summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2023-02-03Revert "Revert "drm/amdgpu/gmc11: enable AGP aperture""Alex Deucher
This reverts commit 1a65327a84db5b9081a51ccb1c562083f59bfcec. This should be resolved so we can re-enable this. Also, the AGP apeture was bring programmed to 0 on MMHUB 3.0.1 since agp_start and end were not being set. Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: properly handling AGP aperture in vm setupAlex Deucher
Take into account whether or not the AGP aperture is enabled or not when calculating the system aperture. Fixes white screens with DCN 3.1.4. Based on a patch from Yifan Zhang <yifan1.zhang@amd.com> Cc: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: disable S/G display on DCN 3.1.2/3Alex Deucher
Causes flickering or white screens in some configurations. Disable it for now until we can fix the issue. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352 Cc: roman.li@amd.com Cc: yifan1.zhang@amd.com Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: disable S/G display on DCN 2.1.0Alex Deucher
Causes flickering or white screens in some configurations. Disable it for now until we can fix the issue. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2352 Cc: roman.li@amd.com Cc: yifan1.zhang@amd.com Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amdgpu: Remove writing GRBM_GFX_CNTL in RLCG interface under SRIOVYifan Zha
[Why] Accessing GRBM_GFX_CNTL in full access time has risk when VF is doing MMIO attacking. Therefore, VF writing GRBM_GFX_CNTL are blocked by L1 Policy. For RLCG interface, RLCG use SCRATCH_REG2 which is copied from GRBM_GFX_CNTL. [How] Remove writing GRBM_GFX_CNTL in amdgpu_virt_rlcg_reg_rw. v2: Remove directly writing GRBM_GFX_INDEX in amdgpu_virt_rlcg_reg_rw as RLCG interface no need to use it. Signed-off-by: Yifan Zha <Yifan.Zha@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amdgpu: always sending PSP messages LOAD_ASD and UNLOAD_TAVitaly Prosyak
We allow sending PSP messages LOAD_ASD and UNLOAD_TA without acquiring a lock in drm_dev_enter during driver unload because we must call drm_dev_unplug as the beginning of unload driver sequence. Added WARNING if other PSP messages are sent without a lock. After this commit, the following commands would work -sudo modprobe -r amdgpu -sudo modprobe amdgpu Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: Trivial swizzle-related code clean-upsGuilherme G. Piccoli
This is a very trivial code clean-up related to commit 5468c36d6285 ("drm/amd/display: Filter Invalid 420 Modes for HDMI TMDS"). This commit added a validation on driver probe to prevent invalid TMDS modes, but one of the fake properties (swizzle) ended-up causing a warning on driver probe; was reported here: https://gitlab.freedesktop.org/drm/amd/-/issues/2264. It was fixed by commit a1cbe6916f44 ("drm/amd/display: patch cases with unknown plane state to prevent warning"), but the validation code had a double variable assignment, which we hereby remove. Also, the fix relies in the dcn2{0,1}patch_unknown_plane_state() callbacks, so while at it we took the opportunity to perform a small code clean-up in such routines. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Daniel Wheeler <daniel.wheeler@amd.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Mark Broadworth <mark.broadworth@amd.com> Cc: Melissa Wen <mwen@igalia.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Sung Joon Kim <Sungjoon.Kim@amd.com> Cc: Swapnil Patel <Swapnil.Patel@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: reduce else-if to else in dcn32_calculate_dlg_params()Tom Rix
cppcheck reports drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: style: Expression is always true because 'else if' condition is opposite to previous condition at line 1396. [multiCondition] } else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) { ^ drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1396:69: note: first condition if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type != SUBVP_PHANTOM) { ^ drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c:1403:76: note: else if condition is opposite to first condition } else if (context->res_ctx.pipe_ctx[i].stream->mall_stream_config.type == SUBVP_PHANTOM) { It is not necessary to explicitly the check != condition, an else is simplier. Fixes: 238debcaebe4 ("drm/amd/display: Use DML for MALL SS and Subvp allocation calculations") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amd/display: reduce else-if to else in dcn10_blank_pixel_data()Tom Rix
checkpatch reports drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: style: Expression is always true because 'else if' condition is opposite to previous condition at line 2895. [multiCondition] } else if (blank) { ^ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2895:6: note: first condition if (!blank) { ^ drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c:2902:13: note: else if condition is opposite to first condition } else if (blank) { It is not necessary to explicitly the check != condition, an else is simplier. Fixes: aa5a57773042 ("drm/amd/display: Vari-bright looks disabled near end of MM14") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amdgpu/display: remove duplicate include header in filesye xingchen
opp.h is included more than once. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-02-03drm/amdgpu: Fix a typo ("boradcast")Jonathan Neuschäfer
Spell it as "broadcast". Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Properly handle additional cases where DCN is not supportedAlex Deucher
There could be boards with DCN listed in IP discovery, but no display hardware actually wired up. In this case the vbios display table will not be populated. Detect this case and skip loading DM when we detect it. v2: Mark DCN as harvested as well so other display checks elsewhere in the driver are handled properly. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amdgpu: Enable vclk dclk node for gc11.0.3Yiqing Yao
These sysfs nodes are tested supported, so enable them. Signed-off-by: Yiqing Yao <yiqing.yao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd: Fix initialization for nbio 4.3.0Mario Limonciello
A mistake has been made on some boards with NBIO 4.3.0 where some NBIO registers aren't properly set by the hardware. Ensure that they're set during initialization. Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com> Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com> Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amdgpu: enable HDP SD for gfx 11.0.3Evan Quan
Enable HDP clock gating control for gfx 11.0.3. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.4/11Tim Huang
PMFW will handle the features disablement properly for gpu reset case, driver involvement may cause some unexpected issues. Cc: stable@vger.kernel.org # 6.1 Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: 3.2.221Aric Cyr
This version brings along following fixes: - fix linux dp link lost handled only one time - Reset DMUB mailbox SW state after HW reset - Unassign does_plane_fit_in_mall function from dcn3.2 - Add Function delaration in dc_link - Fix crash when connecting 2 displays with video playback - Adjust downscaling limits for dcn314 - fix FCLK pstate change underflow - Fix only one ABM pipe enabled under ODM combined case - Add missing brackets in calculation - Correct bw_params population - Fix Z8 support configurations - Add Debug Log for MST and PCON - fix MALL size hardcoded for DCN321 - add rc_params_override option in dc_dsc_config - Enable Freesync over PCon Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: fix linux dp link lost handled only one timeHersen Wu
[Why] linux amdgpu defer handle link lost irq. dm add handle request to irq work queue for the first irq of link lost. if link training fails for link lost handle, link will not be enabled anymore. [How] allow adding handle request of link lost to work queue before running dp link training for link lost. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Reset DMUB mailbox SW state after HW resetNicholas Kazlauskas
[Why] Otherwise we can be out of sync with what's in the hardware, leading to us rerunning every command that's presently in the ringbuffer. [How] Reset software state for the mailboxes in hw_reset callback. This is already done as part of the mailbox init in hw_init, but we do need to remember to reset the last cached wptr value as well here. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Unassign does_plane_fit_in_mall function from dcn3.2George Shen
[Why] The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics. Using it with dcn3.2 can result in undefined behaviour. [How] Assign the function pointer to NULL. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Add Function declaration in dc_linkMustapha Ghaddar
[WHY] Housekeeping cleaning and adding declaration for function to be called from DM layer [HOW] Adding public functions to dc_link.h Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Revert "avoid disable otg when dig was disabled"Aric Cyr
This reverts commit 7cf5ceb30d4d527d763ae78c5405e3faca1fb8b1. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Adjust downscaling limits for dcn314Daniel Miess
[Why] Lower max_downscale_ratio and ARGB888 downscale factor to prevent cases where underflow may occur on dcn314 [How] Set max_downscale_ratio to 400 and ARGB downscale factor to 250 for dcn314 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: fix FCLK pstate change underflowVladimir Stempen
[Why] Currently we set FCLK p-state change watermark calculated based on dummy p-state latency when UCLK p-state is not supported [How] Calculate FCLK p-state change watermark based on on FCLK pstate change latency in case UCLK p-state is not supported Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Fix only one ABM pipe enabled under ODM combined caseLeon Huang
[Why] ABM set pipe before updating ODM status, it leads to incorrect ABM pipe setting when enabling ODM combine. [How] Call ABM set pipe flow after ODM status update in program pipe sequence. Reviewed-by: Chun-Liang Chang <Chun-Liang.Chang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Add missing brackets in calculationDaniel Miess
[Why] Brackets missing in the calculation for MIN_DST_Y_NEXT_START [How] Add missing brackets for this calculation Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Correct bw_params populationDaniel Miess
[Why] Underflow observed during P010 video playback on dcn314 due to incorrectly populated bw_params [How] Populate fclk, memclk and voltage in bw_params with values from max pstate rather than min pstate Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Fix Z8 support configurationsNicholas Kazlauskas
[Why] It's not supported in multi-display, but it is supported in 2nd eDP screen only. [How] Remove multi display support, restrict number of planes for all z-states support, but still allow Z8 if we're not using PWRSEQ0. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Add Debug Log for MST and PCONFangzhi Zuo
Add log for MST/PCON specific use case: 1. If DP1.2 hub where gives reduced link bw and no dsc support. 2. If less than 4-lane configuration where gives reduced bw. 3. If FRL PCON enabled for asic. 4. Track MST sink count. Reviewed-by: Hersen Wu <Hersenxs.Wu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: fix MALL size hardcoded for DCN321Samson Tam
[Why] MALL size available can vary for different SKUs MALL size was still hardcoded for DCN321 [How] Remove hardcoding MALL size for DCN321 Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: add rc_params_override option in dc_dsc_configWenjing Liu
[why] Current RC params are based on VESA recommended configurations. Some DSC sink may prefer non standard rc params values due to hardware limitations. To support those DSC sink we will allow DM to optionally pass rc_params_ovrd in dc_dsc_config so DC will override the default VESA recommended configurations. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd/display: Enable Freesync over PConSung Joon Kim
[why] Enable Freesync over PCon on Linux environment. [how] Adding Freesync over PCon support in amdgpu_dm - Read DPCD for Freesync over PCon capabilitiy - Add whitelist for compatible branch devices Reviewed-by: Chao-kai Wang <Stylon.Wang@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Sung Joon Kim <sungkim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amdgpu: update wave data type to 3 for gfx11Graham Sider
SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update wave data type to signify a difference. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31drm/amd: Allow s0ix without BIOS supportMario Limonciello
We guard the suspend entry code from running unless we have proper BIOS support for either S3 mode or s0ix mode. If a user's system doesn't support either of these modes the kernel still does offer s2idle in `/sys/power/mem_sleep` so there is an expectation from users that it works even if the power consumption remains very high. Rafael Ávila de Espíndola reports that a system of his has a non-functional graphics stack after resuming. That system doesn't support S3 and the FADT doesn't indicate support for low power idle. Through some experimentation it was concluded that even without the hardware s0i3 support provided by the amd_pmc driver the power consumption over suspend is decreased by running amdgpu's s0ix suspend routine. The numbers over suspend showed: * No patch: 9.2W * Skip amdgpu suspend entirely: 10.5W * Run amdgpu s0ix routine: 7.7W As this does improve the power, remove some of the guard rails in `amdgpu_acpi.c` for only running s0ix suspend routines in the right circumstances. However if this turns out to cause regressions for anyone, we should revert this change and instead opt for skipping suspend/resume routines entirely or try to fix the underlying behavior that makes graphics fail after resume without underlying platform support. Reported-by: Rafael Ávila de Espíndola <rafael@espindo.la> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2364 Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31Revert "drm/amdgpu: TA unload messages are not actually sent to psp when ↵Vitaly Prosyak
amdgpu is uninstalled" This reverts commit fac53471d0ea9693d314aa2df08d62b2e7e3a0f8. The following change: move the drm_dev_unplug call after amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is the following: amdgpu_pci_remove calls drm_dev_unregister and it should be called first to ensure userspace can't access the device instance anymore. If we call drm_dev_unplug after amdgpu_driver_unload_kms then we observe IGT PCI software unplug test failure (kernel hung) for all ASICs. This is how this regression was found. After this revert, the following commands do work not, but it would be fixed in the next commit: - sudo modprobe -r amdgpu - sudo modprobe amdgpu Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-31Merge v6.2-rc6 into drm-nextDaniel Vetter
Due to holidays we started -next with more -fixes in-flight than usual, and people have been asking where they are. Backmerge to get things better in sync. Conflicts: - Tiny conflict in drm_fbdev_generic.c between variable rename and missing error handling that got added. - Conflict in drm_fb_helper.c between the added call to vgaswitcheroo in drm_fb_helper_single_fb_probe and a refactor patch that extracted lots of helpers and incidentally removed the dev local variable. Readd it to make things compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-01-30Merge tag 'amd-drm-next-6.3-2023-01-27' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-27: amdgpu: - GC11 fixes - SMU13 fixes - Freesync fixes - DP MST fixes - DP MST code rework and cleanup - AV1 fixes for VCN4 - DCN 3.2.x fixes - PSR fixes - DML optimizations - DC link code rework Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230127225917.2419162-1-alexander.deucher@amd.com
2023-01-27amdgpu: fix build on non-DCN platforms.Dave Airlie
This fixes the build here locally on my 32-bit arm build. Signed-off-by: Dave Airlie <airlied@redhat.com> (cherry picked from commit f439a959dcfb6b39d6fd4b85ca1110a1d1de1587) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-27amdgpu: fix build on non-DCN platforms.Dave Airlie
This fixes the build here locally on my 32-bit arm build. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-01-25drm/amd/display: Fix timing not changning when freesync video is enabledAurabindo Pillai
[Why&How] Switching between certain modes that are freesync video modes and those are not freesync video modes result in timing not changing as seen by the monitor due to incorrect timing being driven. The issue is fixed by ensuring that when a non freesync video mode is set, we reset the freesync status on the crtc. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-25drm/amdgpu/display/mst: update mst_mgr relevant variable when long HPDWayne Lin
[Why & How] Now the vc_start_slot is controlled at drm side. When we service a long HPD, we still need to run dm_helpers_dp_mst_write_payload_allocation_table() to update drm mst_mgr's relevant variable. Otherwise, on the next plug-in, payload will get assigned with a wrong start slot. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171 Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state") Cc: stable@vger.kernel.org # 6.1 Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Tested-by: Didier Raboud <odyx@debian.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-25drm/amdgpu/display/mst: limit payload to be updated one by oneWayne Lin
[Why] amdgpu expects to update payload table for one stream one time by calling dm_helpers_dp_mst_write_payload_allocation_table(). Currently, it get modified to try to update HW payload table at once by referring mst_state. [How] This is just a quick workaround. Should find way to remove the temporary struct dc_dp_mst_stream_allocation_table later if set struct link_mst_stream_allocatio directly is possible. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171 Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state") Cc: stable@vger.kernel.org # 6.1 Acked-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Tested-by: Didier Raboud <odyx@debian.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-25drm/amdgpu/display/mst: Fix mst_state->pbn_div and slot count assignmentsLyude Paul
Looks like I made a pretty big mistake here without noticing: it seems when I moved the assignments of mst_state->pbn_div I completely missed the fact that the reason for us calling drm_dp_mst_update_slots() earlier was to account for the fact that we need to call this function using info from the root MST connector, instead of just trying to do this from each MST encoder's atomic check function. Otherwise, we end up filling out all of DC's link information with zeroes. So, let's restore that and hopefully fix this DSC regression. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171 Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state") Cc: stable@vger.kernel.org # 6.1 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Didier Raboud <odyx@debian.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-25drm/amdgpu: declare firmware for new MES 11.0.4Li Ma
To support new mes ip block Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-25drm/amdgpu: enable imu firmware for GC 11.0.4Li Ma
The GC 11.0.4 needs load IMU to power up GFX before loads GFX firmware. Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-25drm/amd/pm: add missing AllowIHInterrupt message mapping for SMU13.0.0Evan Quan
Add SMU13.0.0 AllowIHInterrupt message mapping. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-01-25drm/amdgpu: remove unconditional trap enable on add gfx11 queuesJonathan Kim
Rebase of driver has incorrect unconditional trap enablement for GFX11 when adding mes queues. Reported-by: Graham Sider <graham.sider@amd.com> Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Graham Sider <graham.sider@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-01-25Merge tag 'amd-drm-next-6.3-2023-01-20' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.3-2023-01-20: amdgpu: - Secure display fixes - Fix scaling - Misc code cleanups - Display BW alloc logic updates - DCN 3.2 fixes - Fix power reporting on certain firmwares for CZN/RN - SR-IOV fixes - Link training cleanup and code rework - HDCP fixes - Reserved VMID fix - Documentation updates - Colorspace fixes - RAS updates - GC11.0 fixes - VCN instance harvesting fixes - DCN 3.1.4/5 workarounds for S/G displays - Add PCIe info to the INFO IOCTL amdkfd: - XNACK fix UAPI: - Add PCIe gen/lanes info to the amdgpu INFO IOCTL Nesa ultimately plans to use this to make decisions about buffer placement optimizations Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20790 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230120234523.7610-1-alexander.deucher@amd.com
2023-01-24drm/amdgpu/vcn4: add missing encoder capAlex Deucher
VCN4.x supports AV1 encode. Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-24drm/amd/display: 3.2.220Aric Cyr
This version brings along following fixes: - Fix timing not changning when freesync video is enabled - avoid disable otg when dig was disabled - Properly reuse completion structure - Pass DSC slice height to PSR FW - merge dc_link_dp into dc_link - move dp cts functions from dc_link_dp to link_dp_cts - move dp irq handler functions from dc_link_dp to link_dp_irq_handler - Enable AdaptiveSync in DC interface - adjust MALL size available for DCN32 and DCN321 - Set init freq for DCFCLK DS - Use |= when assigning wm_optimized_required - move eDP panel control logic to link_edp_panel_control - create accessories, hwss and protocols sub folders in link - Disable SubVP for PSR panels Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 16:44:40 +0000