| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- HID-BPF infrastructure: this allows to start using HID-BPF. Note that
the mechanism to ship HID-BPF program through the kernel tree is
still not implemented yet (but is planned).
This should be a no-op for 99% of users. Also we are gaining
kselftests for the HID tree (Benjamin Tissoires)
- Some UAF fixes in workers when using uhid (Pietro Borrello & Benjamin
Tissoires)
- Constify hid_ll_driver (Thomas Weißschuh)
- Allow more custom IIO sensors through HID (Philipp Jungkamp)
- Logitech HID++ fixes for scroll wheel, protocol and debug (Bastien
Nocera)
- Some new device support: Steam Deck (Vicki Pfau), UClogic (José
Expósito), Logitech G923 Xbox Edition steering wheel (Walt Holman),
EVision keyboards (Philippe Valembois)
- other assorted code cleanups and fixes
* tag 'for-linus-2023022201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (99 commits)
HID: mcp-2221: prevent UAF in delayed work
hid: bigben_probe(): validate report count
HID: asus: use spinlock to safely schedule workers
HID: asus: use spinlock to protect concurrent accesses
HID: bigben: use spinlock to safely schedule workers
HID: bigben_worker() remove unneeded check on report_field
HID: bigben: use spinlock to protect concurrent accesses
HID: logitech-hidpp: Add myself to authors
HID: logitech-hidpp: Retry commands when device is busy
HID: logitech-hidpp: Add more debug statements
HID: Add support for Logitech G923 Xbox Edition steering wheel
HID: logitech-hidpp: Add Signature M650
HID: logitech-hidpp: Remove HIDPP_QUIRK_NO_HIDINPUT quirk
HID: logitech-hidpp: Don't restart communication if not necessary
HID: logitech-hidpp: Add constants for HID++ 2.0 error codes
Revert "HID: logitech-hidpp: add a module parameter to keep firmware gestures"
HID: logitech-hidpp: Hard-code HID++ 1.0 fast scroll support
HID: i2c-hid: goodix: Add mainboard-vddio-supply
dt-bindings: HID: i2c-hid: goodix: Add mainboard-vddio-supply
HID: i2c-hid: goodix: Stop tying the reset line to the regulator
...
|
|
Given that our initial BPF program is not using any kfuncs anymore,
we can reorder the initialization to first try to load it and then
register the kfuncs. This has the advantage of not exporting kfuncs
when HID-BPF is not working.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
We don't need to watch for calls on bpf_prog_put_deferred(), so remove
that from the entrypoints.bpf.c file.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Previously, HID-BPF was relying on a bpf tracing program to be notified
when a program was released from userspace. This is error prone, as
LLVM sometimes inline the function and sometimes not.
So instead of messing up with the bpf prog ref count, we can use the
bpf_link concept which actually matches exactly what we want:
- a bpf_link represents the fact that a given program is attached to a
given HID device
- as long as the bpf_link has fd opened (either by the userspace program
still being around or by pinning the bpf object in the bpffs), the
program stays attached to the HID device
- once every user has closed the fd, we get called by
hid_bpf_link_release() that we no longer have any users, and we can
disconnect the program to the device in 2 passes: first atomically clear
the bit saying that the link is active, and then calling release_work in
a scheduled work item.
This solves entirely the problems of BPF tracing not showing up and is
definitely cleaner.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
As mentioned in the link below, having JIT and BPF is not enough to
have fentry/fexit/fmod_ret APIs. This resolves the error that
happens on a system without tracing enabled when hid-bpf tries to
load itself.
Link: https://lore.kernel.org/r/CABRcYmKyRchQhabi1Vd9RcMQFCcb=EtWyEbFDFRTc-L-U8WhgA@mail.gmail.com
Fixes: f5c27da4e3c8 ("HID: initial BPF implementation")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Florent Revest <revest@chromium.org>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Link: https://lore.kernel.org/r/20221206145936.922196-4-benjamin.tissoires@redhat.com
|
|
Now that we have aproper non debug API to declare which function is
fmodret, we can rely on it.
Link: https://lore.kernel.org/all/20221121104403.1545f9b5@gandalf.local.home/
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221206145936.922196-3-benjamin.tissoires@redhat.com
|
|
Add a new tracepoint hid_bpf_rdesc_fixup() so we can trigger a
report descriptor fixup in the bpf world.
Whenever the program gets attached/detached, the device is reconnected
meaning that userspace will see it disappearing and reappearing with
the new report descriptor.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This function can not be called under IRQ, thus it is only available
while in SEC("syscall").
For consistency, this function requires a HID-BPF context to work with,
and so we also provide a helper to create one based on the HID unique
ID.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
--
changes in v12:
- variable dereferenced before check 'ctx'
|Reported-by: kernel test robot <lkp@intel.com>
|Reported-by: Dan Carpenter <error27@gmail.com>
no changes in v11
no changes in v10
changes in v9:
- fixed kfunc declaration aaccording to latest upstream changes
no changes in v8
changes in v7:
- hid_bpf_allocate_context: remove unused variable
- ensures buf is not NULL
changes in v6:
- rename parameter size into buf__sz to teach the verifier about
the actual buffer size used by the call
- remove the allocated data in the user created context, it's not used
new-ish in v5
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
We need to also be able to change the size of the report.
Reducing it is easy, because we already have the incoming buffer that is
big enough, but extending it is harder.
Pre-allocate a buffer that is big enough to handle all reports of the
device, and use that as the primary buffer for BPF programs.
To be able to change the size of the buffer, we change the device_event
API and request it to return the size of the buffer.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Kind of a hack, but works for now:
Instead of listening for any close of eBPF program, we now
decrement the refcount when we insert it in our internal
map of fd progs.
This is safe to do because:
- we listen to any call of destructor of programs
- when a program is being destroyed, we disable it by removing
it from any RCU list used by any HID device (so it will never
be called)
- we then trigger a job to cleanup the prog fd map, but we overwrite
the removal of the elements to not do anything on the programs, just
remove the allocated space
This is better than previously because we can remove the map of known
programs and their usage count. We now rely on the refcount of
bpf, which has greater chances of being accurate.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Declare an entry point that can use fmod_ret BPF programs, and
also an API to access and change the incoming data.
A simpler implementation would consist in just calling
hid_bpf_device_event() for any incoming event and let users deal
with the fact that they will be called for any event of any device.
The goal of HID-BPF is to partially replace drivers, so this situation
can be problematic because we might have programs which will step on
each other toes.
For that, we add a new API hid_bpf_attach_prog() that can be called
from a syscall and we manually deal with a jump table in hid-bpf.
Whenever we add a program to the jump table (in other words, when we
attach a program to a HID device), we keep the number of time we added
this program in the jump table so we can release it whenever there are
no other users.
HID devices have an RCU protected list of available programs in the
jump table, and those programs are called one after the other thanks
to bpf_tail_call().
To achieve the detection of users losing their fds on the programs we
attached, we add 2 tracing facilities on bpf_prog_release() (for when
a fd is closed) and bpf_free_inode() (for when a pinned program gets
unpinned).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
