summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_fbc.c
AgeCommit message (Collapse)Author
2021-06-24drm/i915/fbc: Allocate llb before cfbVille Syrjälä
Since the llb allocation has a fixed size, let's grab it before the potentially variable sized cfb. That should avoid some allocation failure cases once we allow different compression ratios for FBC1. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-10-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24drm/i915/fbc: Make the cfb allocation loop a bit more legibleVille Syrjälä
Write the cfb allocation loop as an actual loop instead of some hard to read goto thing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-9-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24drm/i915/fbc: Extract intel_fbc_stolen_end()Ville Syrjälä
Declutter find_compression_limit() a bit by extracting intel_fbc_stolen_end(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-8-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24drm/i915/fbc: Introduce g4x_dpfc_ctl_limit()Ville Syrjälä
Exctract the limit->register value conversion into a common helper. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-7-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24drm/i915/fbc: Handle 16bpp compression limit betterVille Syrjälä
The limit++ for the 16bpp case is nonsense since the compression limit is always supposed to be power of two. Replace it with <<=1. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-6-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24drm/i915/fbc: Don't pass around the mm nodeVille Syrjälä
No point in passing the mm node explicitly to find_compression_limit() since it's always the same node for the cfb. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-5-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24drm/i915/fbc: Embed the compressed_llb nodeVille Syrjälä
Not much point in dynamically allocating the line length buffer mm node that I can see. Just embed it directly like we do the for the cfb node. One less failure point to worry about. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-4-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24drm/i915/fbc: Extract intel_fbc_program_cfb()Ville Syrjälä
Extract the CFB (+LLB) programming into a separate function. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-3-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-06-24drm/i915/fbc: s/threshold/limit/Ville Syrjälä
Let's call the compression limit the limit. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210610183237.3920-2-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2021-05-07drm/i915/xelpd: First stab at DPT supportVille Syrjälä
Add support for DPT (display page table). DPT is a slightly peculiar two level page table scheme used for tiled scanout buffers (linear uses direct ggtt mapping still). The plane surface address will point at a page in the DPT which holds the PTEs for 512 actual pages. Thus we require 1/512 of the ggttt address space compared to a direct ggtt mapping. We create a new DPT address space for each framebuffer and track two vmas (one for the DPT, another for the ggtt). TODO: - Is the i915_address_space approaach sane? - Maybe don't map the whole DPT to write the PTEs? - Deal with remapping/rotation? Need to create a separate DPT for each remapped/rotated plane I guess. Or else we'd need to make the per-fb DPT large enough to support potentially several remapped/rotated vmas. How large should that be? Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Bommu Krishnaiah <krishnaiah.bommu@intel.com> Cc: Wilson Chris P <Chris.P.Wilson@intel.com> Cc: Tang CQ <cq.tang@intel.com> Cc: Auld Matthew <matthew.auld@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Wilson Chris P <Chris.P.Wilson@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210506161930.309688-5-imre.deak@intel.com
2021-05-05drm/i915: Don't include intel_de.h from intel_display_types.hVille Syrjälä
Hoist the intel_de.h include from intel_display_types.h one level up. I need this in order to untangle the include order so that I can add tracepoints into intel_de.h. This little cocci script did most of the work for me: @find@ @@ ( intel_de_read(...) | intel_de_read_fw(...) | intel_de_write(...) | intel_de_write_fw(...) ) @has_include@ @@ ( #include "intel_de.h" | #include "display/intel_de.h" ) @depends on find && !has_include@ @@ + #include "intel_de.h" #include "intel_display_types.h" @depends on find && !has_include@ @@ + #include "display/intel_de.h" #include "display/intel_display_types.h" Cc: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com
2021-04-14drm/i915/display: rename display version macrosLucas De Marchi
While converting the rest of the driver to use GRAPHICS_VER() and MEDIA_VER(), following what was done for display, some discussions went back on what we did for display: 1) Why is the == comparison special that deserves a separate macro instead of just getting the version and comparing directly like is done for >, >=, <=? 2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for brevity. If we remove the current users of IS_DISPLAY_VER(), we could actually repurpose it for a range check With (1) there could be an advantage if we used gen_mask since multiple conditionals be combined by the compiler in a single and instruction and check the result. However a) INTEL_GEN() doesn't use the mask since it would make the code bigger everywhere else and b) in the cases it made sense, it also made sense to convert to the _RANGE() variant. So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER() users to use == and != operators. Aside from the definition changes, this was done by the following semantic patch: @@ expression dev_priv, E1; @@ - !IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) != E1 @@ expression dev_priv, E1; @@ - IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) == E1 @@ expression dev_priv, from, until; @@ - IS_DISPLAY_RANGE(dev_priv, from, until) + IS_DISPLAY_VER(dev_priv, from, until) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> [Jani: Minor conflict resolve while applying.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-4-lucas.demarchi@intel.com
2021-04-14drm/i915: Restore lost glk FBC 16bpp w/aVille Syrjälä
We lost the FBC 16bpp 512byte stride requirement on glk when we switched from display version 9 to 10. Restore the w/a to avoid enabling FBC with a bad stride and thus display garbage. Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412054607.18133-2-ville.syrjala@linux.intel.com
2021-04-14drm/i915/display: Eliminate IS_GEN9_{BC,LP}Matt Roper
Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the display code, we should also kill off our use of the IS_GEN9_* macros too. We'll do the conversion manually this time instead of using Coccinelle since the most logical substitution can depend heavily on the code context, and sometimes we can keep the code simpler if we make additional adjustments such as swapping the order of if/else arms. v2: - Restore a lost negation in intel_pll_is_valid(). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com (cherry picked from commit 70bfb30743d5da73058b0a2271e9c127a84fb494) [Jani: cherry picked to topic branch to reduce conflicts] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-03-29drm/i915: Unify the FB and plane state view information into one structImre Deak
To allow the simplification of FB/plane view computation in the follow-up patches, unify the corresponding state in the intel_framebuffer and intel_plane_state structs into a new intel_fb_view struct. This adds some overhead to intel_framebuffer as the rotated view will have now space for 4 color planes instead of the required 2 and it'll also contain the unused offset for each color_plane info. Imo this is an acceptable trade-off to get a simplified way of the remap computation. Use the new intel_fb_view struct for the FB normal view as well, so (in the follow-up patches) we can remove the special casing for normal view calculation wrt. the calculation of remapped/rotated views. This also adds an overhead to the intel_framebuffer struct, as the gtt remap info and per-color plane offset/pitch is not required for the normal view, but imo this is an acceptable trade-off as above. The per-color plane pitch filed will be used by a follow-up patch, so we can retrieve the pitch for each view in the same way. No functional changes in this patch. v2: - Make the patch have _no functional change_. (fix skl_check_nv12_aux_surface() and skl_check_main_surface()). - s/i915_color_plane_view::pitch/stride/ (Ville) Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-17-imre.deak@intel.com
2021-03-23drm/i915/display: Simplify GLK display version testsMatt Roper
GLK has always been a bit of a special case since it reports INTEL_GEN() as 9, but has version 10 display IP. Now we can properly represent the display version as 10 and simplify the display generation tests throughout the display code. Aside from manually adding the version to the glk_info structure, the rest of this patch is generated with a Coccinelle semantic patch. Note that we also need to switch any code that matches gen10 today but *not* GLK to be CNL-specific: @@ expression dev_priv; @@ - DISPLAY_VER(dev_priv) > 9 + DISPLAY_VER(dev_priv) >= 10 @@ expression dev_priv, E; @@ ( - DISPLAY_VER(dev_priv) >= 10 && E + (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) && E | - DISPLAY_VER(dev_priv) >= 10 + DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) | - IS_DISPLAY_RANGE(dev_priv, 10, E) + IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_CANNONLAKE(dev_priv) ) @@ expression dev_priv, E, E2; @@ ( - (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 10) | - E || IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv) + E || IS_DISPLAY_VER(dev_priv, 10) | - (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 10) | - IS_GEMINILAKE(dev_priv) || E || IS_CANNONLAKE(dev_priv) + E || IS_DISPLAY_VER(dev_priv, 10) | - E || IS_GEMINILAKE(dev_priv) || E2 || IS_CANNONLAKE(dev_priv) + E || E2 || IS_DISPLAY_VER(dev_priv, 10) | - (IS_DISPLAY_VER(dev_priv, 10) || IS_GEMINILAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 10) | - (IS_GEMINILAKE(dev_priv) || IS_DISPLAY_VER(dev_priv, 10)) + IS_DISPLAY_VER(dev_priv, 10) ) @@ expression dev_priv; @@ - (IS_DISPLAY_VER(dev_priv, 9) && !IS_GEMINILAKE(dev_priv)) + IS_DISPLAY_VER(dev_priv, 9) @@ expression dev_priv; @@ ( - !(DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10)) + DISPLAY_VER(dev_priv) < 10 | - (DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10)) + DISPLAY_VER(dev_priv) >= 10 ) @@ expression dev_priv, E; @@ - E || DISPLAY_VER(dev_priv) >= 11 || IS_DISPLAY_VER(dev_priv, 10) + E || DISPLAY_VER(dev_priv) >= 10 @@ expression dev_priv, E; @@ - (IS_DISPLAY_RANGE(dev_priv, 11, E) || IS_DISPLAY_VER(dev_priv, 10)) + IS_DISPLAY_RANGE(dev_priv, 10, E) @@ expression dev_priv; @@ ( - DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) || IS_GEN9_LP(dev_priv) + DISPLAY_VER(dev_priv) >= 10 || IS_GEN9_LP(dev_priv) | - IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv) + IS_GEN9_LP(dev_priv) || DISPLAY_VER(dev_priv) >= 10 ) @@ expression dev_priv, E; @@ - !(DISPLAY_VER(dev_priv) >= E) + DISPLAY_VER(dev_priv) < E v2: - Convert gen10 conditions that don't include GLK into CNL conditions. (Ville) v3: - Rework coccinelle rules so that "ver>=10" turns into "ver>=11||is_cnl." (Ville) v3.1: - Manually re-add the ".display.version = 10" to glk_info after regenerating patch via Coccinelle. v4: - Also apply cocci rules to intel_pm.c and i915_irq.c! (CI) Cc: Ville Syrjälä <ville.syrjala@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210322233840.4056851-1-matthew.d.roper@intel.com
2021-03-23drm/i915/display: Eliminate most usage of INTEL_GEN()Matt Roper
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN() in the display code to use DISPLAY_VER() comparisons instead. The following semantic patch was used: @@ expression dev_priv, E; @@ - INTEL_GEN(dev_priv) == E + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; @@ - INTEL_GEN(dev_priv) + DISPLAY_VER(dev_priv) @@ expression dev_priv; expression E; @@ - IS_GEN(dev_priv, E) + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; expression from, until; @@ - IS_GEN_RANGE(dev_priv, from, until) + IS_DISPLAY_RANGE(dev_priv, from, until) There are still some display-related uses of INTEL_GEN() in intel_pm.c (watermark code) and i915_irq.c. Those will be updated separately. v2: - Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
2021-03-23drm/i915/display: Convert gen5/gen6 tests to IS_IRONLAKE/IS_SANDYBRIDGEMatt Roper
ILK is the only platform that we consider "gen5" and SNB is the only platform we consider "gen6." Add an IS_SANDYBRIDGE() macro and then replace numeric platform tests for these two generations with direct platform tests with the following Coccinelle semantic patch: @@ expression dev_priv; @@ - IS_GEN(dev_priv, 5) + IS_IRONLAKE(dev_priv) @@ expression dev_priv; @@ - IS_GEN(dev_priv, 6) + IS_SANDYBRIDGE(dev_priv) @@ expression dev_priv; @@ - IS_GEN_RANGE(dev_priv, 5, 6) + IS_IRONLAKE(dev_priv) || IS_SANDYBRIDGE(dev_priv) This will simplify our upcoming patches which eliminate INTEL_GEN() usage in the display code. v2: - Reverse ilk/snb order for IS_GEN_RANGE conversion. (Ville) - Rebase + regenerate from semantic patch Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-2-matthew.d.roper@intel.com
2021-01-14drm/i915/display: fix the uint*_t types that have crept inJani Nikula
Always prefer the kernel types over stdint types in i915. Cc: Imre Deak <imre.deak@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210113141158.25513-1-jani.nikula@intel.com
2020-12-02Revert "drm/i915/display/fbc: Disable fbc by default on TGL"Uma Shankar
FBC can be re-enabled on TGL with WA of keeping it disabled while PSR2 is enabled. This reverts commit 2982ded2ff5ce0cf1a49bc39a526da182782b664. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201190406.1752-3-uma.shankar@intel.com
2020-12-02drm/i915/display/tgl: Disable FBC with PSR2Uma Shankar
There are some corner cases wrt underrun when we enable FBC with PSR2 on TGL. Recommendation from hardware is to keep this combination disabled. Bspec: 50422 HSD: 14010260002 v2: Added psr2 enabled check from crtc_state (Anshuman) Added Bspec link and HSD referneces (Jose) v3: Moved the logic to disable fbc to intel_fbc_update_state_cache and removed the crtc->config usages, as per Ville's recommendation. v4: Introduced a variable in fbc state_cache instead of the earlier plane.visible WA, as suggested by Jose. v5: Dropped an extra check for fbc in intel_fbc_enable and addressed review comments by Jose. v6: Move WA to end of function and added Jose's RB. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201190406.1752-2-uma.shankar@intel.com
2020-10-19drm/i915/display/fbc: Implement WA 22010751166José Roberto de Souza
Underruns happens when plane height + y offset is not a modulo of 4 when FBC is enabled. It happens when scanline is at vactive - 10 but that is not feasible to do from the software side so here completely disabling FBC when height + y offset matches to avoid visual glitches. Specification says that it only affects TGL display C stepping and newer but to simply the check and as TGL is already in final costumers hands, pre-production display stepping A and B was also included. BSpec: 52887 ICL BSpec: 52888 EHL/JSL BSpec: 52890/55378 TGL BSpec: 53508 DG1 BSpec: 53273 RKL Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201019175609.28715-1-jose.souza@intel.com
2020-08-28Merge tag 'drm-intel-next-2020-08-24-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Introduce a mechanism to extend execbuf2 (Lionel) - Add syncobj timeline support (Lionel) Driver Changes: - Limit stolen mem usage on the compressed frame buffer (Ville) - Some clean-up around display's cdclk (Ville) - Some DDI changes for better DP link training according to spec (Imre) - Provide the perf pmu.module (Chris) - Remove dobious Valleyview PCI IDs (Alexei) - Add new display power saving feature for gen12+ called HOBL (Jose) - Move SKL's clock gating w/a to skl_init_clock_gating() (Ville) - Rocket Lake display additions (Matt) - Selftest: temporarily downgrade on severity of frequency scaling tests (Chris) - Introduce a new display workaround for fixing FLR related issues on new PCH. (Jose) - Temporarily disable FBC on TGL. It was the culprit of random underruns. (Uma). - Copy default modparams to mock i915_device (Chris) - Add compiler paranoia for checking HWSP values (Chris) - Remove useless gen check before calling intel_rps_boost (Chris) - Fix a null pointer dereference (Chris) - Add a couple of missing i915_active_fini() (Chris) - Update TGL display power's bw_buddy table according to update spec (Matt) - Fix couple wrong return values (Tianjia) - Selftest: Avoid passing random 0 into ilog2 (George) - Many Tiger Lake display fixes and improvements for Type-C and DP compliance (Imre, Jose) - Start the addition of PSR2 selective fetch (Jose) - Update a few DMC and HuC firmware versions (Jose) - Add gen11+ w/a to fix underuns (Matt) - Fix cmd parser desc matching with mask (Mika) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826232733.GA129053@intel.com
2020-08-17drm/i915/display/fbc: Disable fbc by default on TGLUma Shankar
Fbc is causing random underruns in CI execution on TGL platforms. Disabling the same while the problem is being debugged and analyzed. v2: Moved the check below the module param check (Ville) Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716145857.6911-1-uma.shankar@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-08-17drm/i915/fbc: Limit cfb to the first 256MiB of stolen on g4x+Ville Syrjälä
Since g4x the CFB base only takes a 28bit offset into stolen. Not sure if the CFB is allowed to start below that limit but then extend beyond it. Let's assume not and just restrict the allocation to the first 256MiB (in the unlikely case we have more stolen than that). v2: s/BIT/BIT_ULL/ (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200714201945.18959-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-08-05Merge tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "New xilinx displayport driver, AMD support for two new GPUs (more header files), i915 initial support for RocketLake and some work on their DG1 (discrete chip). The core also grew some lockdep annotations to try and constrain what drivers do with dma-fences, and added some documentation on why the idea of indefinite fences doesn't work. The long list is below. I do have some fixes trees outstanding, but I'll follow up with those later. core: - add user def flag to cmd line modes - dma_fence_wait added might_sleep - dma-fence lockdep annotations - indefinite fences are bad documentation - gem CMA functions used in more drivers - struct mutex removal - more drm_ debug macro usage - set/drop master api fixes - fix for drm/mm hole size comparison - drm/mm remove invalid entry optimization - optimise drm/mm hole handling - VRR debugfs added - uncompressed AFBC modifier support - multiple display id blocks in EDID - multiple driver sg handling fixes - __drm_atomic_helper_crtc_reset in all drivers - managed vram helpers ttm: - ttm_mem_reg handling cleanup - remove bo offset field - drop CMA memtype flag - drop mappable flag xilinx: - New Xilinx ZynqMP DisplayPort Subsystem driver nouveau: - add CRC support - start using NVIDIA published class header files - convert all push buffer emission to new macros - Proper push buffer space management for EVO/NVD channels. - firmware loading fixes - 2MiB system memory pages support on Pascal and newer vkms: - larger cursor support i915: - Rocketlake platform enablement - Early DG1 enablement - Numerous GEM refactorings - DP MST fixes - FBC, PSR, Cursor, Color, Gamma fixes - TGL, RKL, EHL workaround updates - TGL 8K display support fixes - SDVO/HDMI/DVI fixes amdgpu: - Initial support for Sienna Cichlid GPU - Initial support for Navy Flounder GPU - SI UVD/VCE support - expose rotation property - Add support for unique id on Arcturus - Enable runtime PM on vega10 boards that support BACO - Skip BAR resizing if the bios already did id - Major swSMU code cleanup - Fixes for DCN bandwidth calculations amdkfd: - Track SDMA usage per process - SMI events interface radeon: - Default to on chip GART for AGP boards on all arches - Runtime PM reference count fixes msm: - headers regenerated causing churn - a650/a640 display and GPU enablement - dpu dither support for 6bpc panels - dpu cursor fix - dsi/mdp5 enablement for sdm630/sdm636/sdm66 tegra: - video capture prep support - reflection support mediatek: - convert mtk_dsi to bridge API meson: - FBC support sun4i: - iommu support rockchip: - register locking fix - per-pixel alpha support PX30 VOP mgag200: - ported to simple and shmem helpers - device init cleanups - use managed pci functions - dropped hw cursor support ast: - use managed pci functions - use managed VRAM helpers - rework cursor support malidp: - dev_groups support hibmc: - refactor hibmc_drv_vdac: vc4: - create TXP CRTC imx: - error path fixes and cleanups etnaviv: - clock handling and error handling cleanups - use pin_user_pages" * tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits) drm/msm: use kthread_create_worker instead of kthread_run drm/msm/mdp5: Add MDP5 configuration for SDM636/660 drm/msm/dsi: Add DSI configuration for SDM660 drm/msm/mdp5: Add MDP5 configuration for SDM630 drm/msm/dsi: Add phy configuration for SDM630/636/660 drm/msm/a6xx: add A640/A650 hwcg drm/msm/a6xx: hwcg tables in gpulist drm/msm/dpu: add SM8250 to hw catalog drm/msm/dpu: add SM8150 to hw catalog drm/msm/dpu: intf timing path for displayport drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3 drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845 drm/msm/dpu: move some sspp caps to dpu_caps drm/msm/dpu: update UBWC config for sm8150 and sm8250 drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250 drm/msm/a6xx: set ubwc config for A640 and A650 drm/msm/adreno: un-open-code some packets drm/msm: sync generated headers drm/msm/a6xx: add build_bw_table for A640/A650 drm/msm/a6xx: fix crashstate capture for A650 ...
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-07-16treewide: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-14drm/i915: Recalculate FBC w/a stride when neededVille Syrjälä
Currently we're failing to recalculate the gen9 FBC w/a stride unless something more drastic than just the modifier itself has changed. This often leaves us with FBC enabled with the linear fbdev framebuffer without the w/a stride enabled. That will cause an immediate underrun and FBC will get promptly disabled. Fix the problem by checking if the w/a stride is about to change, and go through the full dance if so. This part of the FBC code is still pretty much a disaster and will need lots more work. But this should at least fix the immediate issue. v2: Deactivate FBC when the modifier changes since that will likely require resetting the w/a CFB stride Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200711080336.13423-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 0428ab013fdd39dbfb8f4cd8ad2b60af3776c6b9) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-07-14drm/i915: Recalculate FBC w/a stride when neededVille Syrjälä
Currently we're failing to recalculate the gen9 FBC w/a stride unless something more drastic than just the modifier itself has changed. This often leaves us with FBC enabled with the linear fbdev framebuffer without the w/a stride enabled. That will cause an immediate underrun and FBC will get promptly disabled. Fix the problem by checking if the w/a stride is about to change, and go through the full dance if so. This part of the FBC code is still pretty much a disaster and will need lots more work. But this should at least fix the immediate issue. v2: Deactivate FBC when the modifier changes since that will likely require resetting the w/a CFB stride Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200711080336.13423-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-09drm/i915: Move all FBC w/as to .init_clock_gating()Ville Syrjälä
Some platforms apply the FBC w/as in .init_clock_gating(), some in fbc_activate(). Move them all to .init_clock_gating() for consistentce. Also safer since we don't have to worry about the RMWs clashing with any other runtime use of the same registers. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200708131223.9519-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-06drm/i915/fbc: Fix fence_y_offset handlingVille Syrjälä
The current fence_y_offset calculation is broken. I think it more or less used to do the right thing, but then I changed the plane code to put the final x/y source offsets back into the src rectangle so now it's just subtraacting the same value from itself. The code would never have worked if we allowed the framebuffer to have a non-zero offset. Let's do this in a better way by just calculating the fence_y_offset from the final plane surface offset. Note that we don't align the plane surface address to fence rows so with horizontal panning there's often a horizontal offset from the fence start to the surface address as well. We have no way to tell the hardware about that so we just ignore it. Based on some quick tests the invlidation still happens correctly. I presume due to the invalidation nuking at least the full line (or a segment of multiple lines). Fixes: 54d4d719fa11 ("drm/i915: Overcome display engine stride limits via GTT remapping") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 5331889b5ffb11d6257953e418291a9f04c02bed) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-07-03drm/i915/fbc: Fix nuke for pre-snb platformsVille Syrjälä
The MSG_FBC_REND_STATE register only exists on snb+. For older platforms (would also work for snb+) we can simply rewite DSPSURF to trigger a flip nuke. While generally RMW is considered harmful we'll use it here for simplicity. And since FBC doesn't exist in i830 we don't have to worry about the DSPSURF double buffering hardware fails present on that platform. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-3-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-03drm/i915/fbc: Use the correct plane strideVille Syrjälä
Consult the actual plane stride instead of the fb stride. The two will disagree when we remap the gtt. The plane stride is what the hw will be fed so that's what we should look at for the FBC retrictions/cfb allocation. Since we no longer require a fence we are going to attempt using FBC with remapping, and so we should look at correct stride. With 90/270 degree rotation the plane stride is stored in units of pixels, so we need to conver it to bytes for the purposes of calculating the cfb stride. Not entirely sure if this matches the hw behaviour though. Need to reverse engineer that at some point... We also need to reorder the pixel format check vs. stride check to avoid triggering a spurious WARN(stride & 63) with cpp==1 and plane stride==32. v2: Try to deal with rotated stride and related WARN Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 691f7ba58d52 ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-2-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Reduce fbc1 compression interval to 1 secondVille Syrjälä
The default fbc1 compression interval we use is 500 frames. That translates to over 8 seconds typically. That's rather excessive so let's drop it to 1 second. The hardware will not attempt recompression unless at least one line has been modified, so a shorter compression interval should not cause extra bandwidth use in the purely idle scenario. Of course in the mostly idle case we are possibly going to recompress a bit more. Should really try to find some kind of sweet spot to minimize the energy usage... Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-11-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Store the fbc1 compression interval in the paramsVille Syrjälä
Avoid the FBC_CONTROL rmw and just store the fbc compression interval in the params/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-10-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Parametrize FBC_CONTROLVille Syrjälä
Parametrize the FBC_CONTROL bits for neater code. Also add the one missing bit: "stop compression on modification". Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-9-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Don't clear busy_bits for origin==GTTVille Syrjälä
The hardware host tracking won't nuke the entire cfb (unless the entire fb is written through the gtt) so don't clear the busy_bits for gtt tracking. Not that it really matters anymore since we've lost ORIGIN_GTT usage everywhere. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-7-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Fix fence_y_offset handlingVille Syrjälä
The current fence_y_offset calculation is broken. I think it more or less used to do the right thing, but then I changed the plane code to put the final x/y source offsets back into the src rectangle so now it's just subtraacting the same value from itself. The code would never have worked if we allowed the framebuffer to have a non-zero offset. Let's do this in a better way by just calculating the fence_y_offset from the final plane surface offset. Note that we don't align the plane surface address to fence rows so with horizontal panning there's often a horizontal offset from the fence start to the surface address as well. We have no way to tell the hardware about that so we just ignore it. Based on some quick tests the invlidation still happens correctly. I presume due to the invalidation nuking at least the full line (or a segment of multiple lines). Fixes: 54d4d719fa11 ("drm/i915: Overcome display engine stride limits via GTT remapping") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2020-06-22drm/i915/params: switch to device specific parametersJani Nikula
Start using device specific parameters instead of module parameters for most things. The module parameters become the immutable initial values for i915 parameters. The device specific parameters in i915->params start life as a copy of i915_modparams. Any later changes are only reflected in the debugfs. The stragglers are: * i915.force_probe and i915.modeset. Needed before dev_priv is available. This is fine because the parameters are read-only and never modified. * i915.verbose_state_checks. Passing dev_priv to I915_STATE_WARN and I915_STATE_WARN_ON would result in massive and ugly churn. This is handled by not exposing the parameter via debugfs, and leaving the parameter writable in sysfs. This may be fixed up in follow-up work. * i915.inject_probe_failure. Only makes sense in terms of the module, not the device. This is handled by not exposing the parameter via debugfs. v2: Fix uc i915 lookup code (Michał Winiarski) Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com> Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200618150402.14022-1-jani.nikula@intel.com
2020-05-04drm/i915/display: Warn if the FBC is still writing to stolen on removalChris Wilson
If the FBC is still writing into stolen, it will overwrite any future users of that stolen region. Check before release, just to ease any concerns -- we can remove it again later if it is barking up the wrong tree. References: https://gitlab.freedesktop.org/drm/intel/-/issues/1635 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200503180034.20010-1-chris@chris-wilson.co.uk
2020-05-04drm/i915/fbc: Require linear fb stride to be multiple of 512 bytes on gen9/glkVille Syrjälä
Display WA #1105 says that FBC requires PLANE_STRIDE to be a multiple of 512 bytes on gen9 and glk. This is definitely true for glk as certain tests (such as igt/kms_big_fb/linear-16bpp-rotate-0) are now failing when the display resolution results in a plane stride which is not a multiple of 512 bytes. Curiously I was not able to reproduce this on a KBL. First I suspected that our use of the FBC override stride explain this, but after trying to use the override stride on glk the test still failed. I did try both the old CHICKEN_MISC_4 way and the new FBC_STRIDE way, neither had any effect on the result. Anyways, we need this at least on glk. But let's trust the spec and apply the w/a for all gen9 as well, despite being unable to reproduce the problem. v2: s/FBC_CHICKEN/FBC_STRIDE/ in commit msg Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 691f7ba58d52 ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-2-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2020-04-20Make the "Reducing compressed framebufer size" message be DRM_INFO_ONCE()Peter Jones
This was sort of annoying me: random:~$ dmesg | tail -1 [523884.039227] [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS. random:~$ dmesg | grep -c "Reducing the compressed" 47 This patch makes it DRM_INFO_ONCE() just like the similar message farther down in that function is pr_info_once(). Cc: stable@vger.kernel.org Signed-off-by: Peter Jones <pjones@redhat.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1745 Link: https://patchwork.freedesktop.org/patch/msgid/20180706190424.29194-1-pjones@redhat.com [vsyrjala: Rebase due to per-device logging] Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2020-03-24drm/i915/display/fbc: Make fences a nice-to-have for GEN9+José Roberto de Souza
dGFX has local memory so it does not have aperture or support CPU fences but even for iGFX it have a small number of fences. As replacement for fences to track frontbuffer modifications by CPU we have a software tracking that is already in used by FBC and PSR. PSR don't support fences so it shows that this tracking is reliable. So lets make fences a nice-to-have to activate FBC for GEN9+, this will allow us to enable FBC for dGFXs and iGFXs even when there is no available fence. We do not set fences to rotated planes but FBC only have restrictions against 16bpp, so adding it here. Also adding a new check for the tiling format, fences are only set to X and Y tiled planes but again FBC don't have any restrictions against tiling so adding linear as supported as well, other formats should be added after tested but IGT only supports drawing in thse 3 formats. intel_fbc_hw_tracking_covers_screen() maybe can also have the same treatment as fences but BSpec is not clear if the size limitation is for hardware tracking or general use of FBC and I don't have a 5K display to test it, so keeping as is for safety. v2: - Added tiling and pixel format rotation checks - Changed the GEN version not requiring fences to 11 from 9, DDX needs some changes but it don't have support for GEN11+ v3: - Changed back to GEN9+ - Moved GEN test to inside of tiling_is_valid() v4: - moved rotation check to its own functions v5: - renamed rotations_is_valid to rotation_is_valid - moved pre-g4x rotation check to rotation_is_valid() Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200319211535.114625-1-jose.souza@intel.com
2020-03-18drm/i915/fbc: convert to drm_device based logging macros.Wambui Karuga
This replaces the uses of the printk based drm logging macros with the struct drm_device based logging macros in i915/display/intel_fbc.c. This transformation was done using the following coccinelle semantic patch that matches based on the existence of a drm_i915_private device pointer: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } New checkpatch warnings were addressed manually. v2 by Jani: - also convert pr_info_once to drm based logging Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Wambui Karuga <wambui.karugax@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/32a92f1d4e4d01131605b17bec831517e39c5902.1583766715.git.jani.nikula@intel.com
2020-03-10drm/i915/display: Do not write in removed FBC fence registersRadhakrishna Sripada
Platforms without fences don't have FBC host tracking and those registers are marked as reserved in those platforms. v2: checking num_fences to write to FBC fence registers (Ville) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306185833.53984-2-jose.souza@intel.com
2020-03-10drm/i915/display: Deactive FBC in fastsets when disabled by parameterJosé Roberto de Souza
Most of the kms_frontbuffer_tracking tests disables the feature being tested, draw, get the CRC then enable the feature, draw again, get the CRC and check if it matches. Some times it is able to do that with a fastset, so intel_pre_plane_update() is executed but intel_fbc_can_flip_nuke() was not checking if FBC is now enabled in this CRTC leaving FBC active and causing the warning bellow in __intel_fbc_disable() [IGT] kms_frontbuffer_tracking: starting subtest fbc-1p-pri-indfb-multidraw Setting dangerous option enable_fbc - tainting kernel i915 0000:00:02.0: [drm:i915_edp_psr_debug_set [i915]] Setting PSR debug to f i915 0000:00:02.0: [drm:intel_psr_debug_set [i915]] Invalid debug mask f i915 0000:00:02.0: [drm:i915_edp_psr_debug_set [i915]] Setting PSR debug to 1 i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:215:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36 [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 138120KHz [drm:intel_dp_compute_config [i915]] Force DSC en = 0 [drm:intel_dp_compute_config [i915]] DP lane count 2 clock 270000 bpp 24 [drm:intel_dp_compute_config [i915]] DP link rate required 414360 available 540000 i915 0000:00:02.0: [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [CRTC:91:pipe A] enable: yes [fastset] i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] active: yes, output_types: EDP (0x100), output format: RGB i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] requested mode: [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] adjusted mode: [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa [drm:intel_dump_pipe_config [i915]] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080, pixel rate 138120 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] linetime: 119, ips linetime: 0 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0 [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1c001a5, cfgcr1: 0x8b, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] MST master transcoder: <invalid> i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] [PLANE:31:plane 1A] fb: [FB:262] 1920x1080 format = XR24 little-endian (0x34325258), visible: yes i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] rotation: 0x1, scaler: -1 i915 0000:00:02.0: [drm:intel_dump_pipe_config [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 i915 0000:00:02.0: [drm:intel_psr_disable_locked [i915]] Disabling PSR1 i915 0000:00:02.0: [drm:intel_ddi_update_pipe [i915]] Panel doesn't support DRRS ------------[ cut here ]------------ i915 0000:00:02.0: drm_WARN_ON(fbc->active) WARNING: CPU: 4 PID: 1175 at drivers/gpu/drm/i915/display/intel_fbc.c:973 __intel_fbc_disable+0xa5/0x130 [i915] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 mei_hdcp x86_pkg_temp_thermal coretemp crct10dif_pclmul snd_hda_intel crc32_pclmul snd_intel_dspcfg snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core cdc_ether e1000e usbnet mii snd_pcm ptp mei_me pps_core mei thunderbolt intel_lpss_pci prime_numbers CPU: 4 PID: 1175 Comm: kms_frontbuffer Tainted: G U 5.5.0-CI-Trybot_5651+ #1 Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019 RIP: 0010:__intel_fbc_disable+0xa5/0x130 [i915] Code: 8b 67 50 4d 85 e4 0f 84 8f 00 00 00 e8 44 33 30 e1 48 c7 c1 72 f6 4c a0 4c 89 e2 48 89 c6 48 c7 c7 42 f6 4c a0 e8 0b 9d ce e0 <0f> 0b eb 90 48 8b 7b 18 4c 8b 67 50 4d 85 e4 74 6d e8 15 33 30 e1 RSP: 0018:ffffc90000613b68 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8884799d0000 RCX: 0000000000000006 RDX: 0000000000001905 RSI: ffff888495dac970 RDI: ffffffff823731a1 RBP: ffff88847c05d000 R08: ffff888495dac970 R09: 0000000000000000 R10: ffffc90000613b88 R11: 0000000000000000 R12: ffff88849bba7e40 R13: ffff8884799d0000 R14: ffff888498564000 R15: 0000000000000000 FS: 00007f8157f08300(0000) GS:ffff8884a0000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdbfea2eb8 CR3: 000000049d1cc001 CR4: 0000000000760ee0 PKRU: 55555554 Call Trace: intel_fbc_disable+0x4a/0x50 [i915] intel_update_crtc+0x12c/0x1d0 [i915] skl_commit_modeset_enables+0x14d/0x600 [i915] intel_atomic_commit_tail+0x30d/0x1480 [i915] ? queue_work_on+0x31/0x70 ? intel_atomic_commit_ready+0x3f/0x48 [i915] ? __i915_sw_fence_complete+0x1a0/0x250 [i915] intel_atomic_commit+0x312/0x390 [i915] intel_psr_fastset_force+0x119/0x150 [i915] i915_edp_psr_debug_set+0x53/0x70 [i915] simple_attr_write+0xb0/0xd0 full_proxy_write+0x51/0x80 vfs_write+0xb9/0x1d0 ksys_write+0x9f/0xe0 do_syscall_64+0x4f/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f8157240281 Code: c3 0f 1f 84 00 00 00 00 00 48 8b 05 59 8d 20 00 c3 0f 1f 84 00 00 00 00 00 8b 05 8a d1 20 00 85 c0 75 16 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53 RSP: 002b:00007ffdbfea59d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8157240281 RDX: 0000000000000003 RSI: 00007f8157901152 RDI: 0000000000000008 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f8157901152 R13: 0000000000000008 R14: 00005589d298dce0 R15: 0000000000000000 irq event stamp: 55208 hardirqs last enabled at (55207): [<ffffffff8112f3fc>] vprintk_emit+0xcc/0x330 hardirqs last disabled at (55208): [<ffffffff81001ca0>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (54926): [<ffffffff81e00385>] __do_softirq+0x385/0x47f softirqs last disabled at (54915): [<ffffffff810ba15a>] irq_exit+0xba/0xc0 ---[ end trace afa50c52e5a512bb ]--- [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:215:eDP-1] i915 0000:00:02.0: [drm:intel_atomic_commit_tail [i915]] [CRTC:91:pipe A] [drm:intel_ddi_get_config [i915]] [ENCODER:214:DDI A] Fec status: 0 i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.150 [i915]] DPLL 0 v2: using intel_fbc_can_enable() instead of crtc_state->enable_fbc (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306185833.53984-1-jose.souza@intel.com
2020-03-06drm/i915: properly sanity check batch_start_offsetMatthew Auld
Check the edge case where batch_start_offset sits exactly on the batch size. v2: add new range_overflows variant to capture the special case where the size is permitted to be zero, like with batch_len. v3: other way around. the common case is the exclusive one which should just be >=, with that we then just need to convert the three odd ball cases that don't apply to use the new inclusive _end version. Testcase: igt/gem_exec_params/invalid-batch-start-offset Fixes: 0b5372727be3 ("drm/i915/cmdparser: Use cached vmappings") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200306094735.258285-1-matthew.auld@intel.com
2020-03-03drm/i915/vgpu: improve vgpu abstractionsJani Nikula
Add intel_vgpu_register() abstraction, rename i915_detect_vgpu() to intel_vgpu_detect() to match other function naming, un-inline intel_vgpu_active(), intel_vgpu_has_full_ppgtt() and intel_vgpu_has_huge_gtt() to reduce header interdependencies. The i915_vgpu.[ch] filename and intel_vgpu_ prefix discrepancy remains. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200227144408.24345-1-jani.nikula@intel.com
2020-02-04drm/i915/display/fbc: Make WARN* drm specific where drm_priv ptr is availablePankaj Bharadiya
drm specific WARN* calls include device information in the backtrace, so we know what device the warnings originate from. Covert all the calls of WARN* with device specific drm_WARN* variants in functions where drm_i915_private struct pointer is readily available. The conversion was done automatically with below coccinelle semantic patch. @rule1@ identifier func, T; @@ func(...) { ... struct drm_i915_private *T = ...; <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } @rule2@ identifier func, T; @@ func(struct drm_i915_private *T,...) { <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200128181603.27767-11-pankaj.laxminarayan.bharadiya@intel.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-27 18:02:09 +0000