summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_display_debugfs.c
AgeCommit message (Collapse)Author
2024-09-03drm/i915/psr: convert intel_psr.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display shall replace struct drm_i915_private as the main display device data pointer type. Convert intel_psr.[ch] to struct intel_display. Some stragglers are left behind where needed. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4399b98b07019a8063adbec1043ff7eabb7c1080.1725012870.git.jani.nikula@intel.com
2024-08-23drm/i915/display: convert params to struct intel_displayJani Nikula
Going forward, struct intel_display shall replace struct drm_i915_private as the main display device data pointer type. Convert intel_display_params.[ch] and intel_display_debugfs_params.[ch] to struct intel_display. Some stragglers are left behind where needed. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3e5cc1744eaf4708b08303e3e7e194035d7941cc.1724342644.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-12drm/i915/bios: convert to struct intel_displayJani Nikula
Going forward, struct intel_display shall replace struct drm_i915_private as the main display device data pointer type. Convert intel_bios.[ch] to struct intel_display. Do one drive-by conversion of unnecessary hex usage to decimal. Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0d0261a53aff5f141b16b482222a5ffce78e176e.1723213547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-12drm/i915/opregion: convert to struct intel_displayJani Nikula
Going forward, struct intel_display shall replace struct drm_i915_private as the main display device data pointer type. Convert intel_opregion.[ch] to struct intel_display. v2: - Fix declarations for !CONFIG_ACPI (Imre, kernel test robot) - Pass encoder/connector directly to intel_display() (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/aef94503909bbbf95f0244dc382a4d4cd050b903.1723213547.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-08drm/i915: Replace double blank with single blank after commaAndi Shyti
Do not use double blanks, ", " in function parameters where it's not required by any alignment purpose. Replase it with a single blank, ", ". Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240807130516.491053-3-andi.shyti@linux.intel.com
2024-08-06drm/i915: Dump DSC state to dmesg and debugfs/i915_display_infoImre Deak
Dump the DSC state to dmesg during HW readout and state computation as well as the i915_display_info debugfs entry. v2: Rebase on the s/DRM_X16/FXP_Q4 change. Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240805150802.3568970-7-imre.deak@intel.com
2024-07-12drm/i915/fbc: Convert to intel_display, mostlyVille Syrjälä
Switch the FBC code over to intel_display from i915, as much as possible. This is the future direction so that the display code can be shared between i915 and xe more cleanly. Some of the platform checks and the stolen mem facing stiff still need i915 around though. v2: Drop some redundant to_i915() casts Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240705145254.3355-3-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-06-13drm/i915/dp: Add debugfs entries to force the link rate/lane countImre Deak
Add connector debugfs entries to force the link rate/lane count to be used by a link training afterwards. These settings will be clamped to the supported, i.e. the source's and sink's common rate/lane count. After forcing the link rate/lane count reset the link training parameters and for a non-auto setting disable reducing the link parameters via the fallback logic. The former one can be used after testing link training failure scenarios - via debugfs entries added later - to reset the reduced link parameters after the test. v2: - Add the entries from intel_dp_link_training.c (Jani) - Rename the entries to i915_dp_set_link_rate/lane_count. v3: (Ville) - Rename the entries/struct fields to force_link_rate/lane_count. - Lock connection_mutex only for the required intel_dp state. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240610164933.2947366-18-imre.deak@intel.com
2024-06-12drm/i915: Rename bigjoiner master/slave to bigjoiner primary/secondaryStanislav Lisovskiy
According to BSpec we now should call "master" pipes, "primary" pipes and "slave" pipes, should be "secondary" pipes. Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> [vsyrjala: Don't rename port sync stuff, catch a few more things] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240603112551.6481-3-stanislav.lisovskiy@intel.com
2024-06-12drm/i915: Rename all bigjoiner to joinerStanislav Lisovskiy
Lets unify both bigjoiner and ultrajoiner under simple "joiner" name, because in future we might have multiple configurations, involving multiple bigjoiners, ultrajoiner, however it is possible to use same api for handling both. v2: - Renamed back some bigjoiner specific parts for now(Ville) Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> [vsyrjala: Catch a few more cases] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240607075457.15700-1-stanislav.lisovskiy@intel.com
2024-06-07drm/i915: pass dev_priv explicitly to DSPFW3Jani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the DSPFW3 register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/856978ed413e537b7d46eed5e8d93bdfd7c80fc6.1717514638.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-31drm/i915/alpm: Add debugfs for LOBFAnimesh Manna
For validation purpose add debugfs for LOBF. v1: Initial version. v2: Add aux-wake/less info along with lobf status. [Jouni] Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240529200742.1694401-7-animesh.manna@intel.com
2024-04-17drm/i915: Use printer for the rest of PLL debugfs dumpVille Syrjälä
Since we now have the printer around for intel_dpll_dump_hw_state() use it for all the other PLL prints as well. Just to make the thing looks less crazy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17drm/i915: Replace hand rolled PLL state dump with intel_dpll_dump_hw_state()Ville Syrjälä
Just use intel_dpll_dump_hw_state() instead of hand rolling it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-10drm/i915/pps: move pps debugfs file to intel_pps.cJani Nikula
Continue with placing debugfs next to the implementation. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408094357.3085319-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-06drm/i915: Fix i915_display_info output when connectors are not activeVille Syrjälä
Currently intel_connector_info(), which prints the per-connector output for i915_display_info, just bails out early if the connector doesn't have a current encoder. That leads to very confusing output where some of your connected (and properly detected) outputs appear to have no enumerated modes. Get rid of the encoder stuff and just rely on the connector itself so that the output is always consistent. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240329012331.29281-1-ville.syrjala@linux.intel.com Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
2024-04-05drm/i915/display: Initialize capability variablesSuraj Kandpal
Initialize HDCP capability variables to false to avoid UBSAN warning in boolean value as some functions invoking this could return without filling the two capability values. --v2 -Fix Typo [Chaitanya] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240401030106.274787-2-suraj.kandpal@intel.com
2024-04-03drm/i915: Use debugfs_create_bool() for "i915_bigjoiner_force_enable"Ville Syrjälä
There is no reason to make this debugfs file for a simple boolean so complicated. Just use debugfs_create_bool(). Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240402135148.23011-8-ville.syrjala@linux.intel.com
2024-02-26drm/i915/hdcp: HDCP Capability for the downstream deviceSuraj Kandpal
Currently we are only checking capability of remote device and not immediate downstream device but during capability check we need are concerned with only the HDCP capability of downstream device. During i915_display_info reporting we need HDCP Capability for both the monitors and downstream branch device if any this patch adds that. --v2 -Use MST Hub HDCP version [Ankit] --v3 -Redefined how we seprate remote and direct read to make sure HDMI shim functions are not touched [Ankit] --v4 - Fix the conditions so that hdcp_info with remote_req true is sent only when encoder is mst [Ankit] --v5 -No need to have the MST Hub version in i915_hdcp_sink_capability[Ankit] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-9-suraj.kandpal@intel.com
2024-02-26drm/i915/hdcp: Rename hdcp capable functionsSuraj Kandpal
Rename hdcp_capable and hdcp_2_2_capable to hdcp_get_capability and hdcp_2_2_get_capability to properly reflect what these functions are doing. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240223081453.1576918-7-suraj.kandpal@intel.com
2024-02-13drm/i915: Add bigjoiner force enable option to debugfsStanislav Lisovskiy
For validation purposes, it might be useful to be able to force Bigjoiner mode, even if current dotclock/resolution do not require that. Lets add such to option to debugfs. v2: - Apparently intel_dp_need_bigjoiner can't be used, when debugfs entry is created so lets just check manually the DISPLAY_VER. v3: - Switch to intel_connector from drm_connector(Jani Nikula) - Remove redundant modeset lock(Jani Nikula) - Use kstrtobool_from_user for boolean value(Jani Nikula) v4: - Apply the changes to proper function(Jani Nikula) v5: - Removed unnecessary check from i915_bigjoiner_enable_show (Ville Syrjälä) - Added eDP connector check to intel_connector_debugfs_add (Ville Syrjälä) - Removed debug message in order to prevent dmesg flooding (Ville Syrjälä) v6: - Assume now always that m->private is intel_connector - Fixed other similar conflicts v7: - Move bigjoiner force option to intel_connector(Ville Syrjälä) - Use DEFINE_SHOW_STORE_ATTRIBUTE instead of defining fops manually.(Ville Syrjälä) v8: - Pass intel_connector to debugfs_create_file, instead of drm_connector. (Jani Nikula) Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212125011.66174-1-uma.shankar@intel.com
2024-01-16drm/i915/opregion: move i915_opregion debugfs to intel_opregion.cJani Nikula
All things about opregion should be placed in intel_opregion.c. Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c10103d2dd775edc1e9f93f09d0834480f880596.1704992868.git.jani.nikula@intel.com
2024-01-16drm/i915/bios: move i915_vbt debugfs to intel_bios.cJani Nikula
All things VBT should be placed in intel_bios.c. While at it, shove in a FIXME comment about VBT possibly originating from other places than opregion. Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5e14a9559b6916022b506e5eb8d943783dc627a2.1704992868.git.jani.nikula@intel.com
2023-12-08Merge tag 'drm-intel-next-2023-12-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Improve display debug msgs and other general clean-ups (Ville, Rahuul) - PSR fixes and improvements around selective fetch (Jouni, Ville) - Remove FBC restrictions for Xe2LPD displays (Vinod) - Skip some timing checks on BXT/GLK DSI transcoders (Ville) - DP MST Fixes (Ville) - Correct the input parameter on _intel_dsb_commit (heminhong) - Fix IP version of the display WAs (Bala) - DGFX uses direct VBT pin mapping (Clint) - Proper handling of bool on PIPE_CONF_CHECK macros (Jani) - Skip state verification with TBT-ALT mod (Mika Kahona) - General organization of display code for reusage with Xe (Jouni, Luca, Jani, Maarten) - Squelch a sparse warning (Jani) - Don't use "proxy" headers (Andy Shevchenko) - Use devm_gpiod_get() for all GPIOs (Hans) - Fix ADL+ tiled plane stride (Ville) - Use octal permissions in display debugfs (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZXIWG6bRYaUw0w6-@intel.com
2023-12-07drm/i915: use octal permissions in display debugfsJani Nikula
Octal permissions are preferred over the symbolics ones. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231205134143.2427661-3-jani.nikula@intel.com
2023-12-07drm/i915: pass struct intel_connector to connector debugfs fopsJani Nikula
Prefer struct intel_connector over struct drm_connector, and unify the declarations in the fops. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231205134143.2427661-2-jani.nikula@intel.com
2023-12-07drm/i915: use intel_connector in intel_connector_debugfs_add()Jani Nikula
Prefer struct intel_connector over struct drm_connector. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231205134143.2427661-1-jani.nikula@intel.com
2023-11-23Merge tag 'drm-intel-next-2023-11-23' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull for v6.8: Features and functionality: - Major DP MST improvements on bandwidth management, DSC (Imre, Stan, Ville) - DP panel replay enabling (Animesh, Jouni) - MTL C20 phy state verification (Mika) - MTL DP DSC fractional bpp support (Ankit, Vandita, Swati, Imre) - Audio fastset support (Ville) Refactoring and cleanups: - Use dma fence interfaces instead of i915_sw_fence (Jouni) - Separate gem and display code (Jouni, Juha-Pekka) - AUX register macro refactoring (Jani) - Separate display module/device parameters from the rest (Jouni) - Move display capabilities debugfs under display (Vinod) - Makefile cleanup (Jani) - Register cleanups (Ville) - Enginer iterator cleanups (Tvrtko) - Move display lock inits under display/ (Jani) - VLV/CHV DPIO PHY register and interface refactoring (Jani) - DSI VBT sequence refactoring (Jani, Andy Shevchenko) - C10/C20 PHY PLL hardware readout and calculation abstractions (Lucas) - DPLL code cleanups (Ville) - Cleanup PXP plane protection checks (Jani) Fixes: - Replace VLV/CHV DSI GPIO direct access with proper GPIO API usage (Andy Shevchenko) - Fix VLV/CHV DSI GPIO wrong initial value (Hans de Goede) - Fix UHBR data, link M/N/TU and PBN values (Imre) - Fix HDCP state on an enable/disable cycle (Suraj) - Fix DP MST modeset sequence to be according to spec (Ville) - Improved atomicity for multi-pipe commits (Ville) - Update URLs in i915 MAINTAINERS entry and code (Jani) - Check for VGA converter presence in eDP probe (Ville) - Fix surface size checks (Ville) - Fix LNL port/phy assignment (Lucas) - Reset C10/C20 message bus harder to avoid sporadic failures (Mika) - Fix bogus VBT HDMI level shift on BDW (Ville) - Add workaround for LNL underruns when enabling FBC (Vinod) - DSB refactoring (Animesh) - DPT refactoring (Juha-Pekka) - Disable DSC on DP MST on ICL (Imre) - Fix PSR VSC packet setup timing (Mika) - Fix LUT rounding and conversions (Ville) DRM core display changes: - DP MST fixes, helpers, refactoring to support bandwidth management (Imre) - DP MST PBN divider value refactoring and fixes (Imre) - DPCD register definitions (Ankit, Imre) - Add helper to get DSC bpp precision (Ankit) - Fix color LUT rounding (Ville) From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87v89sl2ao.fsf@intel.com [sima: Some conflicts in the amdgpu dp mst code] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-11-14drm/i915/dsc: Add debugfs entry to validate DSC fractional bppSwati Sharma
DSC_Sink_BPP_Precision entry is added to i915_dsc_fec_support_show to depict sink's precision. Also, new debugfs entry is created to enforce fractional bpp. If Force_DSC_Fractional_BPP_en is set then while iterating over output bpp with fractional step size we will continue if output_bpp is computed as integer. With this approach, we will be able to validate DSC with fractional bpp. v2: Add drm_modeset_unlock to new line(Suraj) Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20231110101020.4067342-8-ankit.k.nautiyal@intel.com
2023-10-26drm/i915/display: Add framework to add parameters specific to displayJouni Högander
Currently all module parameters are handled by i915_param.c/h. This is a problem for display parameters when Xe driver is used. Add a mechanism to add parameters specific to the display. This is mainly copied from i915_[debugfs]_params.[ch]. Parameters are not yet moved. This is done by subsequent patches. v2: - Drop unused predefinition (dentry) - Clarify need for empty INTEL_DISPLAY_PARAMS_FOR_EACH in comment Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-2-jouni.hogander@intel.com
2023-10-25drm/i915/display: debugfs entry to list display capabilitiesVinod Govindapillai
Create a separate debugfs entry to list the display capabilities IGT can rely on this debugfs entry for tests that depend on display device and display runtime info for both xe and i915 drivers. v2: rename the entry to i915_display_capabilities (Chaitanya) Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231018102723.16915-2-vinod.govindapillai@intel.com
2023-10-20Merge tag 'drm-intel-next-2023-10-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Add new DG2 PCI IDs (Shekhar) - Remove watchdog timers for PSR on Lunar Lake (Mika Kahola) - DSB changes for proper handling of LUT programming (Ville) - Store DSC DPCD capabilities in the connector (Imre) - Clean up zero initializers (Ville) - Remove Meteor Lake force_probe protection (RK) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZTFW4g6duLtp+Wy0@intel.com
2023-10-16drm/i915/dp: Use connector DSC DPCD in i915_dsc_fec_support_show()Imre Deak
Use the connector's DSC DPCD capabilities in i915_dsc_fec_support_show() instead of the version stored in the encoder. Atm the two are identical, but a follow-up patch will store the (MST) connector specific version in the connector. Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-6-imre.deak@intel.com
2023-10-16drm/i915/dp: Use i915/intel connector local variables in ↵Imre Deak
i915_dsc_fec_support_show() Cache the i915 specific device and connector pointers in i915_dsc_fec_support_show(). v2: - s/Cahce/Cache typo in commit log. (Stan) Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-5-imre.deak@intel.com
2023-10-16Merge tag 'drm-intel-next-2023-10-12' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull #2 for v6.7: Features and functionality: - Preparation for i915 display code reuse in upcoming Xe driver (Jani) - Drop the fastboot module parameter and use the platform defaults (Arun) - Enable new LNL FBC features (Vinod) - Add LNL display feature capability reads (Vinod) Refactoring and cleanups: - Locally enable W=1 warnings by default in i915 (Jani) - Move HDCP GSC message code to a separate file (Suraj) - GVT include cleanups (Jani) - Move more display init under display/ (Jani) - DPLL ID refactoring (Ville) - Better abstraction of GT0 (Jani) - Move VGA decode function to GMCH code (Uma) - Use local64_try_cmpxchg() to optimize PMU event read (Uros Bizjak) - Clean up FBC checks (Ville) - Constify and unify state checker calling conventions (Ville) - Add display step name helper (Chaitanya) Documentation: - Update CCS and GSC CS documentation (Rodrigo) - Fix a number of documentation typos (Randy Dunlap) Fixes: - VLV DSI fixes and quirks (Hans) - Fix crtc state memory leaks (Suraj) - Increase LSPCON mode settle timeout (Niko Tsirakis) - Stop clobbering old crtc state during state check (Ville) - Fix VLV color state readout (Ville) - Fix cx0 PHY pipe reset to allow S0iX (Khaled) - Ensure DP MST pbn_div is up-to-date after sink reconnect (Imre) - Drop an unnecessary NULL check to fix static analyzer warning (Suraj) - Use an explicit rather than implicit include for frontbuffer tracking (Jouni) Merges: - Backmerge drm-next to fix a conflict (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87r0m00xew.fsf@intel.com
2023-10-11Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Updating drm-misc-next to the state of Linux v6.6-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-10-05drm/dp: switch drm_dp_downstream_*() helpers to struct drm_edidJani Nikula
Prefer struct drm_edid where possible. With limited users for the drm_dp_downstream_*() helpers, this is fairly straightforward. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231004162149.2802113-1-jani.nikula@intel.com
2023-10-04drm/i915: Introduce for_each_shared_dpll()Ville Syrjälä
No one really cares how we store the shared_dplls. Currently it happens to be an array, but we could change that to a more flexible scheme at some point. Hide the implementation details behind an iterator macro. The slight downside is the pll variable moving out of the loop scope, but maybe someday soon we'll start to convert everything over to having declarations within for-statements... Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231003200620.11633-4-ville.syrjala@linux.intel.com
2023-10-04drm/i915: Stop requiring PLL index == PLL IDVille Syrjälä
There's no good reason to keep around this PLL index == PLL ID footgun. Get rid of it. Both i915->shared_dplls[] and state->shared_dpll[] are indexed by the same thing now, which is just the index we get at initialization from dpll_mgr->dpll_info[]. The rest is all about PLL IDs now. v2: Add pll->index to mimic drm_crtc & co. Remove the comment saying ID should match the index v3: s/i/pll->index/ in debugfs loop (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231003200620.11633-2-ville.syrjala@linux.intel.com
2023-08-24drm/i915/display: add lock while printing frontbuffer tracking bits to debugfsJuha-Pekka Heikkila
Add missing spin_lock/unlock Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230814163452.2925-1-juhapekka.heikkila@gmail.com
2023-07-25drm/i915: Simplify expression &to_i915(dev)->drmUwe Kleine-König
to_i915 is defined as container_of(dev, struct drm_i915_private, drm); So for a struct drm_device *dev, to_i915(dev)->drm is just dev. Simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230721212133.271118-1-u.kleine-koenig@pengutronix.de
2023-06-07drm/i915/debugfs: stop using edid_blob_ptrJani Nikula
Only the EDID code and sysfs should look at the EDID property. Stop using it. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230602132321.3199445-1-jani.nikula@intel.com
2023-06-02drm/i915/hdmi: stop caching has_audio in struct intel_hdmiJani Nikula
Use the information stored in display info. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/710286536d6b07ba8aa068b65b2b2c0c7743220e.1685437500.git.jani.nikula@intel.com
2023-06-02drm/i915/dp: stop caching has_audio in struct intel_dpJani Nikula
Use the information stored in display info. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/695bbe8b5ebee6e492f95a1c818da15691752dc8.1685437500.git.jani.nikula@intel.com
2023-06-02drm/display/dp_mst: drop has_audio from struct drm_dp_mst_portJani Nikula
Caching the has_audio in struct drm_dp_mst_port seems odd, and oddly placed. Defer audio handling to drivers, and use the info from the connector display info. i915 was the only one using it anyway. Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7d9eefdf150870479c5797f027d4c2b0a19ff583.1685437500.git.jani.nikula@intel.com
2023-04-20drm/i915: Relocate VBLANK_EVASION_TIME_USVille Syrjälä
Move the VBLANK_EVASION_TIME_US definition to a slightly better place. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-04-14drm/i915/debugfs: New debugfs for display clock frequenciesBhanuprakash Modem
Instead of mixing display & non-display stuff together, move display specific clock info to new debugfs. This patch will create a new debugfs "i915_cdclk_info" to expose Current & Max cdclk and Max pixel clock frequency info. Example: $ cat /sys/kernel/debug/dri/0/i915_cdclk_info Current CD clock frequency: 163200 kHz Max CD clock frequency: 652800 kHz Max pixel clock frequency: 1305600 kHz V2: - s/i915_display_clock_info/i915_cdclk_info/ (Jani) - Move the logic to intel_cdclk.c (Jani) - Don't remove info from i915_frequency_info (Jani) V3: - Drop locking (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230413114502.1105288-1-bhanuprakash.modem@intel.com
2023-04-04drm/i915/psr: split out PSR regs to a separate fileJani Nikula
Clean up i915_reg.h by splitting out PSR regs to display/intel_psr_regs.h. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331090949.2858951-2-jani.nikula@intel.com
2023-04-03drm/i915/display/intel_display_debugfs: Fix incorrect param naming for ↵Lee Jones
'intel_connector' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Function parameter or member 'intel_connector' not described in 'intel_connector_debugfs_add' drivers/gpu/drm/i915/display/intel_display_debugfs.c:1668: warning: Excess function parameter 'connector' description in 'intel_connector_debugfs_add' Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-5-lee@kernel.org
2023-04-03drm/i915/dsc: Add debugfs entry to validate DSC output formatsSwati Sharma
DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444). Also, new debugfs entry is created to enforce output format. This is required because of our driver policy. For ex. if a mode is supported in both RGB and YCbCr420 output formats by the sink, our policy is to try RGB first and fall back to YCbCr420, if mode cannot be shown using RGB. So, to test other output formats like YCbCr420 or YCbCr444, we need a debugfs entry (force_dsc_output_format) to force this output format. v2: -Func name changed to intel_output_format_name() (Jani N) -Return forced o/p format from intel_dp_output_format() (Jani N) v3: -output_format_str[] to remain static (Jani N) Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230309062855.393087-8-suraj.kandpal@intel.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-03 16:27:34 +0000