| Age | Commit message (Collapse) | Author |
|---|
|
[Why]
We are missing the DP info frame update on dcn30, and this will
lead to DP SDPs not being sent;
[How]
Add the DP info frame update for dcn30;
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
dcn30_link_encoder_validate_output_with_stream was a static function.
[How]
remove the static define and include it in the header.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Find out when we try to disable CRC calculation,
crc generation is still enabled. Main reason is
that dc_stream_configure_crc() will never get
called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE.
[How]
Add checking condition that when source is
AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call
dc_stream_configure_crc() to disable crc calculation.
Also, clean up crc window when disable crc calculation.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Many VR headsets require a HSYNC width of 4, but DCN
has default minimum of 8.
[How]
Change the arbitrary minimum HSYNC width to 4 to match
DCN20.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
some DP_SEC register defs and masks are missing.
[How]
add the missing defs and masks.
Signed-off-by: Max Tseng <chuan-yu.tseng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There is a warning that triggers when pstate takes too long.
Pstate can take up to ~200us on Linux without hanging but
it is currently set to 40us.
[How]
Change the timeout for the warning to be 180us on Linux.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
skip load smu and sdma fw on sriov due to sos,
ta and asd fw have been skipped for SIENNA_CICHLID.
V2:
move asic check into smu11
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
CONFIG_DRM_AMD_DC_DCN3_0 is retired. drop it
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
S0ix only makes sense on APUs since they are part of the platform, so
only when the ASIC is APU should set amdgpu_acpi_is_s0ix_supported flag
to deal with the related situation.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Without doing the soft reset, register mmSDMA0_GFX_RB_WPTR's value could not be
reset to 0 when sdma block resumes. That would cause the ring buffer's read and
write pointers not equal and ring test fail. So add the soft reset step.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These are supported by Sienna Cichlid and should be
taken into consideration during DS control.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is needed for Sienna Cichlid.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is needed for Sienna Cichlid.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fulfill the UMD PSTATE profiling clocks of sienna cichlid.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull (less than what git shortlog provides):
* dma-buf: Fix docs
* mxsfb: Silence invalid error message
* radeon: Fix TTM multihop
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/X9i0X9mjHN9AZGD3@linux-uq9g
|
|
We only completely delete the BO from the LRU on destruction.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/404618/
|
|
Check the pin_count instead of the lru list is empty here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/404617/
|
|
If a CRTC is missing a legacy primary plane pointer, a lot of things
will be broken for user-space: fbdev stops working and the entire legacy
uAPI stops working.
Require all drivers to populate drm_crtc.primary to prevent these
issues. Warn if it's NULL.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-3-contact@emersion.fr
|
|
If a primary or cursor plane is not compatible with a CRTC it's attached
to via the legacy primary/cursor field, things will be broken for legacy
user-space.
v4: use drm_crtc_mask instead of BIT (Ville)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-2-contact@emersion.fr
|
|
The previous wording could be understood by user-space evelopers as "a
primary/cursor plane is only compatible with a single CRTC" [1].
Reword the planes description to make it clear the DRM-internal
drm_crtc.primary and drm_crtc.cursor planes are for legacy uAPI.
[1]: https://github.com/swaywm/wlroots/pull/2333#discussion_r456788057
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211184634.74534-1-contact@emersion.fr
|
|
The parameter of kfree function is NULL, so kfree code is useless, delete it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214134628.4937-1-zhengyongjun3@huawei.com
|
|
Driver code has no business with the internals of the irq descriptor.
Aside of that the count is per interrupt line and therefore takes
interrupts from other devices into account which share the interrupt line
and are not handled by the graphics driver.
Replace it with a pmu private count which only counts interrupts which
originate from the graphics card.
To avoid atomics or heuristics of some sort make the counter field
'unsigned long'. That limits the count to 4e9 on 32bit which is a lot and
postprocessing can easily deal with the occasional wraparound.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://lore.kernel.org/r/20201210194043.957046529@linutronix.de
|
|
Nothing uses the result and nothing should ever use it in driver code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20201210194043.862572239@linutronix.de
|
|
Panel drivers can send DSI commands in panel's prepare(), which happens
before the bridge's enable() is called. The OMAP DSI driver currently
only sets up the DSI interface at bridge's enable(), so prepare() cannot
be used to send DSI commands.
This patch fixes the issue by making it possible to enable the DSI
interface any time a command is about to be sent. Disabling the
interface is be done via delayed work.
Clarifications for the delayed disable work and the panel doing DSI
transactions:
bridge_enable: If the disable callback is called just before
bridge_enable takes the dsi_bus_lock, no problem, bridge_enable just
enables the interface again. If the callback is ran just after
bridge_enable's dsi_bus_unlock, no problem, dsi->video_enabled == true
so the callback does nothing.
bridge_disable: similar to bridge-enable, the callback won't do anything
if video_enabled == true, and after bridge-disable has turned the video
and the interface off, there's nothing to do for the callback.
omap_dsi_host_detach: this is called when the panel does
mipi_dsi_detach(), and we expect the panel to _not_ do any DSI
transactions after (or during) mipi_dsi_detatch(), so there are no
race conditions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-85-tomi.valkeinen@ti.com
|
|
We only need to set VC_CTRL:DCS_CMD_ENABLE for command mode panels when
the HW has DSI_QUIRK_DCS_CMD_CONFIG_VC quirk. The old code did this
right by accident, but now we set DCS_CMD_ENABLE for video mode panels
too.
Fix this by skipping the set for video mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-84-tomi.valkeinen@ti.com
|
|
ULPS is a niche power-saving feature which only really affects command
mode panels showing a static picture. I know the ULPS code used to work
very long time ago, but I could not get it working with the current
driver. As the ULPS code is not trivial and includes delayed work (so
lots of chances for race issues), and just keeping DSI video and command
mode panels working has been challenging enough even without ULPS, lets
remove ULPS support.
When the DSI driver works reliably for command and video mode displays,
someone interested can work on ULPS and add it back if the power saving
is substantial enough.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-83-tomi.valkeinen@ti.com
|
|
The driver ignores MIPI_DSI_CLOCK_NON_CONTINUOUS, and always uses
non-continuous clock.
Fix this by using MIPI_DSI_CLOCK_NON_CONTINUOUS and at the same time,
drop ddr_clk_always_on field which seems pretty useless.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-82-tomi.valkeinen@ti.com
|
|
Clean up the code by separating video-mode enable/disable code into
functions of their own.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-81-tomi.valkeinen@ti.com
|
|
As we now have a fixed setup for VCs (VC0 for video stream, VC1 for
commands), we can simplify the VC setup.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-80-tomi.valkeinen@ti.com
|
|
The function names have evolved to be very confusing, and bunch of them
have "display" in them even if the function doesn't deal with display as
such (e.g. dsi_display_enable which just enables the DSI interface).
Rename them by dropping the "display".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-79-tomi.valkeinen@ti.com
|
|
We can drop dsi_display_disable() which just calls
_dsi_display_disable(), and rename _dsi_display_disable() to
dsi_display_disable().
The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_disable is extra and
can be dropped, as _dsi_display_disable() has the same WARN_ON().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-78-tomi.valkeinen@ti.com
|
|
We can drop dsi_display_enable(), which just calls
_dsi_display_enable(), and rename _dsi_display_enable() to
dsi_display_enable().
The WARN_ON(!dsi_bus_is_locked(dsi)) in dsi_display_enable is extra and
can be dropped, as _dsi_display_enable() has the same WARN_ON().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-77-tomi.valkeinen@ti.com
|
|
Clean up the code by inlining dsi_enable_video_outputs and
dsi_disable_video_outputs functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-76-tomi.valkeinen@ti.com
|
|
Move structs and defines to a private dsi.h header file to make dsi.c a
bit easier to navigate. Also move the (now) private structs and defines
from omapdss.h to dsi.h.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-75-tomi.valkeinen@ti.com
|
|
Drop unneeded includes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-74-tomi.valkeinen@ti.com
|
|
Add a panel database to the driver instead of reading propertes from DT
data. This is similar to panel-simple, and I believe it's more future
safe way to handle the panels.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-73-tomi.valkeinen@ti.com
|
|
We have a useless 'if' in the dsicm_bl_update_status(), a left over from
the conversion to DRM model. Drop the if.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-72-tomi.valkeinen@ti.com
|
|
For command mode panels we can use a single VC for sending command and
video data, even if we have to change the data source for that VC when
going from command to video or vice versa.
However, with video mode panels we want to keep the pixel data VC
enabled, and use another VC for command data, and the commands will get
interleaved into the pixel data.
This patch makes the driver use VC0 for commands and VC1 for video.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-71-tomi.valkeinen@ti.com
|
|
We currently use a single VC for sending commands and pixel data. The
LP/HS mode for pixel data is correctly set to HS by accident, as we have
set the VC to HS already earlier.
However, if we use a different VC for video data, the VC is in LP mode.
Fix this by always enabling HS mode before starting a frame update.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-70-tomi.valkeinen@ti.com
|
|
Simplify and optimize dsi_vc_enable_hs() so that it can be called
without checking the current HS/LP mode. Make dsi_vc_enable_hs() return
if the VC is already in the correct mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-69-tomi.valkeinen@ti.com
|
|
DSI virtual channel and hardware VC blocks have gotten tangled as
described in the previous commits. This has not caused any issues, as
the value for both is 0, so it happens to work.
To fix the issue, change the code to use the correct one of the two.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-68-tomi.valkeinen@ti.com
|
|
To start fixing the issues related to channels and vcs described in the
previous commit, pass vc and/or channel to various functions which will
need it do properly handle different DSI channels and VCs.
No functional changes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-67-tomi.valkeinen@ti.com
|
|
The "channel" usage in omap dsi driver is confusing. We have three
different "channels":
1) DSI virtual channel ID. This is a number from 0 to 3, included in the
packet payload.
2) VC. This is a register block in the DSI IP. There are four of those
blocks. A VC is a DSI "pipeline", with defined fifo settings, data
source (cpu or dispc), and some other settings. It has no relation to
the 1).
3) dispc channel. It's the "pipeline" number dispc uses to send pixel
data.
The previous patch handled the third case.
To start fixing 1) and 2), we first rename all uses of 'channel' to
'vc', as in most of the cases that is the correct thing to use.
However, in some places 1) and 2) have gotten mixed up (i.e. the code
uses msg->channel when it should use vc), which will be fixed in the
following patch.
Note that mixing 1) and 2) currently is "fine", as at the moment we only
support DSI peripherals with DSI virtual channel 0, and we always use
VC0 to send data. So both 1) and 2) are always 0.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-66-tomi.valkeinen@ti.com
|
|
The "channel" usage in omap dsi driver is confusing. As the first step,
change "channel" to "dispc_channel" when dealing with the dispc channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-65-tomi.valkeinen@ti.com
|
|
A DSI peripheral can have virtual channel ID of 0-3. This should be
always the case, and there's no need in the driver to validate the
channel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-64-tomi.valkeinen@ti.com
|
|
The VC handling has gotten quite tangled up. As the first step to clean
it up, lets define that we only support a single DSI peripheral (which
was really already the case), and we always use VC0 (define VC_DEFAULT
0) register block to send data to the peripheral.
We can thus have a single mipi_dsi_device pointer and remove the
for-loops which made passes over all the four VCs (just the first one
was ever used).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-63-tomi.valkeinen@ti.com
|
|
The OMAP DSI command mode panel driver used to send page & column
address before each frame update, and this code was moved into the DSI
host driver when converting it to the DRM bridge model.
However, it's not really required to send the page & column address
before each frame. It's also something that doesn't really belong to the
DSI host driver, so we should drop the code.
That said, frame updates break if we don't send _something_ between the
frames. A NOP command does the trick.
It is not clear if this behavior is as expected from a DSI command mode
frame transfer, or is it a feature/issue with OMAP DSI driver, or a
feature/issue in the command mode panel used.
Most likely this is related to the following from the DSI spec:
"To enable PHY synchronization the host processor should periodically
end HS transmission and drive the Data Lanes to the LP state. This
transition should take place at least once per frame."
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-62-tomi.valkeinen@ti.com
|
|
Set the column & page address once during setup, instead of relying the
DSI host driver to set those.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-61-tomi.valkeinen@ti.com
|
|
The DSI host driver currently ignores the video mode flags in
client->mode_flags. Add the code to take the transfer mode from client's
mode_flags.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-60-tomi.valkeinen@ti.com
|
|
If the PLL calc function is given bad parameters, n_start/m_start may be
higher than n_stop/m_stop, which leads to the loops iterating through
the whole u32 number space.
Fix this by failing early on such cases.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-59-tomi.valkeinen@ti.com
|
