summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2024-04-25drm/bridge: imx: Fix unmet depenency for PHY_FSL_SAMSUNG_HDMI_PHYAdam Ford
When enabling i.MX8MP DWC HDMI driver, it automatically selects PHY_FSL_SAMSUNG_HDMI_PHY, since it wont' work without the phy. This may cause some Kconfig warnings during various build tests. Fix this by implying the phy instead of selecting the phy. To prevent this from happening with the DRM_IMX8MP_HDMI_PVI, also imply it instead of selecting it. Fixes: 1f36d634670d ("drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404190103.lLm8LtuP-lkp@intel.com/ Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240422103352.8886-1-aford173@gmail.com
2024-04-25drm/{i915, xe}: Implement fbdev emulation as in-kernel clientThomas Zimmermann
Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to intel_fbdev_setup() after i915 has registered its DRM device. Just like similar code in other drivers, i915 fbdev emulation now acts like a regular DRM client. Do the same for xe. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_client_dev_unregister() releases all in-kernel clients automatically. No further action is required within i915. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. Do the same for xe and remove its call to intel_fbdev_fini(). v8: - setup client in intel_display_driver_register (Jouni) - mention xe in commit message v7: - update xe driver - reword commit message v6: - use 'i915' for i915 device (Jouni) - remove unnecessary code for non-atomic mode setting (Jouni, Ville) - fix function name in commit message (Jouni) v3: - as before, silently ignore devices without displays v2: - let drm_client_register() handle initial hotplug - fix driver name in error message (Jani) - fix non-fbdev build (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-7-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/{i915,xe}: Implement fbdev client callbacksThomas Zimmermann
Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Fox xe, remove xe_display_last_close(), which restored the fbdev display. As with i915, the DRM core's drm_lastclose() performs this operation automatically. v8: - mention xe in commit message v7: - update xe driver v6: - return errors from client callbacks (Jouni) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-6-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/{i915,xe}: Unregister in-kernel clientsThomas Zimmermann
Unregister all in-kernel clients before unloading the i915 driver. For other drivers, drm_dev_unregister() does this automatically. As i915 and xe do not use this helper, they have to perform the call by themselves. Note that there are currently no in-kernel clients in i915 or xe. The patch prepares the drivers for a related update of their fbdev support. v8: - unregister clients in intel_display_driver_unregister() (Jani) - mention xe in commit message (Rodrigo, Jani) v7: - update xe driver Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-5-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/i915: Initialize fbdev DRM client with callback functionsThomas Zimmermann
Initialize i915's fbdev client by giving an instance of struct drm_client_funcs to drm_client_init(). Also clean up with drm_client_release(). Doing this in i915 prevents fbdev helpers from initializing and releasing the client internally (see drm_fb_helper_init()). No functional change yet; the client callbacks will be filled later. v6: - rename client to "intel-fbdev" (Jouni) v2: - call drm_fb_helper_unprepare() in error handling (Jani) - fix typo in commit message (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-4-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/i915: Move fbdev functionsThomas Zimmermann
Move functions within intel_fbdev.c to simplify later updates. Minor style fixes to make checkpatch happy, but no functional changes. v5: - style fixes (checkpatch) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-3-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/client: Export drm_client_dev_unregister()Thomas Zimmermann
Export drm_client_dev_unregister() for use by the i915 driver. The driver does not use drm_dev_unregister(), so it has to clean up the in-kernel DRM clients by itself. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-2-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/i915: pass dev_priv to _MMIO_PIPE2, _MMIO_TRANS2, _MMIO_CURSOR2Jani Nikula
Pass the dev_priv parameter to the low-level helpers, and move the implicit dev_priv usage one level higher. sed -i "s/\(_MMIO_PIPE2(\|_MMIO_TRANS2(\|_MMIO_CURSOR2(\)/\1dev_priv, /" \ $(git ls-files drivers/gpu/drm/i915) Name the parameter "display", as the generics allow it to be display already. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3a865664898586ff6cb8e74eab3d1f36eafc0557.1713890614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/i915: convert _MMIO_PIPE3()/_MMIO_PORT3() to accept baseJani Nikula
Most users of _MMIO_PIPE3() and _MMIO_PORT3() need to add the MMIO base to the registers. Convert the macros to _MMIO_BASE_PIPE3() and _MMIO_BASE_PORT3() to move the base addition until after the register selection. If the register address depends on DISPLAY_MMIO_BASE(), this removes the need to figure the base out for each register, and it only needs to be added once. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4b95f125f5021abc00b5fc661b2728f1b583c01e.1713890614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25gpu: drm: exynos: hdmi: eliminate uses of of_node_put()Shivani Gupta
Utilize the __free() cleanup handler within the hdmi_get_phy_io function to automatically release the device node when it is out of scope. This eliminates the manual invocation of of_node_put(), reducing the potential for memory leaks. The modification requires initializing the device node at the beginning of the function, ensuring that the automatic cleanup is safely executed. Consequently, this removes the need for error cleanup paths that utilize goto statements and the jump to out is no longer necessary. Suggested-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Shivani Gupta <shivani07g@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: mixer: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: hdmi: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: vidi: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: scaler: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: rotator: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: mic: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: gsc: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: g2d: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: dsi: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: fimd: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-25drm/exynos: fimc: drop driver owner initializationKrzysztof Kozlowski
Core in platform_driver_register() already sets the .owner, so driver does not need to. Whatever is set here will be anyway overwritten by main driver calling platform_driver_register(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2024-04-24drm/i915: Fix gt reset with GuC submission is disabledNirmoy Das
Currently intel_gt_reset() kills the GuC and then resets requested engines. This is problematic because there is a dedicated CSB FIFO which only GuC can access and if that FIFO fills up, the hardware will block on the next context switch until there is space that means the system is effectively hung. If an engine is reset whilst actively executing a context, a CSB entry will be sent to say that the context has gone idle. Thus if reset happens on a very busy system then killing GuC before killing the engines will lead to deadlock because of filled up CSB FIFO. To address this issue, the GuC should be killed only after resetting the requested engines and before calling intel_gt_init_hw(). v2: Improve commit message(John) Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422201951.633-2-nirmoy.das@intel.com
2024-04-24drm/i915: Refactor confusing __intel_gt_reset()Nirmoy Das
__intel_gt_reset() is really for resetting engines though the name might suggest something else. So add a helper function to remove confusions with no functional changes. v2: Move intel_gt_reset_all_engines() next to intel_gt_reset_engine() to make diff simple(John) Cc: John Harrison <john.c.harrison@intel.com> Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422201951.633-1-nirmoy.das@intel.com
2024-04-24drm/xe/guc: Fix arguments passed to relay G2H handlersMichal Wajdeczko
By default CT code was passing just payload of the G2H event message, while Relay code expects full G2H message including HXG header which contains DATA0 field. Fix that. Fixes: 26d4481ac23f ("drm/xe/guc: Start handling GuC Relay event messages") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240419150351.358-1-michal.wajdeczko@intel.com (cherry picked from commit 48c64d495fbef343c59598a793d583dfd199d389) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-24drm/xe: call free_gsc_pkt only once on action add failureHimal Prasad Ghimiray
The drmm_add_action_or_reset function automatically invokes the action (free_gsc_pkt) in the event of a failure; therefore, there's no necessity to call it within the return check. -v2 Fix commit message. (Lucas) Fixes: d8b1571312b7 ("drm/xe/huc: HuC authentication via GSC") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-4-himal.prasad.ghimiray@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 22bf0bc04d273ca002a47de55693797b13076602) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-24drm/xe: Remove sysfs only once on action add failureHimal Prasad Ghimiray
The drmm_add_action_or_reset function automatically invokes the action (sysfs removal) in the event of a failure; therefore, there's no necessity to call it within the return check. Modify the return type of xe_gt_ccs_mode_sysfs_init to int, allowing the caller to pass errors up the call chain. Should sysfs creation or drmm_add_action_or_reset fail, error propagation will prompt a driver load abort. -v2 Edit commit message (Nikula/Lucas) use err_force_wake label instead of new. (Lucas) Avoid unnecessary warn/error messages. (Lucas) Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode") Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240412181211.1155732-3-himal.prasad.ghimiray@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit a99641e38704202ae2a97202b3d249208c9cda7f) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2024-04-24drm: xlnx: zynqmp_dpsub: Set input live formatAnatoliy Klymenko
Program live video input format according to selected media bus format. In the bridge mode of operation, DPSUB is connected to FPGA CRTC which almost certainly supports a single media bus format as its output. Expect this to be delivered via the new bridge atomic state. Program DPSUB registers accordingly. Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-6-c7f379b7168e@amd.com
2024-04-24drm: xlnx: zynqmp_dpsub: Minimize usage of global flagAnatoliy Klymenko
Avoid usage of global zynqmp_dpsub.dma_enabled flag in DPSUB layer context. This flag signals whether the driver runs in DRM CRTC or DRM bridge mode, assuming that all display layers share the same live or non-live mode of operation. Using per-layer mode instead of global flag will simplify future support of the hybrid scenario. Remove redundant checks in DMA request/release contexts as zynqmp_disp_layer.info is well-defined for all layer types, including the correct number of DMA channels required for each particular layer. Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-5-c7f379b7168e@amd.com
2024-04-24drm: xlnx: zynqmp_dpsub: Anounce supported input formatsAnatoliy Klymenko
DPSUB in bridge mode supports multiple input media bus formats. Announce the list of supported input media bus formats via drm_bridge.atomic_get_input_bus_fmts callback. Introduce a set of live input formats supported by DPSUB. Add safeguards to format list functions to prevent their misuse in the different layer modes contexts. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-4-c7f379b7168e@amd.com
2024-04-24drm: xlnx: zynqmp_dpsub: Add connected live layer helperAnatoliy Klymenko
Add a helper function capturing the first connected live display layer discovery logic. Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-3-c7f379b7168e@amd.com
2024-04-24drm: xlnx: zynqmp_dpsub: Update live format definesAnatoliy Klymenko
Update live format defines to match DPSUB AV_BUF_LIVE_VID_CONFIG register layout. These defines were never referenced before, so no other changes required. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-2-c7f379b7168e@amd.com
2024-04-24drm: xlnx: zynqmp_dpsub: Set layer mode during creationAnatoliy Klymenko
Set layer mode of operation (live or dma-based) during layer creation. Each DPSUB layer mode of operation is defined by corresponding DT node port connection, so it is possible to assign it during layer object creation. Previously it was set in layer enable functions, although it is too late as setting layer format depends on layer mode, and should be done before given layer enabled. Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkainen@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240416-dp-live-fmt-v4-1-c7f379b7168e@amd.com
2024-04-24drm/bridge: tc358764: drop driver owner assignmentKrzysztof Kozlowski
Core in mipi_dsi_driver_register() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240330202741.83867-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-24drm/bridge: chipone-icn6211: drop driver owner assignmentKrzysztof Kozlowski
Core in mipi_dsi_driver_register() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240330202741.83867-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-24drm/panel: jdi-fhd-r63452: make use of prepare_prev_firstBarnabás Czémán
The DSI host must be enabled for the panel to be initialized in prepare(). Set the prepare_prev_first flag to guarantee this. Signed-off-by: Barnabás Czémán <trabarni@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240423-jdi-fix-v1-1-808970662b40@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240423-jdi-fix-v1-1-808970662b40@gmail.com
2024-04-24drm/bridge: adv7511: make it honour next bridge in DTDmitry Baryshkov
DT bindings for adv7511 and adv7533 bridges specify HDMI output to be present at the port@1. This allows board DT to add e.g. HDMI connector nodes or any other next chained bridge. Make adv7511 driver discover that bridge and attach it to the chain. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240331-adv7511-next-bridge-v2-1-7356d61dc7b2@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240331-adv7511-next-bridge-v2-1-7356d61dc7b2@linaro.org
2024-04-24drm/panel: visionox-rm69299: stop calling regulator_set_load manuallyDmitry Baryshkov
Use .init_load_uA part of the bulk regulator API instead of calling register_set_load() manually. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240404-drop-panel-unregister-v1-6-9f56953c5fb9@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-6-9f56953c5fb9@linaro.org
2024-04-24drm/panel: novatek-nt36672a: stop calling regulator_set_load manuallyDmitry Baryshkov
Use .init_load_uA part of the bulk regulator API instead of calling register_set_load() manually. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240404-drop-panel-unregister-v1-5-9f56953c5fb9@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-5-9f56953c5fb9@linaro.org
2024-04-24drm/panel: novatek-nt36672e: stop calling regulator_set_load manuallyDmitry Baryshkov
Use .init_load_uA part of the bulk regulator API instead of calling register_set_load() manually. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com> Link: https://lore.kernel.org/r/20240404-drop-panel-unregister-v1-4-9f56953c5fb9@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-4-9f56953c5fb9@linaro.org
2024-04-24drm/panel: novatek-nt36672e: stop setting register load before disableDmitry Baryshkov
It is pointless to set register load before disabling the register. This vote is going to be dropped as soon as the register is disabled. Drop these register_set_load calls. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240404-drop-panel-unregister-v1-3-9f56953c5fb9@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-3-9f56953c5fb9@linaro.org
2024-04-23drm/amdgpu/mes: fix use-after-free issueJack Xiao
Delete fence fallback timer to fix the ramdom use-after-free issue. v2: move to amdgpu_mes.c Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-23drm/amdgpu/sdma5.2: use legacy HDP flush for SDMA2/3Alex Deucher
This avoids a potential conflict with firmwares with the newer HDP flush mechanism. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-23drm/amdgpu: Fix the ring buffer size for queue VM flushPrike Liang
Here are the corrections needed for the queue ring buffer size calculation for the following cases: - Remove the KIQ VM flush ring usage. - Add the invalidate TLBs packet for gfx10 and gfx11 queue. - There's no VM flush and PFP sync, so remove the gfx9 real ring and compute ring buffer usage. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-23drm/amdkfd: Add VRAM accounting for SVM migrationMukul Joshi
Do VRAM accounting when doing migrations to vram to make sure there is enough available VRAM and migrating to VRAM doesn't evict other possible non-unified memory BOs. If migrating to VRAM fails, driver can fall back to using system memory seamlessly. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-23drm/amd/pm: Restore config space after resetLijo Lazar
During mode-2 reset, pci config space registers are affected at device side. However, certain platforms have switches which assign virtual BAR addresses and returns the same even after device is reset. This affects pci_restore_state() as it doesn't issue another config write, if the value read is same as the saved value. Add a workaround to write saved config space values from driver side. Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence restrict the workaround only to those. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-23drm/amdgpu/umsch: don't execute umsch test when GPU is in reset/suspendLang Yu
umsch test needs full GPU functionality(e.g., VM update, TLB flush, possibly buffer moving under memory pressure) which may be not ready under these states. Just skip it to avoid potential issues. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-23drm/amdkfd: Fix rescheduling of restore workerFelix Kuehling
Handle the case that the restore worker was already scheduled by another eviction while the restore was in progress. Fixes: 9a1c1339abf9 ("drm/amdkfd: Run restore_workers on freezable WQs") Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Tested-by: Yunxiang Li <Yunxiang.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-23drm/amdgpu: Update BO eviction prioritiesFelix Kuehling
Make SVM BOs more likely to get evicted than other BOs. These BOs opportunistically use available VRAM, but can fall back relatively seamlessly to system memory. It also avoids SVM migrations evicting other, more important BOs as they will evict other SVM allocations first. Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Acked-by: Mukul Joshi <mukul.joshi@amd.com> Tested-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-23drm/amdgpu/vpe: fix vpe dpm setup failedPeyton Lee
The vpe dpm settings should be done before firmware is loaded. Otherwise, the frequency cannot be successfully raised. Signed-off-by: Peyton Lee <peytolee@amd.com> Reviewed-by: Lang Yu <lang.yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-23drm/amdgpu: Assign correct bits for SDMA HDP flushLijo Lazar
HDP Flush request bit can be kept unique per AID, and doesn't need to be unique SOC-wide. Assign only bits 10-13 for SDMA v4.4.2. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-09-07 22:53:15 +0000