summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display/intel_pps.c
AgeCommit message (Collapse)Author
2024-12-09drm/i915/pps: include panel power cycle delay in debugfsJani Nikula
The debugfs contains all the other timings except panel power cycle delay. Add it for completeness. Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360 Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241205123720.3278727-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-12-09drm/i915/pps: debug log the remaining power cycle delay to waitJani Nikula
While pps_init_delays() debug logs the power cycle delay, also debug log the actual remaining time to wait in wait_panel_power_cycle(). Note that this still isn't the full picture; the power sequencer may still wait after this one. Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13007 Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 Link: https://patchwork.freedesktop.org/patch/msgid/20241204160048.2774419-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-12-02drm/i915/display: convert power wells to struct intel_displayJani Nikula
Going forward, struct intel_display is the main device data structure for display. Switch the power well code over to it. v2: Fix parenthesis alignment Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b8c0ff5502a5df55ec7a160d90257c6f2befc0b6.1732808222.git.jani.nikula@intel.com
2024-11-28drm/i915/pps: Eliminate pointless get_delay() macroVille Syrjälä
Now that we have pps_units_to_msecs(), get_delay() looks rather pointless. Nuke it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-11-28drm/i915/pps: Extract pps_units_to_msecs()Ville Syrjälä
Add pps_units_to_msecs() as the counterpart to msecs_pps_units_to(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-11-28drm/i915/pps: Extract msecs_to_pps_units()Ville Syrjälä
Replace all the hand rolled *10 stuff with something a bit more descriptive (msecs_to_pps_units()). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-11-28drm/i915/pps: Spell out the eDP spec power sequencing delays a bit more clearlyVille Syrjälä
We determine the "spec" eDP power sequencing delays by referencing some max values from the eDP spec. Write out each number from the spec explicitly instead of precomputing the final number (that's the job of the computer). Makes it a bit easier to see what the supposed spec defined numbers actually are. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-11-28drm/i915/pps: Rename intel_pps_delay membersVille Syrjälä
Stop using the semi-random eDP spec T1,T3,... names for the power sequencing delays, and instead call them by their human readable names. Much easier to keep track what delay goes where when you don't have to constantly cross reference against the eDP spec. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-11-28drm/i915/pps: Decouple pps delays from VBT struct definitionVille Syrjälä
We currently lack a proper struct definition for the VBT power squencing delays, and instead we use the same struct definition (in intel_bios.h) for both the VBT layout and our driver side state. Decouple those two things by moving the current struct into intel_vbt_defs.h and adding a new one for the driver's use. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-11-28drm/i915/pps: Store the power cycle delay without the +1Ville Syrjälä
The code initializing the power sequencing delays is a bit hard to follow. One confusing thing is that we keep doing the +/-1 adjustment for the hardware register value in several places. Simplify this a bit by doing the adjustment only when reading or writing the actual register. This also matches how the LVDS code does things. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241106215859.25446-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-10-31drm/i915/dp: Track source OUI validity explicitlyImre Deak
While updating the source OUI on the sink the driver should avoid writing the OUI if it's already up-to-date to prevent the sink from resetting itself in response to the update. On eDP - the only output type where the OUI was updated so far - the driver ensured this by comparing the current source OUI DPCD register values with the expected Intel OUI value, skipping the update in case of a match. On some non-eDP sinks - at least on Synaptics branch devices - this method doesn't work, since the source OUI DPCD registers read back as all 0, even after updating the registers. Handle the above kind of sinks by tracking when the OUI was updated and so should be valid, regardless of what the DPCD registers contain. eDP sinks reset the written source OUI value when the panel power is disabled, invalidate the OUI state accordingly. This is required by a follow-up patch updating the source OUI for non-eDP sink types as well. v2: Fix setting intel_dp::oui_valid=true, if the DPCD register contains already the expected value. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-5-imre.deak@intel.com
2024-10-31drm/i915/dp: Ensure panel power remains enabled during connector detectionImre Deak
The sink's capabilities, like the DSC caps, depend on the source OUI written to the sink's DPCD registers and so this OUI value should be valid for the whole duration of the detection. An eDP sink will reset this OUI value when the panel power is disabled, so prevent the disabling - happening by default after a 1 sec idle period - for the whole duration of detection. v2: Update the documentation for intel_pps_on(). (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241025160259.3088727-3-imre.deak@intel.com
2024-10-30drm/i915/pps: use display->platform.<platform> instead of IS_<PLATFORM>()Jani Nikula
Switch to using the new display->platform.<platform> members for platform identification in display code. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/05de39ea5ef3898c115cc4f3725f58116d285339.1730144869.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-29drm/i915/display: convert I915_STATE_WARN() to struct intel_displayJani Nikula
Convert I915_STATE_WARN() to struct intel_display *, and rename to INTEL_DISPLAY_STATE_WARN(). Do some minor opportunistic struct drm_i915_private to struct intel_display conversions while at it. v2: crtc_state may be NULL in intel_connector_verify_state() Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241024162510.2410128-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-10-28drm/i915: Use string enable/disable choice helpersSai Teja Pottumuttu
Replace the last few remaining instances of string enable(d)/disable(d) choices with the linux string choice helpers to avoid further cocci warnings. Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241023054655.4017489-1-sai.teja.pottumuttu@intel.com
2024-10-04drm/i915: use NULL for zero wakeref_t instead of plain integer 0Jani Nikula
As of commit 2edc6a75f26c ("drm/i915: switch intel_wakeref_t underlying type to struct ref_tracker *") we gained quite a few sparse warnings about "Using plain integer as NULL pointer" for using 0 to initialize wakeref_t. Switch to NULL everywhere. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241002181655.582597-1-jani.nikula@intel.com
2024-09-23drm/i915/pps: split intel_pps_reset_all() to vlv and bxt variantsJani Nikula
The intel_pps_reset_all() function does similar but not quite the same things for VLV/CHV and BXT/GLK. Observe that it's called from platform specific code only, and a split to two functions vlv_pps_reset_all() and bxt_pps_reset_all() is natural. Remove the platform checks and warnings from the functions. We don't usually have them, unless we're unsure. To make this easier to reason about for BXT/GLK, change the condition on caller side from "!PCH" to "BXT || GLK". Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240919090427.1859032-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-19drm/i915/pps: move vlv_active_pipe() to intel_pps.cJani Nikula
All the users for vlv_active_pipe() are within intel_pps.c now, and there are already uses of g4x_dp_port_enabled() and intel_dp->output_reg in there, so seems fine to reduce interfaces and move vlv_active_pipe() to intel_pps.c too. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e12ae0a931f113f3bbbf1b4c66108b572a933efb.1726681620.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-19drm/i915/pps: add vlv_pps_backlight_initial_pipe()Jani Nikula
Add vlv_pps_backlight_initial_pipe() and move the VLV/CHV initial backlight pipe logic there, hiding the PPS pipe details inside PPS code. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b0587f183d8bb06679a75b04f956762435d10181.1726681620.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-19drm/i915/pps: rename vlv_pps_init() to vlv_pps_port_enable_unlocked()Jani Nikula
Follow the naming for vlv_pps_port_disable(), as these are counterparts, and add _unlocked suffix as it assumes the pps lock is held. v2: Add _unlocked suffix (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3b21141025a5e1e67f28bbe67a82a7008fd3f415.1726681620.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-19drm/i915/pps: add vlv_pps_port_disable()Jani Nikula
Add vlv_pps_port_disable() and move the VLV/CHV active pipe clear there from intel_dp_link_down(), hiding the PPS pipe details inside PPS code. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2546716a448205ca5af085cec9faeb5e5deac287.1726681620.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-19drm/i915/pps: add vlv_pps_pipe_reset()Jani Nikula
We need to track PPS also for non-eDP usage on VLV/CHV. Add new vlv_pps_pipe_reset() for resetting the related parts, hiding the PPS pipe details inside PPS code. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/e1bae913533baea8e502d8c63c06f6852a1cdb93.1726681620.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-19drm/i915/pps: add vlv_pps_pipe_init()Jani Nikula
We need to track PPS also for non-eDP usage on VLV/CHV. Add new vlv_pps_pipe_init() for initializing the related parts, hiding the PPS pipe details inside PPS code. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2829a5bab5e9a4dcddc3a2bb87e12559000543ea.1726681620.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-19drm/i915/pps: only touch the vlv_ members on VLV/CHVJani Nikula
While the struct intel_pps vlv_pps_pipe and vlv_active_pipe members are only relevant for VLV/CHV, we still initialize them on all platforms and check them on BXT/GLK. Wrap all access inside VLV/CHV checks for consistency. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/158c7b30e56d22aa3f9c9e51e87b9d89687d74d5.1726681620.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-19drm/i915/pps: add bxt_ prefix to pps_resetJani Nikula
The pps_reset member of struct intel_pps is only relevant on BXT/GLK. Prefix it with bxt_. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7d4552f555936be44fae27ca101007746fcff8c2.1726681620.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-19drm/i915/pps: add vlv_ prefix to pps_pipe and active_pipe membersJani Nikula
The pps_pipe and active_pipe members of struct intel_pps are only relevant on VLV/CHV. Prefix them with vlv_. Note that there are still a few cases where they're accessed on non-VLV/CHV paths. We'll fix them separately. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0e9a8998fc37796eb6f32692977859807222ce0a.1726681620.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-09-05drm/i915/display: include media/cec-notifier.h and linux/debugfs.h where neededJani Nikula
Use a forward declaration for struct cec_notifier instead of including media/cec-notifier.h in intel_display_types.h, and only include it where needed. Also realize that a lot of places depend on including linux/debugfs.h via intel_display_types.h -> media/cec-notifier.h -> media/cec.h, and include that too where needed. v2: hsw_ips.c also needs debugfs.h (kernel test robot) Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240827104521.4151471-1-jani.nikula@intel.com
2024-09-03drm/i915/pps: convert intel_pps.[ch] to struct intel_displayJani Nikula
Going forward, struct intel_display shall replace struct drm_i915_private as the main display device data pointer type. Convert intel_pps.[ch] to struct intel_display. Some stragglers are left behind where needed. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bea51b0d9e4546ba21d0d4eb01ca1097fda095ab.1725012870.git.jani.nikula@intel.com
2024-09-03drm/i915/pps: pass intel_dp to pps_name()Jani Nikula
Currently all of intel_pps.c passes struct intel_dp around. Do the same with pps_name() instead of passing both struct drm_i915_private and struct intel_pps. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f2a7fec4a2ff1f09cb73e6734604fae99ab6b11a.1725012870.git.jani.nikula@intel.com
2024-08-21drm/i915: move rawclk from runtime to display runtime infoJani Nikula
It's mostly about display, so move it under display. This should also fix rawclk freq initialization in the xe driver. v2: Change the init location Link: https://lore.kernel.org/r/20240819133138.147511-2-maarten.lankhorst@linux.intel.com Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/39330d09c48509e013f01fd0247a9b7c291173e2.1724144570.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-08-15drm/i915/pps: Disable DPLS_GATING around pps sequenceSuraj Kandpal
Disable bit 29 of SCLKGATE_DIS register around pps sequence when we turn panel power on. --v2 -Squash two commit together [Jani] -Use IS_DISPLAY_VER [Jani] -Fix multiline comment [Jani] --v3 -Define register in a more appropriate place [Mitul] --v4 -Register is already defined no need to define it again [Ville] -Use correct WA number (lineage no.) [Dnyaneshwar] -Fix the range on which this WA is applied [Dnyaneshwar] Bspec: 49304 Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240813042807.4015214-1-suraj.kandpal@intel.com
2024-08-05drm/i915/display: correct dual pps handling for MTL_PCH+Dnyaneshwar Bhadane
On the PCH side the second PPS was introduced in ICP+.Add condition On MTL_PCH and greater platform also having the second PPS. Note that DG1/2 south block only has the single PPS, so need to exclude the fake DG1/2 PCHs Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11488 Fixes: 93cbc1accbce ("drm/i915/mtl: Add fake PCH for Meteor Lake") Cc: <stable@vger.kernel.org> # v6.9+ Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240801111141.574854-1-dnyaneshwar.bhadane@intel.com
2024-06-07drm/i915: pass dev_priv explicitly to DPLLJani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the DPLL register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7deea1d86c2706994450ec938f8f174a2ac54d27.1717514638.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-28drm/i915: pass dev_priv explicitly to PP_DIVISORJani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PP_DIVISOR register macro. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/28e9f7e3570c15ac5c229048ec0def2e4a667ffc.1716806471.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-28drm/i915: pass dev_priv explicitly to PP_OFF_DELAYSJani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PP_OFF_DELAYS register macro. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/122e143ff6a1c1016534dae0ba28fde0b15e3e76.1716806471.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-28drm/i915: pass dev_priv explicitly to PP_ON_DELAYSJani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PP_ON_DELAYS register macro. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0fc707fde15bc11893b6e1d5038162368e3a2b8d.1716806471.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-28drm/i915: pass dev_priv explicitly to PP_CONTROLJani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PP_CONTROL register macro. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/01024887af682d4c9ddfb440af98284c44422df7.1716806471.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-05-28drm/i915: pass dev_priv explicitly to PP_STATUSJani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PP_STATUS register macro. Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7b76be10723f36d6e1b45be76d112a4b178ef493.1716806471.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-18drm/i915/quirks: convert struct drm_i915_private to struct intel_displayJani Nikula
Use struct intel_display instead of struct drm_i915_private for quirks. Also do drive-by conversions in call sites of intel_has_quirk(). Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d90e9d8e91e59d04d38f2743c02c74a8f0e13133.1713358679.git.jani.nikula@intel.com
2024-04-10drm/i915/pps: move pps debugfs file to intel_pps.cJani Nikula
Continue with placing debugfs next to the implementation. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408094357.3085319-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-03-26drm/i915/de: register wait function renamesJani Nikula
Do some renames on the register wait functions for clarity and brevity: intel_de_wait_for_register -> intel_de_wait intel_de_wait_for_register_fw -> intel_de_wait_fw __intel_de_wait_for_register -> intel_de_wait_custom In particular, it seemed odd to have a double-underscored function be called in a number of places. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240320160123.2904609-1-jani.nikula@intel.com
2024-01-03drm/i915/mtl: Add fake PCH for Meteor LakeHaridhar Kalvala
Correct the implementation trying to detect MTL PCH with the MTL fake PCH id. On MTL, both the North Display (NDE) and South Display (SDE) functionality reside on the same die (the SoC die in this case), unlike many past platforms where the SDE was on a separate PCH die. The code is (badly) structured today in a way that assumes the SDE is always on the PCH for modern platforms, so on platforms where we don't actually need to identify the PCH to figure out how the SDE behaves (i.e., all DG1/2 GPUs as well as MTL and LNL),we've been assigning a "fake PCH" as a quickhack that allows us to avoid restructuring a bunch of the code.we've been assigning a "fake PCH" as a quick hack that allows us to avoid restructuring a bunch of the code. Removed unused macros of LNL amd MTL as well. v2: Reorder PCH_MTL conditional check (Matt Roper) Reverting to PCH_MTL for PICA interrupt(Matt Roper) Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231219185233.1469675-1-haridhar.kalvala@intel.com
2023-11-17drm/i915: add vlv_pipe_to_phy() helper to replace DPIO_PHY()Jani Nikula
Add a helper with better typing and handing for bogus input, and better in line with vlv_dig_port_to_channel(), vlv_dig_port_to_phy(), and vlv_pipe_to_channel(). Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231114104534.4180144-2-jani.nikula@intel.com
2023-06-10drm/i915: add a dedicated workqueue inside drm_i915_privateLuca Coelho
In order to avoid flush_scheduled_work() usage, add a dedicated workqueue in the drm_i915_private structure. In this way, we don't need to use the system queue anymore. This change is mostly mechanical and based on Tetsuo's original patch[1]. v6 by Jani: - Also create unordered_wq for mock device Link: https://patchwork.freedesktop.org/series/114608/ [1] Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c816ebe17ef08d363981942a096a586a7658a65e.1686231190.git.jani.nikula@intel.com
2023-05-15drm/i915/display: add i915 parameter to I915_STATE_WARN()Jani Nikula
Add i915 parameter to I915_STATE_WARN() and use device based logging. Done using cocci + hand edited where there was no i915 local variable ready. v2: avoid null deref in verify_connector_state() Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512181658.1735594-1-jani.nikula@intel.com
2023-04-18drm/i915/pps: use intel_de_rmw() for panel unlockJani Nikula
Use rmw where needed. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230417085742.793379-1-jani.nikula@intel.com
2023-03-30drm/i915/pps: split out PPS regs to a separate fileJani Nikula
Clean up i915_reg.h by splitting out PPS regs to display/intel_pps_regs.h. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/80d66ee6d7e56153a0ab25640ac2dad239b1ef6e.1678973282.git.jani.nikula@intel.com
2023-02-16drm/i915/display/panel: use intel_de_rmw if possible in panel related codeAndrzej Hajda
The helper makes the code more compact and readable. Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230105131046.2173431-7-andrzej.hajda@intel.com
2023-01-31drm/i915/lvds: Extract intel_lvds_regs.hVille Syrjälä
Extract the integrated LVDS port register definitions into their own header file. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230130180540.8972-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-12-09drm/i915: Improve PPS debugsVille Syrjälä
Always include both the encoder and PPS instance information in the debug prints so that we know what piece of hardware we're actually dealing with. v2: Make sure pps is selected before debug prints/etc. in intel_pps_vdd_on_unlocked() on vlv/chv There is no pps on pipe C on chv v3: Allow PPS=INVALID_PIPE for vlv/chv Cc: Animesh Manna <animesh.manna@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221127155239.26973-1-ville.syrjala@linux.intel.com Reviewed-by: Animesh Manna <animesh.manna@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-02 16:58:07 +0000