summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_lvds.c
AgeCommit message (Collapse)Author
2022-03-31drm/i915: Put fixed modes directly onto the panel's fixed_modes listVille Syrjälä
Rather than having the connector init get the fixed mode back from intel_panel and then feed it straight back into intel_panel_init() let's just make the fixed mode lookup put the mode directly onto the panel's fixed_modes list. Avoids the pointless round trip and opens the door for further enhancements to the fixed mode handling. v2: Make the debug message correct by using intel_panel_drrs_type() (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220331112822.11462-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Extract intel_panel_encoder_fixed_mode()Ville Syrjälä
Apart from the EDID and VBT based mechanism we also sometimes use the encoder's current mode as the panel fixed mode. We currently have the same code for that duplicated in two places. Let's unify. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Rename intel_panel_vbt_fixed_mode()Ville Syrjälä
Rename intel_panel_vbt_fixed_mode() to intel_panel_vbt_lfp_fixed_mode() to be more descriptive. We'll have another VBT fixed mode function soon and we don't want to confuse the two. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Use intel_panel_preferred_fixed_mode() moreVille Syrjälä
Use intel_panel_preferred_fixed_mode() for all the orientation quirk setup and compute_is_dual_link_lvds()). All of these happen after intel_panel_init() so the panel fixed_mode list is already in place. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Use DRM_MODE_FMT+DRM_MODE_ARG()Ville Syrjälä
Replace all drm_mode_debug_printmodeline() calls with DRM_MODE_FMT+DRM_MODE_ARG(). Makes the debug output a bit more terse in places where we previously had a newline in the precedeing drm_dbg_kms(), and avoids anything else sneaking in between the two printk()s in all cases. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-29drm/i915: Pass intel_connector to intel_panel_{init,fini}()Ville Syrjälä
All the other intel_panel functions take struct intel_connector, so might as well make init()/fini() take one as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220323182935.4701-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-15drm/i915: Introduce intel_panel_get_modes()Ville Syrjälä
Several connectors want to return the fixed_mode from .get_modes(), add a helper to do that (and hide the details inside intel_panel.c). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-15drm/i915: Introduce intel_panel_{fixed,downclock}_mode()Ville Syrjälä
Abstract away the details on where we store the fixed/downclock modes, and also how we select them. Will be useful for static DRRS (aka. allowing the user to select the refresh rate for the panel). We pass in the user requested mode to intel_panel_fixed_mode() so that in the future it may try to match the refresh rate. And intel_panel_downclock_mode() gets passed the adjusted_mode we actually chose to use so that it may find a suitable lower resresh rate variant. v2: Hook it up for all encoders s/fixed_mode/adjusted_mode/ in intel_panel_downclock_mode() (Jani) Elaborate on the choice or arguments for the functions (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-03-15drm/i915/lvds: Pass fixed_mode to compute_is_dual_link_lvds()Ville Syrjälä
We want to eventually get rid of the connector->panel.fixed_mode pointer so avoid using it during LVDS setup. Since this all happens during the encoder init we already have the fixed_mode around, just pass that in. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220311172428.14685-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-10-01drm/i915/dpll: move dpll modeset asserts to intel_dpll.cJani Nikula
Keep the functionality and the assert code together. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0229659fb8af6c91c774408c6f7bb8c4ff8735e3.1632992608.git.jani.nikula@intel.com
2021-10-01drm/i915/fdi: move fdi modeset asserts to intel_fdi.cJani Nikula
Keep the functionality and the assert code together. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/427d27eb4e5daca208d496d6c2ffc91ed90ba714.1632992608.git.jani.nikula@intel.com
2021-09-30drm/i915: Introduce intel_panel_compute_config()Ville Syrjälä
Let's introduce a compute_config() helper for fixed mode panels. For now all it does is the fixed_mode->adjusted_mode copy. Note that with sDVO we have to ask the external encoder chip to spit out our actual display timings for us, so the fixed_mode to adjusted_mode copy done by intel_panel_compute_config() is redundant, but we still want to use it to do other checks for us later. We'll be fine so long as we only call it before intel_sdvo_get_preferred_input_mode() overwrites adjusted_mode with the timings from the encoder. v2: Use intel_panel_compute_config() with sDVO Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210927185207.13620-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-09-30drm/i915: Use intel_panel_mode_valid() for DSI/LVDS/(s)DVOVille Syrjälä
All fixed mode panels should behave the same way when it comes to mode filtering. Reuse the intel_panel_mode_valid() for all of them. This changes the behaviour to match what we do for eDP, ie. reject anything that doesn't exactly match the fixed mode dimensions. Users can still manually provide different sized modes which will be handled by the panel fitter just as before. The difference is that we can no longer report funny modes in the connector's mode list. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210923200109.4459-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2021-08-26drm/i915/panel: mass rename functions to have intel_panel_ prefixJani Nikula
Follow the usual naming conventions. Also pull HAS_GMCH() check to intel_panel_fitting(). No functional changes. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/9ff6e42e377bdb0c9349f50d9ea79671059633c7.1629888677.git.jani.nikula@intel.com
2021-08-26drm/i915/backlight: mass rename functions to have intel_backlight_ prefixJani Nikula
Follow the usual naming conventions. As a drive-by cleanup, also pass intel_connector instead of drm_connector to intel_backlight_setup(). No functional changes. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ea1c22370210abdd4f5547af73c71b902061ea50.1629888677.git.jani.nikula@intel.com
2021-08-26drm/i915/backlight: extract backlight code to a separate fileJani Nikula
In a long overdue refactoring, split out backlight code to new intel_backlight.[ch]. Simple code movement, leave renames for follow-up work. No functional changes. Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/97d310848f03061473b9b2328e2c5c4dcf263cfa.1629888677.git.jani.nikula@intel.com
2021-06-24drm/i915: s/intel_crtc/crtc/Ville Syrjälä
Clear out the straggler 'intel_crtc' variables. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-7-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2021-05-05drm/i915: Don't include intel_de.h from intel_display_types.hVille Syrjälä
Hoist the intel_de.h include from intel_display_types.h one level up. I need this in order to untangle the include order so that I can add tracepoints into intel_de.h. This little cocci script did most of the work for me: @find@ @@ ( intel_de_read(...) | intel_de_read_fw(...) | intel_de_write(...) | intel_de_write_fw(...) ) @has_include@ @@ ( #include "intel_de.h" | #include "display/intel_de.h" ) @depends on find && !has_include@ @@ + #include "intel_de.h" #include "intel_display_types.h" @depends on find && !has_include@ @@ + #include "display/intel_de.h" #include "display/intel_display_types.h" Cc: Cooper Chiou <cooper.chiou@intel.com> Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com
2021-04-14drm/i915/display: rename display version macrosLucas De Marchi
While converting the rest of the driver to use GRAPHICS_VER() and MEDIA_VER(), following what was done for display, some discussions went back on what we did for display: 1) Why is the == comparison special that deserves a separate macro instead of just getting the version and comparing directly like is done for >, >=, <=? 2) IS_DISPLAY_RANGE() is weird in that it omits the "_VER" for brevity. If we remove the current users of IS_DISPLAY_VER(), we could actually repurpose it for a range check With (1) there could be an advantage if we used gen_mask since multiple conditionals be combined by the compiler in a single and instruction and check the result. However a) INTEL_GEN() doesn't use the mask since it would make the code bigger everywhere else and b) in the cases it made sense, it also made sense to convert to the _RANGE() variant. So here we repurpose IS_DISPLAY_VER() to work with a [ from, to ] range like was the IS_DISPLAY_RANGE() and convert the current IS_DISPLAY_VER() users to use == and != operators. Aside from the definition changes, this was done by the following semantic patch: @@ expression dev_priv, E1; @@ - !IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) != E1 @@ expression dev_priv, E1; @@ - IS_DISPLAY_VER(dev_priv, E1) + DISPLAY_VER(dev_priv) == E1 @@ expression dev_priv, from, until; @@ - IS_DISPLAY_RANGE(dev_priv, from, until) + IS_DISPLAY_VER(dev_priv, from, until) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> [Jani: Minor conflict resolve while applying.] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210413051002.92589-4-lucas.demarchi@intel.com
2021-03-23drm/i915/display: Eliminate most usage of INTEL_GEN()Matt Roper
Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN() in the display code to use DISPLAY_VER() comparisons instead. The following semantic patch was used: @@ expression dev_priv, E; @@ - INTEL_GEN(dev_priv) == E + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; @@ - INTEL_GEN(dev_priv) + DISPLAY_VER(dev_priv) @@ expression dev_priv; expression E; @@ - IS_GEN(dev_priv, E) + IS_DISPLAY_VER(dev_priv, E) @@ expression dev_priv; expression from, until; @@ - IS_GEN_RANGE(dev_priv, from, until) + IS_DISPLAY_RANGE(dev_priv, from, until) There are still some display-related uses of INTEL_GEN() in intel_pm.c (watermark code) and i915_irq.c. Those will be updated separately. v2: - Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers. (Jani) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com
2020-10-09drm/i915: Wait for LVDS panel power cycle delay on rebootVille Syrjälä
Just like with eDP let's wait for the power sequencer power cycle delay before we reboot the machine, as otherwise we can't guarantee the panel's minimum power cycle delay will be respected. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201001151640.14590-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-09-15drm/i915: Reduce INTEL_DISPLAY_ENABLED to just treat outputs as disconnectedVille Syrjälä
Since the display hardware is all there even when INTEL_DISPLAY_ENABLED return false we have to be capable of shutting it down cleanly so as to not anger the hw. To that end let's reduce the effect of !INTEL_DISPLAY_ENABLE to just treating all outputs as disconnected. Should prevent anyone from automagically enabling any of them, while still allowing us to cleanly shut them down. v2: Put the check into the right place for CRT Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200910164256.25983-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2020-06-22drm/i915/params: switch to device specific parametersJani Nikula
Start using device specific parameters instead of module parameters for most things. The module parameters become the immutable initial values for i915 parameters. The device specific parameters in i915->params start life as a copy of i915_modparams. Any later changes are only reflected in the debugfs. The stragglers are: * i915.force_probe and i915.modeset. Needed before dev_priv is available. This is fine because the parameters are read-only and never modified. * i915.verbose_state_checks. Passing dev_priv to I915_STATE_WARN and I915_STATE_WARN_ON would result in massive and ugly churn. This is handled by not exposing the parameter via debugfs, and leaving the parameter writable in sysfs. This may be fixed up in follow-up work. * i915.inject_probe_failure. Only makes sense in terms of the module, not the device. This is handled by not exposing the parameter via debugfs. v2: Fix uc i915 lookup code (Michał Winiarski) Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com> Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200618150402.14022-1-jani.nikula@intel.com
2020-04-24drm/i915: Have pfit calculations return an error codeVille Syrjälä
Change intel_{gmch,pch}_panel_fitting() to return a normal error vs. success int. We'll need this later to validate that the margin properties aren't misconfigured. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-6-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
2020-04-24drm/i915: Pass connector state to pfit calculationsVille Syrjälä
Pass the entire connector state to intel_{gmch,pch}_panel_fitting(). For now we just need to get at .scaling_mode but in the future we'll want access to the margin properties as well. v2: Deal with intel_dp_ycbcr420_config() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-5-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
2020-04-24drm/i915: s/pipe_config/crtc_state/ in pfit functionsVille Syrjälä
Follow the new naming convention and call the crtc state "crtc_state", and while at it drop the redundant crtc argument. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200422161917.17389-4-ville.syrjala@linux.intel.com Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
2020-04-03drm/i915: Pass atomic state to encoder hooksVille Syrjälä
We're going to want access to the atomic state for iterating the slave crtcs when enabling the port sync master crtc. Pass the atomic state all the way down. The alternative would be yet another encoder hook which we'll have to call after all the normal modeset stuff is done. Not really a fan of yet another hook just for this. Note that during readout state sanitation we are now going to pass NULL as the atomic state since we don't have one. We need to change that and then we can also s/crtc_state/crtc/ and s/conn_state/conn/ for the encoder hooks as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200313164831.5980-13-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-03-11drm/i915/lvds: convert to drm_device based logging macros.Wambui Karuga
Converts various instances of the printk based drm logging macros to the struct drm_device based logging macros in i915/display/intel_lvds.c. This transformation was done by the following coccinelle script that matches based on the existence of a drm_i915_private device: @@ identifier fn, T; @@ fn(...,struct drm_i915_private *T,...) { <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } @@ identifier fn, T; @@ fn(...) { ... struct drm_i915_private *T = ...; <+... ( -DRM_INFO( +drm_info(&T->drm, ...) | -DRM_ERROR( +drm_err(&T->drm, ...) | -DRM_WARN( +drm_warn(&T->drm, ...) | -DRM_DEBUG( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_KMS( +drm_dbg_kms(&T->drm, ...) | -DRM_DEBUG_DRIVER( +drm_dbg(&T->drm, ...) | -DRM_DEBUG_ATOMIC( +drm_dbg_atomic(&T->drm, ...) ) ...+> } New checkpatch warnings were fixed manually. Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e622ebd2ce07291f2db56174a0a0b31cc2df67df.1583766715.git.jani.nikula@intel.com
2020-02-27drm/i915: significantly reduce the use of <drm/i915_drm.h>Jani Nikula
The #include has been splattered all over the place, but there are precious few places, all .c files, that actually need it. v2: remove leftover double newlines Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200225133131.3301-1-jani.nikula@intel.com
2020-02-04drm/i915/display: Make WARN* drm specific where drm_device ptr is availablePankaj Bharadiya
drm specific WARN* calls include device information in the backtrace, so we know what device the warnings originate from. Covert all the calls of WARN* with device specific drm_WARN* variants in functions where drm_device or drm_i915_private struct pointer is readily available. The conversion was done automatically with below coccinelle semantic patch. checkpatch errors/warnings are fixed manually. @rule1@ identifier func, T; @@ func(...) { ... struct drm_device *T = ...; <... ( -WARN( +drm_WARN(T, ...) | -WARN_ON( +drm_WARN_ON(T, ...) | -WARN_ONCE( +drm_WARN_ONCE(T, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(T, ...) ) ...> } @rule2@ identifier func, T; @@ func(struct drm_device *T,...) { <... ( -WARN( +drm_WARN(T, ...) | -WARN_ON( +drm_WARN_ON(T, ...) | -WARN_ONCE( +drm_WARN_ONCE(T, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(T, ...) ) ...> } @rule3@ identifier func, T; @@ func(...) { ... struct drm_i915_private *T = ...; <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } @rule4@ identifier func, T; @@ func(struct drm_i915_private *T,...) { <+... ( -WARN( +drm_WARN(&T->drm, ...) | -WARN_ON( +drm_WARN_ON(&T->drm, ...) | -WARN_ONCE( +drm_WARN_ONCE(&T->drm, ...) | -WARN_ON_ONCE( +drm_WARN_ON_ONCE(&T->drm, ...) ) ...+> } Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200128181603.27767-20-pankaj.laxminarayan.bharadiya@intel.com
2020-01-27drm/i915/lvds: use intel_de_*() functions for register accessJani Nikula
The implicit "dev_priv" local variable use has been a long-standing pain point in the register access macros I915_READ(), I915_WRITE(), POSTING_READ(), I915_READ_FW(), and I915_WRITE_FW(). Replace them with the corresponding new display engine register accessors intel_de_read(), intel_de_write(), intel_de_posting_read(), intel_de_read_fw(), and intel_de_write_fw(). No functional changes. Generated using the following semantic patch: @@ expression REG, OFFSET; @@ - I915_READ(REG) + intel_de_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - POSTING_READ(REG) + intel_de_posting_read(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE(REG, OFFSET) + intel_de_write(dev_priv, REG, OFFSET) @@ expression REG; @@ - I915_READ_FW(REG) + intel_de_read_fw(dev_priv, REG) @@ expression REG, OFFSET; @@ - I915_WRITE_FW(REG, OFFSET) + intel_de_write_fw(dev_priv, REG, OFFSET) Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/75c2aa6ff0f0aa744de006c0bd6e33fb91b20994.1579871655.git.jani.nikula@intel.com
2019-11-01drm/i915: Perform automated conversions for crtc uapi/hw split, base -> uapi.Maarten Lankhorst
Split up crtc_state->base to uapi. This is done using the following patch, ran after the previous commit that splits out any hw references: @@ struct intel_crtc_state *T; @@ -T->base +T->uapi Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-5-maarten.lankhorst@linux.intel.com
2019-11-01drm/i915: Perform automated conversions for crtc uapi/hw split, base -> hw.Maarten Lankhorst
Split up crtc_state->base to hw where appropriate. This is done using the following patch: @@ struct intel_crtc_state *T; identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$"; @@ -T->base.x +T->hw.x @@ struct drm_crtc_state *T; identifier x =~ "^(active|enable|degamma_lut|gamma_lut|ctm|mode|adjusted_mode)$"; @@ -to_intel_crtc_state(T)->base.x +to_intel_crtc_state(T)->hw.x Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191031112610.27608-4-maarten.lankhorst@linux.intel.com
2019-10-31drm/i915: Simplify pipe_mask setup even furtherVille Syrjälä
Just set pipe_mask=~0 for the non-special cases where any pipe will do. intel_encoder_possible_crtcs() will anyway drop out anything that doesn't exist. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-5-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2019-10-31drm/i915: s/crtc_mask/pipe_mask/Ville Syrjälä
Rename the encoder->crtc_mask to encoder->pipe_mask to better reflect what it actually contains. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-3-ville.syrjala@linux.intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2019-10-31drm/i915: Simplify LVDS crtc_mask setupVille Syrjälä
We don't need to special case PCH vs. gen4 when setting up the LVDS crtc_mask. Just claim pipes A|B|C work and intel_encoder_possible_crtcs() will drop out any crtc that doesn't exist. v2: Put the special case first to match what most other encoders do Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191002162505.30716-2-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
2019-10-02drm/i915: Clean up encoder->crtc_mask setupVille Syrjälä
Use BIT(pipe) for better legibility when populating the crtc_mask for encoders. Also remove the redundant possible_crtcs setup for the TV encoder. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190708162048.4286-11-ville.syrjala@linux.intel.com
2019-08-23drm/i915: Use enum pipe consistentlyVille Syrjälä
Replace all "int pipe"s with "enum pipe pipe"s to make it clear what we're dealing with. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2019-08-16drm/i915: Wrappers for display register waitsDaniele Ceraolo Spurio
To reduce the number of explicit dev_priv->uncore calls in the display code ahead of the introduction of dev_priv->de_uncore, this patch introduces a wrapper for one of the main usages of it, the register waits. When we transition to the new uncore, we can just update the wrapper to point to the appropriate structure. Since the vast majority of waits are on a set or clear of a bit or mask, add set & clear flavours of the wrapper to simplify the code. Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-7-daniele.ceraolospurio@intel.com
2019-08-07drm/i915: rename intel_drv.h to display/intel_display_types.hJani Nikula
Everything about the file is about display, and mostly about types related to display. Move under display/ as intel_display_types.h to reflect the facts. There's still plenty to clean up, but start off with moving the file where it logically belongs and naming according to contents. v2: fix the include guard name in the renamed file Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190806113933.11799-1-jani.nikula@intel.com
2019-06-17drm/i915: move modesetting output/encoder code under display/Jani Nikula
Add a new subdirectory for display code, and start off by moving modesetting output/encoder code. Judging by the include changes, this is a surprisingly clean operation. v2: - move intel_sdvo_regs.h too - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-2-jani.nikula@intel.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-26 11:23:44 +0000