
Use mes.sched_version, mes.kiq_version for debugfs as mes.ucode_fw_version does not contain correct versioning information. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amdgpu: set fb_modifiers_not_supported in vkmsYifan Zhang
This patch to fix the gdm3 start failure with virual display: /usr/libexec/gdm-x-session[1711]: (II) AMDGPU(0): Setting screen physical size to 270 x 203 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument /usr/libexec/gdm-x-session[1711]: (WW) AMDGPU(0): Failed to set mode on CRTC 0 /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to enable any CRTC gnome-shell[1840]: Running GNOME Shell (using mutter 42.2) as a X11 window and compositing manager /usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument vkms doesn't have modifiers support, set fb_modifiers_not_supported to bring the gdm back. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: cursor update command incompleteMax Tseng
Missing send cursor_rect width & Height into DMUB. PSR-SU would use these information. But missing these assignment in last refactor commit Reported-by: Timur Kristóf <timur.kristof@gmail.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2227 Fixes: b73353f7f3d4 ("drm/amd/display: Use the same cursor info across features") Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Enable timing sync on DCN32Alvin Lee
Missed enabling timing sync on DCN32 because DCN32 has a different DML param. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Set memclk levels to be at least 1 for dcn32Dillon Varone
[Why] Cannot report 0 memclk levels even when SMU does not provide any. [How] When memclk levels reported by SMU is 0, set levels to 1. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02drm/amd/display: Update latencies on DCN321Dillon Varone
Update DF related latencies based on new measurements. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02drm/amd/display: Limit dcn32 to 1950Mhz display clockJun Lei
[why] Hardware team recommends we limit dispclock to 1950Mhz for all DCN3.2.x [how] Limit to 1950 when initializing clocks. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-11-02drm/amd/display: Ignore Cable ID FeatureFangzhi Zuo
Ignore cable ID for DP2 receivers that does not support the feature. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-02drm/amd/display: Update DSC capabilitie for DCN314Leo Chen
dcn314 has 4 DSC - conflicted hardware document updated and confirmed. Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x
2022-10-26drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resumePrike Liang
In the S2idle suspend/resume phase the gfxoff is keeping functional so some IP blocks will be likely to reinitialize at gfxoff entry and that will result in failing to program GC registers.Therefore, let disallow gfxoff until AMDGPU IPs reinitialized completely. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.15.x
2022-10-24drm/amd/display: Revert logic for plane modifiersJoaquín Ignacio Aramendía
This file was split in commit 5d945cbcd4b16a29d6470a80dfb19738f9a4319f ("drm/amd/display: Create a file dedicated to planes") and the logic in dm_plane_format_mod_supported() function got changed by a switch logic. That change broke drm_plane modifiers setting on series 5000 APUs (tested on OXP mini AMD 5800U and HP Dev One 5850U PRO) leading to Gamescope not working as reported on GitHub[1] To reproduce the issue, enter a TTY and run: $ gamescope -- vkcube With said commit applied it will abort. This one restores the old logic, fixing the issue that affects Gamescope. [1](https://github.com/Plagman/gamescope/issues/624) Cc: <stable@vger.kernel.org> # 6.0.x Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com> Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdkfd: correct the cache info for gfx1036Jesse Zhang
correct the cache information for gfx1036 Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-10-24drm/amdkfd: update gfx1037 Lx cache settingPrike Liang
Update the gfx1037 L1/L2 cache setting. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-10-24drm/amdgpu: skip mes self test for gc 11.0.3 in recoverYuBiao Wang
Temporary disable mes self teset for gc 11.0.3 during gpu_recovery. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd: Add IMU fw version to fw version queriesDavid Francis
IMU is a new firmware for GFX11. There are four means by which firmware version can be queried from the driver: device attributes, vf2pf, debugfs, and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl. Add IMU as an option for those four methods. V2: Added debugfs Reviewed-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Don't return false if no streamAlvin Lee
pipe_ctx[i] exists even if the pipe is not in use. If the pipe is not in use it will always have a null stream, so don't return false in this case. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/display: Remove wrong pipe control lockRodrigo Siqueira
When using a device based on DCN32/321, we have an issue where a second 4k@60Hz display does not light up, and the system becomes unresponsive for a few minutes. In the debug process, it was possible to see a hang in the function dcn20_post_unlock_program_front_end in this part: for (j = 0; j < TIMEOUT_FOR_PIPE_ENABLE_MS*1000 && hubp->funcs->hubp_is_flip_pending(hubp); j++) mdelay(1); } The hubp_is_flip_pending always returns positive for waiting pending flips which is a symptom of pipe hang. Additionally, the dmesg log shows this message after a few minutes: BUG: soft lockup - CPU#4 stuck for 26s! ... [ +0.000003] dcn20_post_unlock_program_front_end+0x112/0x340 [amdgpu] [ +0.000171] dc_commit_state_no_check+0x63d/0xbf0 [amdgpu] [ +0.000155] ? dc_validate_global_state+0x358/0x3d0 [amdgpu] [ +0.000154] dc_commit_state+0xe2/0xf0 [amdgpu] This confirmed the hypothesis that we had a pipe hanging somewhere. Next, after checking the ftrace entries, we have the below weird sequence: [..] 2) | dcn10_lock_all_pipes [amdgpu]() { 2) 0.120 us | optc1_is_tg_enabled [amdgpu](); 2) | dcn20_pipe_control_lock [amdgpu]() { 2) | dc_dmub_srv_clear_inbox0_ack [amdgpu]() { 2) 0.121 us | amdgpu_dm_dmub_reg_write [amdgpu](); 2) 0.551 us | } 2) | dc_dmub_srv_send_inbox0_cmd [amdgpu]() { 2) 0.110 us | amdgpu_dm_dmub_reg_write [amdgpu](); 2) 0.511 us | } 2) | dc_dmub_srv_wait_for_inbox0_ack [amdgpu]() { 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); 2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu](); [..] We are not expected to read from dmub register so many times and for so long. From the trace log, it was possible to identify that the function dcn20_pipe_control_lock was triggering the dmub operation when it was unnecessary and causing the hang issue. This commit drops the unnecessary dmub code and, consequently, fixes the second display not lighting up the issue. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amd/pm: allow gfxoff on gc_11_0_3Kenneth Feng
allow gfxoff on gc_11_0_3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()Rafael Mendonca
If the number of pages from the userptr BO differs from the SG BO then the allocated memory for the SG table doesn't get freed before returning -EINVAL, which may lead to a memory leak in some error paths. Fix this by checking the number of pages before allocating memory for the SG table. Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-24drm/amdgpu: Remove ATC L2 access for MMHUB 2.1.xLijo Lazar
MMHUB 2.1.x versions don't have ATCL2. Remove accesses to ATCL2 registers. Since they are non-existing registers, read access will cause a 'Completer Abort' and gets reported when AER is enabled with the below patch. Tagging with the patch so that this is backported along with it. v2: squash in uninitialized warning fix (Nathan Chancellor) Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-10-21drm/amdgpu: Adjust MES polling timeout for sriovYiqing Yao
[why] MES response time in sriov may be longer than default value due to reset or init in other VF. A timeout value specific to sriov is needed. [how] When in sriov, adjust the timeout value to calculated worst case scenario. Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-21drm/amd/pm: update driver-if header for smu_v13_0_10Kenneth Feng
update driver-if header for smu_v13_0_10 and merge with smu_v13_0_0 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-21drm/amdgpu: fix pstate setting issueChengming Gui
[WHY] 0, original pstate X 1, ctx_A_create -> ctx_A->stable_pstate = X 2, ctx_A_set_pstate (Y) -> current pstate is Y (PEAK or STANDARD) 3, ctx_B_create -> ctx_B->stable_pstate = Y 4, ctx_A_destroy -> restore pstate to X 5, ctx_B_destroy -> restore pstate to Y Above sequence will cause final pstate is wrong (Y), should be original X. [HOW] When ctx_B create, if ctx_A touched pstate setting (not auto, stable_pstate_ctx != NULL), set ctx_B->stable_pstate the same value as ctx_A saved, if stable_pstate_ctx == NULL, fetch current pstate to fill ctx_B->stable_pstate. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-10-21Merge tag 'drm-misc-fixes-2022-10-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v6.1-rc2: - Fix a buffer overflow in format_helper_test. - Set DDC pointer in drmm_connector_init. - Compiler fixes for panfrost. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c4d05683-8ebe-93b8-d24c-d1d2c68f12c4@linux.intel.com
2022-10-20drm/amdgpu: fix sdma doorbell init ordering on APUsAlex Deucher
Commit 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") uncovered a bug in amdgpu that required a reordering of the driver init sequence to avoid accessing a special register on the GPU before it was properly set up leading to an PCI AER error. This reordering uncovered a different hw programming ordering dependency in some APUs where the SDMA doorbells need to be programmed before the GFX doorbells. To fix this, move the SDMA doorbell programming back into the soc15 common code, but use the actual doorbell range values directly rather than the values stored in the ring structure since those will not be initialized at this point. This is a partial revert, but with the doorbell assignment fixed so the proper doorbell index is set before it's used. Fixes: e3163bc8ffdfdb ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega") Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: skhan@linuxfoundation.org Cc: stable@vger.kernel.org
2022-10-20Merge drm/drm-fixes into drm-misc-fixesThomas Zimmermann
Backmerging to get v6.1-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2022-10-19drm/amdgpu: use DRM_SCHED_FENCE_DONT_PIPELINE for VM updatesChristian König
Make sure that we always have a CPU round trip to let the submission code correctly decide if a TLB flush is necessary or not. Signed-off-by: Christian König <christian.koenig@amd.com> Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2113#note_1579296 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014081553.114899-2-christian.koenig@amd.com
2022-10-18drm/amdgpu: Fix for BO move issueArunpravin Paneer Selvam
A user reported a bug on CAPE VERDE system where uvd_v3_1 IP component failed to initialize as there is an issue with BO move code from one memory to other. In function amdgpu_mem_visible() called by amdgpu_bo_move(), when there are no blocks to compare or if we have a single block then break the loop. Fixes: 312b4dc11d4f ("drm/amdgpu: Fix VRAM BO swap issue") Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amdgpu: dequeue mes scheduler during finiYuBiao Wang
[Why] If mes is not dequeued during fini, mes will be in an uncleaned state during reload, then mes couldn't receive some commands which leads to reload failure. [How] Perform MES dequeue via MMIO after all the unmap jobs are done by mes and before kiq fini. v2: Move the dequeue operation inside kiq_hw_fini. Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Jack Xiao <Jack.Xiao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amd/pm: enable thermal alert on smu_v13_0_10Kenneth Feng
enable thermal alert on smu_v13_0_10 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amdgpu: Program GC registers through RLCG interface in gfx_v11/gmc_v11Yifan Zha
[Why] L1 blocks most of GC registers accessing by MMIO. [How] Use RLCG interface to program GC registers under SRIOV VF in full access time. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amdkfd: Fix type of reset_type parameter in hqd_destroy() callbackNathan Chancellor
When booting a kernel compiled with CONFIG_CFI_CLANG on a machine with an RX 6700 XT, there is a CFI failure in kfd_destroy_mqd_cp(): [ 12.894543] CFI failure at kfd_destroy_mqd_cp+0x2a/0x40 [amdgpu] (target: hqd_destroy_v10_3+0x0/0x260 [amdgpu]; expected type: 0x8594d794) Clang's kernel Control Flow Integrity (kCFI) makes sure that all indirect call targets have a type that exactly matches the function pointer prototype. In this case, hqd_destroy()'s third parameter, reset_type, should have a type of 'uint32_t' but every implementation of this callback has a third parameter type of 'enum kfd_preempt_type'. Update the function pointer prototype to match reality so that there is no more CFI violation. Link: https://github.com/ClangBuiltLinux/linux/issues/1738 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amd/display: Increase frame size limit for display_mode_vba_util_32.oGuenter Roeck
Building 32-bit images may fail with the following error. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c: In function ‘dml32_UseMinimumDCFCLK’: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:3142:1: error: the frame size of 1096 bytes is larger than 1024 bytes This is seen when building i386:allmodconfig with any of the following compilers. gcc (Debian 12.2.0-3) 12.2.0 gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0 The problem is not seen if the compiler supports GCC_PLUGIN_LATENT_ENTROPY because in that case CONFIG_FRAME_WARN is already set to 2048 even for 32-bit builds. dml32_UseMinimumDCFCLK() was introduced with commit dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321"). It declares a large number of local variables. Increase the frame size for the affected file to 2048, similar to other files in the same directory, to enable 32-bit build tests with affected compilers. Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321") Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reported-by: Łukasz Bartosik <ukaszb@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amd/pm: add SMU IP v13.0.4 IF version define to V7Tim Huang
The pmfw has changed the driver interface version, so keep same with the fw. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amd/pm: update SMU IP v13.0.4 driver interface versionTim Huang
Update the SMU driver interface version to V7. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amd/pm: Init pm_attr_list when dpm is disabledZhenGuo Yin
[Why] In SRIOV multi-vf, dpm is always disabled, and pm_attr_list won't be initialized. There will be a NULL pointer call trace after removing the dpm check condition in amdgpu_pm_sysfs_fini. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:amdgpu_device_attr_remove_groups+0x20/0x90 [amdgpu] Call Trace: <TASK> amdgpu_pm_sysfs_fini+0x2f/0x40 [amdgpu] amdgpu_device_fini_hw+0xdf/0x290 [amdgpu] [How] List pm_attr_list should be initialized when dpm is disabled. Fixes: a6ad27cec585fe ("drm/amd/pm: Remove redundant check condition") Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amd/pm: disable cstate feature for gpu reset scenarioEvan Quan
Suggested by PMFW team and same as what did for gfxoff feature. This can address some Mode1Reset failures observed on SMU13.0.0. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amd/pm: fulfill SMU13.0.7 cstate control interfaceEvan Quan
Fulfill the functionality for cstate control. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amd/pm: fulfill SMU13.0.0 cstate control interfaceEvan Quan
Fulfill the functionality for cstate control. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.0.x Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-18drm/amdgpu: Add sriov vf ras support in amdgpu_ras_asic_supportedYiPeng Chai
V2: Add sriov vf ras support in amdgpu_ras_asic_supported. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-09-08 06:02:23 +0000