summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_dp_mst.c
AgeCommit message (Collapse)Author
2021-02-08drm/i915: refactor skylake scaler code into new file.Dave Airlie
This moves the code from various places and consolidates it into one new file. v2: - rename skl_program_plane -> skl_program_plane_scaler (Ville) - also move skl_pfit_enable, and consequently make some skl_scaler_* functions static to skl_scaler.c (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2fa703ffc7b96a41c392fd5ebbd2e6e4ffb6fb05.1612536383.git.jani.nikula@intel.com
2021-01-28drm/i915: Fix the MST PBN divider calculationImre Deak
Atm the driver will calculate a wrong MST timeslots/MTP (aka time unit) value for MST streams if the link parameters (link rate or lane count) are limited in a way independent of the sink capabilities (reported by DPCD). One example of such a limitation is when a MUX between the sink and source connects only a limited number of lanes to the display and connects the rest of the lanes to other peripherals (USB). Another issue is that atm MST core calculates the divider based on the backwards compatible DPCD (at address 0x0000) vs. the extended capability info (at address 0x2200). This can result in leaving some part of the MST BW unused (For instance in case of the WD19TB dock). Fix the above two issues by calculating the PBN divider value based on the rate and lane count link parameters that the driver uses for all other computation. Bugzilla: https://gitlab.freedesktop.org/drm/intel/-/issues/2977 Cc: Lyude Paul <lyude@redhat.com> Cc: Ville Syrjala <ville.syrjala@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjala <ville.syrjala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210125173636.1733812-2-imre.deak@intel.com
2021-01-19drm/dp: Revert "drm/dp: Introduce EDID-based quirks"Lyude Paul
This reverts commit 0883ce8146ed6074c76399f4e70dbed788582e12. Originally these quirks were added because of the issues with using the eDP backlight interfaces on certain laptop panels, which made it impossible to properly probe for DPCD backlight support without having a whitelist for panels that we know have working VESA backlight control interfaces over DPCD. As well, it should be noted it was impossible to use the normal sink OUI for recognizing these panels as none of them actually filled out their OUIs, hence needing to resort to checking EDIDs. At the time we weren't really sure why certain panels had issues with DPCD backlight controls, but we eventually figured out that there was a second interface that these problematic laptop panels actually did work with and advertise properly: Intel's proprietary backlight interface for HDR panels. So far the testing we've done hasn't brought any panels to light that advertise this interface and don't support it properly, which means we finally have a real solution to this problem. As a result, we now have no need for the force DPCD backlight quirk, and furthermore this also removes the need for any kind of EDID quirk checking in DRM. So, let's just revert it for now since we were the only driver using this. v3: * Rebase v2: * Fix indenting error picked up by checkpatch in intel_edp_init_connector() Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: thaytan@noraisin.net Cc: Vasily Khoruzhick <anarsoul@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210114221709.2261452-6-lyude@redhat.com
2021-01-13drm/i915/hdcp: Enable Gen12 HDCP 1.4 DP MST supportAnshuman Gupta
Enable HDCP 1.4 over DP MST for Gen12. v2: - Enable HDCP for <= Gen12 platforms. [Ram] v3: - Connector detials in debug msg. [Ram] Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Tested-by: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-10-anshuman.gupta@intel.com
2021-01-13drm/i915/hdcp: DP MST transcoder for link and streamAnshuman Gupta
Gen12 has H/W delta with respect to HDCP{1.x,2.x} display engine instances lies in Transcoder instead of DDI as in Gen11. This requires hdcp driver to use mst_master_transcoder for link authentication and stream transcoder for stream encryption separately. This will be used for both HDCP 1.4 and HDCP 2.2 over DP MST on Gen12. Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Tested-by: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210111081120.28417-6-anshuman.gupta@intel.com
2020-12-15Merge tag 'drm-misc-next-2020-11-27-1' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.11: UAPI Changes: Cross-subsystem Changes: * char/agp: Disable frontend without CONFIG_DRM_LEGACY * mm: Fix fput in mmap error path; Introduce vma_set_file() to change vma->vm_file Core Changes: * dma-buf: Use sgtables in system heap; Move heap helpers to CMA-heap code; Skip sync for unmapped buffers; Alloc higher order pages is available; Respect num_fences when initializing shared fence list * doc: Improvements around DRM modes and SCALING_FILTER * Pass full state to connector atomic functions + callee updates * Cleanups * shmem: Map pages with caching by default; Cleanups * ttm: Fix DMA32 for global page pool * fbdev: Cleanups * fb-helper: Update framebuffer after userspace writes; Unmap console buffer during shutdown; Rework damage handling of shadow framebuffer Driver Changes: * amdgpu: Multi-hop fixes, Clenaups * imx: Fix rotation for Vivante tiled formats; Support nearest-neighour skaling; Cleanups * mcde: Fix RGB formats; Support DPI output; Cleanups * meson: HDMI clock fixes * panel: Add driver and bindings for Innolux N125HCE-GN1 * panel/s6e63m0: More backlight levels; Fix init; Cleanups * via: Clenunps * virtio: Use fence ID for handling fences; Cleanups Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201127083055.GA29139@linux-uq9g
2020-11-20drm: Pass the full state to connectors atomic functionsMaxime Ripard
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Now that the CRTCs have been converted, let's move forward with the connectors to provide a consistent interface. The conversion was done using the coccinelle script below, and built tested on all the drivers. @@ identifier connector, connector_state; @@ struct drm_connector_helper_funcs { ... struct drm_encoder* (*atomic_best_encoder)(struct drm_connector *connector, - struct drm_connector_state *connector_state); + struct drm_atomic_state *state); ... } @@ identifier connector, connector_state; @@ struct drm_connector_helper_funcs { ... void (*atomic_commit)(struct drm_connector *connector, - struct drm_connector_state *connector_state); + struct drm_atomic_state *state); ... } @@ struct drm_connector_helper_funcs *FUNCS; identifier state; identifier connector, connector_state; identifier f; @@ f(..., struct drm_atomic_state *state, ...) { <+... - FUNCS->atomic_commit(connector, connector_state); + FUNCS->atomic_commit(connector, state); ...+> } @@ struct drm_connector_helper_funcs *FUNCS; identifier state; identifier connector, connector_state; identifier var, f; @@ f(struct drm_atomic_state *state, ...) { <+... - var = FUNCS->atomic_best_encoder(connector, connector_state); + var = FUNCS->atomic_best_encoder(connector, state); ...+> } @ connector_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_connector_helper_funcs helpers = { ..., .atomic_best_encoder = func, ..., }; | static struct drm_connector_helper_funcs helpers = { ..., .atomic_commit = func, ..., }; ) @@ identifier connector_atomic_func.func; identifier connector; symbol state; @@ func(struct drm_connector *connector, - struct drm_connector_state *state + struct drm_connector_state *connector_state ) { ... - state + connector_state ... } @ ignores_state @ identifier connector_atomic_func.func; identifier connector, connector_state; @@ func(struct drm_connector *connector, struct drm_connector_state *connector_state) { ... when != connector_state } @ adds_state depends on connector_atomic_func && !ignores_state @ identifier connector_atomic_func.func; identifier connector, connector_state; @@ func(struct drm_connector *connector, struct drm_connector_state *connector_state) { + struct drm_connector_state *connector_state = drm_atomic_get_new_connector_state(state, connector); ... } @ depends on connector_atomic_func @ identifier connector_atomic_func.func; identifier connector_state; identifier connector; @@ func(struct drm_connector *connector, - struct drm_connector_state *connector_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201118094758.506730-1-maxime@cerno.tech
2020-11-18drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3.Maarten Lankhorst
Small changes to intel_dp_mode_valid(), allow listing modes that can only be supported in the bigjoiner configuration, which is not supported yet. v13: * Allow bigjoiner if hdisplay >5120 v12: * slice_count logic simplify (Ville) * Fix unnecessary changes in downstream_mode_valid (Ville) v11: * Make intel_dp_can_bigjoiner non static so it can be used in intel_display (Manasi) v10: * Simplify logic (Ville) * Allow bigjoiner on edp (Ville) v9: * Restric Bigjoiner on PORT A (Ville) v8: * use source dotclock for max dotclock (Manasi) v7: * Add can_bigjoiner() helper (Ville) * Pass bigjoiner to plane_size validation (Ville) v6: * Rebase after dp_downstream mode valid changes (Manasi) v5: * Increase max plane width to support 8K with bigjoiner (Maarten) v4: * Rebase (Manasi) Changes since v1: - Disallow bigjoiner on eDP. Changes since v2: - Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock, and split off the downstream and source checking to its own function. (Ville) v3: * Rebase (Manasi) Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [vsyrjala: * Keep bigjoiner disabled until everything is ready * Appease checkpatch] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201117194718.11462-3-manasi.d.navare@intel.com
2020-10-20drm/i915: s/intel_dp_sink_dpms/intel_dp_set_power/Ville Syrjälä
Rename intel_dp_sink_dpms() to intel_dp_set_power() so one doesn't always have to convert from the DPMS enum values to the actual DP D-states. Also when dealing with a branch device this has nothing to do with any sink, so the old name was nonsense anyway. Also adjust the debug message accordingly, and pimp it with the standard encoder id+name thing. Trivial bits done with cocci: @@ expression DP; @@ ( - intel_dp_sink_dpms(DP, DRM_MODE_DPMS_OFF) + intel_dp_set_power(DP, DP_SET_POWER_D3) | - intel_dp_sink_dpms(DP, DRM_MODE_DPMS_ON) + intel_dp_set_power(DP, DP_SET_POWER_D0) ) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201016194800.25581-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-10-06drm/i915: Move the initial fastset commit check to encoder hooksImre Deak
Move the checks to decide whether a fastset is possible during the initial commit to an encoder hook. This check is really encoder specific and the next patch will also require this adding a DP encoder specific check. v2: Fix negated condition in gen11_dsi_initial_fastset_check(). v3: Make sure to call the hook for all encoders on the crtc. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201005215311.1475666-1-imre.deak@intel.com
2020-10-01drm/i915: Eliminate intel_dp.regs.dp_tp_{ctl,status}Ville Syrjälä
Now that we've plumbed the crtc state all the way down we can eliminate the DP_TP_{CTL,STATUS} register offsets from intel_dp, and instead we derive them directly from the crtc state. And thus we can get rid of the nasty hack in intel_ddi_get_config() which mutates intel_dp during the readout. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200929233449.32323-12-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-09-24drm/i915: Decouple intel_dp_{min,output}_bpp() from crtc_stateVille Syrjälä
Pass the output_format directly to intel_dp_{min,output}_bpp() rather than passing in the crtc_state and digging out the output_format inside the functions. This will allow us to reuse the functions for mode validation purposes. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917214335.3569-2-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
2020-09-15drm/i915: Reduce INTEL_DISPLAY_ENABLED to just treat outputs as disconnectedVille Syrjälä
Since the display hardware is all there even when INTEL_DISPLAY_ENABLED return false we have to be capable of shutting it down cleanly so as to not anger the hw. To that end let's reduce the effect of !INTEL_DISPLAY_ENABLE to just treating all outputs as disconnected. Should prevent anyone from automagically enabling any of them, while still allowing us to cleanly shut them down. v2: Put the check into the right place for CRT Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200910164256.25983-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-09-01drm/i915: Add HDCP 1.4 support for MST connectorsSean Paul
Now that all the groundwork has been laid, we can turn on HDCP 1.4 over MST. Everything except for toggling the HDCP signalling and HDCP 2.2 support is the same as the DP case, so we'll re-use those callbacks Cc: Juston Li <juston.li@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-12-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-13-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-13-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-15-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-17-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-17-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-18-sean@poorly.run #v7 Changes in v2: -Toggle HDCP from encoder disable/enable -Don't disable HDCP on MST connector destroy, leave that for encoder disable, just ensure the check_work routine isn't running any longer Changes in v3: -Place the shim in the new intel_dp_hdcp.c file (Ville) Changes in v4: -Actually use the mst shim for mst connections (Juston) -Use QUERY_STREAM_ENC_STATUS MST message to verify channel is encrypted Changes in v5: -Add sleep on disable signalling to match hdmi delay Changes in v6: -Disable HDCP over MST on GEN12+ since I'm unsure how it should work and I don't have hardware to test it Changes in v7: -Remove hdcp2 shims for MST in favor of skipping hdcp2 init (Ramalingam) Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-18-sean@poorly.run
2020-09-01drm/i915: Use ddi_update_pipe in intel_dp_mstSean Paul
In order to act upon content_protection property changes, we'll need to implement the .update_pipe() hook. We can re-use intel_ddi_update_pipe for this Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-10-sean@poorly.run #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-11-sean@poorly.run #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20200117193103.156821-11-sean@poorly.run #v3 Link: https://patchwork.freedesktop.org/patch/msgid/20200218220242.107265-11-sean@poorly.run #v4 Link: https://patchwork.freedesktop.org/patch/msgid/20200305201236.152307-11-sean@poorly.run #v5 Link: https://patchwork.freedesktop.org/patch/msgid/20200429195502.39919-11-sean@poorly.run #v6 Link: https://patchwork.freedesktop.org/patch/msgid/20200623155907.22961-12-sean@poorly.run #v7 Changes in v2: -None Changes in v3: -None Changes in v4: -None Changes in v5: -None Changes in v6: -None Changes in v7: -None Changes in v8: -None Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-12-sean@poorly.run
2020-07-13drm/i915/mst: filter out the display mode exceed sink's capabilityLee Shawn C
So far, max dot clock rate for MST mode rely on physcial bandwidth limitation. It would caused compatibility issue if source display resolution exceed MST hub output ability. For example, source DUT had DP 1.2 output capability. And MST docking just support HDMI 1.4 spec. When a HDMI 2.0 monitor connected. Source would retrieve EDID from external and get max resolution 4k@60fps. DP 1.2 can support 4K@60fps because it did not surpass DP physical bandwidth limitation. Do modeset to 4k@60fps, source output display data but MST docking can't output HDMI properly due to this resolution already over HDMI 1.4 spec. Refer to commit <fcf463807596> ("drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks"). Source driver should refer to full_pbn to evaluate sink output capability. And filter out the resolution surpass sink output limitation. Changes since v1: * Using mgr->base.lock to protect full_pbn. Changes since v2: * Add ctx lock. Changes since v3: * s/intel_dp_mst_mode_clock_exceed_pbn_bandwidth/ intel_dp_mst_mode_clock_exceeds_pbn_bw/ * Use the new drm_connector_helper_funcs.mode_valid_ctx to properly pipe down the drm_modeset_acquire_ctx that the probe helpers are using, so we can safely grab &mgr->base.lock without deadlocking Changes since v4: * Move drm_dp_calc_pbn_mode(mode->clock, bpp, false) > port->full_pbn check * Fix the bpp we use in drm_dp_calc_pbn_mode() * Drop leftover (!mgr) check * Don't check for if full_pbn is unset. To be clear - it _can_ be unset, but if it is then it's certainly a bug in DRM or a non-compliant sink as full_pbn should always be populated by the time we call ->mode_valid_ctx. We should workaround non-compliant sinks with full_pbn=0, but that should happen in the DP MST helpers so we can estimate the full_pbn value as best we can. Tested-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Cooper Chiou <cooper.chiou@intel.com> Co-developed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200713170746.254388-3-lyude@redhat.com
2020-07-02drm/i915/display: prefer dig_port to reference intel_digital_portLucas De Marchi
We have a mix of dport, intel_dport, intel_dig_port and dig_port to reference a intel_digital_port struct. Numbers are around 5 intel_dport 36 dport 479 intel_dig_port 352 dig_port Since we already removed the intel_ prefix from most of our other structs, do the same here and prefer dig_port. v2: rename everything in i915, not just a few display sources and reword commit message (from Matt Roper) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com
2020-06-25Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking API: convert mmap_sem comments"). Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-06-24drm/i915/dp_mst: Enable VC payload allocation after transcoder is enabledImre Deak
The spec requires enabling the MST Virtual Channel payload allocation - in a separate step - after the transcoder is enabled, follow this. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200623082411.3889-1-imre.deak@intel.com
2020-06-24Merge tag 'drm-misc-next-2020-06-19' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
2020-06-23drm/i915/dp_mst: Clear the ACT sent flag during encoder disabling tooImre Deak
During encoder enabling we clear the flag before starting the ACT sequence and wait for the flag, but the clearing is missing during encoder disabling, add it there too. Since nothing cleared the flag automatically we could've run subsequent disabling steps too early. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200616141855.746-5-imre.deak@intel.com
2020-06-23drm/i915/dp_mst: Clear only the ACT sent flag from DP_TP_STATUSImre Deak
It's not clear if the DP_TP_STATUS flags other than the ACT sent flag have some side-effect, so don't clear those; we don't depend on the state of these flags anyway. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200616141855.746-4-imre.deak@intel.com
2020-06-23drm/i915/dp_mst: Move clearing the ACT sent flag closer to its pollingImre Deak
During transcoder enabling we'll configure the transcoder in MST mode and enable the VC payload allocation, which will start the ACT sequence. Before waiting for the ACT sequence completion, we need to clear the ACT sent flag, but based on the above we can do this right before enabling the transcoder. For clarity, move the flag clearing closer to where we wait for it. While at it also factor out some common code. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200616141855.746-3-imre.deak@intel.com
2020-06-16drm/i915/icl: Disable DIP on MST ports with the transcoder clock still onImre Deak
According to BSpec the Data Island Packet should be disabled after disabling the transcoder, but before the transcoder clock select is set to none. On an ICL RVP, daisy-chained MST config not following this leads to a hang with the following MCE when disabling the output: [ 870.948739] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: ba00000011000402 [ 871.019212] mce: [Hardware Error]: RIP !INEXACT! 10:<ffffffff81aca652> {poll_idle+0x92/0xb0} [ 871.019212] mce: [Hardware Error]: TSC 135a261fe61 [ 871.019212] mce: [Hardware Error]: PROCESSOR 0:706e5 TIME 1591739604 SOCKET 0 APIC 0 microcode 20 [ 871.019212] mce: [Hardware Error]: Run the above through 'mcelog --ascii' [ 871.019212] mce: [Hardware Error]: Machine check: Processor context corrupt [ 871.019212] Kernel panic - not syncing: Fatal machine check [ 871.019212] Kernel Offset: disabled Bspec: 4287 Fixes: fa37a213275c ("drm/i915: Stop sending DP SDPs on ddi disable") Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200609220616.6015-1-imre.deak@intel.com (cherry picked from commit c980216dd224c52b5c70172753c209b653d84958) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-06-11drm/i915/dp_mst: Work around out-of-spec adapters filtering short pulsesImre Deak
Some TypeC -> native DP adapters, at least the Club 3D CAC-1557 adapter, incorrectly filter out HPD short pulses with a duration less than ~540 usec, leading to MST probe failures. According to the DP Standard 2.0 section 5.1.4: - DP sinks should generate short pulses in the 500 usec -> 1 msec range - DP sources should detect short pulses in the 250 usec -> 2 msec range According to the DP Alt Mode on TypeC Standard section 3.9.2, adapters should detect and forward short pulses according to how sources should detect them as specified in the DP Standard (250 usec -> 2 msec). Based on the above filtering out short pulses with a duration less than 540 usec is incorrect. To make such adapters work add support for a driver polling on MST inerrupt flags, and wire this up in the i915 driver. The sink can clear an interrupt it raised after 110 msec if the source doesn't respond, so use a 50 msec poll period to avoid missing an interrupt. Polling of the MST interrupt flags is explicitly allowed by the DP Standard. This fixes MST probe failures I saw using this adapter and a DELL U2515H monitor. v2: - Fix the wait event timeout for the no-poll case. v3 (Ville): - Fix the short pulse duration limits in the commit log prescribed by the DP Standard. - Add code comment explaining why/how polling is used. - Factor out a helper to schedule the port's hpd irq handler and move it to the rest of hotplug handlers. - Document the new MST callback. - s/update_hpd_irq_state/poll_hpd_irq/ Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200604184500.23730-2-imre.deak@intel.com
2020-06-11drm/i915/icl: Disable DIP on MST ports with the transcoder clock still onImre Deak
According to BSpec the Data Island Packet should be disabled after disabling the transcoder, but before the transcoder clock select is set to none. On an ICL RVP, daisy-chained MST config not following this leads to a hang with the following MCE when disabling the output: [ 870.948739] mce: [Hardware Error]: CPU 0: Machine Check Exception: 5 Bank 6: ba00000011000402 [ 871.019212] mce: [Hardware Error]: RIP !INEXACT! 10:<ffffffff81aca652> {poll_idle+0x92/0xb0} [ 871.019212] mce: [Hardware Error]: TSC 135a261fe61 [ 871.019212] mce: [Hardware Error]: PROCESSOR 0:706e5 TIME 1591739604 SOCKET 0 APIC 0 microcode 20 [ 871.019212] mce: [Hardware Error]: Run the above through 'mcelog --ascii' [ 871.019212] mce: [Hardware Error]: Machine check: Processor context corrupt [ 871.019212] Kernel panic - not syncing: Fatal machine check [ 871.019212] Kernel Offset: disabled Bspec: 4287 Fixes: fa37a213275c ("drm/i915: Stop sending DP SDPs on ddi disable") Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200609220616.6015-1-imre.deak@intel.com
2020-05-20Merge tag 'drm-intel-next-2020-05-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - drm/i915: Show per-engine default property values in sysfs By providing the default values configured into the kernel via sysfs, it is much more convenient for userspace to restore those sane defaults, or at least know what are considered good baseline. This is useful, for example, to cleanup after any failed userspace prior to commencing new jobs. Cross-subsystem Changes: - video/hdmi: Add Unpack only function for DRM infoframe - Includes pull request gvt-next-2020-05-12 Driver Changes: - Restore Cherryview back to full-ppgtt (Chris, Mika) - Document locking guidelines for i915 (Chris, Daniel, Joonas) - Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris) - Display WA #1105: Require linear fb stride to be multiple of 512 bytes on gen9/glk (Ville) - Add Wa_14010685332 for ICP/ICL (Matt R) - Restrict w/a 1607087056 for EHL/JSL (Swathi) - Fix interrupt handling for DP AUX transactions on Tigerlake (Imre) - Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika) - Fix HDC pipeline flush hardware bit on Gen12 (Mika) - Flush L3 when flushing render on Gen12 (Mika) - Invalidate aux table entries forcibly between BB on Gen12 (Mika) - Add aux table invalidate for all engines on Gen12 (Mika) - Force pte cacheline to main memory Gen8+ (Mika) - Add and enable TGL+ SAGV support (Stanislav) - Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian) - Replace zero-length array with flexible-array (Gustavo) - Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris) - Remove wait priority boosting (Chris) - Keep driver module referenced when PMU is active (Chris) - Sanitize RPS interrupts upon resume (Chris) - Extend pcode read timeout to 20 ms (Chris) - Wait for ACT sent before enabling MST pipe (Ville) - Extend support to async relocations to SNB (Chris) - Remove CNL pre-prod workarounds (Ville) - Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan) - Record the active CCID from before reset (Chris) - Mark concurrent submissions with a weak-dependency (Chris) - Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel) - Prevent using semaphores to chain up to external fences (Chris) - Fix GLK watermark calculations (Ville) - Emit await(batch) before MI_BB_START (Chris) - Reset execlists registers before HWSP (Chris) - Drop no-semaphore boosting in favor of fast timeslicing (Chris) - Fix enabled infoframe states of lspcon (Gwan-gyeong) - Program DP SDPs on pipe updates (Gwan-gyeong) - Stop sending DP SDPs on ddi disable (Gwan-gyeong) - Store CS timestamp frequency in Hz (Ville) - Remove unused HAS_FWTABLE macro (Pascal) - Use batchbuffer chaining for relocations to save ring space (Chris) - Try different engines for relocs if MI ops not supported (Chris, Tvrtko) - Lazily acquire the device wakeref for freeing objects (Chris) - Streamline display code arithmetics around rounding etc. (Ville) - Use bw state for per crtc SAGV evaluation (Stanislav) - Track active_pipes in bw_state (Stanislav) - Nuke mode.vrefresh usage (Ville) - Warn if the FBC is still writing to stolen on removal (Chris) - Added new PCode commands prepping for QGV rescricting (Stansilav) - Stop holding onto the pinned_default_state (Chris) - Propagate error from completed fences (Chris) - Ignore submit-fences on the same timeline (Chris) - Pull waiting on an external dma-fence into its routine (Chris) - Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris) - Mark up the racy read of execlists->context_tag (Chris) - Tidy up the return handling for completed dma-fences (Chris) - Introduce skl_plane_wm_level accessor (Stanislav) - Extract SKL SAGV checking (Stanislav) - Make active_pipes check skl specific (Stanislav) - Suspend tasklets before resume sanitization (Chris) - Remove redundant exec_fence (Chris) - Mark the addition of the initial-breadcrumb in the request (Chris) - Transfer old virtual breadcrumbs to irq_worker (Chris) - Read the DP SDPs from the video DIP (Gwan-gyeong) - Program DP SDPs with computed configs (Gwan-gyeong) - Add state readout for DP VSC and DP HDR Metadata Infoframe SDP (Gwan-gyeong) - Add compute routine for DP PSR VSC SDP (Gwan-gyeong) - Use new DP VSC SDP compute routine on PSR (Gwan-gyeong) - Restrict qgv points which don't have enough bandwidth. (Stanislav) - Nuke pointless div by 64bit (Ville) - Static checker code fixes (Nathan, Mika, Chris) - Add logging function for DP VSC SDP (Gwan-gyeong) - Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the crtc state dump (Gwan-gyeong) - Make timeslicing explicit engine property (Chris, Tvrtko) - Selftest and debugging improvements (Chris) - Align variable names with BSpec (Ville) - Tidy up gen8+ breadcrumb emission code (Chris) - Turn intel_digital_port_connected() in a vfunc (Ville) - Use stashed away hpd isr bits in intel_digital_port_connected() (Ville) - Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200515160703.GA19043@jlahtine-desk.ger.corp.intel.com
2020-05-14Merge tag 'drm-intel-next-2020-04-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Fix GitLab #1698: Performance regression with Linux 5.7-rc1 on Iris Plus 655 and 4K screen (Chris) - Add Wa_14011059788 for Tigerlake (Matt A) - Add per ctx batchbuffer wa for timestamp for Gen12 (Mika) - Use indirect ctx bb to load cmd buffer control value from context image to avoid corruption (Mika) - Enable DP Display Audio WA (Uma, Jani) - Update forcewake firmware ranges for Icelake (Radhakrishna) - Add missing deinitialization cases of load failure for display (Jose) - Implement TC cold sequences for Icelake and Tigerlake (Jose) - Unbreak enable_dpcd_backlight modparam (Lyude) - Move the late flush_submission in retire to the end (Chris) - Demote "Reducing compressed framebufer size" message to info (Peter) - Push MST link retraining to the hotplug work (Ville) - Hold obj->vma.lock over for_each_ggtt_vma() (Chris) - Fix timeout handling during TypeC AUX power well enabling for ICL (Imre) - Fix skl+ non-scaled pfit modes (Ville) - Prefer soft-rc6 over RPS DOWN_TIMEOUT (Chris) - Sanitize GT first before poisoning HWSP (Chris) - Fix up clock RPS frequency readout (Chris) - Avoid reusing the same logical CCID (Chris) - Avoid dereferencing a dead context (Chris) - Always enable busy-stats for execlists (Chris) - Apply the aggressive downclocking to parking (Chris) - Restore aggressive post-boost downclocking (Chris) - Scrub execlists state on resume (Chris) - Add debugfs attributes for LPSP (Ansuman) - Improvements to kernel selftests (Chris, Mika) - Add tiled blits selftest (Zbigniew) - Fix error handling in __live_lrc_indirect_ctx_bb() (Dan) - Add pre/post plane updates for SAGV (Stanislav) - Add ICL PG3 PW ID for EHL (Anshuman) - Fix Sphinx build duplicate label warning (Jani) - Error log non-zero audio power refcount after unbind (Jani) - Remove object_is_locked assertion from unpin_from_display_plane (Chris) - Use single set of AUX powerwell ops for gen11+ (Matt R) - Prefer drm_WARN_ON over WARN_ON (Pankaj) - Poison residual state [HWSP] across resume (Chris, Tvrtko) - Convert request-before-CS assertion to debug (Chris) - Carefully order virtual_submission_tasklet (Chris) - Check carefully for an idle engine in wait-for-idle (Chris) - Only close vma we open (Chris) - Trace RPS events (Chris) - Use the RPM config register to determine clk frequencies (Chris) - Drop rq->ring->vma peeking from error capture (Chris) - Check preempt-timeout target before submit_ports (Chris) - Check HWSP cacheline is valid before acquiring (Chris) - Use proper fault mask in interrupt postinstall too (Matt R) - Keep a no-frills swappable copy of the default context state (Chris) - Add atomic helpers for bandwidth (Stanislav) - Refactor setting dma info to a common helper from device info (Michael) - Refactor DDI transcoder code for clairty (Ville) - Extend PG3 power well ID to ICL (Anshuman) - Refactor PFIT code for readability and future extensibility (Ville) - Clarify code split between intel_ddi.c and intel_dp.c (Ville) - Move out code to return the digital_port of the aux ch (Jose) - Move rps.enabled/active and use of RPS interrupts to flags (Chris) - Remove superfluous inlines and dead code (Jani) - Re-disable -Wframe-address from top-level Makefile (Nick) - Static checker and spelling fixes (Colin, Nathan) - Split long lines (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200430124904.GA100924@jlahtine-desk.ger.corp.intel.com
2020-05-11drm/i915/mst: Wait for ACT sent before enabling the pipeVille Syrjälä
The correct sequence according to bspec is to wait for the ACT sent status before we turn on the pipe. Make it so. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200507144125.2458-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-04-22Merge tag 'drm-misc-next-2020-04-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.8: UAPI Changes: - drm: error out with EBUSY when device has existing master - drm: rework SET_MASTER and DROP_MASTER perm handling Cross-subsystem Changes: - mm: export two symbols from slub/slob - fbdev: savage: fix -Wextra build warning - video: omap2: Use scnprintf() for avoiding potential buffer overflow Core Changes: - Remove drm_pci.h - drm_pci_{alloc/free)() are now legacy - Introduce managed DRM resourcesA - Allow drivers to subclass struct drm_framebuffer - Introduce struct drm_afbc_framebuffer and helpers - fbdev: remove return value from generic fbdev setup - Introduce simple-encoder helper - vram-helpers: set fence on plane - dp_mst: ACT timeout improvements - dp_mst: Remove drm_dp_mst_has_audio() - TTM: ttm_trace_dma_{map/unmap}() cleanups - dma-buf: add flag for PCIP2P support - EDID: Various improvements - Encoder: cleanup semantics of possible_clones and possible_crtcs - VBLANK documentation updates - Writeback documentation updates Driver Changes: - Convert several drivers to i2c_new_client_device() - Drop explicit drm_mode_config_cleanup() calls from drivers - Auto-release device structures with drmm_add_final_kfree() - Init bfdev console after registering DRM device - Make various .debugfs functions return 0 unconditionally; ignore errors - video: Use scnprintf() to avoid buffer overflows - Convert drivers to simple encoders - drm/amdgpu: note that we can handle peer2peer DMA-buf - drm/amdgpu: add support for exporting VRAM using DMA-buf v3 - drm/kirin: Revert change to register connectors - drm/lima: Add optional devfreq and cooling device support - drm/lima: Various improvements wrt. task handling - drm/panel: nt39016: Support multiple modes and 50Hz - drm/panel: Support Leadtek LTK050H3146W - drm/rockchip: Add support for afbc - drm/virtio: Various cleanups - drm/hisilicon/hibmc: Enforce 128-byte stride alignment - drm/qxl: Fix notify port address of cursor ring buffer - drm/sun4i: Improvements to format handling - drm/bridge: dw-hdmi: Various improvements Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200414090738.GA16827@linux-uq9g
2020-04-20drm/i915: Pass encoder all the way to intel_ddi_transcoder_func_reg_val_get()Ville Syrjälä
Pass the encoder all the way down to intel_ddi_transcoder_func_reg_val_get(). Allows us eliminate the intel_ddi_get_crtc_encoder() eyesore. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-4-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com>
2020-04-20drm/i915: Push TRANS_DDI_FUNC_CTL into the encoder->enable() hookVille Syrjälä
Push the TRANS_DDI_FUNC_CTL into the encoder enable hook. The disable is already there, and as a followup will enable us to pass the encoder all the way down. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-3-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com>
2020-04-20drm/i915: Pass encoder to intel_ddi_enable_pipe_clock()Ville Syrjälä
Since intel_ddi_enable_pipe_clock() was pushed down into the encoder hooks we can pass on the encoder instead of having to use intel_ddi_get_crtc_encoder(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200417134720.16654-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com>
2020-04-16Merge drm/drm-next into drm-intel-next-queuedJoonas Lahtinen
Backmerging in order to pull "topic/phy-compliance". Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-04-07drm/dp_mst: Remove drm_dp_mst_has_audio()Lyude Paul
Drive-by fix I noticed the other day - drm_dp_mst_has_audio() only ever made sense back when we still had to validate ports before accessing them in order to (attempt to) avoid NULL dereferences. Since we have proper reference counting that guarantees we always can safely access the MST port, there's no use in keeping this function around as all it does is validate the port pointer before checking the audio status. Note - drm_dp_mst_port->has_audio is technically protected by drm_device->mode_config.connection_mutex, since it's only ever updated from drm_dp_mst_get_edid(). Additionally, we change the declaration for port in struct intel_connector to be properly typed, so we can directly access it. Changes since v1: * Change type of intel_connector->port in a separate patch - Sean Paul Cc: "Lee, Shawn C" <shawn.c.lee@intel.com> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-2-lyude@redhat.com
2020-04-03drm/i915: Pass atomic state to encoder hooksVille Syrjälä
We're going to want access to the atomic state for iterating the slave crtcs when enabling the port sync master crtc. Pass the atomic state all the way down. The alternative would be yet another encoder hook which we'll have to call after all the normal modeset stuff is done. Not really a fan of yet another hook just for this. Note that during readout state sanitation we are now going to pass NULL as the atomic state since we don't have one. We need to change that and then we can also s/crtc_state/crtc/ and s/conn_state/conn/ for the encoder hooks as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-13-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-03-27drm/i915/mst: Use .compute_config_late() to compute master transcoderVille Syrjälä
Use the recently introduced encoder .compute_config_late() hook to do the MST master transcoder assignment. Avoids having to do it in a funny way before we know the CPU transcoder of each pipe. And now we can also properly use hw.active instead of uapi.active since it too has been calculated earlier for everyone. Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-2-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-03-27drm/i915: Get rid of silly void* from MST codeVille Syrjälä
Not sure why this thing is trying to avoid declaring the proper type for these pointers. But since these are used only once let's just get rid of the local variable entirely. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310202752.28454-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-03-25drm/i915/dp_mst: use struct drm_device based loggingJani Nikula
Convert all the DRM_* logging macros to the struct drm_device based macros to provide device specific logging. No functional changes. Generated using the following semantic patch, originally written by Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_NOTE( +drm_notice(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_NOTE( +drm_notice(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } Cc: Wambui Karuga <wambui.karugax@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/5ee3b8040658b5b4ef0b8b1a546fa04f554cdf6a.1584714939.git.jani.nikula@intel.com
2020-03-19Merge tag 'drm-misc-next-2020-03-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.7: UAPI Changes: Cross-subsystem Changes: Core Changes: - dp-mst: Remove register_connector callback, add drm_dp_destroy_connector - Changes to scnprintf on multiple instances Driver Changes: - meson: Support for YUV420 - panel: Support Ortustech COM37H3M, idk-1110wr and idk-2121wr, multiple dotclock fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200317082858.lubmvlmvoprn2tuh@gilmour.lan
2020-03-19Merge tag 'drm-intel-next-2020-03-13' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: On i915 we have a new UAPI to allow userspace to specify CS ring buffer size on construction (I915_CONTEXT_PARAM_RINGSIZE) and also new sysfs entries exposing various engine properties GVT Changes: VFIO edid getting expanded to all platforms and a big cleanup around attr group, unused vblank complete, kvmgt, Intel engine and dev_priv usages. i915 Changes: - new UAPI to allow userspace to specify CS ring buffer size on construction (I915_CONTEXT_PARAM_RINGSIZE) - (Chris) - New sysfs entries exposing various engine properties (Chris) - Tiger Lake is out of require_force_probe protection (Jose) - Changes in many places around active requests, reset and heartbeat (Chris) - Stop assigning drm-dev_private pointer (Jani) - Many code refactor in many places, including intel_modeset_init, increasing use of intel_uncore_*, vgpu, and gvt stuff (Jani) - Fixes around display pipe iterators (Anshuman) - Tigerlake enabling work (Matt Ropper, Matt Atwood, Ville, Lucas, Daniele, Jose, Anusha, Vivek, Swathi, Caz. Kai) - Code clean-up like reducing use of drm/i915_drv.h, removing unused registers, removing garbage warns, and some other code polishing (Jani, Lucas, Ville) - Selftests fixes, improvements and additions (Chris, Dan, Aditya, Matt Auld) - Fix plane possible_crtcs bit mask (Anshuman) - Fixes and cleanup on GLK pre production identification and w/a (Ville) - Fix display orientation on few cases (Hans, Ville) - dbuf clean-up and improvements for slice arrays handling (Ville) - Improvement around min cdclk calculation (Stanislav) - Fixes and refactor around display PLLs (Imre) - Other execlists and perf fixes (Chris) - Documentation fixes (Jani, Chris) - Fix build issue (Anshuman) - Many more fixes around the locking mechanisms (Chris) - Other fixes and debugability info around preemption (Chris, Tvrtko) - Add mechanism to submit a context WA on ring submission (Mika) - Clear all Eu/L3 resitual context (Prathap) - More changes around local memory (Abdiel, Matt, Chris) - Fix RPS (Chris) - DP MST fix (Lyude) - Display FBC fixes (Jose, RK) - debugfs cleanup (Tvrtko) - More convertion towards drm_debive based loggin (Wambui, Ram) - Avoid potential buffer overflow (Takashi) - Ice Lake and Elkhart Lake workarounds (Matt Roper) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200314001535.GA2969344@intel.com
2020-03-11drm: Remove drm dp mst destroy_connector callbacksPankaj Bharadiya
drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical amongst every driver and don't do anything other than cleaning up the connector((drm_connector_unregister()/drm_connector_put())) except for amdgpu_dm driver where some amdgpu_dm specific code in there. This connector cleaning up is now being handled in the drm core so driver destroy_connector callbacks are not needed (except for amdgpu_dm) hence remove them. Removal is done with below sementic patch: @r1@ identifier func, E; @@ struct drm_dp_mst_topology_cbs E = { ..., - .destroy_connector = func }; @delete depends on r1@ identifier r1.func; @@ - static void func(...){...} Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Suggested-by: Emil Velikov <emil.velikov@collabora.com> Suggested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-6-pankaj.laxminarayan.bharadiya@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2020-03-11drm: Remove dp mst register connector callbacksPankaj Bharadiya
drm_dp_mst_port_add_connector() directly calls the drm_connector_register() now and drm_dp_mst_topology_mgr_cbs.register_connector callback is not getting called anymore. Hence remove all drm_dp_mst_topology_mgr_cbs.register_connector callbacks. This is the preparatory step for removing the drm_dp_mst_topology_mgr_cbs.register_connector callback hook. The removal is done with below sementic patch: @r1@ identifier func, E; @@ struct drm_dp_mst_topology_cbs E = { ..., - .register_connector = func }; @delete depends on r1@ identifier r1.func; @@ - static void func(...){...} Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Suggested-by: Emil Velikov <emil.velikov@collabora.com> Suggested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-3-pankaj.laxminarayan.bharadiya@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2020-03-10drm/i915/mst: Hookup DRM DP MST late_register/early_unregister callbacksLyude Paul
i915 can enable aux device nodes for DP MST by calling drm_dp_mst_connector_late_register()/ drm_dp_mst_connector_early_unregister(), so let's hook that up. Changes since v1: * Call intel_connector_register/unregister() from intel_dp_mst_connector_late_register/unregister() so we don't lose error injection - Ville Syrjälä Changes since v2: * Don't forget to clean up if intel_connector_register() fails - Ville Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: "Lee, Shawn C" <shawn.c.lee@intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310195122.1590925-1-lyude@redhat.com
2020-03-06drm/i915/display: Remove drm_fb_helper_{add,remove}_one_connector callsPankaj Bharadiya
drm_fb_helper_{add,remove}_one_connector() are dummy functions now and serve no purpose. Hence remove their calls. This is the preparatory step for removing the drm_fb_helper_{add,remove}_one_connector() functions from drm_fb_helper.h Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-5-pankaj.laxminarayan.bharadiya@intel.com
2020-03-03drm/dp: Introduce EDID-based quirksLyude Paul
The whole point of using OUIs is so that we can recognize certain devices and potentially apply quirks for them. Normally this should work quite well, but there appears to be quite a number of laptop panels out there that will fill the OUI but not the device ID. As such, for devices like this I can't imagine it's a very good idea to try relying on OUIs for applying quirks. As well, some laptop vendors have confirmed to us that their panels have this exact issue. So, let's introduce the ability to apply DP quirks based on EDID identification. We reuse the same quirk bits for OUI-based quirks, so that callers can simply check all possible quirks using drm_dp_has_quirk(). Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200211183358.157448-2-lyude@redhat.com
2020-02-15drm/i915/mst: Set intel_dp_set_m_n() for MST slavesJosé Roberto de Souza
Commit 1c9d2eb24153 ("drm/i915: move intel_dp_set_m_n() to encoder for DDI platforms") moved the intel_dp_set_m_n() from hsw_crtc_enable() to intel_ddi_pre_enable_dp() but it missed add it to intel_mst_pre_enable_dp() causing MST slaves to not work. v2: Not setting intel_ddi_set_dp_msa() twice for MST master Fixes: 1c9d2eb24153 ("drm/i915: move intel_dp_set_m_n() to encoder for DDI platforms") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200211185008.30806-1-jose.souza@intel.com
2020-02-10drm/i915/mst: fix pipe and vblank enableJani Nikula
Commit 21fd23ac222f ("drm/i915: move pipe, pch and vblank enable to encoders on DDI platforms") pushed pipe and vblank enable to encoders on DDI platforms, however it missed the DP MST encoder. Fix it. Fixes: 21fd23ac222f ("drm/i915: move pipe, pch and vblank enable to encoders on DDI platforms") Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reported-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Tested-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200205082959.31317-1-jani.nikula@intel.com
2020-02-07Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi
Moving the base forward since this one was so old. New base contains fixes that we needed. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-02-04drm/i915/display: Make WARN* drm specific where drm_device ptr is availablePankaj Bharadiya
drm specific WARN* calls include device information in the backtrace, so we know what device the warnings originate from. Covert all the calls of WARN* with device specific drm_WARN* variants in functions where drm_device or drm_i915_private struct pointer is readily available. The conversion was done automatically with below coccinelle semantic patch. checkpatch errors/warnings are fixed manually. @rule1@ identifier func, T; @@ func(...) { ... struct drm_device *T = ...; <... ( -WARN( +drm_WARN(T, ...) | -WARN_ON( +drm_WARN_ON(T, ...) | -WARN_ONCE( +drm_WARN_ONCE(T, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(T, ...) ) ...> } @rule2@ identifier func, T; @@ func(struct drm_device *T,...) { <... ( -WARN( +drm_WARN(T, ...) | -WARN_ON( +drm_WARN_ON(T, ...) | -WARN_ONCE( +drm_WARN_ONCE(T, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(T, ...) ) ...> } @rule3@ identifier func, T; @@ func(...) { ... struct drm_i915_private *T = ...; <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } @rule4@ identifier func, T; @@ func(struct drm_i915_private *T,...) { <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200128181603.27767-20-pankaj.laxminarayan.bharadiya@intel.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-18 20:19:56 +0000