summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
2020-12-04drm/i915/gt: Cancel the preemption timeout on responding to itChris Wilson
We currently presume that the engine reset is successful, cancelling the expired preemption timer in the process. However, engine resets can fail, leaving the timeout still pending and we will then respond to the timeout again next time the tasklet fires. What we want is for the failed engine reset to be promoted to a full device reset, which is kicked by the heartbeat once the engine stops processing events. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168 Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-2-chris@chris-wilson.co.uk
2020-12-04drm/i915/gt: Ignore repeated attempts to suspend request flow across resetChris Wilson
Before reseting the engine, we suspend the execution of the guilty request, so that we can continue execution with a new context while we slowly compress the captured error state for the guilty context. However, if the reset fails, we will promptly attempt to reset the same request again, and discover the ongoing capture. Ignore the second attempt to suspend and capture the same request. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168 Fixes: 32ff621fd744 ("drm/i915/gt: Allow temporary suspension of inflight requests") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.7+ Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-1-chris@chris-wilson.co.uk
2020-12-04drm/i915/gem: Propagate error from cancelled submit due to context closureChris Wilson
In the course of discovering and closing many races with context closure and execbuf submission, since commit 61231f6bd056 ("drm/i915/gem: Check that the context wasn't closed during setup") we started checking that the context was not closed by another userspace thread during the execbuf ioctl. In doing so we cancelled the inflight request (by telling it to be skipped), but kept reporting success since we do submit a request, albeit one that doesn't execute. As the error is known before we return from the ioctl, we can report the error we detect immediately, rather than leave it on the fence status. With the immediate propagation of the error, it is easier for userspace to handle. Fixes: 61231f6bd056 ("drm/i915/gem: Check that the context wasn't closed during setup") Testcase: igt/gem_ctx_exec/basic-close-race Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.7+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201203103432.31526-1-chris@chris-wilson.co.uk
2020-12-03drm/i915: Add VRR_CTL_LINE_COUNT field to VRR_CTL register defManasi Navare
VRR_CTL register only had a GENMASK but no field prep define for TRANS_VRR_CTL_LINE_COUNT field so add that Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201202182727.26158-1-manasi.d.navare@intel.com
2020-12-03drm/i915/gem: Spring clean debugfsChris Wilson
Throw away all the debugfs entries that are not being actively used for debugging/developing IGT. Note that a couple of these are already and will remain available under the gt/ Files removed: i915_gem_fence_regs i915_gem_interrupt i915_ring_freq_table i915_context_status i915_llc i915_shrinker_info Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201202112140.16759-1-chris@chris-wilson.co.uk
2020-12-03drm/i915: Make intel_display_power_put_unchecked() an internal-only functionImre Deak
All the display power domain references are wakeref tracked now, so we can mark intel_display_power_put_unchecked() as an internal function (for suppressing wakeref tracking in non-debug builds). Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-10-imre.deak@intel.com
2020-12-03drm/i915: Track power reference taken to disable power well functionalityImre Deak
Add wakeref tracking for the display power domain reference taken to keep the display power well functionality disabled. v2: Add missing wakeref zeroing to intel_power_domains_driver_remove() Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201201161340.2879202-2-imre.deak@intel.com
2020-12-03drm/i915: Rename power_domains.wakeref to init_wakerefImre Deak
Rename power_domains.wakeref to power_domains.init_wakeref to make the use of this reference clearer. The next patch adds tracking for another power reference user of the power_domains functionality. While at it add a missing zero wakeref assert when setting the wakeref. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-8-imre.deak@intel.com
2020-12-03drm/i915: Track power reference taken for eDP VDDImre Deak
Add wakeref tracking for the eDP encoders' AUX display power domain references taken while the panel's VDD is enabled. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-7-imre.deak@intel.com
2020-12-03drm/i915/ddi: Track power reference taken for encoder main lane AUX useImre Deak
Add wakeref tracking for the DDI encoders' main lane AUX display power domain references. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-6-imre.deak@intel.com
2020-12-03drm/i915/ddi: Track power reference taken for encoder DDI IO useImre Deak
Add wakeref tracking for the DDI encoders' DDI_IO display power domain references. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-5-imre.deak@intel.com
2020-12-03drm/i915: Track power references taken for enabled CRTCsImre Deak
Add wakeref tracking for display power domain references taken for enabled CRTCs. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-4-imre.deak@intel.com
2020-12-03drm/i915: Factor out helpers to get/put a set of tracked power domainsImre Deak
Factor out helper functions to get/put a set of power domains that are tracked using their wakeref handles. The same is needed by the next patch adding tracking for enabled CRTC power domains. v2: s/uint64_t/u64/ (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201201161340.2879202-1-imre.deak@intel.com
2020-12-03drm/i915: Use CRTC index consistently during getting/putting CRTC power domainsImre Deak
The for_each_oldnew_intel_crtc_in_state() iterator index does match crtc->pipe, but using the same thing as array index when getting and putting CRTC power domains makes things clearer. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201130212200.2811939-2-imre.deak@intel.com
2020-12-03drm/i915/gem: Check the correct variable in selftestDan Carpenter
There is a copy and paste bug in this code. It's supposed to check "obj2" instead of checking "obj" a second time. Fixes: 80f0b679d6f0 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/8ilneOcJAjwqU4t@mwand
2020-12-03drm/i915: refactor panel backlight control functions. (v2)Dave Airlie
This moves the functions into static const instead of having funcs and data in the same struct. It leaves the power callback alone, as it is used in a different manner. v2: leave power callback alone (Jani) Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130210945.31850-1-airlied@gmail.com
2020-12-03drm/i915/gvt: avoid useless use of inlineJani Nikula
In most cases, we are better off letting the compiler decide whether to inline static functions in .c files or not. In this case, the inline will be ignored anyway as mmio_pm_restore_handler() is passed as a function pointer. Fixes: 5f60b12edcd0 ("drm/i915/gvt: Save/restore HW status to support GVT suspend/resume") Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Hang Yuan <hang.yuan@linux.intel.com> Cc: Colin Xu <colin.xu@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20201130111353.25406-1-jani.nikula@intel.com
2020-12-03Merge tag 'drm-intel-next-queued-2020-11-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 features for v5.11: Highlights: - Enable big joiner to join two pipes to one port to overcome pipe restrictions (Manasi, Ville, Maarten) Display: - More DG1 enabling (Lucas, Aditya) - Fixes to cases without display (Lucas, José, Jani) - Initial PSR state improvements (José) - JSL eDP vswing updates (Tejas) - Handle EDID declared max 16 bpc (Ville) - Display refactoring (Ville) Other: - GVT features - Backmerge Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87czzzkk1s.fsf@intel.com
2020-12-02drm/i915/display: Defer initial modeset until after GGTT is initialisedChris Wilson
Prior to sanitizing the GGTT, the only operations allowed in intel_display_init_nogem() are those to reserve the preallocated (and active) regions in the GGTT leftover from the BIOS. Trying to allocate a GGTT vma (such as intel_pin_and_fence_fb_obj during the initial modeset) may then conflict with other preallocated regions that have not yet been protected. Move the initial modesetting from the end of init_nogem to the beginning of init so that any vma pinning (either framebuffers or DSB, for example), is after the GGTT is ready to handle it. This will prevent the DSB object from being destroyed too early: [ 53.449241] BUG: KASAN: use-after-free in i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449309] Read of size 8 at addr ffff88811b1e8070 by task systemd-udevd/345 [ 53.449399] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G W 5.10.0-rc5+ #12 [ 53.449409] Call Trace: [ 53.449418] dump_stack+0x9a/0xcc [ 53.449558] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449565] print_address_description.constprop.0+0x3e/0x60 [ 53.449577] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 53.449718] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449849] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.449857] kasan_report.cold+0x1f/0x37 [ 53.449993] ? i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450130] i915_init_ggtt+0x324/0x9e0 [i915] [ 53.450273] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] [ 53.450281] ? static_obj+0x69/0x80 [ 53.450289] ? lockdep_init_map_waits+0xa9/0x310 [ 53.450431] ? intel_wopcm_init+0x96/0x3d0 [i915] [ 53.450581] ? i915_gem_init+0x75/0x2d0 [i915] [ 53.450720] i915_gem_init+0x75/0x2d0 [i915] [ 53.450852] i915_driver_probe+0x8c2/0x1210 [i915] [ 53.450993] ? i915_pm_prepare+0x630/0x630 [i915] [ 53.451006] ? check_chain_key+0x1e7/0x2e0 [ 53.451025] ? __pm_runtime_resume+0x58/0xb0 [ 53.451157] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.451285] ? i915_pci_remove+0x40/0x40 [i915] [ 53.451295] ? lockdep_hardirqs_on_prepare+0x124/0x230 [ 53.451302] ? _raw_spin_unlock_irqrestore+0x42/0x50 [ 53.451309] ? lockdep_hardirqs_on+0xbf/0x130 [ 53.451315] ? preempt_count_sub+0xf/0xb0 [ 53.451321] ? _raw_spin_unlock_irqrestore+0x2f/0x50 [ 53.451335] pci_device_probe+0xf9/0x190 [ 53.451350] really_probe+0x17f/0x5b0 [ 53.451365] driver_probe_device+0x13a/0x1c0 [ 53.451376] device_driver_attach+0x82/0x90 [ 53.451386] ? device_driver_attach+0x90/0x90 [ 53.451391] __driver_attach+0xab/0x190 [ 53.451401] ? device_driver_attach+0x90/0x90 [ 53.451407] bus_for_each_dev+0xe4/0x140 [ 53.451414] ? subsys_dev_iter_exit+0x10/0x10 [ 53.451423] ? __list_add_valid+0x2b/0xa0 [ 53.451440] bus_add_driver+0x227/0x2e0 [ 53.451454] driver_register+0xd3/0x150 [ 53.451585] i915_init+0x92/0xac [i915] [ 53.451592] ? 0xffffffffa0a20000 [ 53.451598] do_one_initcall+0xb6/0x3b0 [ 53.451606] ? trace_event_raw_event_initcall_finish+0x150/0x150 [ 53.451614] ? __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.451627] ? kmem_cache_alloc_trace+0x4a4/0x8e0 [ 53.451634] ? kasan_unpoison_shadow+0x33/0x40 [ 53.451649] do_init_module+0xf8/0x350 [ 53.451662] load_module+0x43de/0x47f0 [ 53.451716] ? module_frob_arch_sections+0x20/0x20 [ 53.451731] ? rw_verify_area+0x5f/0x130 [ 53.451780] ? __do_sys_finit_module+0x10d/0x1a0 [ 53.451785] __do_sys_finit_module+0x10d/0x1a0 [ 53.451792] ? __ia32_sys_init_module+0x40/0x40 [ 53.451800] ? seccomp_do_user_notification.isra.0+0x5c0/0x5c0 [ 53.451829] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 53.451835] ? mark_held_locks+0x24/0x90 [ 53.451856] do_syscall_64+0x33/0x80 [ 53.451863] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.451868] RIP: 0033:0x7fde09b4470d [ 53.451875] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 53 f7 0c 00 f7 d8 64 89 01 48 [ 53.451880] RSP: 002b:00007ffd6abc1718 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 53.451890] RAX: ffffffffffffffda RBX: 000056444e528150 RCX: 00007fde09b4470d [ 53.451895] RDX: 0000000000000000 RSI: 00007fde09a21ded RDI: 000000000000000f [ 53.451899] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000 [ 53.451904] R10: 000000000000000f R11: 0000000000000246 R12: 00007fde09a21ded [ 53.451909] R13: 0000000000000000 R14: 000056444e329200 R15: 000056444e528150 [ 53.451957] Allocated by task 345: [ 53.451995] kasan_save_stack+0x1b/0x40 [ 53.452001] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 53.452006] kmem_cache_alloc+0x1cd/0x8d0 [ 53.452146] i915_vma_instance+0x126/0xb70 [i915] [ 53.452304] i915_gem_object_ggtt_pin_ww+0x222/0x3f0 [i915] [ 53.452446] intel_dsb_prepare+0x14f/0x230 [i915] [ 53.452588] intel_atomic_commit+0x183/0x690 [i915] [ 53.452730] intel_initial_commit+0x2bc/0x2f0 [i915] [ 53.452871] intel_modeset_init_nogem+0xa02/0x2af0 [i915] [ 53.452995] i915_driver_probe+0x8af/0x1210 [i915] [ 53.453120] i915_pci_probe+0xa6/0x2b0 [i915] [ 53.453125] pci_device_probe+0xf9/0x190 [ 53.453131] really_probe+0x17f/0x5b0 [ 53.453136] driver_probe_device+0x13a/0x1c0 [ 53.453142] device_driver_attach+0x82/0x90 [ 53.453148] __driver_attach+0xab/0x190 [ 53.453153] bus_for_each_dev+0xe4/0x140 [ 53.453158] bus_add_driver+0x227/0x2e0 [ 53.453164] driver_register+0xd3/0x150 [ 53.453286] i915_init+0x92/0xac [i915] [ 53.453292] do_one_initcall+0xb6/0x3b0 [ 53.453297] do_init_module+0xf8/0x350 [ 53.453302] load_module+0x43de/0x47f0 [ 53.453307] __do_sys_finit_module+0x10d/0x1a0 [ 53.453312] do_syscall_64+0x33/0x80 [ 53.453318] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.453345] Freed by task 82: [ 53.453379] kasan_save_stack+0x1b/0x40 [ 53.453384] kasan_set_track+0x1c/0x30 [ 53.453389] kasan_set_free_info+0x1b/0x30 [ 53.453394] __kasan_slab_free+0x112/0x160 [ 53.453399] kmem_cache_free+0xb2/0x3f0 [ 53.453536] i915_gem_flush_free_objects+0x31a/0x3b0 [i915] [ 53.453542] process_one_work+0x519/0x9f0 [ 53.453547] worker_thread+0x75/0x5c0 [ 53.453552] kthread+0x1da/0x230 [ 53.453557] ret_from_fork+0x22/0x30 [ 53.453584] The buggy address belongs to the object at ffff88811b1e8040 which belongs to the cache i915_vma of size 968 [ 53.453692] The buggy address is located 48 bytes inside of 968-byte region [ffff88811b1e8040, ffff88811b1e8408) [ 53.453792] The buggy address belongs to the page: [ 53.453842] page:00000000b35f7048 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88811b1ef940 pfn:0x11b1e8 [ 53.453847] head:00000000b35f7048 order:3 compound_mapcount:0 compound_pincount:0 [ 53.453853] flags: 0x8000000000010200(slab|head) [ 53.453860] raw: 8000000000010200 ffff888115596248 ffff888115596248 ffff8881155b6340 [ 53.453866] raw: ffff88811b1ef940 0000000000170001 00000001ffffffff 0000000000000000 [ 53.453870] page dumped because: kasan: bad access detected [ 53.453895] Memory state around the buggy address: [ 53.453944] ffff88811b1e7f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454011] ffff88811b1e7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 53.454079] >ffff88811b1e8000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb [ 53.454146] ^ [ 53.454211] ffff88811b1e8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454279] ffff88811b1e8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 53.454347] ================================================================== [ 53.454414] Disabling lock debugging due to kernel taint [ 53.454434] general protection fault, probably for non-canonical address 0xdead0000000000d0: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.454446] CPU: 1 PID: 345 Comm: systemd-udevd Tainted: G B W 5.10.0-rc5+ #12 [ 53.454592] RIP: 0010:i915_init_ggtt+0x26f/0x9e0 [i915] [ 53.454602] Code: 89 8d 48 ff ff ff 4c 8d 60 d0 49 39 c7 0f 84 37 02 00 00 4c 89 b5 40 ff ff ff 4d 8d bc 24 90 00 00 00 4c 89 ff e8 c1 97 f8 e0 <49> 83 bc 24 90 00 00 00 00 0f 84 0f 02 00 00 49 8d 7c 24 08 e8 a8 [ 53.454618] RSP: 0018:ffff88812247f430 EFLAGS: 00010286 [ 53.454625] RAX: 0000000000000000 RBX: ffff888136440000 RCX: ffffffffa03fb78f [ 53.454633] RDX: 0000000000000000 RSI: 0000000000000008 RDI: dead000000000160 [ 53.454641] RBP: ffff88812247f500 R08: ffffffff8113589f R09: 0000000000000000 [ 53.454648] R10: ffffffff83063843 R11: fffffbfff060c708 R12: dead0000000000d0 [ 53.454656] R13: ffff888136449ba0 R14: 0000000000002000 R15: dead000000000160 [ 53.454664] FS: 00007fde095c4880(0000) GS:ffff88840c880000(0000) knlGS:0000000000000000 [ 53.454672] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.454679] CR2: 00007fef132b4f28 CR3: 000000012245c002 CR4: 00000000003706e0 [ 53.454686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.454693] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.454700] Call Trace: [ 53.454833] ? i915_ggtt_suspend+0x1f0/0x1f0 [i915] Reported-by: Matthew Auld <matthew.auld@intel.com> Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Tested-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201125193032.29282-1-chris@chris-wilson.co.uk (cherry picked from commit b3bf99daaee96a141536ce5c60a0d6dba6ec1d23) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-02drm/i915/display: return earlier from intel_modeset_init() without displayJani Nikula
!HAS_DISPLAY() implies !HAS_OVERLAY(), skipping overlay setup anyway, so return earlier from intel_modeset_init() for clarity. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-4-lucas.demarchi@intel.com (cherry picked from commit 71c8415d0daa78ef1295743d0e11ba0214d0a9b9) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-02drm/i915/gt: Limit frequency drop to RPe on parkingChris Wilson
We treat idling the GT (intel_rps_park) as a downclock event, and reduce the frequency we intend to restart the GT with. Since the two workloads are likely related (e.g. a compositor rendering every 16ms), we want to carry the frequency and load information from across the idling. However, we do also need to update the frequencies so that workloads that run for less than 1ms are autotuned by RPS (otherwise we leave compositors running at max clocks, draining excess power). Conversely, if we try to run too slowly, the next workload has to run longer. Since there is a hysteresis in the power graph, below a certain frequency running a short workload for longer consumes more energy than running it slightly higher for less time. The exact balance point is unknown beforehand, but measurements with 30fps media playback indicate that RPe is a better choice. Reported-by: Edward Baker <edward.baker@intel.com> Tested-by: Edward Baker <edward.baker@intel.com> Fixes: 043cd2d14ede ("drm/i915/gt: Leave rps->cur_freq on unpark") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Edward Baker <edward.baker@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> # v5.8+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201124183521.28623-1-chris@chris-wilson.co.uk (cherry picked from commit f7ed83cc1925f0b8ce2515044d674354035c3af9) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-02drm/i915/gt: Retain default context state across shrinkingVenkata Ramana Nayana
As we use a shmemfs file to hold the context state, when not in use it may be swapped out, such as across suspend. Since we wrote into the shmemfs without marking the pages as dirty, the contents may be dropped instead of being written back to swap. On re-using the shmemfs file, such as creating a new context after resume, the contents of that file were likely garbage and so the new context could then hang the GPU. Simply mark the page as being written when copying into the shmemfs file, and it the new contents will be retained across swapout. Fixes: be1cb55a07bf ("drm/i915/gt: Keep a no-frills swappable copy of the default context state") Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: CQ Tang <cq.tang@intel.com> Signed-off-by: Venkata Ramana Nayana <venkata.ramana.nayana@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.8+ Link: https://patchwork.freedesktop.org/patch/msgid/20201127120718.454037-161-matthew.auld@intel.com (cherry picked from commit a9d71f76ccfd309f3bd5f7c9b60e91a4decae792) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-02drm/i915/gt: Split the breadcrumb spinlock between global and contextsChris Wilson
As we funnel more and more contexts into the breadcrumbs on an engine, the hold time of b->irq_lock grows. As we may then contend with the b->irq_lock during request submission, this increases the burden upon the engine->active.lock and so directly impacts both our execution latency and client latency. If we split the b->irq_lock by introducing a per-context spinlock to manage the signalers within a context, we then only need the b->irq_lock for enabling/disabling the interrupt and can avoid taking the lock for walking the list of contexts within the signal worker. Even with the current setup, this greatly reduces the number of times we have to take and fight for b->irq_lock. Furthermore, this closes the race between enabling the signaling context while it is in the process of being signaled and removed: <4>[ 416.208555] list_add corruption. prev->next should be next (ffff8881951d5910), but was dead000000000100. (prev=ffff8882781bb870). <4>[ 416.208573] WARNING: CPU: 7 PID: 0 at lib/list_debug.c:28 __list_add_valid+0x4d/0x70 <4>[ 416.208575] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915] <4>[ 416.208611] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G U 5.8.0-CI-CI_DRM_8852+ #1 <4>[ 416.208614] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019 <4>[ 416.208627] RIP: 0010:__list_add_valid+0x4d/0x70 <4>[ 416.208631] Code: c3 48 89 d1 48 c7 c7 60 18 33 82 48 89 c2 e8 ea e0 b6 ff 0f 0b 31 c0 c3 48 89 c1 4c 89 c6 48 c7 c7 b0 18 33 82 e8 d3 e0 b6 ff <0f> 0b 31 c0 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 00 19 33 82 e8 <4>[ 416.208633] RSP: 0018:ffffc90000280e18 EFLAGS: 00010086 <4>[ 416.208636] RAX: 0000000000000000 RBX: ffff888250a44880 RCX: 0000000000000105 <4>[ 416.208639] RDX: 0000000000000105 RSI: ffffffff82320c5b RDI: 00000000ffffffff <4>[ 416.208641] RBP: ffff8882781bb870 R08: 0000000000000000 R09: 0000000000000001 <4>[ 416.208643] R10: 00000000054d2957 R11: 000000006abbd991 R12: ffff8881951d58c8 <4>[ 416.208646] R13: ffff888286073880 R14: ffff888286073848 R15: ffff8881951d5910 <4>[ 416.208669] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000 <4>[ 416.208671] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 416.208673] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0 <4>[ 416.208675] PKRU: 55555554 <4>[ 416.208677] Call Trace: <4>[ 416.208679] <IRQ> <4>[ 416.208751] i915_request_enable_breadcrumb+0x278/0x400 [i915] <4>[ 416.208839] __i915_request_submit+0xca/0x2a0 [i915] <4>[ 416.208892] __execlists_submission_tasklet+0x480/0x1830 [i915] <4>[ 416.208942] execlists_submission_tasklet+0xc4/0x130 [i915] <4>[ 416.208947] tasklet_action_common.isra.17+0x6c/0x1c0 <4>[ 416.208954] __do_softirq+0xdf/0x498 <4>[ 416.208960] ? handle_fasteoi_irq+0x150/0x150 <4>[ 416.208964] asm_call_on_stack+0xf/0x20 <4>[ 416.208966] </IRQ> <4>[ 416.208969] do_softirq_own_stack+0xa1/0xc0 <4>[ 416.208972] irq_exit_rcu+0xb5/0xc0 <4>[ 416.208976] common_interrupt+0xf7/0x260 <4>[ 416.208980] asm_common_interrupt+0x1e/0x40 <4>[ 416.208985] RIP: 0010:cpuidle_enter_state+0xb6/0x410 <4>[ 416.208987] Code: 00 31 ff e8 9c 3e 89 ff 80 7c 24 0b 00 74 12 9c 58 f6 c4 02 0f 85 31 03 00 00 31 ff e8 e3 6c 90 ff e8 fe a4 94 ff fb 45 85 ed <0f> 88 c7 02 00 00 49 63 c5 4c 2b 24 24 48 8d 14 40 48 8d 14 90 48 <4>[ 416.208989] RSP: 0018:ffffc90000143e70 EFLAGS: 00000206 <4>[ 416.208991] RAX: 0000000000000007 RBX: ffffe8ffffda8070 RCX: 0000000000000000 <4>[ 416.208993] RDX: 0000000000000000 RSI: ffffffff8238b4ee RDI: ffffffff8233184f <4>[ 416.208995] RBP: ffffffff826b4e00 R08: 0000000000000000 R09: 0000000000000000 <4>[ 416.208997] R10: 0000000000000001 R11: 0000000000000000 R12: 00000060e7f24a8f <4>[ 416.208998] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000003 <4>[ 416.209012] cpuidle_enter+0x24/0x40 <4>[ 416.209016] do_idle+0x22f/0x2d0 <4>[ 416.209022] cpu_startup_entry+0x14/0x20 <4>[ 416.209025] start_secondary+0x158/0x1a0 <4>[ 416.209030] secondary_startup_64+0xa4/0xb0 <4>[ 416.209039] irq event stamp: 10186977 <4>[ 416.209042] hardirqs last enabled at (10186976): [<ffffffff810b9363>] tasklet_action_common.isra.17+0xe3/0x1c0 <4>[ 416.209044] hardirqs last disabled at (10186977): [<ffffffff81a5e5ed>] _raw_spin_lock_irqsave+0xd/0x50 <4>[ 416.209047] softirqs last enabled at (10186968): [<ffffffff810b9a1a>] irq_enter_rcu+0x6a/0x70 <4>[ 416.209049] softirqs last disabled at (10186969): [<ffffffff81c00f4f>] asm_call_on_stack+0xf/0x20 <4>[ 416.209317] list_del corruption, ffff8882781bb870->next is LIST_POISON1 (dead000000000100) <4>[ 416.209317] WARNING: CPU: 7 PID: 46 at lib/list_debug.c:47 __list_del_entry_valid+0x4e/0x90 <4>[ 416.209317] Modules linked in: i915(+) vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio mei_hdcp x86_pkg_temp_thermal coretemp ax88179_178a usbnet mii crct10dif_pclmul snd_intel_dspcfg crc32_pclmul snd_hda_codec snd_hwdep ghash_clmulni_intel snd_hda_core e1000e snd_pcm ptp pps_core mei_me mei prime_numbers intel_lpss_pci [last unloaded: i915] <4>[ 416.209317] CPU: 7 PID: 46 Comm: ksoftirqd/7 Tainted: G U W 5.8.0-CI-CI_DRM_8852+ #1 <4>[ 416.209317] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3212.A00.1905212112 05/21/2019 <4>[ 416.209317] RIP: 0010:__list_del_entry_valid+0x4e/0x90 <4>[ 416.209317] Code: 2e 48 8b 32 48 39 fe 75 3a 48 8b 50 08 48 39 f2 75 48 b8 01 00 00 00 c3 48 89 fe 48 89 c2 48 c7 c7 38 19 33 82 e8 62 e0 b6 ff <0f> 0b 31 c0 c3 48 89 fe 48 c7 c7 70 19 33 82 e8 4e e0 b6 ff 0f 0b <4>[ 416.209317] RSP: 0018:ffffc90000280de8 EFLAGS: 00010086 <4>[ 416.209317] RAX: 0000000000000000 RBX: ffff8882781bb848 RCX: 0000000000010104 <4>[ 416.209317] RDX: 0000000000010104 RSI: ffffffff8238b4ee RDI: 00000000ffffffff <4>[ 416.209317] RBP: ffff8882781bb880 R08: 0000000000000000 R09: 0000000000000001 <4>[ 416.209317] R10: 000000009fb6666e R11: 00000000feca9427 R12: ffffc90000280e18 <4>[ 416.209317] R13: ffff8881951d5930 R14: dead0000000000d8 R15: ffff8882781bb880 <4>[ 416.209317] FS: 0000000000000000(0000) GS:ffff88829c180000(0000) knlGS:0000000000000000 <4>[ 416.209317] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 416.209317] CR2: 0000556231326c48 CR3: 0000000005610001 CR4: 0000000000760ee0 <4>[ 416.209317] PKRU: 55555554 <4>[ 416.209317] Call Trace: <4>[ 416.209317] <IRQ> <4>[ 416.209317] remove_signaling_context.isra.13+0xd/0x70 [i915] <4>[ 416.209513] signal_irq_work+0x1f7/0x4b0 [i915] This is caused by virtual engines where although we take the breadcrumb lock on each of the active engines, they may be different engines on different requests, It turns out that the b->irq_lock was not a sufficient proxy for the engine->active.lock in the case of more than one request, so introduce an explicit lock around ce->signals. v2: ce->signal_lock is acquired with only RCU protection and so must be treated carefully and not cleared during reallocation. We also then need to confirm that the ce we lock is the same as we found in the breadcrumb list. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2276 Fixes: c18636f76344 ("drm/i915: Remove requirement for holding i915_request.lock for breadcrumbs") Fixes: 2854d866327a ("drm/i915/gt: Replace intel_engine_transfer_stale_breadcrumbs") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-4-chris@chris-wilson.co.uk (cherry picked from commit c744d50363b714783bbc88d986cc16def13710f7) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-02drm/i915/gt: Protect context lifetime with RCUChris Wilson
Allow a brief period for continued access to a dead intel_context by deferring the release of the struct until after an RCU grace period. As we are using a dedicated slab cache for the contexts, we can defer the release of the slab pages via RCU, with the caveat that individual structs may be reused from the freelist within an RCU grace period. To handle that, we have to avoid clearing members of the zombie struct. This is required for a later patch to handle locking around virtual requests in the signaler, as those requests may want to move between engines and be destroyed while we are holding b->irq_lock on a physical engine. v2: Drop mutex_reinit(), if we never mark the mutex as destroyed we don't need to reset the debug code, at the loss of having the mutex debug code spot us attempting to destroy a locked mutex. v3: As the intended use will remain strongly referenced counted, with very little inflight access across reuse, drop the ctor. v4: Drop the unrequired change to remove the temporary reference around dropping the active context, and add back some more missing ctor operations. v5: The ctor is back. Tvrtko spotted that ce->signal_lock [introduced later] maybe accessed under RCU and so needs special care not to be reinitialised. v6: Don't mix SLAB_TYPESAFE_BY_RCU and RCU list iteration. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201126140407.31952-3-chris@chris-wilson.co.uk (cherry picked from commit 14d1eaf08845c534963c83f754afe0cb14cb2512) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-12-02drm/i915/display: Record the plane update times for debuggingChris Wilson
Since we try and estimate how long we require to update the registers to perform a plane update, it is of vital importance that we measure the distribution of plane updates to better guide our estimate. If we underestimate how long it takes to perform the plane update, we may slip into the next scanout frame causing a tear. If we overestimate, we may unnecessarily delay the update to the next frame, causing visible jitter. Replace the warning that we exceed some arbitrary threshold for the vblank update with a histogram for debugfs. v2: Add a per-crtc debugfs entry so that the information is easier to extract when testing individual CRTC, and so that it can be reset before a test. v3: Flip the graph on its side; creates space to label the time axis. Updates: 4684 | 1us | | 4us |******** |********** 16us |*********** |***** 66us | | 262us | | 1ms | | 4ms | | 17ms | | Min update: 5918ns Max update: 54781ns Average update: 16628ns Overruns > 250us: 0 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1982 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2 Link: https://patchwork.freedesktop.org/patch/msgid/20201202212814.26320-1-chris@chris-wilson.co.uk
2020-12-02Revert "drm/i915/lmem: Limit block size to 4G"Chris Wilson
Mixing I915_ALLOC_CONTIGUOUS and I915_ALLOC_MAX_SEGMENT_SIZE fared badly. The two directives conflict, with the contiguous request setting the min_order to the full size of the object, and the max-segment-size setting the max_order to the limit of the DMA mapper. This results in a situation where max_order < min_order, causing our sanity checks to fail. Instead of limiting the buddy block size, in the previous patch we split the oversized buddy into multiple scatterlist elements. Fixes: d2cf0125d4a1 ("drm/i915/lmem: Limit block size to 4G") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201202173444.14903-2-chris@chris-wilson.co.uk
2020-12-02drm/i915/gem: Limit lmem scatterlist elements to UINT_MAXChris Wilson
Adhere to the i915_sg_max_segment() limit on the lengths of individual scatterlist elements, and in doing so split up very large chunks of lmem into manageable pieces for the dma-mapping backend. Reported-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Suggested-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201202173444.14903-1-chris@chris-wilson.co.uk
2020-12-02drm/i915/selftests: Tidy prng constructor for client blitsChris Wilson
Since we only initialise the prng once within the scope of the selftest, we can use the default initialiser. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201202130406.18461-1-chris@chris-wilson.co.uk
2020-12-02drm/i915: remove last traces of I915_READ(), I915_WRITE() and POSTING_READ()Jani Nikula
Good riddance! Remove the macros and their remaining references in comments. The following functions should be used instead, depending on the use case: - intel_uncore_read(), intel_uncore_write(), intel_uncore_posting_read() - intel_de_read(), intel_de_write(), intel_de_posting_read() Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-10-jani.nikula@intel.com
2020-12-02Revert "drm/i915/display/fbc: Disable fbc by default on TGL"Uma Shankar
FBC can be re-enabled on TGL with WA of keeping it disabled while PSR2 is enabled. This reverts commit 2982ded2ff5ce0cf1a49bc39a526da182782b664. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201190406.1752-3-uma.shankar@intel.com
2020-12-02drm/i915/display/tgl: Disable FBC with PSR2Uma Shankar
There are some corner cases wrt underrun when we enable FBC with PSR2 on TGL. Recommendation from hardware is to keep this combination disabled. Bspec: 50422 HSD: 14010260002 v2: Added psr2 enabled check from crtc_state (Anshuman) Added Bspec link and HSD referneces (Jose) v3: Moved the logic to disable fbc to intel_fbc_update_state_cache and removed the crtc->config usages, as per Ville's recommendation. v4: Introduced a variable in fbc state_cache instead of the earlier plane.visible WA, as suggested by Jose. v5: Dropped an extra check for fbc in intel_fbc_enable and addressed review comments by Jose. v6: Move WA to end of function and added Jose's RB. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201190406.1752-2-uma.shankar@intel.com
2020-12-02drm/i915/pmu: Deprecate I915_PMU_LAST and optimize state trackingTvrtko Ursulin
Adding any kinds of "last" abi markers is usually a mistake which I repeated when implementing the PMU because it felt convenient at the time. This patch marks I915_PMU_LAST as deprecated and stops the internal implementation using it for sizing the event status bitmask and array. New way of sizing the fields is a bit less elegant, but it omits reserving slots for tracking events we are not interested in, and as such saves some runtime space. Adding sampling events is likely to be a special event and the new plumbing needed will be easily detected in testing. Existing asserts against the bitfield and array sizes are keeping the code safe. First event which gets the new treatment in this new scheme are the interrupts - which neither needs any tracking in i915 pmu nor needs waking up the GPU to read it. v2: * Streamline helper names. (Chris) v3: * Comment which events need tracking. (Chris) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20201201131757.206367-1-tvrtko.ursulin@linux.intel.com
2020-12-02drm/i915/gvt: replace I915_WRITE with intel_uncore_writeJani Nikula
Let's avoid adding new I915_WRITE uses while we try to get rid of them. Fixes: 5f60b12edcd0 ("drm/i915/gvt: Save/restore HW status to support GVT suspend/resume") Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Hang Yuan <hang.yuan@linux.intel.com> Cc: Colin Xu <colin.xu@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-9-jani.nikula@intel.com
2020-12-02drm/i915/gem: Report error for vmap() failureChris Wilson
Convert the NULL pointer from a failed vmap() to ERR_PTR(-ENOMEM) for propagation. <1> [269.830447] BUG: kernel NULL pointer dereference, address: 0000000000000000 <1> [269.830455] #PF: supervisor write access in kernel mode <1> [269.830457] #PF: error_code(0x0002) - not-present page <6> [269.830459] PGD 0 P4D 0 <4> [269.830465] Oops: 0002 [#1] PREEMPT SMP PTI <4> [269.830469] CPU: 3 PID: 5789 Comm: i915_selftest Tainted: G U 5.10.0-rc6-CI-CI_DRM_9412+ #1 <4> [269.830472] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4> [269.830636] RIP: 0010:igt_client_fill+0x1b9/0x5f0 [i915] <4> [269.830640] Code: e8 0c 32 02 00 48 89 c5 48 3d 00 f0 ff ff 0f 87 e9 02 00 00 48 8b 8b 78 06 00 00 44 89 f0 48 89 ef 35 af be ad de 48 c1 e9 02 <f3> ab 0f b6 83 80 03 00 00 89 c2 c0 ea 03 83 e2 02 75 09 83 c8 20 <4> [269.830642] RSP: 0018:ffffc900007a79e8 EFLAGS: 00010206 <4> [269.830645] RAX: 00000000df0bf37b RBX: ffff88811d8af3c0 RCX: 00000000010afc00 <4> [269.830647] RDX: 0000000000000000 RSI: ffffffff822f2b17 RDI: 0000000000000000 <4> [269.830648] RBP: 0000000000000000 R08: ffff888111c80930 R09: 00000000fffffffe <4> [269.830650] R10: 0000000000000000 R11: 00000000ffbc70e4 R12: ffff88811090f700 <4> [269.830652] R13: ffff88810df60180 R14: 0000000001a64dd4 R15: 0000000000000000 <4> [269.830655] FS: 00007f137b07de40(0000) GS:ffff88817b980000(0000) knlGS:0000000000000000 <4> [269.830657] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [269.830659] CR2: 0000000000000000 CR3: 0000000115984000 CR4: 0000000000350ee0 <4> [269.830661] Call Trace: <4> [269.830780] __i915_subtests.cold.7+0x42/0x92 [i915] <4> [269.830886] ? __i915_nop_teardown+0x10/0x10 [i915] <4> [269.830989] ? __i915_live_setup+0x30/0x30 [i915] <4> [269.831104] __run_selftests.part.3+0xf7/0x14c [i915] <4> [269.831939] i915_live_selftests.cold.5+0x1f/0x47 [i915] <4> [269.832027] i915_pci_probe+0x93/0x1d0 [i915] <4> [269.832037] ? _raw_spin_unlock_irqrestore+0x2f/0x50 <4> [269.832043] pci_device_probe+0x9e/0x110 <4> [269.832049] really_probe+0x1c4/0x430 <4> [269.832053] driver_probe_device+0xd9/0x140 <4> [269.832056] device_driver_attach+0x4a/0x50 <4> [269.832059] __driver_attach+0x83/0x140 <4> [269.832062] ? device_driver_attach+0x50/0x50 <4> [269.832064] ? device_driver_attach+0x50/0x50 <4> [269.832067] bus_for_each_dev+0x75/0xc0 <4> [269.832070] bus_add_driver+0x14b/0x1f0 <4> [269.832073] driver_register+0x66/0xb0 <4> [269.832160] i915_init+0x70/0x87 [i915] <4> [269.832164] ? 0xffffffffa05e3000 <4> [269.832168] do_one_initcall+0x56/0x2e0 <4> [269.832174] ? kmem_cache_alloc_trace+0x6a4/0x770 <4> [269.832180] do_init_module+0x55/0x200 <4> [269.832184] load_module+0x22a2/0x2480 <4> [269.832191] ? __do_sys_finit_module+0xad/0x110 <4> [269.832194] __do_sys_finit_module+0xad/0x110 <4> [269.832199] do_syscall_64+0x33/0x80 <4> [269.832202] entry_SYSCALL_64_after_hwframe+0x44/0xa9 <4> [269.832204] RIP: 0033:0x7f137a718839 <4> [269.832208] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 <4> [269.832210] RSP: 002b:00007ffc4267d308 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 <4> [269.832214] RAX: ffffffffffffffda RBX: 000056288b88f0d0 RCX: 00007f137a718839 <4> [269.832216] RDX: 0000000000000000 RSI: 000056288b895850 RDI: 0000000000000007 <4> [269.832218] RBP: 000056288b895850 R08: 312d3d7374736574 R09: 000056288b88c020 <4> [269.832220] R10: 00007ffc4267d450 R11: 0000000000000246 R12: 0000000000000000 <4> [269.832222] R13: 000056288b8877a0 R14: 0000000000000020 R15: 0000000000000045 <4> [269.832226] Modules linked in: i915(+) vgem mei_hdcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cdc_ether usbnet snd_intel_dspcfg mii snd_hda_codec snd_hwdep snd_hda_core r8169 snd_pcm realtek mei_me mei prime_numbers intel_lpss_pci i2c_hid pinctrl_geminilake [last unloaded: i915] <4> [269.832264] CR2: 0000000000000000 Fixes: cb2ce93e5b05 ("drm/i915/gem: Differentiate oom failures from invalid map types") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201215441.31900-1-chris@chris-wilson.co.uk
2020-12-01drm/i915/tgl, rkl, dg1: Apply WA_1406941453 to TGL, RKL and DG1Swathi Dhanavanthri
This workaround is applicable only for tgl,rkl and dg1. Bspec: 52890, 53273, 53508. Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201201175735.1377372-1-lucas.demarchi@intel.com
2020-12-02drm/i915/lspcon: Do not send DRM infoframes to non-HDMI sinksUma Shankar
Non-HDMI sinks shouldn't be sent Dynamic Range and Mastering infoframes. Check for that when using LSPCON. v2: Addressed Ville's review comment. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-15-uma.shankar@intel.com
2020-12-02drm/i915/display: Implement DRM infoframe read for LSPCONUma Shankar
Implement Read back of HDR metadata infoframes i.e Dynamic Range and Mastering Infoframe for LSPCON devices. v2: Added proper bitmask of enabled infoframes as per Ville's recommendation. v3: Dropped a redundant wrapper as per Ville's comment. v4: Dropped a redundant print, added Ville's RB. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-14-uma.shankar@intel.com
2020-12-02drm/i915/display: Implement infoframes readback for LSPCONUma Shankar
Implemented Infoframes enabled readback for LSPCON devices. This will help align the implementation with state readback infrastructure. v2: Added proper bitmask of enabled infoframes as per Ville's recommendation. v3: Added pcon specific infoframe types instead of using the HSW one's, as recommended by Ville. v4: Addressed Ville's review comment by adding HDMI infoframe versions directly instead of DIP wrappers. v5: Re-ordered the patches to avoid potential break in usage, as suggested by Ville. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-13-uma.shankar@intel.com
2020-12-02drm/i915/lspcon: Create separate infoframe_enabled helperUma Shankar
Lspcon has Infoframes as well as DIP for HDR metadata(DRM Infoframe). Create a separate mechanism for lspcon compared to HDMI in order to address the same and ensure future scalability. v2: Streamlined this as per Ville's suggestions, making sure that HDMI infoframe versions are directly returned instead of a redundant and confusing DIP overhead. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-12-uma.shankar@intel.com
2020-12-02drm/i915/display: Enable HDR for Parade based lspconUma Shankar
Enable HDR for LSPCON based on Parade along with MCA. v2: Added a helper for status reg as suggested by Ville. v3: Removed a redundant variable, added Ville's RB. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Vipin Anand <vipin.anand@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-11-uma.shankar@intel.com
2020-12-02drm/i915/display: Nuke bogus lspcon checkUma Shankar
Dropped a irrelevant lspcon check from intel_hdmi_add_properties function. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-10-uma.shankar@intel.com
2020-12-02drm/i915/display: Enable colorspace programming for LSPCON devicesUma Shankar
Enable HDMI Colorspace for LSPCON based devices. Sending Colorimetry data for HDR using AVI infoframe. LSPCON firmware expects this and though SOC drives DP, for HDMI panel AVI infoframe is sent to the LSPCON device which transfers the same to HDMI sink. v2: Dropped state managed in drm core as per Jani Nikula's suggestion. v3: Aligned colorimetry handling for lspcon as per compute_avi_infoframes, as suggested by Ville. v4: Finally fixed this with Ville's help, re-phrased the commit header and description. v5: Register HDMI colorspace for lspcon and move this to intel_dp_add_properties as we can't create property at late_register. Credits-to: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-9-uma.shankar@intel.com
2020-12-02drm/i915: Split intel_attach_colorspace_property() into HDMI vs. DP variantsVille Syrjälä
With LSPCON we use the AVI infoframe to convey the colorimetry information (as opposed to DP MSA/SDP), so the property we expose should match the values we can stuff into the infoframe. Ie. we must use the HDMI variant of the property, even though we drive LSPCON in PCON mode. To that end just split intel_attach_colorspace_property() into HDMI and DP variants and let the caller worry about which one it wants to use. Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-8-uma.shankar@intel.com
2020-12-02drm/i915/display: Attach content type property for LSPCONUma Shankar
Content type is supported on HDMI sink devices. Attached the property for the same for LSPCON based devices. v2: Added the content type programming when we are attaching the property to connector, as suggested by Ville. v3: Need to attach content type on intel_dp_add_properties as creating of new properties is not possible at late_register. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-7-uma.shankar@intel.com
2020-12-02drm/i915/display: Add a WARN for invalid output range and formatUma Shankar
Add a WARN to rule out an invalid output range and format combination. This is to align the lspcon code with compute_avi_infoframes. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-6-uma.shankar@intel.com
2020-12-02drm/i915/display: Fixes quantization range for YCbCr outputUma Shankar
This patch fixes the quantization range for YCbCr output on Lspcon based devices. v2: Re-phrased the description and added Ville's Rb. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-5-uma.shankar@intel.com
2020-12-02drm/i915/display: Attach HDR property for capable Gen9 devicesUma Shankar
Attach HDR property for Gen9 devices with MCA LSPCON chips. v2: Cleaned HDR property attachment logic based on capability as per Jani Nikula's suggestion. v3: Fixed the HDR property attachment logic as per the new changes by Kai-Feng to align with lspcon detection failure on some devices. v4: Add HDR proprty in late_register to handle lspcon detection, as suggested by Ville. v5: Init Lspcon only if advertized from BIOS. v6: Added a Todo to plan a cleanup later, added Ville's RB. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-4-uma.shankar@intel.com
2020-12-02drm/i915/display: Enable HDR on gen9 devices with MCA LspconUma Shankar
Gen9 hardware supports HDMI2.0 through LSPCON chips. Extending HDR support for MCA LSPCON based GEN9 devices. SOC will drive LSPCON as DP and send HDR metadata as standard DP SDP packets. LSPCON will be set to operate in PCON mode, will receive the metadata and create Dynamic Range and Mastering Infoframe (DRM packets) and send it to HDR capable HDMI sink devices. v2: Re-used hsw infoframe write implementation for HDR metadata for LSPCON as per Ville's suggestion. v3: Addressed Jani Nikula's review comments. v4: Addressed Ville's review comments, removed redundant wrapper and checks, passed arguments instead of hardcodings. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-3-uma.shankar@intel.com
2020-12-02drm/i915/display: Add HDR Capability detection for LSPCONUma Shankar
LSPCON firmware exposes HDR capability through LPCON_CAPABILITIES DPCD register. LSPCON implementations capable of supporting HDR set HDR_CAPABILITY bit in LSPCON_CAPABILITIES to 1. This patch reads the same, detects the HDR capability and adds this to intel_lspcon struct. v2: Addressed Jani Nikula's review comment and fixed the HDR capability detection logic v3: Deferred HDR detection from lspcon_init (Ville) v4: Addressed Ville's minor review comments, added his RB. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130204738.2443-2-uma.shankar@intel.com
2020-12-01drm/i915/display/psr: Calculate selective fetch plane registersJosé Roberto de Souza
Add the calculations to set plane selective fetch registers depending in the value of the area damaged. It is still using the whole plane area as damaged but that will change in next patches. v2: - fixed new_plane_state->uapi.dst.y2 typo in intel_psr2_sel_fetch_update() - do not shifthing new_plane_state->uapi.dst only src is in 16.16 format BSpec: 55229 Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201130125750.17820-1-jose.souza@intel.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 14:07:30 +0000