summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2018-11-05drm/amd/display: explicit uint64_t castingBhawanpreet Lakha
explicitly cast uint64_t in div64_u64_rem() Signed-off-by: vikrant mhaske <vikrant.mhaske@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: dc 3.2.02SivapiriyanKumarasamy
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: add dccg blockDmytro Laktyushkin
This adds the hw block as well as hooks up dppclk dto programming Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: rename dccg to clk_mgrDmytro Laktyushkin
In preparation for adding the actual dccg block since the current implementation of dccg is mor eof a clock manager than a hw block Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Retiring set_display_requirements in dm_pp_smu.h - part2Fatemeh Darbehani
[Why] In DCN we want direct DAL to SMU calls, with as little as possible interference by pplib. The reason for each pp_smu interface mapping to 1 SMU message is so we can have the sequencing of different SMU message in dal and shared across different OS. This will also simplify debugging as DAL owns this interaction and there's no confusion about division of ownership. [How] Part 2: Separate set_min_deep_sleep_dcfclk message from the SMU messages that are sent as part of dm_pp_apply_clock_for_voltage_request. Directly notify min dcfclk to smu Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Retiring set_display_requirements in dm_pp_smu.h - part1Fatemeh Darbehani
[Why] In DCN we want direct DAL to SMU calls, with as little as possible interference by pplib. The reason for each pp_smu interface mapping to 1 SMU message is so we can have the sequencing of different SMU message in dal and shared across different OS. This will also simplify debugging as DAL owns this interaction and there's no confusion about division of ownership. [How] Part 1: Separate set_min_deep_Sleep_dcfclk message from the SMU messages that are sent as part of dcn10_pplib_apply_display_requirements. Notify deep sleep dcfclk to smu directly Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Add link encoder dp_ycbcr420_supported feature flagEric Bernstein
[Why] Need separate feature flag for DP 4:2:0 support, since existing flag is used for HDMI [How] Added dp_ycbcr420_supported to struct encoder_feature_support Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: fix report display count logicEric Yang
[Why] Previous logic to update display count in commit_planes_do_stream_update doesn't cover all cases. [How] Update display count as part of clock updates. Count virtual stream as active to work around headless situation. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: expose hwseq functions and add registersNevenko Stupar
Make these functions non static and define registers for future use is_lower_pipe_tree_visible(); is_upper_pipe_tree_visible(); is_pipe_tree_visible(); dcn10_program_pte_vm(); set_hdr_multiplier(); update_dchubp_dpp() find_top_pipe_for_stream() Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: initialize dc_transfer_func->ctxDavid Francis
[Why] dc_transfer_func structs were being passed around with a null pointer, waiting for unsuspecting programmers to dereference it. [How] Initialize it Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Add support for Freesync 2 HDR and Content to Display MappingSivapiriyanKumarasamy
[Why] Freesync 2 HDR and support for HDR content outside the range of the HDR display require implementation on Dal 3 to better match Dal2. [How] Add support for Freesync HDR and mapping of source content to display ranges for better representation of HDR content. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: split dccg clock manager into asic foldersDmytro Laktyushkin
Currently dccg contains code related to every dcn revision in a single file. This change splits out the dcn parts of code into correct folders Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: clean up base dccg structDmytro Laktyushkin
Move things not accessed outside dccg block into dce specific struct Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Freesync does not engage on some displaysHarmanprit Tatla
[Why] Current render margin time is not sufficient to compute exit frame time for most monitors. [How] Declared render margin in FPS to compute a exit frame rate that is 4 FPS above the minimum FPS required to engage FreeSync. Also did code clean-up to remove redundancies. Signed-off-by: Harmanprit Tatla <htatla@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: remove safe_to_lower flag from dc, use 2 functions insteadDmytro Laktyushkin
This is done to keep things more readable, avoids a true/false flag in dc interface layer. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: move pplib/smu notification to dccg blockDmytro Laktyushkin
This is done to clear up the clock programming sequence since the only time we need to notify pplib is after clock update. This also renames the clk block to dccg, at the moment this block contains both clock management and dccg functionality. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: handle max_vstartup larger than vblank_endDmytro Laktyushkin
When vstartup is larger than vblank end we need to set v_fp2 to allow for this early start Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: dc 3.2.01Fatemeh Darbehani
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Steven Chiu <Steven.Chiu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amdgpu: fix sdma doorbell comments typoFrank.Min
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Frank.Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/radeon/r300: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced "Pass through." with "Fall through.", which is what GCC is expecting to find. Addresses-Coverity-ID: 114734 ("Missing break in switch") Addresses-Coverity-ID: 114735 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/radeon/r420: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357317 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amdkfd: Use kmemdup instead of duplicating its functionzhong jiang
kmemdup has implemented the function that kmalloc() + memcpy(). We prefer to kmemdup rather than code opened implementation. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/etnaviv: fix bogus fence complete check in timeout handlerLucas Stach
The GPU hardware fences and the job out-fences are on different timelines so it's wrong to compare them. Fix this by only looking at the out-fence. Cc: <stable@vger.kernel.org> Fixes: 2c83a726d6fb (drm/etnaviv: bring back progress check in job timeout handler) Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-11-05drm/vgem: Fix typo in driver feature flagsImre Deak
Fix typo in struct field initializer. Fixes: 3a6eb795641c ("drm/vgem: create a render node for vgem") Cc: Emil Velikov <emil.velikov@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105145428.5590-1-imre.deak@intel.com
2018-11-05drm/i915/gen9_lp: Fix DMC DC counter debugfs outputImre Deak
On GEN9 LP (BXT/GLK) DC6 is not supported, so don't print the counter on those platforms. So far we did this on GLK too. While at it warn if we forgot to adjust the printout properly for a new platform. (Rodrigo) Testcase: igt/pm_dc/dc6-dpms Cc: Jyoti Yadav <jyoti.r.yadav@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031200220.11608-1-imre.deak@intel.com
2018-11-05vga_switcheroo: Fix missing gpu_bound call at audio client registrationTakashi Iwai
The commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") added a new ops gpu_bound to be called when GPU gets bound. The patch overlooked, however, that vga_switcheroo_enable() is called only once at GPU is bound. When an audio client is registered after that point, it would miss the gpu_bound call. This leads to the unexpected lack of runtime PM in HD-audio side. For addressing that regression, just call gpu_bound callback manually at vga_switcheroo_register_audio_client() when the GPU was already bound. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201615 Fixes: 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU") Cc: <stable@vger.kernel.org> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-05drm/i915/icl: Configure MG DP mode for HDMI ports tooImre Deak
The MG DP mode needs to be configured for Type C static/fixed/legacy HDMI ports too, the same way as it's configured for Type C static/fixed/legacy, fix this. Bspec: 4232, 21735 Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Tested-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102192656.4472-3-imre.deak@intel.com
2018-11-05drm/i915/icl: Configure MG PHY gating for HDMI ports tooImre Deak
The MG PHY clock gating needs to be configured for Type C static/fixed/legacy HDMI ports the same way it's configured for Type C static/fixed/legacy and aternate mode DP ports, fix this. Bspec: 4232, 21735 Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Tested-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102192656.4472-2-imre.deak@intel.com
2018-11-05drm/vgem: create a render node for vgemEmil Velikov
VGEM doesn't do anything modeset specific, so in a way exposing a primary node is 'wrong'. At the same time, we extensively use if for creating dumb buffers, fences, prime fd <> handle imports/exports. To the point that we explicitly annotate the vgem fence ioctls as DRM_RENDER_ALLOW and have an IGT test which opens the render node. close(drm_open_driver_render(DRIVER_VGEM)) Better late than never, let's flip the switch. Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181026120647.7528-1-emil.l.velikov@gmail.com
2018-11-05drm: sun4i: add support for H6 TCON TOPIcenowy Zheng
The TCON TOP on Allwinner H6 SoC is a cut down version of the R40 TCON TOP, which dropped TCON_TV1 and DSI (which do not exist on H6). Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-27-jernej.skrabec@siol.net
2018-11-05drm: sun4i: add quirks for TCON TOPIcenowy Zheng
Some SoCs, such as H6, doesn't have a full-featured TCON TOP. Add quirks support for TCON TOP. Currently the presence of TCON_TV1 and DSI is controlled via the quirks structure. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> [Fixed code style and removed unnecessary initialization] Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-25-jernej.skrabec@siol.net
2018-11-05drm/sun4i: Initialize registers in tcon-top driverJernej Skrabec
It turns out that TCON TOP registers in H6 SoC have non-zero reset value. This may cause issues if bits are not changed during configuration. To prevent that, initialize registers to 0. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-24-jernej.skrabec@siol.net
2018-11-05drm/sun4i: Add support for H6 HDMI PHYJernej Skrabec
H6 has Synopsys DWC HDMI 2.0 TX PHY. There is no freely available documentation for it, only code found in BSP kernel. However, judging by the code, PHY is very similar to older Synopsys HDMI PHY described in i.MX6 documentation. Most registers seem to be the same. According to i.MX6 documentation, mpll settings are based on pixel clock and are not specific to each SoC. Because of that, mpll table in this commit is based on that documentation and not on BSP code. Other PHY settings were derived from BSP PHY driver code. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-23-jernej.skrabec@siol.net
2018-11-05drm/sun4i: Add support for Synopsys HDMI PHYJernej Skrabec
Currently sun8i-hdmi-phy driver supports only custom PHYs connected to DW HDMI controller. Since newest Allwinner SoCs have unmodified Synopsys PHY, driver has to be reorganized to support them. Variant structure is expanded to allow differentiation between custom and Sysnopsys PHYs and to hold Synopsys PHY settings. Since DW HDMI bridge platform data has different fields for custom and Sysnopsys PHY, function sun8i_hdmi_phy_get_ops() is replaced with sun8i_hdmi_phy_set_ops(). Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-22-jernej.skrabec@siol.net
2018-11-05drm/sun4i: dw-hdmi-phy: Reorder quirks by familyJernej Skrabec
Currently, quirks and compatibles are sorted alphabetically. However, they should be sorted by family release date and then alphabetically. Fix that by moving A64 quirks and compatible to bottom. No functional change is made. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-21-jernej.skrabec@siol.net
2018-11-05drm/sun4i: Add support for H6 DW HDMI controllerJernej Skrabec
H6 has DW HDMI 2.0b controller v2.12a. It supports 4K at 60 Hz and HDCP 2.2. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-20-jernej.skrabec@siol.net
2018-11-05drm/sun4i: dw-hdmi: Add quirk for setting TMDS clockJernej Skrabec
It turns out that H6 HDMI BSP kernel driver doesn't change TMDS rate at all. At this point it is not clear whether it is just not necessary or it would cause some kind of issues. Add a quirk for it. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-18-jernej.skrabec@siol.net
2018-11-05drm/sun4i: dw-hdmi: Make mode_valid function configurableJernej Skrabec
Since it is not possible to access sun8i-dw-hdmi driver private data inside mode_valid function, make it configurable. That way different versions of HDMI controllers can set different function, depending on it's limitations. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-17-jernej.skrabec@siol.net
2018-11-05drm/sun4i: Not all DW HDMI controllers has scrambled addressesJernej Skrabec
Currently supported Allwinner SoCs with DW HDMI controller have scrambled addresses and read lock. However, that is not true in general. For example, A80 and H6 have normal addresses and normal read access. Move code for unscrambling addresses and unlocking read access to it's own function and call it from init function. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-16-jernej.skrabec@siol.net
2018-11-05drm/bridge/synopsys: dw-hdmi: Enable workaround for v2.12aJernej Skrabec
It turns out that even new DW HDMI controllers exhibits same magenta line issues as older versions. Enable workaround for v2.12a. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-15-jernej.skrabec@siol.net
2018-11-05drm/sun4i: Add support for H6 DE3 mixer 0Jernej Skrabec
Mixer 0 has 1 VI and 3 UI planes, scaler on all planes and can output 4K image @60Hz. It also support 10 bit colors, which are not yet implemented. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-14-jernej.skrabec@siol.net
2018-11-05drm/sun4i: Add basic support for DE3Jernej Skrabec
Display Engine 3 is an upgrade of DE2 with new features like support for 10 bit color formats and support for AFBC. Most of DE2 code works with DE3, except some small details. Implement basic support for DE3. Support for 10 bit colort formats and AFBC, among others missing features, will be added later. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/260238/
2018-11-05drm/sun4i: Disable unused DE2 sub-enginesJernej Skrabec
Some sub-engines are unused. Disable them explicitly. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-12-jernej.skrabec@siol.net
2018-11-05drm/sun4i: Fix DE2 mixer sizeJernej Skrabec
DE2 mixer is always 0x6000 bytes in size on all known SoCs. While at it, introduce a macro for that. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-11-jernej.skrabec@siol.net
2018-11-05drm/sun4i: Rework DE2 register definesJernej Skrabec
Most, if not all, registers found in DE2 still exists in DE3. However, units are on different base addresses. To prepare for addition of DE3 support, registers macros are reworked so they take base address as parameter. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> [rebased] Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-10-jernej.skrabec@siol.net
2018-11-05drm/exynos/fbdev: do not skip fbdev init if there are no connectorsAndrzej Hajda
Since connectors can be created dynamically, fbdev should be initialized even if there are no connectors at the moment. Otherwise fbdev will not be created even after connector's appearance. The patch fixes lack of fbdev on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-11-05drm/exynos/dsi: register connector if it is created after drm bindAndrzej Hajda
DSI device can be attached after DRM device is registered. In such case newly created connector must be registered by exynos_dsi. The patch fixes exynos_drm on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-11-05Revert "drm/exynos/decon5433: implement frame counter"Inki Dae
This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b This patch makes it to need get_vblank_counter callback in crtc to get frame counter from decon driver. However, drm_dev->max_vblank_count is a member unique to vendor's DRM driver but in case of ARM DRM, some CRTC devices don't provide the frame counter value. As a result, this patch made extension and clone mode not working. Instead of this patch, we may need separated max_vblank_count which belongs to each CRTC device, or need to implement frame counter emulation for them who don't support HW frame counter. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-11-05drm/exynos: checking for NULL instead of IS_ERR()Dan Carpenter
The of_drm_find_panel() function returns error pointers and never NULL but we the driver assumes that ->panel is NULL when it's not present. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-11-02i915/dp/fec: Cache the FEC_CAPABLE DPCD registerAnusha Srivatsa
Similar to DSC DPCD registers, let us cache FEC_CAPABLE register to avoid using stale values. With this we can avoid aux reads everytime and instead read the cached values. v2: Avoid using memset and array for a single field. (Manasi,Jani) v3: Print FEC CAPABILITY value. (Manasi) Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102041455.15818-1-anusha.srivatsa@intel.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-28 05:41:29 +0000