summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_ddi.c
AgeCommit message (Collapse)Author
2023-12-13drm/i915: Split intel_ddi_compute_min_voltage_level() into platform variantsVille Syrjälä
The mess inside intel_ddi_compute_min_voltage_level() is illegible. Clean it up a bit by splitting the internals into per-platform functions. TODO: make it a vfunc? Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231128115138.13238-7-ville.syrjala@linux.intel.com Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
2023-11-23drm/i915: Hoist the encoder->audio_{enable,disable}() calls higher upVille Syrjälä
Push the encoder->audio_{enable,disable}() calls out from the encoder->{enable,disable}() hooks. Moving towards audio fastset. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-10-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Convert audio enable/disable into encoder vfuncsVille Syrjälä
Add encoder vfuncs for audio enable/disable. This will allow audio to be enabled/disabled during fastsets. An encoder hook is necessary as on pre-hsw platforms different encoder types implement audio in different ways. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-9-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Push audio enable/disable further outVille Syrjälä
Push the audio enable/disable to be the last/first thing respectively that is done in the encoder enable/disable hooks. The goal is to move it further out of these encoder hooks entirely. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-5-ville.syrjala@linux.intel.com
2023-11-14drm/i915/dp: Tune down FEC detection timeout error messageImre Deak
At least a Realtek DP branch device with the OUI 00-e0-4c dev-ID Dp1.4 HW-rev 1.0 SW-rev 131.1 device identification doesn't report detecting the FEC decoding start symbol. Tune down the corresponding error to a debug message. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113142051.258864-1-imre.deak@intel.com
2023-11-10drm/i915/panelreplay: enable/disable panel replayAnimesh Manna
TRANS_DP2_CTL register is programmed to enable panel replay from source and sink is enabled through panel replay dpcd configuration address. Bspec: 1407940617 v1: Initial version. v2: - Use pr_* flags instead psr_* flags. [Jouni] - Remove intel_dp_is_edp check as edp1.5 also has panel replay. [Jouni] v3: Cover letter updated and selective fetch condition check is added before updating its bit in PSR2_MAN_TRK_CTL register. [Jouni] v4: Selective fetch related PSR2_MAN_TRK_CTL programmming dropped. [Jouni] v5: Added PSR2_MAN_TRK_CTL programming as needed for Continuous Full Frame (CFF) update. v6: Rebased on latest. Note: Initial plan is to enable panel replay in full-screen live active frame update mode. In a incremental approach panel replay will be enabled in selctive update mode if there is any gap in curent implementation. Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Arun R Murthy <arun.r.murthy@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231108072303.3414118-6-animesh.manna@intel.com
2023-11-08drm/i915/dp: Enable DSC via the connector decompression AUXImre Deak
Enable DSC using the DSC AUX device stored for this purpose in the connector. For clarity add separate functions to enable/disable the decompression, since these sequences will diverge more in follow-up patches that also enable/disable DSC passthrough and on MST do the actual enabling/disabling only for the first/last user of the given AUX device. As a preparation for the latter refcounting change, also pass the atomic state to the functions. While at it set/clear only the DP_DECOMPRESSION_EN flag in the DP_DSC_ENABLE DPCD register, preserving the reserved register bits. Besides preserving the reserved register bits, the behavior stays as before, as DSC is still only enabled for the first MST stream (which a follow-up patch changes, enabling it for all streams). v2: - Add a helper function setting/clearing the decompression flag, preserving the reserved register bits. v3: - Add separate functions to enable/disable decompression and pass the atomic state to these. - Add DocBook for both functions. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v2) Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-24-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Enable decompression in the sink from the MST encoder hooksImre Deak
Enable/disable the DSC decompression in the sink/branch from the MST encoder hooks. This prepares for an upcoming patch toggling DSC for each stream as needed, but for now keeps the current behavior, as DSC is only enabled for the first MST stream. v2: - Rebased on latest drm-tip. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-5-imre.deak@intel.com
2023-11-08drm/i915/dp: Disable FEC ready flag in the sinkImre Deak
Disable the FEC ready flag in the sink during a disabling modeset. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-21-imre.deak@intel.com
2023-11-08drm/i915/dp: Wait for FEC detected status in the sinkImre Deak
As required by the DP standard wait for the sink to detect the FEC decode enabling symbol sent by the source. There is a difference between SST and MST when the source enables the FEC encoding: on SST this happens only after enabling the transcoder, whereas on MST it happens already after enabling the transcoder function (before enabling the transcoder). Wait for the detected status at the earliest spot accordingly. v2: - Wait for the FEC detected status on SST after the transcoder is enabled. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-20-imre.deak@intel.com
2023-11-08drm/i915/dp: Rename intel_ddi_disable_fec_state() to intel_ddi_disable_fec()Imre Deak
Rename intel_ddi_disable_fec_state() to intel_ddi_disable_fec(), for symmetry with intel_ddi_enable_fec(). Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-19-imre.deak@intel.com
2023-11-08drm/i915/dp_mst: Program the DSC PPS SDP for each streamImre Deak
Atm the DSC PPS SDP is programmed only if the first stream is compressed and then it's programmed only for the first stream. This left all other compressed streams blank. Program the SDP for all streams. v2: - Rebase on upstream include "intel_vdsc.h" change. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231107001505.3370108-3-imre.deak@intel.com
2023-11-06drm/i915: Extract hsw_chicken_trans_reg()Ville Syrjälä
We have the same code to determine the CHICKEN_TRANS register offset sprinkled in a dozen places. Hoover it up into a small helper. TODO: find a better home for this Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231101114212.9345-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-10-31drm/i915/hdcp: Convert intel_hdcp_enable to a blanket functionSuraj Kandpal
Let's convert intel_hdcp_enable to a blanket function which just has some conditions which needs to be checked before connectors enable hdcp. This cleans up code and avoids code duplication. --v3 -Keep function name as intel_hdcp_enable() [Jani] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231026121139.987437-3-suraj.kandpal@intel.com
2023-10-29drm/i915/display: Abstract C10/C20 pll calculationLucas De Marchi
As done with the hw readout, properly abstract the C10/C20 phy details inside intel_cx0_phy.c. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231018222831.4132968-3-lucas.demarchi@intel.com
2023-10-29drm/i915/display: Abstract C10/C20 pll hw readoutLucas De Marchi
intel_cx0_phy.[ch] should contain the details about C10/C20, not leaking it to the rest of the driver. Start abstracting this by exporting a single PLL hw readout that handles the differences between C20 and C10 internally to that compilation unit. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231018222831.4132968-2-lucas.demarchi@intel.com
2023-10-07drm/i915/ddi: Remove redundant intel_connector NULL checkSuraj Kandpal
Remove redundant intel_connector NULL check. Having it here just creates further confusion and also the variable already gets dereferenced before the aforementioned NULL check Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231006072830.581487-1-suraj.kandpal@intel.com
2023-09-15drm/i915/hdmi: Use connector->ddc everwhereVille Syrjälä
We already populate connector->ddc for HDMI ports, but so far we've not taken full advantage of it. Do that by eliminating a bunch of intel_gmbus_get_adapter() lookups. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-10-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-09-15drm/i915: Call the DDC bus i2c adapter "ddc"Ville Syrjälä
Rename the various names we've used for the DDC bus i2c adapter ("i2c", "adapter", etc.) to just "ddc". This differentiates it from the various other i2c busses we might have (DSI panel stuff, DVO control bus, etc.). v2: Don't add a bogus drm_get_edid() call (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230831104300.29688-1-ville.syrjala@linux.intel.com
2023-09-13drm/i915: Introduce crtc_state->enhanced_framingVille Syrjälä
Track DP enhanced framing properly in the crtc state instead of relying just on the cached DPCD everywhere, and hook it up into the state check and dump. v2: Actually set enhanced_framing in .compute_config() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230503113659.16305-1-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-13drm/i915: Stop spamming the logs with PLL stateVille Syrjälä
encoder->get_config() is not the place where the state should be dumped. Get rid of the spam. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-10-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-13drm/i915: Fix FEC state dumpVille Syrjälä
Stop dumping state while reading it out. We have a proper place for that stuff. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-7-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-13drm/i915/mst: Read out FEC stateVille Syrjälä
The MST codepath is missing FEC readout. Add it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230502143906.2401-4-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-09-06drm/i915: add trailing newlines to msgsJim Cromie
By at least strong convention, a print-buffer's trailing newline says "message complete, send it". The exception (no TNL, followed by a call to pr_cont) proves the general rule. Most DRM.debug calls already comport with this: 207 DRM_DEV_DEBUG, 1288 drm_dbg. Clean up the remainders, in maintainer sized chunks. No functional changes. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo changed subject while pushing] Link: https://patchwork.freedesktop.org/patch/msgid/20230903184607.272198-4-jim.cromie@gmail.com
2023-08-22drm/i915/display: remove redundant parameter from sdp split updateVinod Govindapillai
The needed functionality can be performed using crtc_state here. Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230818111950.128992-2-vinod.govindapillai@intel.com
2023-08-07drm/i915/jsl: s/JSL/JASPERLAKE for platform/subplatform definesDnyaneshwar Bhadane
Follow consistent naming convention. Replace JSL with JASPERLAKE. Unroll IS_JSL_EHL() define with IS_JASPERLAKE() || IS_ELKHARTLAKE() condition. Change in the display step define for Jasperlake. v2: - Change subject prefix skl instead of SKL(Anusha) v3: - Remove the use of define IS_JSL_EHL. - Replace with IS_JASPERLAKE() || IS_ELKHARTLAKE() - Unrolled wrapper IS_JSL_ELK_DISPLAY_STEP (Jani/Tvrtko) v4: - Removed unused macro v5: - Resolved valid checkpatch warning(Jani) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230801135344.3797924-9-dnyaneshwar.bhadane@intel.com
2023-07-06drm/i915: Try to initialize DDI/ICL+ DSI ports for every VBT child deviceVille Syrjälä
Try to deal with duplicate child devices for the same DDI port by attempting to initialize them in VBT defined order The first on to succeed for a specific DDI port will be the one we use. We'll also get rid of i915->display.vbt.ports[] here as any conflicts will now be handled at encoder registration time rather than during VBT parsing. Note that intel_bios_encoder_data_lookup() still remaims for pre-DDI DP/HDMI ports as those don't (at least yet) use VBT driven initialization. TODO: DSI dual link handling is sketchy at best v2: Leave intel_bios_encoder_port() to the encoder callback (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230630155846.29931-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-07-06drm/i915: Remove AUX CH sanitationVille Syrjälä
Stop with the VBT AUX CH sanitation, and instead just check that the appropriate AUX CH is still available when initializing a DP/TC port. The reason being that we want to start initializing ports in VBT order to deal with VBTs that declare child devices with seemingly conflicting ports. As the encoder initialization can fail for other reasons (at least for eDP+AUX) we can't know upfront which way the conflicts should be resolved. Note that the old way of sanitizing gave priority to the last port declared in the VBT, but now we sort of do the opposite by favoring the first encoder to successfully initialize. The reason for the old "last port wins" preference was eg. Asrock B250M-HDV where port A (eDP) and port E (DP->VGA) have an AUX CH conflict and we need to prefer port E. However with the new way port A (eDP) will be probed first, but will fail to probe due to HPD and thus port E will still win in the end. v2: Pimp the commit message (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230630155846.29931-5-ville.syrjala@linux.intel.com
2023-07-06drm/i915: Only populate aux_ch if really neededVille Syrjälä
Mixing VBT based AUX CH with platform defaults seems like a recipe for conflicts. Let's only populate AUX CH if we absolutely need it, that is only if we are dealing with a DP output or a TC port (which need it due to some power well shenanigans). TODO: double check that real VBTs do in fact populate the AUX CH for HDMI TC legacy ports... Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230630155846.29931-3-ville.syrjala@linux.intel.com
2023-07-06drm/i915: Initialize dig_port->aux_ch to NONE to be sureVille Syrjälä
Make sure dig_port->aux_ch is trustworthy by initializing it to NONE (-1) at the start. The encoder init will later fill in the actual value, if appropriate. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230630155846.29931-2-ville.syrjala@linux.intel.com
2023-06-20drm/i915: Convert HSW/BDW to use port_mask for DDI probeVille Syrjälä
Make HSW/BDW use port_mask for output probing as well. To achieve that the strap checks are moved into intel_ddi_init() itself. Or should we move them to the runtime port_mask init instead? Maybe not since the hardware is still there, just not connected to anything. v2: Account for DDI-E in strap detection Keep to the old CRT->DDI init order Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-8-ville.syrjala@linux.intel.com
2023-06-20drm/i915: Assert that the port being initialized is validVille Syrjälä
Sprinkle some asserts to catch any mishaps in the port_mask vs. output init. For DDI/DP/HDMI/SDVO I decided that we want to bail out for an invalid port since those are the encoder types where we might want consider driving the whole thing from the VBT child device list, and bogus VBTs could be a real issue (if for no other reason than the i915.vbt_firmware). For DVO and HSW/BDW CRT port I just threw the assert in there for good measure. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230616140820.11726-5-ville.syrjala@linux.intel.com
2023-06-07drm/i915/ddi: drop unused but set variable intel_dpJani Nikula
Prepare for re-enabling -Wunused-but-set-variable. The intel_dp variable has been unused since commit ef79fafe9dae ("drm/i915: Eliminate intel_dp.regs.dp_tp_{ctl,status}"). Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/66ca543b400a2048a6a84bb57a7bac8943014a96.1685119007.git.jani.nikula@intel.com
2023-06-02drm/i915/dp: stop caching has_hdmi_sink in struct intel_dpJani Nikula
Use the information stored in display info. Add intel_dp_has_hdmi_sink() helper to access it. v2: Rebased Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/748103fda572b3552e5bbdafb300d8508d4eeaf4.1685437500.git.jani.nikula@intel.com
2023-05-17Merge drm/drm-next into drm-intel-nextRodrigo Vivi
Backmerge to get some hwmon dependencies. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-05-16drm/i915/tc: Reset TypeC PHYs left enabled in DP-alt mode after the sink ↵Imre Deak
disconnects If the output on a DP-alt link with its sink disconnected is kept enabled for too long (about 20 sec), then some IOM/TCSS firmware timeout will cause havoc on the PCI bus, at least for other GFX devices on it which will stop powering up. Since user space is not guaranteed to do a disabling modeset in time, switch such disconnected but active links to TBT mode - which is without such shortcomings - with a 2 second delay. If the above condition is detected already during the driver load/system resume sanitization step disable the output instead, as at that point no user space or kernel client depends on a consistent output state yet and because subsequent atomic modeset on such connectors - without the actual sink capabilities available - can fail. An active/disconnected port as above will also block the HPD status of other active/disconnected ports to get updated (stuck in the connected state), until the former port is disabled, its PHY is disconnected and a ~10 ms delay has elapsed. This means the link state for all TypeC ports/CRTCs must be rechecked after a CRTC is disabled due to the above reason. For this disconnect the PHY synchronously after the CRTC/port is disabled and recheck all CRTCs for the above condition whenever such a port is disabled. To account for a race condition during driver loading where the sink is disconnected after the above sanitization step and before the HPD interrupts get enabled, do an explicit check/link reset if needed from the encoder's late_register hook, which is called after the HPD interrupts are enabled already. v2: - Handle an active/disconnected port blocking the HPD state update of another active/disconnected port. - Cancel the delayed work resetting the link also from the encoder enable/suspend/shutdown hooks. - Rebase on the earlier intel_modeset_lock_ctx_retry() addition, fixing here the missed atomic state reset in case of a retry. - Fix handling of an error return from intel_atomic_get_crtc_state(). - Recheck if the port needs to be reset after all the atomic state is locked and async commits are waited on. v3: - Add intel_crtc_needs_link_reset(), instead of open-coding it, keep intel_crtc_has_encoders(). (Ville) - Fix state dumping and use a bitmask to track disabled CRTCs in intel_sanitize_all_crtcs(). (Ville) - Set internal in intel_atomic_state right after allocating it. (Ville) - Recheck all CRTCs (not yet force-disabled) after a CRTC is force-disabled for any reason (not only due to a link state) in intel_sanitize_all_crtcs(). - Reduce delay after CRTC disabling to 20ms, and use the simpler msleep(). - Clarify code comment about HPD behaviour in intel_sanitize_all_crtcs(). - Move all the TC link reset logic to intel_tc.c . - Cancel the link reset work synchronously during system suspend, driver unload and shutdown. v4: - Rebased on previous patch, which allows calling the TC port suspend/cleanup handlers without modeset locks held; remove the display driver suspended assert from the link reset work accordingly. v5: (Ville) - Remove reset work canceling from intel_ddi_pre_pll_enable(). - Track a crtc vs. pipe mask in intel_sanitize_all_crtcs(). - Add reset_link_commit() to clarify the intel_modeset_lock_ctx_retry loop. Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5860 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512195513.2699-2-imre.deak@intel.com
2023-05-16drm/i915/tc: Call TypeC port flush_work/cleanup without modeset locks heldImre Deak
Call the TypeC port flush_work and cleanup handlers without the modeset locks held. These don't require the locks, as the work takes - as it should be able to at any point in time - any locks it needs and by the time cleanup is called and after cleanup returns the encoder is not in use. This is required by the next patch canceling a TypeC port work synchronously during encoder suspend and shutdown, where the work can take modeset locks as well, hence the canceling must be done without holding the locks. I also considered moving the modeset locking down to each encoder suspend()/shutdown() hook instead, however locking the full modeset state for each encoder separately would be odd, and the bigger change - affecting all encoders - is beyond the scope of this patchset. v2: - Add a TODO: comment to remove modeset locks if no encoder depends on this. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512195513.2699-1-imre.deak@intel.com
2023-05-16drm/i915: Factor out a helper for handling atomic modeset locks/stateImre Deak
This patch simplifying the handling of modeset locks and atomic state for an atomic commit is based on https://lore.kernel.org/all/20210715184954.7794-2-ville.syrjala@linux.intel.com/ adding the helper to i915. I find this approach preferrable than open-coding the corresponding steps (fixed for me an atomic state reset during a DEADLK retry, which I missed in the open-coded version) and also better than the existing DRM_MODESET_LOCK_ALL_BEGIN/END macros for the reasons described in the above original patchset. This change takes the helper into use only for atomic commits during DDI hotplug handling, as a preparation for a follow-up patch adding a similar commit started from the same spot. Other places doing a driver-internal atomic commit is to be converted by a follow-up patchset. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-13-imre.deak@intel.com
2023-05-16drm/i915/hdcp: add intel_atomic_state argument to hdcp_enable functionSuraj Kandpal
Pass all the parameter in intel_encoder->enable() to intel_hdcp_enable as we need intel_atomic_state later down to get acquire_ctx. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230515103225.688830-2-suraj.kandpal@intel.com
2023-05-05drm/i915: Move has_hdmi_sink out from intel_hdmi_compute_config()Ville Syrjälä
We'll be wanting to compute has_hdmi_sink a bit differently for some platforms. To that end compute it in the encoder .compute_config_hook() before we call intel_hdmi_compute_config(). intel_hdmi_compute_has_hdmi_sink() will do the basic lifting beyond any platform specific stuff. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-04-28drm/i915/mtl: Power up TCSSMika Kahola
Add register writes to enable powering up Type-C subsystem i.e. TCSS. For MeteorLake we need to request TCSS to power up and check the TCSS power state after 500 us. In addition, for PICA we need to set/clear the Type-C PHY ownnership bit when Type-C device is connected/disconnected. Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-11-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Readout Thunderbolt HW stateMika Kahola
Readout hw state for Thunderbolt. Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-9-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Enabling/disabling sequence Thunderbolt pllMika Kahola
Enabling and disabling sequence for Thunderbolt PLL. Bspec: 64568 v2: Use intel_de_wait_for_register() (RK) Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-8-mika.kahola@intel.com
2023-04-28drm/i915/mtl: C20 port clock calculationMika Kahola
Calculate port clock with C20 phy. BSpec: 64568 Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-5-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Dump C20 pll hw stateMika Kahola
As we already do with C10 chip, let's dump the pll hw state for C20 as well. Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-4-mika.kahola@intel.com
2023-04-28drm/i915/mtl: C20 HW readoutMika Kahola
Create a table for C20 DP1.4, DP2.0 and HDMI2.1 rates. The PLL settings are based on table, not for algorithmic alternative. For DP 1.4 only MPLLB is in use. Once register settings are done, we read back C20 HW state. BSpec: 64568 v2: Updated pll tables (RK) MPLLB selection fix (RK) Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-3-mika.kahola@intel.com
2023-04-28drm/i915/mtl: C20 PLL programmingMika Kahola
C20 phy PLL programming sequence for DP, DP2.0, HDMI2.x non-FRL and HDMI2.x FRL. This enables C20 MPLLA and MPLLB programming sequence. add 4 lane support for c20. v2: Add 6.48Gbps and 6.75Gbps modes for eDP (RK) Fix lane check (RK) Fix multiline commenting (Arun) use usleep_range() instead of msleep() (Andi) Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-2-mika.kahola@intel.com
2023-04-19drm/i915/dp_mst: Fix active port PLL selection for secondary MST streamsImre Deak
The port PLL selection needs to be up-to-date in the CRTC state of both the primary and all secondary MST streams. The commit removing the encoder update_prepare/complete hooks (see Fixes: below), stopped doing this for secondary streams, fix this up. Fixes: 0f752b2178c9 ("drm/i915: Remove the encoder update_prepare()/complete() hooks") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8336 Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230414173800.590790-1-imre.deak@intel.com (cherry picked from commit 27ac123b454417ea92d77c13a5d94655f53b759c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2023-04-19drm/i915/dp_mst: Fix active port PLL selection for secondary MST streamsImre Deak
The port PLL selection needs to be up-to-date in the CRTC state of both the primary and all secondary MST streams. The commit removing the encoder update_prepare/complete hooks (see Fixes: below), stopped doing this for secondary streams, fix this up. Fixes: 0f752b2178c9 ("drm/i915: Remove the encoder update_prepare()/complete() hooks") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8336 Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230414173800.590790-1-imre.deak@intel.com
2023-04-14drm/i915/display/mtl: Fill port width in ↵Ankit Nautiyal
DDI_BUF_/TRANS_DDI_FUNC_/PORT_BUF_CTL for HDMI MTL requires the PORT_CTL_WIDTH, TRANS_DDI_FUNC_CTL and DDI_BUF_CTL to be filled with 4 lanes for TMDS mode. This patch enables D2D link and fills PORT_WIDTH in appropriate registers. v2: - Added fixes from Clint's Add HDMI implementation changes. - Modified commit message. v3: - Use TRANS_DDI_PORT_WIDTH() instead of DDI_PORT_WIDTH() for the value of TRANS_DDI_FUNC_CTL_*. (Gustavo) Cc: Taylor, Clinton A <clinton.a.taylor@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-9-radhakrishna.sripada@intel.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-21 02:49:09 +0000