summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/panel/panel-simple.c
AgeCommit message (Collapse)Author
2018-10-29drm/panel: simple: Support panels with HPD where HPD isn't connectedDouglas Anderson
Some eDP panels that are designed to be always connected to a board use their HPD signal to signal that they've finished powering on and they're ready to be talked to. However, for various reasons it's possible that the HPD signal from the panel isn't actually hooked up. In the case where the HPD isn't hooked up you can look at the timing diagram on the panel datasheet and insert a delay for the maximum amount of time that the HPD might take to come up. Let's add support in simple-panel for this concept. At the moment we will co-opt the existing "prepare" delay to keep track of the delay and we'll use a boolean to specify that a given panel should only apply the delay if the "no-hpd" property was specified. Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181025222134.174583-2-dianders@chromium.org
2018-09-27drm/panel: simple: Add DLC1010GIG panelMarco Felsch
Add support for the DLC DLC1010GIG 1280x800 10.1" LVDS panel to the simple-panel driver. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180924152610.25939-1-m.felsch@pengutronix.de
2018-09-27drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panelChen-Yu Tsai
This panel is marketed as Banana Pi 7" LCD display. On the back is a sticker denoting the model name S070WV20-CT16. This is a 7" 800x480 panel connected through a 24-bit RGB interface. However the panel only does 262k colors. Depending on the variant, the PCB attached to the panel module either supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel itself. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-5-wens@csie.org
2018-09-27drm/panel: add panel CDTech S043WQ26H-CT7 to panel-simpleGiulio Benetti
This patch adds support for CDTech S043WQ26H-CT7 480x272 4.3" panel to DRM simple panel driver. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-5-giulio.benetti@micronovasrl.com
2018-09-27drm/panel: add panel CDTech S070WV95-CT16 to panel-simpleGiulio Benetti
This patch adds support for CDTech S070WV95-CT16 800x480 7" panel to DRM simple panel driver. Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-3-giulio.benetti@micronovasrl.com
2018-09-27drm/panel: simple: fix BOE/HV070WSA-100 timingsAndrzej Hajda
Panel timings were taken from vendor code and are not fully correct - refresh rate is about 50Hz instead of 60Hz. The patch fixes it. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180725154644.25412-9-a.hajda@samsung.com
2018-08-14drm/panel: simple: tv123wam: Add unprepare delaySean Paul
The panel datasheet specifies a 500ms delay after power-down before re-enabling. Changes in v2: - None Changes in v3: - Added to the set Cc: Sandeep Panda <spanda@codeaurora.org> Reviewed-by: Sandeep Panda <spanda@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180813213058.184821-2-sean@poorly.run
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2018-07-11drm/panel: simple: Add Sharp LQ035Q7DB03 panel supportVladimir Zapolskiy
The change adds support for Sharp LQ035Q7DB03 3.5" QVGA TFT panel. Note that this aged panel is already found in the kernel sources, for instance in board mach files mach-mx21ads.c, mach-mx27ads.c, mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706185101.31186-1-vz@mleia.com
2018-07-10drm/panel: simple: Add support for DataImage SCF0700C48GGU18Michal Vokáč
This adds support for the DataImage SCF0700C48GGU18 7.0" WVGA (800x480) TFT LCD panel. The panel has 24-bit parallel interface and can be supported by the simple panel driver. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1529930490-11874-2-git-send-email-michal.vokac@ysoft.com
2018-07-10drm/panel: simple: Add support for Innolux G070Y2-L01Christoph Fritz
This patch adds support for Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1528111008.2818.20.camel@googlemail.com
2018-07-10drm/panel: simple: Add newhaven, nhd-4.3-480272ef-atxl LCDTomi Valkeinen
Add support for newhaven,nhd-4.3-480272ef-atxl to panel-simple. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180618132242.8673-8-tomi.valkeinen@ti.com
2018-07-10drm/panel: simple: Add support for BOE HV070WSA-100 panel to simple-panelAndrzej Hajda
The patch adds support for BOE HV070WSA-100 WSVGA 7.01 inch panel to the panel-simple driver. The panel is used in Exynos5250-arndale boards. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1529396370-18761-6-git-send-email-m.purski@samsung.com
2018-07-10drm/panel: simple: Add DLC DLC0700YZG-1 panelPhilipp Zabel
This patch adds support for DLC DLC0700YZG-1 1024x600 LVDS panels to the simple-panel driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [m.felsch@pengutronix.de: fix typo in compatible dt-binding] [m.felsch@pengutronix.de: add property bindings] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180523092504.5142-3-m.felsch@pengutronix.de
2018-07-10drm/panel: Add support for the EDT ETM0700G0EDH6Jan Tuerk
The Emerging Display Technology ETM0700G0EDH6 is the uses the same panel as the ETM0700G0BDH6. It differs in the hardware design for the backlight and the touchscreen i2c interface. As the new display type has different requirements for drive-strengths on the i2c-bus, add an additional compatible to allow the handling of it or warn about incompatible cpu and display combinations. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-3-jan.tuerk@emtrion.com
2018-07-10drm/panel: Add support for the EDT ETM0700G0BDH6Jan Tuerk
The Emerging Display Technology ETM0700G0BDH6 is exactly the same display as the ETM0700G0DH6, exept the pixelclock polarity. Therefore re-use the ETM0700G0DH6 modes. It is used by default on emtrion Avari based development kits. Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-2-jan.tuerk@emtrion.com
2018-07-10drm/panel: simple: Add support for Rocktech RK070ER9427 LCD panelJagan Teki
This adds support for the Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180607134648.2902-1-jagan@amarulasolutions.com
2018-05-29display: panel: Add AUO g070vvn01 display support (800x480)Lukasz Majewski
This commit adds support for AUO's 7.0" display. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514190849.18723-1-lukma@denx.de
2018-05-18drm/panel: simple: Fix data type in KEO TX31D200VM0BAA timingsStefan Agner
All values in a struct struct timing_entry (every entry in struct display_timing) require an integer. Choose the closest safe integer of 32. This avoids a warning seen with clang: drivers/gpu/drm/panel/panel-simple.c:1250:27: warning: implicit conversion from 'double' to 'u32' (aka 'unsigned int') changes value from 33.5 to 33 [-Wliteral-conversion] .vfront_porch = { 6, 21, 33.5 }, ~ ^~~~ drivers/gpu/drm/panel/panel-simple.c:1251:26: warning: implicit conversion from 'double' to 'u32' (aka 'unsigned int') changes value from 33.5 to 33 [-Wliteral-conversion] .vback_porch = { 6, 21, 33.5 }, ~ ^~~~ Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180419212003.8155-1-stefan@agner.ch
2018-05-18drm/panel: simple: AUO P320HVN03 uses SPWG data orderingLucas Stach
The patch adding support for the AUO P320HVN03 panel was written against a preliminary datasheet, which specified JEIDA data ordering. Testing with real hardware has shown that the actually used data ordering is SPWG. Fixes: 70c0d5b783f5 (drm/panel: simple: add support for AUO P320HVN03) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180411152741.22483-1-l.stach@pengutronix.de
2018-05-18drm/panel: simple: Add Innolux TV123WAM panel driver supportspanda@codeaurora.org
Add support for Innolux TV123WAM, which is a 12.3" eDP display panel with 2160x1440 resolution. Changes in v1: - Add the compatibility string, display_mode and panel_desc structures in alphabetical order (Sean Paul). Signed-off-by: Sandeep Panda <spanda@codeaurora.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1526363564-13823-4-git-send-email-spanda@codeaurora.org
2018-05-18drm/panel: Remove drm_panel_detach() calls from all panel driversJyri Sarha
Remove all drm_panel_detach() calls from all panel drivers and update the kerneldoc for drm_panel_detach(). Setting the connector and drm to NULL when the DRM panel device is going away hardly serves any purpose. Usually the whole memory structure is freed right after the remove call. However, calling the detach function from the master DRM device, and setting the connector pointer to NULL, has the logic of marking the panel again as available for another DRM master to attach. The usual situation would be the same DRM master device binding again. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/464b8d330d6b4c94cfb5aad2ca9ea7eb2c52d934.1524727888.git.jsarha@ti.com
2018-03-12drm/panel: Add support for AUO G104SN02 V2 panelChristoph Fritz
This patch adds support for AUO G104SN02 V2 800x600 10.4" panel to DRM simple panel driver. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1513430016.1930.4.camel@googlemail.com
2018-03-12drm/panel: simple: Add support for KEO TX31D200VM0BAAJagan Teki
This adds support for the Kaohsiung Opto-Electronics., TX31D200VM0BAA 12.3" HSXGA LVDS panel, which can be supported by the simple panel driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1517766571-409-5-git-send-email-jagan@amarulasolutions.com
2018-03-12drm/panel: simple: Use display_timing for lq123p1jx31Sean Paul
Convert the sharp lq123p1jx31 from using a fixed mode to specifying a display timing with min/typ/max values. This allows us to capture the timings set forth in the datasheet as well as the additional values that we've cleared with the display vendor to avoid interference with the digitizer on the Samsung Chromebook Plus (kevin). A follow-on patch will specify the override mode for kevin devices. Changes in v2: - None Changes in v3: - None Cc: Doug Anderson <dianders@chromium.org> Cc: Eric Anholt <eric@anholt.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: Sean Paul <seanpaul@chromium.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180208174855.55620-6-seanpaul@chromium.org
2018-03-12drm/panel: simple: Fix the bus format for the Ontat panelEric Anholt
This fixes bad color output. When I was first testing the device I had the DPI hardware set to 666 mode, but apparently in the refactor to use the bus_format information from the panel driver, I failed to actually update the panel. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: e8b6f561b2ee ("drm/panel: simple: Add the 7" DPI panel from Adafruit") Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180309233332.1769-1-eric@anholt.net
2017-11-17drm/panel: simple: Add Mitsubishi AA070MC01 panel supportLukasz Majewski
The Mitsubishi AA070MC01 is a 7.0" WVGA (800x480) TFT panel working in 8 bit ISP mode (pin 19 "mode" HIGH for 20 pin TFT connector). Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1508537917-1723-1-git-send-email-lukma@denx.de
2017-11-17drm/panel: simple: Add Tianma TM070RVHG71 panel supportLukasz Majewski
The Tianma TM070RVHG71 is a 7" WVGA (800x480) TFT LCD panel connected via LVDS and can be supported by the simple-panel binding. Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171107153058.5554-1-lukma@denx.de
2017-10-19drm/panel: simple: add Toshiba LT089AC19000Lucas Stach
Only exposes a single mode and not a complete display timing, as the datasheet is rather vague about the minimum/maximum values. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171018172240.8772-1-l.stach@pengutronix.de
2017-10-18drm/panel: simple: add delays for Innolux AT043TN24Philipp Zabel
The delays between video data and backlight enable and between backlight disable and end of video data are given as >= 160 ms in the datasheet. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-3-p.zabel@pengutronix.de
2017-10-18drm/panel: simple: add bus flags for Innolux AT043TN24Philipp Zabel
For LCD interface controllers that support configuring polarity of pixel clock and data enable signal, specify bus flags in the panel descriptor. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-2-p.zabel@pengutronix.de
2017-10-18drm/panel: simple: fix vertical timings for Innolux AT043TN24Philipp Zabel
The vsync length should be 10 lines, as specified in the data sheet. This gets the actual refresh rate closer to nominal 60 Hz given the 9 MHz pixel clock. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171011125958.23064-1-p.zabel@pengutronix.de
2017-08-18drm/panel: simple: Remove unneeded gpiod NULL checkFabio Estevam
The gpiod API checks for NULL descriptors, so there is no need to duplicate the check in the driver. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500249939-8075-1-git-send-email-festevam@gmail.com
2017-08-18drm/panel: simple: Add missing panel_simple_unprepare() callsJonathan Liu
During panel removal or system shutdown panel_simple_disable() is called which disables the panel backlight but the panel is still powered due to missing calls to panel_simple_unprepare(). Fixes: d02fd93e2cd8 ("drm/panel: simple - Disable panel on shutdown") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170807115545.27747-1-net147@gmail.com
2017-08-18drm/panel: simple: Fix width and height for Olimex LCD-OLinuXino-4.3TSJonathan Liu
The physical size of the panel is 105.5 (W) x 67.2 (H) x 4.05 (D) mm but the active display area is 95.04 (W) x 53.856 (H) mm. The width and height should be set to the active display area. Signed-off-by: Jonathan Liu <net147@gmail.com> Fixes: cf5c9e6dc70d ("drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170720102943.25091-1-net147@gmail.com
2017-08-18drm/panel: simple: Skip error message on deferred probeFabio Estevam
When enable_gpio is provided via an I2C or SPI expander, it may not be available when panel-simple probes leading to the following error: panel-simple panel: failed to request GPIO: -517 As this error message is not very useful to the end user, skip printing it in the case of deferred probe. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1498857286-10820-1-git-send-email-festevam@gmail.com
2017-06-14drm/panel: simple: add support for AUO P320HVN03Lucas Stach
This adds support for the AU Optronics Corporation 31.5" FHD (1920x1080) LVDS TFT LCD panel, which can be supported by the simple panel driver Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-4-l.stach@pengutronix.de
2017-06-14drm/panel: simple: add support for NLT NL192108AC18-02DLucas Stach
This adds support for the NLT Technologies NL192108AC18-02D 15.6" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Timings are taken from the preliminary datasheet, as a final one is not yet available. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-3-l.stach@pengutronix.de
2017-06-14drm/panel: simple: add support for NEC NL12880B20-05Lucas Stach
This adds support for the NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-1-l.stach@pengutronix.de
2017-04-06drm/panel: simple: Add support for Winstar WF35LTIACDRichard Genoud
This adds support for the Winstar Display Co. WF35LTIACD 3.5" QVGA TFT LCD panel, which can be supported by the simple panel driver. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-06drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01HYannick Fertre
Add simple-panel support for the Ampire AM-480272H3TMQW-T01H, which is a 4.3" WQVGA panel. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-26drm/panel: simple: Specify bus width and flags for EDT displaysStefan Agner
The display has a 18-Bit parallel LCD interface, require DE to be active high and data driven by the controller on falling pixel clock edge (display samples on rising edge). Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-26drm/panel: simple: Add Netron DY E231732Maxime Ripard
The E231732 is a 7" panel with a resolution of 1024x600. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [treding@nvidia.com: add missing device tree binding] Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-26drm/panel: simple: Add support for Tianma TM070JDHG30Gary Bisson
The Tianma TM070JDHG30 is a 7" LVDS display with a resolution of 1280x800. http://usa.tianma.com/products-technology/product/tm070jdhg30-00 You can also find this product along with a FT5x06 touch controller from Boundary Devices: https://boundarydevices.com/product/bd070lic2/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-01-26drm/panel: simple: Add support BOE NV101WXMN51Caesar Wang
The BOE NV101WXMN51 is a 10.1" WXGA color active matrix TFT LCD module using amorphous silicon TFT's as an active switching devices. It can be supported by the simple-panel driver. Read the panel default EDID information: EDID MODE DETAILS name = <NULL> pixel_clock = 71900 lvds_dual_channel = 0 refresh = 0 ha = 1280 hbl = 160 hso = 48 hspw = 32 hborder = 0 va = 800 vbl = 32 vso = 3 vspw = 5 vborder = 0 phsync = + pvsync = - x_mm = 0 y_mm = 0 drm_display_mode .hdisplay = 1280 .hsync_start = 1328 .hsync_end = 1360 .htotal = 1440 .vdisplay = 800 .vsync_start = 803 .vsync_end = 808 .vtotal = 832 There are two modes in the EDID: Detailed mode1: Clock 71.900 MHz, 216 mm x 135 mm 1280 1328 1360 1440 hborder 0 800 803 808 832 vborder 0 +hsync -vsync Detailed mode2: Clock 57.500 MHz, 216 mm x 135 mm 1280 1328 1360 1440 hborder 0 800 803 808 832 vborder 0 +hsync -vsync Support both of these modes on the panel. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06drm/panel: simple: Add support for AUO G185HAN01Lucas Stach
This adds support for the AU Optronics G185HAN01 18.5" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06drm/panel: simple: Add support for AUO G133HAN01Lucas Stach
This adds support for the AU Optronics G133HAN01 13.3" LVDS FullHD TFT LCD panel, which can be supported by the simple panel driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06drm/panel: simple: Add more properties to Innolux G121I1-L01Lucas Stach
Convert from a single mode to display timings, which allow to describe the minimum/maximium blanking and clock rates, add enable/disable delays and provide the bus format. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06drm/panel: simple: Add bits-per-component for Sharp LQ123P1JX31zain wang
The Sharp LQ123P1JX31 panel support 8 bits per component. Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-12-06drm/panel: simple: Check against num_timings when setting preferred for timingChen-Yu Tsai
In the loop on .timings, we should check .num_timings to see if it's the only mode specified, not .num_modes, which should be used with .modes. Fixes: cda553725c92 ("drm/panel: simple: Set appropriate mode type") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-28 01:52:42 +0000