summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_display.c
AgeCommit message (Collapse)Author
2021-03-29drm/i915: Make sure i915_ggtt_view is inited when creating an FBImre Deak
This probably doesn't cause an issue, since the code checks the view type dependent size of the views before comparing them, but let's follow the practice to bzero the whole struct when initializing it. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-5-imre.deak@intel.com
2021-03-29drm/i915: Fix rotation setup during plane HW readoutImre Deak
The HW plane state is cleared and inited after we store the rotation to it, so store it instead to the uapi state to match what we do with all other plane state until intel_plane_copy_uapi_to_hw_state() is called. Rotation for initial FBs is not supported atm, but let's still fix the plane state setup here. While at it remove the redundant intel_state->uapi.src/dst init, which will be done in intel_plane_copy_uapi_to_hw_state(). v2: Remove redundant intel_state->uapi.src/dst init. (Ville) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-2-imre.deak@intel.com
2021-03-29drm/i915: Stop adding planes to the commit needlesslyVille Syrjälä
The dbuf bandwidth calculations don't need the planes to be added to the state. Each plane's data rate has already been precalculated and stored in the crtc state, and that with the dbuf slice usage for each plane is all the dbuf bandwidth code needs to figure out what the minimum cdclk is. What we're trying to do here is make sure each plane recalculates its minimum cdclk (ie. plane->min_cdclk()) on those platforms where the number of active planes affects the result of said calculation. Nothing to do with any dbuf cdclk requirements. Not sure if we had stuff in slightly different order or what, but at least in the current scheme this is not necessary. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325004415.17432-2-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-03-24drm/i915: Remove I915_USER_PRIORITY_SHIFTChris Wilson
As we do not have any internal priority levels, the priority can be set directed from the user values. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210120121439.17600-2-chris@chris-wilson.co.uk Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-03-24drm/i915: Pass ww ctx to intel_pin_to_display_planeMaarten Lankhorst
Instead of multiple lockings, lock the object once, and perform the ww dance around attach_phys and pin_pages. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-23-maarten.lankhorst@linux.intel.com
2021-03-24drm/i915: Reject more ioctls for userptr, v2.Maarten Lankhorst
There are a couple of ioctl's related to tiling and cache placement, that make no sense for userptr, reject those: - i915_gem_set_tiling_ioctl() Tiling should always be linear for userptr. Changing placement will fail with -ENXIO. - i915_gem_set_caching_ioctl() Userptr memory should always be cached. Changing caching mode will fail with -ENXIO. - i915_gem_set_domain_ioctl() Still temporarily allowed to work as intended, it's used to check userptr validity. With the reworked userptr code, it will keep working for this usecase. This plus the previous changes have been tested against beignet by using its own unit tests, and intel-video-compute by using piglit's opencl tests. Changes since v1: - set_domain was apparently used in iris for checking userptr validity, keep it working as intended. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210323155059.628690-14-maarten.lankhorst@linux.intel.com
2021-03-23drm/i915/display: Simplify GLK display version testsMatt Roper
GLK has always been a bit of a special case since it reports INTEL_GEN() as 9, but has version 10 display IP. Now we can properly represent the display version as 10 and simplify the display generation tests throughout the display code. Aside from manually adding the version to the glk_info structure, the rest of this patch is generated with a Coccinelle semantic patch. Note that we also need to switch any code that matches gen10 today but *not* GLK to be CNL-specific: @@ expression dev_priv; @@ - DISPLAY_VER(dev_priv) > 9 + DISPLAY_VER(dev_priv) >= 10 @@ expression dev_priv, E; @@ ( - DISPLAY_VER(dev_priv) >= 10 && E + (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) && E | - DISPLAY_VER(dev_priv) >= 10 + DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) | - IS_DISPLAY_RANGE(dev_priv, 10, E) + IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_CANNONLAKE(dev_priv) ) @@ expression dev_priv, E, E2; @@ ( - (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 10) | - E || IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv) + E || IS_DISPLAY_VER(dev_priv, 10) | - (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 10) | - IS_GEMINILAKE(dev_priv) || E || IS_CANNONLAKE(dev_priv) + E || IS_DISPLAY_VER(dev_priv, 10) | - E || IS_GEMINILAKE(dev_priv) || E2 || IS_CANNONLAKE(dev_priv) + E || E2 || IS_DISPLAY_VER(dev_priv, 10) | - (IS_DISPLAY_VER(dev_priv, 10) || IS_GEMINILAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 10) | - (IS_GEMINILAKE(dev_priv) || IS_DISPLAY_VER(dev_priv, 10)) + IS_DISPLAY_VER(dev_priv, 10) ) @@ expression dev_priv; @@ - (IS_DISPLAY_VER(dev_priv, 9) && !IS_GEMINILAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 9) @@ expression dev_priv; @@ ( - !(DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10)) + DISPLAY_VER(dev_priv) < 10 | - (DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10)) + DISPLAY_VER(dev_priv) >= 10 ) @@ expression dev_priv, E; @@ - E || DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10) + E || DISPLAY_VER(dev_priv) >= 10 @@ expression dev_priv, E; @@ - (IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_DISPLAY_VER(dev_priv, 10)) + IS_DISPLAY_RANGE(dev_priv, 10, E) @@ expression dev_priv; @@ ( - DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) || IS_GEN9_LP(dev_priv) + DISPLAY_VER(dev_priv) >= 10 || IS_GEN9_LP(dev_priv) | - IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) + IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 10 ) @@ expression dev_priv, E; @@ - !(DISPLAY_VER(dev_priv) >= E) + DISPLAY_VER(dev_priv) < E v2: - Convert gen10 conditions that don't include GLK into CNL conditions. (Ville) v3: - Rework coccinelle rules so that "ver>=10" turns into "ver>=11||is_cnl." (Ville) v3.1: - Manually re-add the ".display.version = 10" to glk_info after regenerating patch via Coccinelle. v4: - Also apply cocci rules to intel_pm.c and i915_irq.c! (CI) Cc: Ville Syrjälä <ville.syrjala@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210322233840.4056851-1-matthew.d.roper@intel.com
2021-03-23drm/i915/display: Eliminate most usage of INTEL_GEN()Matt Roper
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN() in the display code to use DISPLAY_VER() comparisons instead. The following semantic patch was used: @@ expression dev_priv, E; @@ - INTEL_GEN(dev_priv) == E + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; @@ - INTEL_GEN(dev_priv) + DISPLAY_VER(dev_priv) @@ expression dev_priv; expression E; @@ - IS_GEN(dev_priv, E) + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; expression from, until; @@ - IS_GEN_RANGE(dev_priv, from, until) + IS_DISPLAY_RANGE(dev_priv, from, until) There are still some display-related uses of INTEL_GEN() in intel_pm.c (watermark code) and i915_irq.c. Those will be updated separately. v2: - Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
2021-03-23drm/i915/display: Convert gen5/gen6 tests to IS_IRONLAKE/IS_SANDYBRIDGEMatt Roper
ILK is the only platform that we consider "gen5" and SNB is the only platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then replace numeric platform tests for these two generations with direct platform tests with the following Coccinelle semantic patch: @@ expression dev_priv; @@ - IS_GEN(dev_priv, 5) + IS_IRONLAKE(dev_priv) @@ expression dev_priv; @@ - IS_GEN(dev_priv, 6) + IS_SANDYBRIDGE(dev_priv) @@ expression dev_priv; @@ - IS_GEN_RANGE(dev_priv, 5, 6) + IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv) This will simplify our upcoming patches which eliminate INTEL_GEN() usage in the display code. v2: - Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville) - Rebase + regenerate from semantic patch Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
2021-03-19drm/i915: Give g4x_{dp,hdmi}.c g4x_ namespaceVille Syrjälä
s/intel_/g4x_/ for the externally visible g4x_{dp,hdmi}.c functions. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-8-ville.syrjala@linux.intel.com
2021-03-19drm/i915: Introduce g4x_hdmi.cVille Syrjälä
Extract the g4x+ HDMI low level code to its own file, leaving intel_hdmi.c to deal with higher level issues. The infoframe support I decided to leave in intel_hdmi.c since I think we need to move that as a whole to its own file. It is after all used also for DP SDPs, so no longer HDMI specific. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-7-ville.syrjala@linux.intel.com
2021-03-19drm/i915: Introduce g4x_dp.cVille Syrjälä
Move the g4x+ DP code into a new file. This will leave mostly platform agnostic code in intel_dp.c. Well, the misplaced phy test stuff pretty much ruins that, but let's squint real hard for now. v2: Add comment exlaining which platforms are covered (Daniel) Leave intel_dp_unused_lane_mask() be since it is pretty generic Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161015.22070-6-ville.syrjala@linux.intel.com
2021-03-18Merge tag 'drm-intel-next-2021-03-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Highlights: - Alderlake S enabling, via topic branch (Aditya, Anusha, Caz, José, Lucas, Matt, Tejas) - Refactor display code to shrink intel_display.c etc. (Dave) - Support more gen 9 and Tigerlake PCH combinations (Lyude, Tejas) - Add eDP MSO support (Jani) Display: - Refactor to support multiple PSR instances (Gwan-gyeong) - Link training debug logging updates (Sean) - Updates to eDP fixed mode handling (Jani) - Disable PSR2 on JSL/EHL (Edmund) - Support DDR5 and LPDDR5 for bandwidth computation (Clint, José) - Update VBT DP max link rate table (Shawn) - Disable the QSES check for HDCP2.2 over MST (Juston) - PSR updates, refactoring, selective fetch (José, Gwan-gyeong) - Display init sequence refactoring (Lucas) - Limit LSPCON to gen 9 and 10 platforms (Ankit) - Fix DDI lane polarity per VBT info (Uma) - Fix HDMI vswing programming location in mode set (Ville) - Various display improvements and refactorings and cleanups (Ville) - Clean up DDI clock routing and readout (Ville) - Workaround async flip + VT-d corruption on HSW/BDW (Ville) - SAGV watermark fixes and cleanups (Ville) - Silence pipe tracepoint WARNs (Ville) Other: - Remove require_force_probe protection from RKL, may need to be revisited (Tejas) - Detect loss of MMIO access (Matt) - GVT display improvements - drm/i915: Disable runtime power management during shutdown (Imre) - Perf/OA updates (Umesh) - Remove references to struct drm_device.pdev, via topic branch (Thomas) - Backmerge (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87v99rnk1g.fsf@intel.com
2021-03-16Merge tag 'drm-misc-next-2021-03-03' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.13: UAPI Changes: Cross-subsystem Changes: Core Changes: - %p4cc printk format modifier - atomic: introduce drm_crtc_commit_wait, rework atomic plane state helpers to take the drm_commit_state structure - dma-buf: heaps rework to return a struct dma_buf - simple-kms: Add plate state helpers - ttm: debugfs support, removal of sysfs Driver Changes: - Convert drivers to shadow plane helpers - arc: Move to drm/tiny - ast: cursor plane reworks - gma500: Remove TTM and medfield support - mxsfb: imx8mm support - panfrost: MMU IRQ handling rework - qxl: rework to better handle resources deallocation, locking - sun4i: Add alpha properties for UI and VI layers - vc4: RPi4 CEC support - vmwgfx: doc cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210303100600.dgnkadonzuvfnu22@gilmour
2021-03-12drm/i915: s/plane_res_b/blocks/ etc.Ville Syrjälä
Rename a bunch of the skl+ watermark struct members to have sensible names. Avoids me having to think what plane_res_b/etc. means. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-7-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-03-11Merge drm/drm-next into drm-intel-nextJani Nikula
Sync up with upstream. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-03-08drm/i915: Extend icl_sanitize_encoder_pll_mapping() to all DDI platformsVille Syrjälä
Now that all the encoder clock stuff is uniformly abstracted for all hsw+ platforms, let's extend icl_sanitize_encoder_pll_mapping() to cover all of them. Not sure there is a particular benefit in doing so, but less special cases always makes me happy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-7-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-08drm/i915: Move DDI clock readout to encoder->get_config()Ville Syrjälä
Move the *_get_ddi_pll() stuff into the encodet->get_config() hook. There it neatly sits next to the matching .{enable,disable}_clock() functions. In order to avoid excessive boilerplate I changed the behaviour such that all platforms now do the readout via crtc_state->port_dpll[]. ICL+ TC is still a bit special due to TBTPLL not having a functional .get_freq(). Should probably change that by adopting the LCPLL approach, but that would require a fairly substantial rework of the DPLL ID handling. So leave it for later. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-5-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-08drm/i915: Use pipes instead crtc indices in PLL state trackingVille Syrjälä
All the other places we have use pipes instead of crtc indices when tracking resource usage. Life is easier when we do it the same way always, so switch the dpll mgr to using pipes as well. Looks like it was actually mixing these up in some cases so it would not even have worked correctly except when the device has a contiguous set of pipes starting from pipe A. Granted, that is the typical case but supposedly it may not always hold on modern hw. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-4-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-08drm/i915: Do intel_dpll_readout_hw_state() after encoder readoutVille Syrjälä
The clock readout for DDI encoders needs to moved into the encoders. To that end intel_dpll_readout_hw_state() needs to happen after the encoder readout as otherwise it can't correctly populate the PLL crtc_mask/active_mask bitmasks. v2: Populate DPLL ref clocks before the encoder->get_config() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210225161225.30746-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-05drm/i915: Move pipe enable/disable tracepoints to intel_crtc_vblank_{on,off}()Ville Syrjälä
On platforms/outputs without a working frame counter we rely on the vblank code to cook up the frame counter from the timestamps. That requires that vblank support is enabled. Thus we need to move the pipe enable/disable tracepoints to the other side of the drm_vblank_{on,off}() calls. There shouldn't really be much happening between these old and new call sites so the tracepoints should still provide reasonable data. The alternative would be to give up on having the frame counter values in the trace which would render the tracepoints more or less pointless. v2: Missed one case in intel_ddi_post_disable() Drop the now useless i915_trace.h includes Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210304170421.10901-2-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2021-03-04drm/i915/edp: enable eDP MSO during link trainingJani Nikula
If the source and sink support MSO, enable it during link training. v4: Divide DRRS pixel clock by link count before M/N calculation v3: Adjust timings, refer to splitter v2: Limit MSO to pipe A using ->pipe_mask Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2711 Cc: Nischal Varide <nischal.varide@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/66da48b4b3c5ccffaac7989097cd96d6c6af8243.1614682842.git.jani.nikula@intel.com
2021-03-04drm/i915/mso: add splitter state checkJani Nikula
For starters, we expect the state to be zero, as we don't enable MSO anywhere. v2: Refer to splitter. Cc: Nischal Varide <nischal.varide@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/459a332f3cdce941c57312150872559db68f88c1.1614682842.git.jani.nikula@intel.com
2021-03-04drm/i915/mso: add splitter state readout for platforms that support itJani Nikula
Add splitter configuration to crtc state, and read it where supported. Also add splitter state dumping. The stream splitter will be required for eDP MSO. v4: - Catch invalid splitter configuration (Uma) v3: - Convert segment timings to full panel timings. - Refer to splitter instead of mso in crtc state. - Dump splitter state. v2: Add warning for mso being enabled on pipes other than A. Cc: Nischal Varide <nischal.varide@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/95cbe1c9d45edf3e3ec252e49fb49055def98155.1614682842.git.jani.nikula@intel.com
2021-03-03drm/i915: Clean up verify_wm_state()Ville Syrjälä
Get rid of the nonsense cursor special case in verify_wm_state() by just iterating through all the planes. And let's use the canonical [PLANE:..] style in the debug prints while at it. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-8-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-03-03drm/i915: Check tgl+ SAGV watermarks properlyVille Syrjälä
We know which WM0 (normal vs. SAGV) we supposedly programmed into the hardware, so just check against that instead of accepting either watermark as valid. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-7-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-03-03drm/i915: Introduce SAGV transtion watermarkVille Syrjälä
Seems to me that if we calculate WM0 using the bumped up SAGV latency we need to calculate the transition watermark accordingly. Track it alongside the other watermarks. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-6-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-03-03drm/i915: Stuff SAGV watermark into a sub-structureVille Syrjälä
We'll want a SAGV transition watermark as well. Prepare for that by collecting SAGV wm0 into a sub-strcture. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210226153204.1270-5-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2021-03-03drm/i915: Readout conn_state->max_bpcVille Syrjälä
Populate conn_state->max_bpc with something sensible from the start. Otherwise it's possible that we get to compute_sink_pipe_bpp() with max_bpc==0. The specific scenario goes as follows: 1. Initial connector state allocated with max_bpc==0 2. Trigger a modeset on the crtc feeding the connector, without actually adding the connector to the commit 3. drm_atomic_connector_check() is skipped because the connector has not yet been added, hence conn_state->max_bpc retains its current value 4. drm_atomic_helper_check_modeset() -> drm_atomic_add_affected_connectors() -> the connector is now part of the commit 5. compute_baseline_pipe_bpp() -> MISSING_CASE(max_bpc==0) Note that pipe_bpp itself may not be populated on pre-g4x machines, in which case we just fall back to max_bpc==8 and let .compute_config() limit the resulting pipe_bpp further if necessary. Cc: Daniel Vetter <daniel@ffwll.ch> Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210216160035.4780-1-ville.syrjala@linux.intel.com Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-02-23drm/i915: Nuke INTEL_OUTPUT_FORMAT_INVALIDVille Syrjälä
We tend to use output_format!=RGB as a shorthand for YCbCr, but this fails if we have a disabled crtc where output_format==INVALID. We're now getting some fail from intel_color_check() when we have: hw.enable==false hw.ctm!=NULL output_format==INVALID Let's avoid that by throwing INTEL_OUTPUT_FORMAT_INVALID to the dumpster, and thus everything defaults to RGB when the crtc is disabled. This does beg the deeper question of how much of the state should we in fact be validating when hw/uapi.enable==false. And should we even be doing the uapi->hw copy when uapi.enable==false? So far I've not been able to come up with satisfactory answers for myself, so I'm putting it off for the moment. Cc: Lee Shawn C <shawn.c.lee@intel.com> Fixes: 0aa5c3835c8a ("drm/i915: support two CSC module on gen11 and later") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2964 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210205202322.27608-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 7e07c68f06a248441b485249de4c4115cba262cc) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-02-18drm/i915: Wait for scanout to stop when sanitizing planesVille Syrjälä
When we sanitize planes let's wait for the scanout to stop before we let the subsequent code tear down the ggtt mappings and whatnot. Cures an underrun on my ivb when I boot with VT-d enabled and the BIOS fb gets thrown out due to stolen being considered unusable with VT-d active. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210217162050.13803-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2021-02-18drm/i915: Nuke INTEL_OUTPUT_FORMAT_INVALIDVille Syrjälä
We tend to use output_format!=RGB as a shorthand for YCbCr, but this fails if we have a disabled crtc where output_format==INVALID. We're now getting some fail from intel_color_check() when we have: hw.enable==false hw.ctm!=NULL output_format==INVALID Let's avoid that by throwing INTEL_OUTPUT_FORMAT_INVALID to the dumpster, and thus everything defaults to RGB when the crtc is disabled. This does beg the deeper question of how much of the state should we in fact be validating when hw/uapi.enable==false. And should we even be doing the uapi->hw copy when uapi.enable==false? So far I've not been able to come up with satisfactory answers for myself, so I'm putting it off for the moment. Cc: Lee Shawn C <shawn.c.lee@intel.com> Fixes: 0aa5c3835c8a ("drm/i915: support two CSC module on gen11 and later") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2964 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210205202322.27608-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-02-17drm: Switch to %p4cc format modifierSakari Ailus
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a large number of temporary variables at the same time. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
2021-02-17drm/i915: Disallow plane x+w>stride on ilk+ with X-tilingVille Syrjälä
ilk+ planes get notably unhappy when the plane x+w exceeds the stride. This wasn't a problem previously because we always aligned SURF to the closest tile boundary so the x offset never got particularly large. But now with async flips we have to align to 256KiB instead and thus this becomes a real issue. On ilk/snb/ivb it looks like the accesses just wrap early to the next tile row when scanout goes past the SURF+n*stride boundary, hsw/bdw suffer more heavily and start to underrun constantly. i965/g4x appear to be immune. vlv/chv I've not yet checked. Let's borrow another trick from the skl+ code and search backwards for a better SURF offset in the hopes of getting the x offset below the limit. IIRC when I ran into a similar issue on skl years ago it was causing the hardware to fall over pretty hard as well. And let's be consistent and include i965/g4x in the check as well, just in case I just got super lucky somehow when I wasn't able to reproduce the issue. Not that it really matters since we still use 4k SURF alignment for i965/g4x anyway. Fixes: 6ede6b0616b2 ("drm/i915: Implement async flips for vlv/chv") Fixes: 4bb18054adc4 ("drm/i915: Implement async flip for ilk/snb") Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw") Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209021918.16234-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 59fb8218c8e5001f854e7d5fdb5fb135cba58102) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo also exported some functions from intel_display.c during backport]
2021-02-13drm/i915: move intel_init_audio_hooks inside displayLucas De Marchi
intel_init_audio_hooks() sets up hooks in the display struct and only makes sense when we have display. Move it inside intel_init_display_hooks() so it isn't called when we don't have display. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20210213042756.953007-4-lucas.demarchi@intel.com
2021-02-13drm/i915/display: move register functions to display/Lucas De Marchi
Now that all display-related functions are grouped in i915_driver_register(), move them to display/ so we reduce the amount of display calls from the rest of the driver. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20210213042756.953007-3-lucas.demarchi@intel.com
2021-02-12drm/i915/gen9_bc: Add W/A for missing STRAP config on TGP PCH + CML combosLyude Paul
Apparently the new gen9_bc platforms that Intel has introduced don't provide us with a STRAP config register to read from for initializing DDI B, C, and D detection. So, workaround this by hard-coding our strap config in intel_setup_outputs(). Changes since v4: * Split this into it's own commit Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> [originally from Tejas's work] Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209212832.1401815-5-lyude@redhat.com
2021-02-11drm/i915/display: fix comment on skl strapsLucas De Marchi
We are not checking for specific SKUs and feedback from HW team is that it may not work since it was supposed to be fixed by the same time straps stopped to be used. So, just update comment. v2: Instead of removing the check, just update the comment since feedback from HW team was that it actually may not work Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200625001120.22810-3-lucas.demarchi@intel.com
2021-02-08drm/i915: refactor skylake scaler code into new file.Dave Airlie
This moves the code from various places and consolidates it into one new file. v2: - rename skl_program_plane -> skl_program_plane_scaler (Ville) - also move skl_pfit_enable, and consequently make some skl_scaler_* functions static to skl_scaler.c (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2fa703ffc7b96a41c392fd5ebbd2e6e4ffb6fb05.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: migrate i9xx plane get configDave Airlie
Migrate this code out like the skylake code. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c003bd458a6bcc703e9e2fb05731fb7124012e8c.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: migrate pll enable/disable code to intel_dpll.[ch]Dave Airlie
This moves the older i9xx/vlv/chv enable/disable to dpll file. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7fa8c76b0f07f3ede9efd7c1f989f33fbc8c53a3.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: move is_ccs_modifier to an inlineDave Airlie
There is no need for this to be out of line. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bb73a151b7b780f927edeb7e121449446592805d.1612536383.git.jani.nikula@intel.com
2021-02-08drm/i915: migrate skl planes code new file (v5)Dave Airlie
Rework the plane init calls to do the gen test one level higher. Rework some of the plane helpers so they can live in new file, there is still some scope to clean up the plane/fb interactions later. v2: drop atomic code back, rename file to Ville suggestions, add header file. v3: move scaler bits back v4: drop wrong new includes (Ville) v5: integrate the ccs gen12 changes v6: fix unrelated code movement (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> [Jani: fixed up sparse warnings.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4e88a5c6b9ab3b93cc2b6c7d78c26ae86f6abbd0.1612536383.git.jani.nikula@intel.com
2021-02-05drm/i915/display: Support PSR Multiple InstancesGwan-gyeong Mun
It is a preliminary work for supporting multiple EDP PSR and DP PanelReplay. And it refactors singleton PSR to Multi Transcoder supportable PSR. And this moves and renames the i915_psr structure of drm_i915_private's to intel_dp's intel_psr structure. It also causes changes in PSR interrupt handling routine for supporting multiple transcoders. But it does not change the scenario and timing of enabling and disabling PSR. And it not support multiple pipes with a single transcoder PSR case yet. v2: Fix indentation and add comments v3: Remove Blank line v4: Rebased v5: Rebased and Addressed Anshuman's review comment. - Move calling of intel_psr_init() to intel_dp_init_connector() v6: Address Anshuman's review comments - Remove wrong comments and add comments for a limit of supporting of a single pipe PSR v7: Update intel_psr_compute_config() for supporting multiple transcoder PSR on BDW+ v8: Address Anshuman's review comments - Replace DRM_DEBUG_KMS with drm_dbg_kms() / DRM_WARN with drm_warn() v9: Fix commit message v10: Rebased v11: Address Jose's review comment. - Reorder calling order of intel_psr2_program_trans_man_trk_ctl(). - In order to reduce changes keep the old name for drm_i915_private. - Change restrictions of multiple instances of PSR. v12: Address Jose's review comment. - Change the calling of intel_psr2_program_trans_man_trk_ctl() into commit_pipe_config(). - Change a checking order of CAN_PSR() and connector_status to original on i915_psr_sink_status_show(). - Drop unneeded intel_dp_update_pipe() function. - In order to wait a specific encoder which belong to crtc_state on intel_psr_wait_for_idle(), add checking of encoder. - Add an whitespace to comments. v13: Rebased and Address Jose's review comment. - Add and use for_each_intel_psr_enabled_encoder() macro. - In order to use correct frontbuffer_bit for each pipe, fix intel_psr_invalidate() and intel_psr_flush(). - Remove redundant or unneeded codes. - Update comments. v14: Address Jose's review comment - Add and use for_each_intel_encoder_can_psr() macro and for_each_intel_encoder_mask_can_psr() macro. - Add source_support member variable into intel_psr structure. - Update CAN_PSR() macro that checks source_support. - Move encoder's PSR availity check to psr_init() from psr_compute_config(). - Remove redundant or unneeded codes. v15: Remove wrong mutex lock/unlock of PSR from intel_psr2_program_trans_man_trk_ctl() Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210204134015.419036-1-gwan-gyeong.mun@intel.com
2021-02-04Merge tag 'drm-intel-next-2021-01-29' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - WARN if plane src coords are too big (Ville) - Prevent double YUV range correction on HDR planes (Andres) - DP MST related Fixes (Sean, Imre) - More clean-up around DRAM detection code (Jose) - Actually async flips enable for all ilk+ platforms (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210129225328.GA1041349@intel.com
2021-02-02Merge tag 'topic/adl-s-enabling-2021-02-01-1' of ↵Jani Nikula
git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Driver Changes: - Add basic support for Alder Lake S, to be shared between drm-intel-next and drm-intel-gt-next Signed-off-by: Jani Nikula <jani.nikula@intel.com> # Conflicts: # drivers/gpu/drm/i915/i915_drv.h From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210202025620.2212559-1-lucas.demarchi@intel.com
2021-01-29drm/i915: Implement async flips for vlv/chvVille Syrjälä
Add support for async flips on vlv/chv. Unlike all the other platforms vlv/chv do not use the async flip bit in DSPCNTR and instead we select between async vs. sync flips based on the surface address register. The normal DSPSURF generates sync flips DSPADDR_VLV generates async flips. And as usual the interrupt bits are different from the other platforms. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-12-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Implement async flip for ilk/snbVille Syrjälä
Add support for async flips on ivb/hsw. Again no need for any workarounds and just have to deal with the interrupt bits being shuffled around a bit. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-11-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Implement async flip for ivb/hswVille Syrjälä
Add support for async flips on ivb/hsw. Unlike bdw+ we don't need any workarounds to disable async flips. Apart from that the only real difference from the bdw implementation is the location of the flip_done interrupt bits. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-10-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
2021-01-29drm/i915: Implement async flips for bdwVille Syrjälä
Implement async flip support for BDW. The implementation is similar to the skl+ code. And just like skl/bxt/glk bdw also needs the disable w/a, thus we need to plumb the desired state of the async flip all the way down to i9xx_plane_ctl_crtc(). According to the spec we do need to bump the surface alignment to 256KiB for this. Async flips require an X-tiled buffer so we don't have to worry about linear. Cc: Karthik B S <karthik.b.s@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111163711.12913-9-ville.syrjala@linux.intel.com Reviewed-by: Karthik B S <karthik.b.s@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-09-14 14:09:27 +0000