summaryrefslogtreecommitdiff
path: root/drivers/hid/hid-ids.h
AgeCommit message (Collapse)Author
2023-06-27Merge branch 'for-6.5/nvidia' into for-linusJiri Kosina
- support for nVidia Thunderstrike (SHIELD 2017) controller (Rahul Rameshbabu)
2023-06-27Merge branch 'for-6.5/acer' into for-linusJiri Kosina
- ASUS ROG Z13 keyboard support and other assorted fixes to hid-asus (Luke D. Jones)
2023-06-09HID: add quirk for 03f0:464a HP Elite Presenter MouseMarco Morandini
HP Elite Presenter Mouse HID Record Descriptor shows two mouses (Repord ID 0x1 and 0x2), one keypad (Report ID 0x5), two Consumer Controls (Report IDs 0x6 and 0x3). Previous to this commit it registers one mouse, one keypad and one Consumer Control, and it was usable only as a digitl laser pointer (one of the two mouses). This patch defines the 464a USB device ID and enables the HID_QUIRK_MULTI_INPUT quirk for it, allowing to use the device both as a mouse and a digital laser pointer. Signed-off-by: Marco Morandini <marco.morandini@polimi.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-06-09HID: nvidia-shield: Initial driver implementation with Thunderstrike supportRahul Rameshbabu
Supports the Thunderstrike (SHIELD 2017) controller. Implements support for the Thunderstrike HOSTCMD firmware interface. Adds sysfs attributes about a SHIELD device and introduces haptics support for controllers. Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-06-08HID: microsoft: Add rumble support to latest xbox controllersSiarhei Vishniakou
Currently, rumble is only supported via bluetooth on a single xbox controller, called 'model 1708'. On the back of the device, it's named 'wireless controller for xbox one'. However, in 2021, Microsoft released a firmware update for this controller. As part of this update, the HID descriptor of the device changed. The product ID was also changed from 0x02fd to 0x0b20. On this controller, rumble was supported via hid-microsoft, which matched against the old product id (0x02fd). As a result, the firmware update broke rumble support on this controller. See: https://news.xbox.com/en-us/2021/09/08/xbox-controller-firmware-update-rolling-out-to-insiders-starting-today/ The hid-microsoft driver actually supports rumble on the new firmware, as well. So simply adding new product id is sufficient to bring back this support. After discussing further with the xbox team, it was pointed out that another xbox controller, xbox elite series 2, can be supported in a similar way. Add rumble support for all of these devices in this patch. Two of the devices have received firmware updates that caused their product id's to change. Both old and new firmware versions of these devices were tested. The tested controllers are: 1. 'wireless controller for xbox one', model 1708 2. 'xbox wireless controller', model 1914. This is also sometimes referred to as 'xbox series S|X'. 3. 'elite series 2', model 1797. The tested configurations are: 1. model 1708, pid 0x02fd (old firmware) 2. model 1708, pid 0x0b20 (new firmware) 3. model 1914, pid 0x0b13 4. model 1797, pid 0x0b05 (old firmware) 5. model 1797, pid 0x0b22 (new firmware) I verified rumble support on both bluetooth and usb. Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Siarhei Vishniakou <svv@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-05-23HID: asus: Add support for ASUS ROG Z13 keyboardLuke D. Jones
Add support for the ROG Z13 keyboard. This is a variant of the last few ASUS ROG keyboards and has much of the same functionality. Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-05-23HID: google: add jewel USB idSung-Chi Li
Add 1 additional hammer-like device. Signed-off-by: Sung-Chi Li <lschyi@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-04-26Merge branch 'for-6.4/kye' into for-linusJiri Kosina
- generic support for all Kye tablets (David Yang)
2023-04-26Merge branch 'for-6.4/core' into for-linusJiri Kosina
- improve handling of generic "Digitizer" usage (Jason Gerecke) - support for KEY_CAMERA_FOCUS (Feng Qi)
2023-04-13HID: Ignore battery for ELAN touchscreen on ROG Flow X13 GV301RAweiliang1503
Ignore the reported battery level of the built-in touchscreen to suppress battery warnings when a stylus is used. The device ID was added and the battery ignore quirk was enabled. Signed-off-by: weiliang1503 <weiliang1503@gmail.com> Link: https://lore.kernel.org/r/20230330115638.16146-1-weiliang1503@gmail.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-03-24HID: kye: Add support for all kye tabletsDavid Yang
Physical data for all kye tablets are collected from Windows driver, to generate correct HID reports. Signed-off-by: David Yang <mmyangfl@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10HID: topre: Add support for 87 keys Realforce R2Alessandro Manca
The tenkeyless version of the Realforce R2 has the same issue of the full size one, the report fixup is needed to make n-key rollover work instead of 6 key rollover Signed-off-by: Alessandro Manca <crizan.git@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10HID: add HP 13t-aw100 & 14t-ea100 digitizer battery quirksPhilippe Troin
Similar to many other devices using the Synopsys Designware Elantech hardware, HP Spectre x360 13t-aw100 and 14t-ea100 report an empty battery devices, supposedly for the active stylus. Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore the battery reports from these devices. Note that there are multiple versions of the panel installed in the 14t-ea100. Signed-off-by: Philippe Troin <phil@fifi.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-03-10HID: kye: Sort kye devicesDavid Yang
Sort kye devices by their Produce IDs. Signed-off-by: David Yang <mmyangfl@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-02-22Merge branch 'for-6.3/uclogic' into for-linusBenjamin Tissoires
UClogic assorted fixes and new devices support (José Expósito)
2023-02-22Merge branch 'for-6.3/steam' into for-linusBenjamin Tissoires
Add Steam Deck support (Vicki Pfau)
2023-02-22Merge branch 'for-6.3/logitech' into for-linusBenjamin Tissoires
- HID++ fixes for scroll wheel, protocol and debug (Bastien Nocera) - add support of Logitech G923 Xbox Edition steering wheel (Walt Holman)
2023-02-22Merge branch 'for-6.3/evision' into for-linusBenjamin Tissoires
New hid-evision driver for EVision keyboards (Philippe Valembois)
2023-02-10HID: Add support for Logitech G923 Xbox Edition steering wheelWalt Holman
We get the same level of features as the regular G920. Signed-off-by: Walt Holman <waltholman09@gmail.com> Link: https://lore.kernel.org/r/20230207195051.16373-1-waltholman09@gmail.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-02-06HID: evision: Add preliminary support for EVision keyboardsPhilippe Valembois
For now only supports one model and only filters out bogus reports sent when the keyboard has been configured through hidraw. Without this, as events are not released, soft repeat floods userspace with unknown key events. Signed-off-by: Philippe Valembois <lephilousophe@gmail.com> Link: https://lore.kernel.org/r/20230125211511.12266-1-lephilousophe@gmail.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-02-06HID: Ignore battery for ELAN touchscreen 29DF on HPLuka Guzenko
The touchscreen reports a battery status of 0% and jumps to 1% when a stylus is used. The device ID was added and the battery ignore quirk was enabled for it. Signed-off-by: Luka Guzenko <l.guzenko@web.de> Link: https://lore.kernel.org/r/20230120223741.3007-1-l.guzenko@web.de Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-02-06HID: hid-steam: Add Steam Deck supportVicki Pfau
Add preliminary support for the Steam Deck's controller interface. Currently, this only supports the controller inputs and toggling lizard mode (Valve's name for a hardware kb/m emulation mode). It does not support any of the advanced features, such as the motion sensors or force-feedback. The Steam Deck also includes a heartbeat for lizard mode that switches it back on if no reports have been received within a few milliseconds. The official Steam client handles this by sending a handful of configuration reports every few ms, so we copy this behavior by sending configuration reports to disable the mouse and reset the digital mappings every 5ms. As this isn't needed for the older Steam Controller, this is only done on the Steam Deck. Signed-off-by: Vicki Pfau <vi@endrift.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20230126030126.895670-2-vi@endrift.com Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2023-01-25HID: Ignore battery for Elan touchscreen on Asus TP420IAmarco.rodolfi@tuta.io
This device has a touchscreen thats report a battery even if it doesn't have one. Ask Linux to ignore the battery so it will not always report it as low. [jkosina@suse.cz: fix whitespace damage] Signed-off-by: Marco Rodolfi <marco.rodolfi@tuta.io> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-20HID: elecom: add support for TrackBall 056E:011CTakahiro Fujii
Make function buttons on ELECOM M-HT1DRBK trackball mouse work. This model has two devices with different device IDs (010D and 011C). Both of them misreports the number of buttons as 5 in the report descriptor, even though they have 8 buttons. hid-elecom overwrites the report to fix them, but supports only on 010D and does not work on 011C. This patch fixes 011C in the similar way but with specialized position parameters. In fact, it is sufficient to rewrite only 17th byte (05 -> 08). However I followed the existing way. Signed-off-by: Takahiro Fujii <fujii@xaxxi.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-18HID: uclogic: Add support for XP-PEN Deco Pro MWJosé Expósito
The XP-PEN Deco Pro MW is a UGEE v2 device with a frame with 8 buttons, a bitmap dial and a mouse. Its pen has 2 buttons, supports tilt and pressure. It can be connected using a USB cable or, to use it in wireless mode, using a USB Bluetooth dongle. When it is connected in wireless mode the device battery is used to power it. All the pieces to support it are already in place. Add its ID and quirks in order to support the device. Link: https://github.com/DIGImend/digimend-kernel-drivers/issues/622 Tested-by: Andreas Grosse <andig.mail@t-online.de> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-18HID: uclogic: Add support for XP-PEN Deco Pro SWJosé Expósito
The XP-PEN Deco Pro SW is a UGEE v2 device with a frame with 8 buttons, a bitmap dial and a mouse; however, the UCLOGIC_MOUSE_FRAME_QUIRK is required because it reports an incorrect frame type. Its pen has 2 buttons, supports tilt and pressure. It can be connected using a USB cable or, to use it in wireless mode, using a USB Bluetooth dongle. When it is connected in wireless mode the device battery is used to power it. All the pieces to support it are already in place. Add its ID and quirks in order to support the device. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-18HID: uclogic: Add support for XP-PEN Deco 01 V2José Expósito
The XP-PEN Deco 01 V2 is a UGEE v2 device with a frame with 8 buttons. Its pen has 2 buttons, supports tilt and pressure. Add its ID in order to support the device. Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/839 Tested-by: Mark Waddoups <mwaddoups@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2023-01-17HID: revert CHERRY_MOUSE_000C quirkJiri Kosina
This partially reverts commit f6d910a89a2391 ("HID: usbhid: Add ALWAYS_POLL quirk for some mice"), as it turns out to break reboot on some platforms for reason yet to be understood. Fixes: f6d910a89a2391 ("HID: usbhid: Add ALWAYS_POLL quirk for some mice") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-12-20HID: plantronics: Additional PIDs for double volume key presses quirkTerry Junge
I no longer work for Plantronics (aka Poly, aka HP) and do not have access to the headsets in order to test. However, as noted by Maxim, the other 32xx models that share the same base code set as the 3220 would need the same quirk. This patch adds the PIDs for the rest of the Blackwire 32XX product family that require the quirk. Plantronics Blackwire 3210 Series (047f:c055) Plantronics Blackwire 3215 Series (047f:c057) Plantronics Blackwire 3225 Series (047f:c058) Quote from previous patch by Maxim Mikityanskiy Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice for each volume key press. This patch adds a quirk to hid-plantronics for this product ID, which will ignore the second volume key press if it happens within 5 ms from the last one that was handled. The patch was tested on the mentioned model only, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected, because the rate is about 3 times per second, which is far less frequent than once in 5 ms. End quote Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-12-20HID: Ignore HP Envy x360 eu0009nv stylus batteryJosé Expósito
Battery status is reported for the HP Envy x360 eu0009nv stylus even though it does not have battery. Prevent it from always reporting the battery as low (1%). Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/823 Reported-by: Ioannis Iliopoulos <jxftw2424@gmail.com> Tested-by: Ioannis Iliopoulos <jxftw2424@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-11-22HID: usbhid: Add ALWAYS_POLL quirk for some miceAnkit Patel
Some additional USB mouse devices are needing ALWAYS_POLL quirk without which they disconnect and reconnect every 60s. Add below devices to the known quirk list. CHERRY VID 0x046a, PID 0x000c MICROSOFT VID 0x045e, PID 0x0783 PRIMAX VID 0x0461, PID 0x4e2a Signed-off-by: Ankit Patel <anpatel@nvidia.com> Signed-off-by: Haotien Hsu <haotienh@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-11-14HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10Hans de Goede
The Acer Aspire Switch V 10 (SW5-017)'s keyboard-dock uses the same ITE controller setup as other Acer Switch 2-in-1's. This needs special handling for the wifi on/off toggle hotkey as well as to properly report touchpad on/off keypresses. Add the USB-ids for the SW5-017's keyboard-dock with a quirk setting of QUIRK_TOUCHPAD_ON_OFF_REPORT to fix both issues. Cc: Rudolf Polzer <rpolzer@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-10-18HID: saitek: add madcatz variant of MMO7 mouse device IDSamuel Bailey
The MadCatz variant of the MMO7 mouse has the ID 0738:1713 and the same quirks as the Saitek variant. Signed-off-by: Samuel Bailey <samuel.bailey1@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-10-14HID: playstation: add initial DualSense Edge controller supportRoderick Colenbrander
Provide initial support for the DualSense Edge controller. The brings support up to the level of the original DualSense, but won't yet provide support for new features (e.g. reprogrammable buttons). Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> CC: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20221010212313.78275-3-roderick.colenbrander@sony.com
2022-10-05Merge branch 'for-6.1/uclogic' into for-linusBenjamin Tissoires
- Add UGEEv2 support (XP-PEN Deco Pro S and Parblo A610 PRO) (José Expósito)
2022-10-05Merge branch 'for-6.1/rc-controllers' into for-linusBenjamin Tissoires
- Support for various RC controllers (Marcus Folkesson)
2022-09-20hid: topre: Add driver fixing report descriptorHarry Stern
The Topre REALFORCE R2 firmware incorrectly reports that interface descriptor number 1, input report descriptor 2's events are array events rather than variable events. That particular report descriptor is used to report keypresses when there are more than 6 keys held at a time. This bug prevents events from this interface from being registered properly, so only 6 keypresses (from a different interface) can be registered at once, rather than full n-key rollover. This commit fixes the bug by setting the correct value in a report_fixup function. The original bug report can be found here: Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/804 Thanks to Benjamin Tissoires for diagnosing the issue with the report descriptor. Signed-off-by: Harry Stern <harry@harrystern.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220911003614.297613-1-harry@harrystern.net
2022-09-20HID: Add driver for PhoenixRC Flight ControllerMarcus Folkesson
The PhoenixRC is a controller with 8 channels for use in flight simulators. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20220914184345.270456-1-marcus.folkesson@gmail.com
2022-08-25HID: Add Apple Touchbar on T2 Macs in hid_have_special_driver listAditya Garg
The touchbar on Apple T2 Macs has 2 modes, one that shows the function keys and other that shows the media controls. The user can use the fn key on his keyboard to switch between the 2 modes. On Linux, if people were using an external keyboard or mouse, the touchbar failed to change modes on pressing the fn key with the following in dmesg :- [ 10.661445] apple-ib-als 0003:05AC:8262.0001: : USB HID v1.01 Device [Apple Inc. Ambient Light Sensor] on usb-bce-vhci-3/input0 [ 11.830992] apple-ib-touchbar 0003:05AC:8302.0007: input: USB HID v1.01 Keyboard [Apple Inc. Touch Bar Display] on usb-bce-vhci-6/input0 [ 12.139407] apple-ib-touchbar 0003:05AC:8102.0008: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input0 [ 12.211824] apple-ib-touchbar 0003:05AC:8102.0009: : USB HID v1.01 Device [Apple Inc. Touch Bar Backlight] on usb-bce-vhci-7/input1 [ 14.219759] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110) [ 24.395670] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110) [ 34.635791] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 2 (-110) [ 269.579233] apple-ib-touchbar 0003:05AC:8302.0007: tb: Failed to set touch bar mode to 1 (-110) Add the USB IDs of the touchbar found in T2 Macs to HID have special driver list to fix the issue. Signed-off-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-08-25HID: add Lenovo Yoga C630 battery quirkSteev Klimaszewski
Similar to the Surface Go devices, the Elantech touchscreen/digitizer in the Lenovo Yoga C630 mistakenly reports the battery of the stylus, and always reports an empty battery. Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore this battery and prevent the erroneous low battery warnings. Signed-off-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-08-25HID: uclogic: Add support for Parblo A610 PROJosé Expósito
The Parblo A610 PRO is a UGEE v2 device with a frame with 9 buttons and a bitmap dial. Its pen has 2 buttons, supports tilt and pressure. Add its ID in order to support the device. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-08-25HID: uclogic: Add support for XP-PEN Deco Pro SJosé Expósito
The XP-PEN Deco Pro S is a UGEE v2 device with a frame with 8 buttons, a bitmap dial and a mouse. Its pen has 2 buttons, supports tilt and pressure. All the pieces to support it are already in place. Add its ID in order to support the device. The required Wireshark traces were captured by Jouke Witteveen. For more information check [1]. Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/738 [1] Tested-by: Jouke Witteveen <j.witteveen@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-08-02Merge branch 'for-5.20/uclogic' into for-linusJiri Kosina
- XP-PEN Deco L support (José Expósito)
2022-06-15HID: uclogic: Add support for XP-PEN Deco LJosé Expósito
The XP-PEN Deco L (UGEE) needs to be initialized by sending a buffer of magic data, discovered by sniffing the Windows driver traffic. In order to differentiate UGEE tablets that need this kind of initialization from the previous ones, name them v2 internally and create an entry point for them. After initialization, the template report descriptors can be discovered by parsing a string descriptor, similar to the one exposed by HUION v1 devices. Add all the required elements to support the device. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-06-08HID: hid-input: add Surface Go battery quirkMaximilian Luz
Similar to the Surface Go (1), the (Elantech) touchscreen/digitizer in the Surface Go 2 mistakenly reports the battery of the stylus. Instead of over the touchscreen device, battery information is provided via bluetooth and the touchscreen device reports an empty battery. Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore this battery and prevent the erroneous low battery warnings. Cc: stable@vger.kernel.org Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-05-24Merge branch 'for-5.19/uclogic' into for-linusJiri Kosina
- support for wider variety of Huion tablets ported from DIGImend project (José Expósito, Nikolai Kondrashov)
2022-05-24Merge branch 'for-5.19/megaworld' into for-linusJiri Kosina
2022-05-24Merge branch 'for-5.19/lenovo' into for-linusJiri Kosina
2022-05-11HID: uclogic: Add pen support for XP-PEN Star 06Roman Romanenko
Similar to other UGEE pens, but the IDs were missing. Signed-off-by: Roman Romanenko <romu4444@gmail.com> Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-05-06HID: Add support for Mega World controller force feedbackfrank zago
This patch adds support for one of the several Mega World USB game controller with integrated force feedback. It is a HID based memory-less game controller, with a weak motor on the left, and a strong one on the right. Signed-off-by: frank zago <frank@zago.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-28 22:35:15 +0000