summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2018-11-02Merge tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Pretty much a normal fixes pull pre-rc1, mostly amdgpu fixes, one i915 link training regression fix, and a couple of minor panel/bridge fixes and a panel quirk" * tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default" drm/amd/pp: Print warning if od_sclk/mclk out of range drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10 drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7 drm/amd/powerplay: no MGPU fan boost enablement on DPM disabled drm/amdgpu: Fix skipping hangged job reset during gpu recover. drm/amd/powerplay: revise Vega20 pptable version check drm/amd/display: set backlight level limit to 1 drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 drm/bridge: ti-sn65dsi86: Remove the mystery delay drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM drm/panel: simple: Support panels with HPD where HPD isn't connected dt-bindings: drm/panel: simple: Add no-hpd property drm/edid: Add 6 bpc quirk for BOE panel. drm/amdgpu: fix reporting of failed msg sent to SMU (v2) drm/amdgpu: Fix compute ring 1.0.0 failure after reset drm/amdgpu: fix VM leaf walking drm/amdgpu: fix amdgpu_vm_fini drm/amd/powerplay: commonize the API for retrieving current clocks ...
2018-11-02drm/i915/fia: FIA registers offset implementation.Anusha Srivatsa
The registers DPCSSS,DPSP,DPMLE1 and DPPMS are all at an offset from the base - which is the FLexi IO Adaptor. Lets follow the offset calculation while accessing these registers. v2: - Follow spec for numbering - s/0/1(Lucas) - s/FIA_1/FIA1_BASE (Anusha) v3: - Remove register offset defines. (Jani) - Update comment. (Anusha) v4: rebase. Remove comment.(Lucas) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101185557.29585-1-anusha.srivatsa@intel.com
2018-11-02drm/i915: Allow "max bpc" property to limit pipe_bppRadhakrishna Sripada
Use the newly added "max bpc" connector property to limit pipe bpp. V3: Use drm_connector_state to access the "max bpc" property V4: Initialize the drm property, add suuport to DP(Ville) V5: Use the property in the connector and fix CI failure(Ville) V6: Use the core function to attach max_bpc property, remove the redundant clamping of pipe bpp based on connector info V7: Fix Checkpatch warnings V9: Cleanup connected_sink_max_bpp and fix initial value in DP(Ville) V12: Fix debug message(Ville) V13: Remove the redundant check and simplify the check logic(Stan) V14: Fix the check in connected_sink_max_bpp(Stan) v15 (From Manasi): Add missing break (Stan) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Kishore Kadiyala <kishore.kadiyala@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023014400.16055-1-manasi.d.navare@intel.com
2018-11-02drm: Add connector property to limit max bpcRadhakrishna Sripada
At times 12bpc HDMI cannot be driven due to faulty cables, dongles level shifters etc. To workaround them we may need to drive the output at a lower bpc. Currently the user space does not have a way to limit the bpc. The default bpc to be programmed is decided by the driver and is run against connector limitations. Creating a new connector property "max bpc" in order to limit the bpc. xrandr can make use of this connector property to make sure that bpc does not exceed the configured value. This property can be used by userspace to set the bpc. V2: Initialize max_bpc to satisfy kms_properties V3: Move the property to drm_connector V4: Split drm and i915 components(Ville) V5: Make the property per connector(Ville) V6: Compare the requested bpc to connector bpc(Daniel) Move the attach_property function to core(Ville) V7: Fix checkpatch warnings V8: Simplify the connector check code(Ville) V9: Const display_info(Ville) V10,V11: Fix CI issues. V12: Add the Kernel documentation(Daniel) V14: Crossreference the function name in the doc(Daniel) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kishore Kadiyala <kishore.kadiyala@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Sunpeng Li <sunpeng.li@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012184233.29250-1-radhakrishna.sripada@intel.com
2018-11-02drm/selftests: Fix build warning -Wframe-larger-thanAlexandru-Cosmin Gheorghe
It seems for some random configuration drm_device is bigger than 2048 bytes. The fix is to make the mock objects static variables. Bug reported by 0-DAY Kernel test infrastructure here: https://lists.01.org/pipermail/kbuild-all/2018-November/054431.html Fixes: 6ff3d9ffdcbb ("drm/selftests: Add tests for drm_internal_framebuffer_create") Signed-off-by: Alexandru-Cosmin Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102130103.7753-1-alexandru-cosmin.gheorghe@arm.com
2018-11-02drm/i915: Update DRIVER_DATE to 20181102Jani Nikula
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-02drm/selftests: Add tests for drm_internal_framebuffer_createAlexandru Gheorghe
Add tests that verify that drm_internal_framebuffer_create creates buffers correctly by creating a dummy drm_device with a mock function for the fb_create callback. To decide if a buffer has been created or not it just checks if fb_create callback has been called for the particular drm_mode_fb_cmd2 that's being tested. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-8-alexandru-cosmin.gheorghe@arm.com
2018-11-02drm: Add macro to export functions only when CONFIG_DRM_DEBUG_SELFTEST is ↵Alexandru Gheorghe
enabled If we want to be able to write drmselftests for non-static core functions that are not intended to be used by drivers we need this functions to be exported. This adds a macro that is tied of CONFIG_DRM_DEBUG_SELFTEST, and uses that to export drm_internal_framebuffer_create, in order for subsequent patches to be able to test it. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-7-alexandru-cosmin.gheorghe@arm.com
2018-11-02drm/selftests: Add tests for drm_format_info* helpersAlexandru Gheorghe
Add selftests for the following newly added functions: - drm_format_info_block_width - drm_format_info_block_height - drm_format_info_min_pitch Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-6-alexandru-cosmin.gheorghe@arm.com
2018-11-02drm: Extend framebuffer_check to handle formats with cpp/char_per_block 0Alexandru Gheorghe
For formats that are supported only with non-linear modifiers it doesn't make to much sense to define cpp or char_per_block, so that will be set to 0. This patch adds a restriction to force having a modifier attached when cpp/char_per_block is 0, and to bypass checking the pitch restriction. This had been discussed here. [1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&highlight_names=&date=2018-09-13&show_html=true Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-5-alexandru-cosmin.gheorghe@arm.com
2018-11-02drm: mali-dp: Enable Mali-DP tiled buffer formatsAlexandru Gheorghe
Enable the following formats - DRM_FORMAT_X0L0: DP650 - DRM_FORMAT_X0L2: DP550, DP650 Reviewed-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-4-alexandru-cosmin.gheorghe@arm.com
2018-11-02drm/fourcc: Add fourcc for Mali linear tiled formatsAlexandru Gheorghe
Mali-DP implements a number of tiled yuv formats which are not currently described in drm_fourcc.h. This adds those definitions and describes their memory layout by using the newly added char_per_block, block_w, block_h. Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-3-alexandru-cosmin.gheorghe@arm.com
2018-11-02drm/fourcc: Add char_per_block, block_w and block_h in drm_format_infoAlexandru Gheorghe
For some pixel formats .cpp structure in drm_format info it's not enough to describe the peculiarities of the pixel layout, for example tiled formats or packed formats at bit level. What's implemented here is to add three new members to drm_format_info that could describe such formats: - char_per_block[3] - block_w[3] - block_h[3] char_per_block will be put in a union alongside cpp, for transparent compatibility with the existing format descriptions. Regarding, block_w and block_h they are intended to be used through their equivalent getters drm_format_info_block_width / drm_format_info_block_height, the reason of the getters is to abstract the fact that for normal formats block_w and block_h will be unset/0, but the methods will be returning 1. Additionally, convenience function drm_format_info_min_pitch had been added that computes the minimum required pitch for a given pixel format and buffer width. Using that the following drm core functions had been updated to generically handle both block and non-block formats: - drm_fb_cma_get_gem_addr: for block formats it will just return the beginning of the block. - framebuffer_check: Use the newly added drm_format_info_min_pitch. - drm_gem_fb_create_with_funcs: Use the newly added drm_format_info_min_pitch. - In places where is not expecting to handle block formats, like fbdev helpers I just added some warnings in case the block width/height are greater than 1. Changes since v3: - Add helper function for computing the minimum required pitch. - Improve/cleanup documentation Changes since v8: - Fixed build on 32bits arm architectures, with: - return DIV_ROUND_UP((u64)buffer_width * info->char_per_block[plane], + return DIV_ROUND_UP_ULL((u64)buffer_width * info->char_per_block[plane], Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101170055.5433-1-alexandru-cosmin.gheorghe@arm.com
2018-11-02drm/panel: Add simple panel mode for the ARM RTSMLinus Walleij
Having failed any attempts at a more generic solution, I fall back to the very specific solution: define a simple panel for the ARM RTSM emulated platforms. I am doing this so we can convert all old users from the previous fbdev driver to the PL111 DRM driver. This works fine as far as I can test, provided the device tree for RTSM AEMv8 is augmented accordingly. Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181026111334.3365-1-linus.walleij@linaro.org
2018-11-02drm/i915: also group device info array helper macros with othersJani Nikula
Keep the register choosing macros together. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-4-jani.nikula@intel.com
2018-11-02drm/i915: reorder and reindent the register choosing helper wrappersJani Nikula
Try to make it slightly less of an eye sore. No functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-3-jani.nikula@intel.com
2018-11-02drm/i915: define _MMIO_PLANE() in terms of _PLANE() not _MMIO_PIPE()Jani Nikula
Minor semantic nit, no functional changes. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-2-jani.nikula@intel.com
2018-11-02drm/i915: remove palette_offsets from device info in favor of _PICK()Jani Nikula
The device info offset arrays for unevenly spaced register offsets is great for widely used registers. However, the palette registers are only used in one function, i9xx_load_luts_internal(), and only for GMCH platforms, wasting device info. Replace palette_offsets with _PICK() in palette register definition. While the use of _PICK() does not check for pipe C existence, neither does the current offset array usage, and leads to bogus address when pipe C is passed to PALETTE() on non-CHV. Using _PICK() at least leads to a sensible register offset, just non-existing on non-CHV. Either way, this shouldn't happen anyway. Remove unused old palette macros while at it. Bloat-o-meter results below for completeness. add/remove: 0/0 grow/shrink: 3/6 up/down: 94/-278 (-184) Function old new delta i9xx_load_luts_internal 394 483 +89 i915_driver_load 5103 5107 +4 g4x_pre_enable_dp 378 379 +1 intel_engines_init_mmio 1117 1116 -1 intel_engine_lookup_user 47 46 -1 hdmi_port_clock_valid 310 309 -1 gen11_irq_handler 707 706 -1 intel_device_info_dump_runtime 329 311 -18 intel_device_info_runtime_init 5166 4910 -256 Total: Before=918650, After=918466, chg -0.02% add/remove: 0/0 grow/shrink: 0/48 up/down: 0/-576 (-576) Data old new delta intel_valleyview_info 200 188 -12 intel_skylake_gt4_info 200 188 -12 intel_skylake_gt3_info 200 188 -12 intel_skylake_gt2_info 200 188 -12 intel_skylake_gt1_info 200 188 -12 intel_sandybridge_m_gt2_info 200 188 -12 intel_sandybridge_m_gt1_info 200 188 -12 intel_sandybridge_d_gt2_info 200 188 -12 intel_sandybridge_d_gt1_info 200 188 -12 intel_pineview_info 200 188 -12 intel_kabylake_gt3_info 200 188 -12 intel_kabylake_gt2_info 200 188 -12 intel_kabylake_gt1_info 200 188 -12 intel_ivybridge_q_info 200 188 -12 intel_ivybridge_m_gt2_info 200 188 -12 intel_ivybridge_m_gt1_info 200 188 -12 intel_ivybridge_d_gt2_info 200 188 -12 intel_ivybridge_d_gt1_info 200 188 -12 intel_ironlake_m_info 200 188 -12 intel_ironlake_d_info 200 188 -12 intel_icelake_11_info 200 188 -12 intel_i965gm_info 200 188 -12 intel_i965g_info 200 188 -12 intel_i945gm_info 200 188 -12 intel_i945g_info 200 188 -12 intel_i915gm_info 200 188 -12 intel_i915g_info 200 188 -12 intel_i865g_info 200 188 -12 intel_i85x_info 200 188 -12 intel_i845g_info 200 188 -12 intel_i830_info 200 188 -12 intel_haswell_gt3_info 200 188 -12 intel_haswell_gt2_info 200 188 -12 intel_haswell_gt1_info 200 188 -12 intel_gm45_info 200 188 -12 intel_geminilake_info 200 188 -12 intel_g45_info 200 188 -12 intel_g33_info 200 188 -12 intel_coffeelake_gt3_info 200 188 -12 intel_coffeelake_gt2_info 200 188 -12 intel_coffeelake_gt1_info 200 188 -12 intel_cherryview_info 200 188 -12 intel_cannonlake_info 200 188 -12 intel_broxton_info 200 188 -12 intel_broadwell_rsvd_info 200 188 -12 intel_broadwell_gt3_info 200 188 -12 intel_broadwell_gt2_info 200 188 -12 intel_broadwell_gt1_info 200 188 -12 Total: Before=195529, After=194953, chg -0.29% Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-1-jani.nikula@intel.com
2018-11-02Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Although there's nothing crucial missing, it's been a long time since the last backmerge. Catch up with drm-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-02Merge tag 'drm-intel-next-fixes-2018-10-25' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix to avoid link retraining workaround on eDP (the other is a comment change) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025131836.GA2296@jlahtine-desk.ger.corp.intel.com
2018-11-01drm/i915/icl: Fix DSS_CTL register namesAnusha Srivatsa
This patch fixes the naming of the registers: s/PIPE_DSS_CTL/ICL_PIPE_DSS_CTL And also fix the hex values to lower case, to match rest of the definitions. Manasi noticed this with the patch that was merged. v2: fix "Fixes" tag. Fixes: 8b1b558d690a ("drm/i915/icl: Add DSS_CTL Registers") Suggested-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101214216.8958-1-anusha.srivatsa@intel.com
2018-11-01Merge branch 'work.afs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
2018-11-02Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next - Fix flickering at low backlight levels on some systems - Fix some overclocking regressions - Vega20 updates for - GPU recovery fixes - Disable gfxoff on RV as some sbios/fw combinations are not stable yet Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101151939.2828-1-alexander.deucher@amd.com
2018-11-02drm/i915/icl+: Sanitize port to PLL mappingImre Deak
BIOS can leave the PLL to port mapping enabled, even if the corresponding encoder is disabled. Disable the port mapping in this case. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-9-imre.deak@intel.com
2018-11-02drm/i915: Configure AUX_CH_CTL when enabling the AUX power domainImre Deak
Most of the AUX_CH_CTL flags are concerned with DP AUX transfer parameters. As opposed to this the flag specifying the thunderbolt vs. non-thunderbolt mode of the port is not related to AUX transfers at all (rather it's repurposed to enable either TBT or non-TBT PHY HW blocks). The programming has to be done before enabling the corresponding AUX power well, so make it part of the power well code. v3: - Use existing enable/disable helpers instead of opencoding. (Jose) - Fix type of is_tc_tbt to remain a bitfield. (Lucas) - Add comment describing the is_tc_tbt power well flag. (Lucas) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108548 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-8-imre.deak@intel.com
2018-11-02drm/i915: Enable AUX power for HDMI DDI/TypeC main link tooImre Deak
DDI/TypeC ports need the AUX power domain for main link functionality even when they operate in HDMI static mode, so enable the power domain for these ports too. v4: - Rebase on the upstream ICL pre_pll_enable change. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-7-imre.deak@intel.com
2018-11-02drm/i915: Enable AUX power earlierImre Deak
For DDI/TypeC ports the AUX power domain needs to be enabled before the port's PLL is enabled, so move the enabling earlier accordingly. v2: - Preserve the pre_pll hook for GEN9_LP. (Ville) v3: - Add related BSpec entries to commit log. (Jose) v4: - Rebase on the upstream ICL pre_pll_enable change. BSpec: 21750, 22243 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-6-imre.deak@intel.com
2018-11-02drm/i915: Use a helper to get the aux power domainImre Deak
From ICL onwards the AUX power domain may change dynamically based on whether a DDI/TypeC port is in thunderbolt or non-thunderbolt mode, so use a helper function instead of a static field to get the current domain. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-5-imre.deak@intel.com
2018-11-02drm/i915: Init aux_ch for HDMI ports tooImre Deak
From ICL onwards DDI/TypeC ports - even in HDMI static mode - need to know which AUX CH belongs to them, so initialize aux_ch for those ports too. For consistency do this for all HDMI ports, not only for DDI/TypeC ones. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-4-imre.deak@intel.com
2018-11-02drm/i915: Move aux_ch to intel_digital_portImre Deak
From ICL onwards all DDI/TypeC ports - even working in HDMI mode - need to know their corresponding AUX CH, so move the field to a common struct. No functional change. v3: - Add code comment about which ports aux_ch is used for. (Jose) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-3-imre.deak@intel.com
2018-11-02drm/i915: Move intel_aux_ch() to intel_bios.cImre Deak
From ICL onwards all the DDI/TypeC ports - even working in HDMI mode - need to know their corresponding AUX channel, so move the corresponding helper to a common place. No functional change. v4: - Fix 'no space is necessary after a cast' checkpatch warn. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-2-imre.deak@intel.com
2018-11-01drm/i915/icl: WaAllowUMDToModifySamplerModeOscar Mateo
Required for Bindless samplers. Userspace consumer: mesa V2: Rebase V3: Update commit message Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-4-radhakrishna.sripada@intel.com
2018-11-01drm/i915/icl: WaAllowUMDToModifyHalfSliceChicken7Oscar Mateo
Required to dinamically set 'Trilinear Filter Quality Mode' Userpsace consumer is mesa. V2: Rebase V3: Update commit message Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-3-radhakrishna.sripada@intel.com
2018-11-01drm/i915/icl: Implement Display WA_1405510057Radhakrishna Sripada
Display WA_1405510057 asks to not enable YUV 420 HDMI 10bpc when horizontal blank size mod 8 reminder is 2. V2: Rebase(r-b: Anusha) V3: crtc_state->s/ycbcr420/output_format/ Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-2-radhakrishna.sripada@intel.com
2018-11-01drm/i915/icl: Add WaEnable32PlaneModeRadhakrishna Sripada
Gen11 Display suports 32 planes in total. Enable the new format in context status to be used and expanded to 32 planes. V2: Move the WA to display WA's(Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-1-radhakrishna.sripada@intel.com
2018-11-01drm/i915: Remove CNL from WA 827Rodrigo Vivi
CNL A stepping was the only affected there. But also it is time to clean old pre-production CNL Workarounds, so let's just remove and clean this W/A. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-4-rodrigo.vivi@intel.com
2018-11-01drm/i915: Define WA 0870 and kill dead code.Rodrigo Vivi
Let's introduce the WA number that is the cause of having NV12 disabled on both SLK and BXT. According to Spec: WA 0870: "Display flickers with NV12 video playback in Y tiling mode. WA: Use YUV422 surface format instead of NV12." v2: remove the useless dead code and consequently avoiding device info flag. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-3-rodrigo.vivi@intel.com
2018-11-01drm/i915: Kill WA 0826Rodrigo Vivi
According to BSpec this is not needed anymore: "This workaround is no longer needed since NV12 support is dropped for the affected projects. " Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-2-rodrigo.vivi@intel.com
2018-11-01drm/i915: Kill WA 0528Rodrigo Vivi
First of all I believe this WA as written here was wrong. Because it is listed on BSpec only for SKL and BXT, exactly the only 2 platforms skipped here. But also it is written there that we don't need this WA anymore: "This workaround is no longer needed since NV12 support is dropped for the affected projects in #0870." SO, let's kill it. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-1-rodrigo.vivi@intel.com
2018-11-01drm/i915/icl: Fix DC9 Suspend for ICL.Anusha Srivatsa
Add missing block that takes care of inline intel_suspend_complete for DC9 on ICL. Daniele noticed this was part of original patch but missed on on merged commit ("drm/i915/icl: Enable DC9 as lowest possible state during screen-off"). Fixes: 3e68928b7d4c ("drm/i915/icl: Enable DC9 as lowest possible state during screen-off") Cc: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [Rodrigo added a commit message while merging] Link: https://patchwork.freedesktop.org/patch/msgid/20181031202726.4021-1-anusha.srivatsa@intel.com
2018-11-01drm: Remove 80-column line in drm_mode_object.cShayenne da Luz Moura
Break line after NULL to decrease the line size. Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181031174424.odljb6obj25wm47d@smtp.gmail.com
2018-11-01drm/i915/icl: Add DSS_CTL RegistersAnusha Srivatsa
Add defines for DSS_CTL registers. These registers specify the big joiner, splitter, overlap pixels and info regarding compression enabled on left or right branch. v2: - rebase. Remove overlapping defines(James Ausmus) - Rename the register to ICL_DSS_CTL1/2_PIPE_ (manasi) - take pixels as an argument for overlap.(Manasi) v3: - rebase. merge DSS_CTL1/2 introduced in Madhav's patch to avoid confusion (madhav chauhan) - Rename registers in accordance to BSpec (Madhav, Rodrigo) - Add define to conditionally check the buffer target depth (James Ausmus) v4: - remove redundant definitions.(madhav) v5: - Add mask for overlap pixels. - Code Style changes.(Madhav) v6: - Code style changes. (Madhav) Suggested-by: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Cc: Gaurav Singh <gaurav.k.singh@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/07021336cb87d09e8f97fbff709c4e686d7de536.1540900289.git.jani.nikula@intel.com
2018-11-01drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default"Christian König
This is still completely breaking my Raven system. This reverts commit cdf2f910fa969adca1b0e3ad2b487821233dc038. Revert until we sort out the sbios and firmware combinations that work correctly. bug: https://bugs.freedesktop.org/show_bug.cgi?id=108606 Cc: stable@vger.kernel.org # v4.19 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01drm/amd/pp: Print warning if od_sclk/mclk out of rangeRex Zhu
print warning in dmesg to notify user the setting for sclk_od/mclk_od out of range that vbios can support Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10Rex Zhu
not update dpm table with user's setting. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7Rex Zhu
not update the dpm table with user's setting Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01drm/amd/powerplay: no MGPU fan boost enablement on DPM disabledEvan Quan
As MGPU fan boost feature will be definitely not needed when DPM is disabled. So, there is no need to error out. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01drm/amdgpu: Fix skipping hangged job reset during gpu recover.Andrey Grodzovsky
Problem: During GPU recover DAL would hang in amdgpu_pm_compute_clocks->amdgpu_fence_wait_empty Fix: Turns out there was a typo introduced by 3320b8d drm/amdgpu: remove job->ring which caused skipping amdgpu_fence_driver_force_completion and so the hangged job was never force signaled and this would cause the hang later in DAL. Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-01drm/tilcdc: Use drm_fbdev_generic_setup()Noralf Trønnes
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jyri Sarha <jsarha@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-9-noralf@tronnes.org
2018-11-01drm/sun4i: Use drm_fbdev_generic_setup()Noralf Trønnes
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-8-noralf@tronnes.org
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-29 03:23:48 +0000