summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_display.c
AgeCommit message (Collapse)Author
2023-05-15drm/i915/display: add i915 parameter to I915_STATE_WARN()Jani Nikula
Add i915 parameter to I915_STATE_WARN() and use device based logging. Done using cocci + hand edited where there was no i915 local variable ready. v2: avoid null deref in verify_connector_state() Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com
2023-05-05drm/i915/display: Add new member to configure PCON color conversionAnkit Nautiyal
The decision to use DFP output format conversion capabilities should be during compute_config phase. This patch adds new member to crtc_state to represent the final output_format to the sink. In case of a DFP this can be different than the output_format, as per the format conversion done via the PCON. This will help to store only the format conversion capabilities of the DP device in intel_dp->dfp, and use crtc_state to compute and store the configuration for color/format conversion for a given mode. v2: modified the new member to crtc_state to represent the final output_format that eaches the sink, after possible conversion by PCON kind of devices. (Ville) v3: Addressed comments from Ville: -Added comments to clarify difference between sink_format and output_format. -Corrected the order of setting sink_format and output_format. -Added readout for sink_format in get_pipe_config hooks. v4: Set sink_format for intel_sdvo too. (Ville) v5: Rebased. v6: Fixed condition to go for YCbCr420 format for dp and hdmi. (Ville) v7: Fix the condition to set sink_format for HDMI. Set hdmi output_format simply as sink_format. (Ville) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230427125605.487769-2-ankit.k.nautiyal@intel.com
2023-05-04drm/i915: Define bitmasks for ilk pfit window pos/sizeVille Syrjälä
Define and use the bitmasks for the x/y components of the ilk+ panel filter window pos/size registers. Note that we stick to the full 16 bit mask even though the actual hardware limits are lower (and somewhat platform dependent). BDW is actually limited to 13 bits horizontal and 12 bits vertical, with the high bits being hardwired to zero. HSW should have the same limits as BDW. And pre-HSW should be limited to 12bits in both directions as that's already the limit of the transcoder timing registers. Curiously on HSW and earlier platforms all 16 bits can actually be set, but presumably the hardware ignores the high bits. v2: Switch back to full 16bit masks since that's what we use transcoder timign regs and PIPESRC as well Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230426135019.7603-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-04-28drm/i915/mtl: Enable TC portsMika Kahola
Finally, we can enable TC ports for Meteorlake. Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-14-mika.kahola@intel.com
2023-04-28drm/i915/mtl: Power up TCSSMika Kahola
Add register writes to enable powering up Type-C subsystem i.e. TCSS. For MeteorLake we need to request TCSS to power up and check the TCSS power state after 500 us. In addition, for PICA we need to set/clear the Type-C PHY ownnership bit when Type-C device is connected/disconnected. Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230428095433.4109054-11-mika.kahola@intel.com
2023-04-20drm/i915: Drop a useless forward declararionVille Syrjälä
ilk_pfit_enable() is defined before the first use. No need for a forwared declaration. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-04-20drm/i915: Use REG_BIT() & co. for ilk+ pfit registersVille Syrjälä
Polish the ilk+ pfit registers with REG_BIT() & co., and also take the opportunity to unify the ivb/hsw vs. not checks in ilk_pfit_enable() and ilk_get_pfit_config(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-04-20drm/i915: Use REG_BIT() & co for the pre-ilk pfit registersVille Syrjälä
Modernize the gmch pfit register definitions using REG_BIT/etc. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-04-20drm/i915: Relocate skl_get_pfit_config()Ville Syrjälä
Move skl_get_pfit_config() next to the other skl+ scaler code and rename it to skl_scaler_get_config() so that it has a consistnet namespace. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-04-20drm/i915/display: split out load detect to a separate fileJani Nikula
Load detect is shared between tv and crt but otherwise isolated in intel_display.c. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230417153741.1074692-1-jani.nikula@intel.com
2023-04-17drm/i915/display: add intel_display_driver_early_probe()Jani Nikula
Add intel_display_driver_early_probe() as the early probe call to replace intel_init_display_hooks(). The latter will be "demoted" to setting up hooks in intel_display.c only. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0b02311e5343527b501b44671d2188f2a1b30a7d.1681465222.git.jani.nikula@intel.com
2023-04-17drm/i915/display: move display suspend/resume to intel_display_driver.[ch]Jani Nikula
High level display functionality only called from driver top level code. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/11fdd82437370d8f341cd546d546de5e934c000f.1681465222.git.jani.nikula@intel.com
2023-04-17drm/i915/display: add intel_display_reset.[ch]Jani Nikula
Split out the display reset functionality to a separate file to declutter intel_display.c. Rename the functions accordingly. The minor downside is having to expose __intel_display_resume(). Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5e98e2fc5f0c09490e02d22250c8201342852288.1681465222.git.jani.nikula@intel.com
2023-04-17drm/i915/display: rename intel_display_driver_* functionsJani Nikula
Follow the usual naming conventions. v2: - Also rename references in comments (Gustavo) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6ff7b76018bf4cf611037d7bf027c975cddfe2af.1681465222.git.jani.nikula@intel.com
2023-04-17drm/i915/display: move modeset probe/remove functions to intel_display_driver.cJani Nikula
High level display functionality only called from driver top level code. v2: - Remove unnecessary declarations for intel_sanitize_watermarks() and intel_atomic_check() (Gustavo) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c00df5cfc233520bc28dd972296197a8a619a6a0.1681465222.git.jani.nikula@intel.com
2023-04-17drm/i915/display: move intel_modeset_probe_defer() to intel_display_driver.[ch]Jani Nikula
High level display functionality only called from driver top level code. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/831ed4d0356b51526704269038a6d2d72739e779.1681465222.git.jani.nikula@intel.com
2023-04-17drm/i915/display: start high level display driver fileJani Nikula
The only way to truly clean up intel_display.[ch] is to move stuff out of them until there's absolutely nothing left. Start moving the high level display driver entry points, i.e. functions called from top level driver code only, to a new file, which we'll call intel_display_driver.c. The intention is that there's no low-level display code or details here. This is an in-between layer. Initially, move intel_display_driver_register() and intel_display_driver_unregister() there. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e42cc037881a4c6042948a34bd4a9698f9e8487c.1681465222.git.jani.nikula@intel.com
2023-04-17drm/i915/display: remove intel_display_commit_duplicated_state()Jani Nikula
This seems like an unnecessary wrapper layer. Removing it will be helpful later. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a38f08e259221d71314ce6d764431147b0fba218.1681465222.git.jani.nikula@intel.com
2023-04-14drm/i915: Make intel_get_crtc_new_encoder() less oopsyVille Syrjälä
The point of the WARN was to print something, not oops straight up. Currently that is precisely what happens if we can't find the connector for the crtc in the atomic state. Get the dev pointer from the atomic state instead of the potentially NULL encoder to avoid that. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413200602.6037-2-ville.syrjala@linux.intel.com Fixes: 3a47ae201e07 ("drm/i915/display: Make WARN* drm specific where encoder ptr is available") Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-04-14drm/i915/mtl: Initial DDI port setupClint Taylor
Initialization sequences and C10 phy are in place to be able to enable the first 2 ports of MTL. The other ports use C20 phy that still need to be properly added. Enable the first ports for now, keeping a TODO comment about the others. Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413212443.1504245-10-radhakrishna.sripada@intel.com
2023-04-13drm/i915: Flag purely internal commits to not clear crtc_state->inheritedVille Syrjälä
If we have to force the hardware to go through a full modeset due to eg. cdclk reprogramming, we need to preserve crtc_state->inherited for all crtcs that have not otherwise gone through the whole compute_config() stuff after connectors have been detected. Otherwise eg. cdclk induced modeset glk_force_audio_cdclk() will clear the inherited flag, and thus the first real commit coming from userspace later on will not be forced through the full .compute_config() path and so eg. audio state may not get properly recomputed. But instead of adding all kinds of ad-hoc crtc_state->inherited preservation hacks all over, let's change things so that we only clear it for the crtcs directly included in userspace/client initiated commits. Should be far less fragile since now we just need to remember to flag the internal commits, and not worry about where new crtcs might get pulled in. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5260 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230328122357.1697-1-ville.syrjala@linux.intel.com Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
2023-04-12drm/i915/vrr: Allow VRR to be toggled during fastsetsVille Syrjälä
Now that VRR enable/disable are called from convenient places it is trivial to allow it to change state during fastsets. Make it so. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7542 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320203352.19515-7-ville.syrjala@linux.intel.com Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-04-12drm/i915/vrr: Relocate VRR enable/disableVille Syrjälä
Move VRR enabling/disabling into a place where it also works for fastsets. With this we always start the transcoder up in non-VRR mode. Granted we already did that but for a very short period of time. But now that we might end up doing a bit more with the transcoder in non-VRR mode it seems prudent to also update the active timings as the transcoder changes its operating mode. crtc_state->vrr.enable still tracks whether VRR is actually enabled or not, but now we configure all the other VRR timing registers whenever VRR is possible (whether we actually enable it or not). crtc_state->vrr.flipline can now serve as our "is VRR possible" bit of state. I decided to leave the MSA timing ignore bit set all the time whether VRR is actually enabled or not. If the sink can figure out the timings with that information when VRR is active then surely it can also do it when VRR is inactive. v2: Protect intel_vrr_set_transcoder_timings() with HAS_VRR() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230321135615.27338-1-ville.syrjala@linux.intel.com Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-04-12drm/i915/vrr: Tell intel_crtc_update_active_timings() about VRR explicitlyVille Syrjälä
In order to move VRR enable/disable to a place where it's also applicable to fastsets we need to be prepared to configure the pipe into non-VRR mode initially, and then later switch to VRR mode. To that end allow the active timings to be configured in non-VRR mode temporarily even when the crtc_state says we're going to be using VRR. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320203352.19515-5-ville.syrjala@linux.intel.com Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-04-12drm/i915/vrr: Eliminate redundant function argumentsVille Syrjälä
Some of the VRR functions take redundant arguments. Get rid of them to make life simpler. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320203352.19515-3-ville.syrjala@linux.intel.com Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-04-12drm/i915: Generalize planes_{enabling,disabling}()Ville Syrjälä
I want to use the same logic that planes_{enabling,disabling}() are using for other features as well. Generlize the thing into a pair of macros. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320203352.19515-2-ville.syrjala@linux.intel.com Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
2023-04-11drm/i915: Hook up csc into state checkerVille Syrjälä
Have the state checker validate that the csc matrices look correct when read back from the hardware. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230329135002.3096-12-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2023-04-11drm/i915: Add hardware csc readout for ilk+Ville Syrjälä
Read out the pipe/output csc matrices on ilk+ and stash the results (in the hardware specific format) into the appropriate place in the crtc state. Note that on skl/glk/icl the pipe csc unit suffers from an issue where *reads* of the coefficient/offset registers also disarm the double buffer update (if currently armed via CSC_MODE write). So it's rather important that the readout only happens after the csc registers have been latched. Fortunately the state checker only runs after the start of vblank where the latching happens. And on skl/glk the DMC + CSC register read has the potential to corrupt the latched CSC register values, so let's add a comment reminding us that the DC states should remain off until the readout has been completed. TODO: maybe we could somehow check to make sure PSR has in fact latched the new register values already, and that DC states have been off all along? Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230329135002.3096-9-ville.syrjala@linux.intel.com Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
2023-04-05drm/i915: rename intel_pm.[ch] to intel_clock_gating.[ch]Jani Nikula
Observe that intel_pm.[ch] is now purely about clock gating, so rename them to intel_clock_gating.[ch]. Rename the functions to intel_clock_gating_*() to follow coding conventions. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403122428.3526263-1-jani.nikula@intel.com
2023-04-03drm/i915: Remove the encoder update_prepare()/complete() hooksImre Deak
The encoder update_prepare()/complete() hooks were added to hold a TC port link reference for all outputs in the atomic state around the whole modeset enable sequence - thus locking the ports' TC mode - and set the TBT/DP-alt PLL type corresponding to the current TC mode. Since nothing depends on the PLL selection before/after then encoder's pre_pll_enable/post_pll_disable hooks are called, the above steps can be moved to these hooks, so do that and remove the update_prepare()/complete() hooks. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-30-imre.deak@intel.com
2023-04-03drm/i915: Disable DPLLs before disconnecting the TC PHYImre Deak
Bspec requires disabling the DPLLs on TC ports before disconnecting the port's PHY. Add a post_pll_disable encoder hook and move the call to disconnect the port's PHY from the post_disable hook to the new hook. Reviewed-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-28-imre.deak@intel.com
2023-04-03drm/i915: Move shared DPLL disabling into CRTC disable hookImre Deak
The spec requires disabling the PLL on TC ports before disconnecting the port's PHY. Prepare for that by moving the PLL disabling to the CRTC disable hook, while disconnecting the PHY will be moved to the post_pll_disable() encoder hook in the next patch. v2: Move the call from intel_crtc_disable_noatomic() as well. Reviewed-by: Mika Kahola <mika.kahola@intel.com> # v1 Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323142035.1432621-27-imre.deak@intel.com
2023-03-28Merge drm/drm-next into drm-intel-nextRodrigo Vivi
Catch up with 6.3-rc cycle... Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2023-03-24drm/i915/dpt: Add a modparam to disable DPT via the chicken bitVille Syrjälä
Add i915.enable_dpt modparam to allow disabling the DPT usage in hardware via the chicken bit. Useful when debugging potential DPT issues. Quickly smoke tested on ADL. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-6-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2023-03-24Merge tag 'drm-intel-next-2023-03-23' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-next Core Changes: - drm: Add SDP Error Detection Configuration Register (Arun) Driver Changes: - Meteor Lake enabling and fixes (RK, Jose, Madhumitha) - Lock the fbdev obj before vma pin (Tejas) - DSC fixes (Stanislav) - Fixes and clean-up on opregion code (Imre) - More wm/vblank stuff (Ville) - More general display code organization (Jani) - DP Fixes (Stanislav, Ville) - Introduce flags to ignore long HPD and link training issues \ for handling spurious issues on CI (Vinod) - Plane cleanups and extra registers (Ville) - Update audio keepalive clock values (Clint) - Rename find_section to bdb_find_section (Maarten) - DP SDP CRC16 for 128b132b link layer (Arun) - Fix various issues with noarm register writes (Ville) - Fix a few TypeC / MST issues (Imre) - Create GSC submission targeting HDCP and PXP usages on MTL+ (Suraj) - Enable HDCP2.x via GSC CS (Suraj) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZBy56qc9C00tCLOY@intel.com
2023-03-21drm/i915: Disable DC states for all commitsVille Syrjälä
Keeping DC states enabled is incompatible with the _noarm()/_arm() split we use for writing pipe/plane registers. When DC5 and PSR are enabled, all pipe/plane registers effectively become self-arming on account of DC5 exit arming the update, and PSR exit latching it. What probably saves us most of the time is that (with PIPE_MISC[21]=0) all pipe register writes themselves trigger PSR exit, and then we don't re-enter PSR until the idle frame count has elapsed. So it may be that the PSR exit happens already before we've updated the state too much. Also the PSR1 panel (at least on this KBL) seems to discard the first frame we trasmit, presumably still scanning out from its internal framebuffer at that point. So only the second frame we transmit is actually visible. But I suppose that could also be panel specific behaviour. I haven't checked out how other PSR panels behave, nor did I bother to check what the eDP spec has to say about this. And since this really is all about DC states, let's switch from the MODESET domain to the DC_OFF domain. Functionally they are 100% identical. We should probably remove the MODESET domain... And for good measure let's toss in an assert to the place where we do the _noarm() register writes to make sure DC states are in fact off. v2: Just use intel_display_power_is_enabled() (Imre) Cc: <stable@vger.kernel.org> #v5.17+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming") Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com
2023-03-21drm/i915: Add a .color_post_update() hookVille Syrjälä
We're going to need stuff after the color management register latching has happened. Add a corresponding hook. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2023-03-18drm/i915: Relocate intel_crtc_update_active_timings()Ville Syrjälä
Move intel_crtc_update_active_timings() into intel_vblank.c where it more properly belongs. Also do the s/dev_priv/i915/ modernization rename while at it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-3-ville.syrjala@linux.intel.com
2023-03-18drm/i915: Add belts and suspenders locking for seamless M/N changesVille Syrjälä
Add some (probably overkill) locking to protect the vblank timestamping constants updates during seamless M/N fastsets. As everything should be naturally aligned I think the individual pieces should probably end up updating atomically enough. So this is only really meant to guarantee everyone sees a consistent whole. All the drm_vblank.c usage is covered by vblank_time_lock, and uncore.lock will take care of __intel_get_crtc_scanline() that can also be called from outside the core vblank functionality. Currently only crtc_clock and framedur_ns can change, but in the future might fastset also across eg. vtotal/vblank_end changes, so let's just grab the locks across the whole thing. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-2-ville.syrjala@linux.intel.com
2023-03-17drm/i915: Relocate intel_plane_check_src_coordinates()Ville Syrjälä
Move intel_plane_check_src_coordinates() from the pre-skl sprite plane specific code to a more suitable place for common plane code. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314130255.23273-9-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2023-03-17drm/i915: Program VLV/CHV PIPE_MSA_MISC registerVille Syrjälä
VLV/CHV have an extra register to configure some stereo3d signalling details via DP MSA. Make sure we reset that register to zero (since we don't do any stereo3d stuff). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314130255.23273-5-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2023-03-17drm/i915: s/PIPEMISC/PIPE_MISC/Ville Syrjälä
This PIPEMISC vs. PIPE_MISC inconsitency is ugly. Unify the naming (PIPE_MISC is also what bspec has always called it). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314130255.23273-3-ville.syrjala@linux.intel.com Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
2023-03-15Merge tag 'drm-intel-next-2023-03-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: - MEI patches to fix suspend/resume issues with the i915's PXP. (Alexander) Driver Changes: - Registers helpers and clean-ups. (Lucas) - PXP fixes and clean-ups. (Alan, Alexander) - CDCLK related fixes and w/a (Chaitanya, Stanislav) - Move display code to use RMW whenever possible (Andrzej) - PSR fixes (Jouni, Ville) - Implement async_flip mode per plane tracking (Andrzej) - Remove pre-production Workarounds (Matt) - HDMI related fixes (Ankit) - LVDS cleanup (Ville) - Watermark fixes and cleanups (Ville, Jani, Stanilav) - DMC code related fixes, cleanups and improvements (Jani) - Implement fb_dirty for PSR,FBC,DRRS fixes (Jouni) - Initial DSB improvements targeting LUTs loading (Ville) - HWMON related fixes (Ashutosh) - PCI ID updates (Jonathan, Matt Roper) - Fix leak in scatterlist (Matt Atwood) - Fix eDP+DSI dual panel systems (Ville) - Cast iomem to avoid sparese warnings (Jani) - Set default backlight controller index (Jani) - More MTL enabling (RK) - Conversion of display dev_priv towards i915 (Nirmoy) - Improvements in log/debug messages (Ville) - Increase slice_height for DP VDSC (Suraj) - VBT ports improvements (Ville) - Fix platforms without Display (Imre) - Other generic display code clean-ups (Ville, Jani, Rodrigo) - Add RPL-U sub platform (Chaitanya) - Add inverted backlight quirk for HP 14-r206nv (Mavroudis) - Transcoder timing improvements (Ville) - Track audio state per-transcoder (Ville) - Error/underrun interrupt fixes (Ville) - Update combo PHY init sequence (Matt Roper) - Get HDR DPCD refresh timeout (Ville) - Vblank improvements (Ville) - DSS fixes and cleanups (Jani) - PM code cleanup (Jani) - Split display parts related to RPS (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZAez4aekcob8fTeh@intel.com
2023-03-10drm/i915/opregion: Register display debugfs later, after initialization stepsImre Deak
Move the display debugfs registration later, after initializing steps for opregion/acpi/audio. These latter ones don't depend on the debugfs entries, OTOH some debugfs entries may depend on the initialized state. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230308162503.3219200-3-imre.deak@intel.com
2023-03-10drm/i915: Preserve crtc_state->inherited during state clearingVille Syrjälä
intel_crtc_prepare_cleared_state() is unintentionally losing the "inherited" flag. This will happen if intel_initial_commit() is forced to go through the full modeset calculations for whatever reason. Afterwards the first real commit from userspace will not get forced to the full modeset path, and thus eg. audio state may not get recomputed properly. So if the monitor was already enabled during boot audio will not work until userspace itself does an explicit full modeset. Cc: stable@vger.kernel.org Tested-by: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2023-03-06drm/i915/display: split out DSC and DSS registersJani Nikula
Relatively few places need the DSC and DSS register definitions. Move them to intel_vdsc_regs.h. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230301151949.1591501-1-jani.nikula@intel.com
2023-02-20drm/i915: Remove pointless register readVille Syrjälä
We just wrote the EDP transcoder's VTOTAL register a few lines earlier, so instead of reading it back out again let's just generate the same value for the transocder B/C register. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-13-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-02-20drm/i915: Sprinkle some FIXMEs about TGL+ DSI transcoder timing messVille Syrjälä
The DSI code has some local hacks to program TRANS_VBLANK on TGL+ (ICL DSI transcoders didn't have this register). That will not work when we need to start using the delayed vblank (for DSB purposes). Too lazy to figure out what the is going on there, so just sprinkle FIXMEs in the hopes someone else will spot them eventually. v2: Only TRANS_{HBLANK,SET_CONTEXT_LATENCY} still no not exist for DSI transcoders, only TRANS_VBLANK Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-12-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com>
2023-02-20drm/i915: Configure TRANS_SET_CONTEXT_LATENCY correctly on ADL+Ville Syrjälä
On TGL VBLANK.VBLANK_START was the mechanism by which we can delay the pipe's internal vblank in relation to the transcoder's vblank. On ADL+ that no longer does anything. Instead we must now use the new TRANS_SET_CONTEXT_LATENCY register. Program it accordingly. And since VBLANK.VBLANK_START is no longer used by the hardware on ADL+ let's just zero it out to make it stand out in register dumps. Seeing the zeroed value should hopefully remind people to check the other register instead. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-11-ville.syrjala@linux.intel.com Acked-by: Jani Nikula <jani.nikula@intel.com>
2023-02-17drm/i915: Define transcoder timing register bitmasksVille Syrjälä
Define the contents of the transcoder timing registers using REG_GENMASK() & co. For ease of maintenance let's just define the bitmasks with the full 16bit width (also used by the current hand rolled stuff) even though not all bits are actually used. None of the unsued bits have ever contained anything. Jani spotted that the CRT load detection code did use narrower bitmasks, so that is now going to change. But that is fine since any garbage in the high bits would have been caught by the state checker that always used the full 16bit masks. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230213225258.2127-10-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-27 21:09:33 +0000