summaryrefslogtreecommitdiff
path: root/drivers/hwtracing/stm
AgeCommit message (Collapse)Author
2023-02-23Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
2023-02-09mm: replace vma->vm_flags direct modifications with modifier callsSuren Baghdasaryan
Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-02drivers/hwtracing/stm: Remove "select SRCU"Paul E. McKenney
Now that the SRCU Kconfig option is unconditionally selected, there is no longer any point in selecting it. Therefore, remove the "select SRCU" Kconfig statements. Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: <linux-stm32@st-md-mailman.stormreply.com> Cc: <linux-arm-kernel@lists.infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: John Ogness <john.ogness@linutronix.de>
2021-04-16stm class: Use correct UUID APIsAndy Shevchenko
It appears that the STM code didn't manage to accurately decypher the delicate inner workings of an alternative thought process behind the UUID API and directly called generate_random_uuid() that clearly needs to be a static function in lib/uuid.c. At the same time, said STM code is poking directly at the byte array inside the uuid_t when it uses the UUID for its internal purposes. Fix these two transgressions by using intended APIs instead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [ash: changed back to uuid_t and updated the commit message] Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210415091555.88085-1-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-16stm class: Remove an unused functionJiapeng Chong
Fix the following clang warning: drivers/hwtracing/stm/policy.c:60:21: warning: unused function 'stp_policy_node_name' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210414171251.14672-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21stm class: Fix module init return on allocation failureWang Hui
In stm_heartbeat_init(): return value gets reset after the first iteration by stm_source_register_device(), so allocation failures after that will, after a clean up, return success. Fix that. Fixes: 119291853038 ("stm class: Add heartbeat stm source device") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hui <john.wanghui@huawei.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210115195917.3184-2-alexander.shishkin@linux.intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05stm class: ftrace: Use different channel accroding to CPUTingwei Zhang
To avoid mixup of packets from differnt ftrace packets simultaneously, use different channel for packets from different CPU. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-7-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05stm class: ftrace: Enable supported trace export flagTingwei Zhang
Set flags for trace_export. Export function trace, event trace and trace marker to stm. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-6-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05stm class: ftrace: Change dependency to TRACINGTingwei Zhang
We will support copying event trace to STM. Change STM_SOURCE_FTRACE to depend on TRACING since we will support multiple tracers. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20201005071319.78508-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-15stm class: Replace zero-length array with flexible-arrayGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-03-18stm class: sys-t: Fix the use of time_after()Alexander Shishkin
The operands of time_after() are in a wrong order in both instances in the sys-t driver. Fix that. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 39f10239df75 ("stm class: p_sys-t: Add support for CLOCKSYNC packets") Fixes: d69d5e83110f ("stm class: Add MIPI SyS-T protocol support") Cc: stable@vger.kernel.org # v4.20+ Link: https://lore.kernel.org/r/20200317062215.15598-3-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-14stm class: Lose the protocol driver when dropping its referenceAlexander Shishkin
Commit c7fd62bc69d02 ("stm class: Introduce framing protocol drivers") forgot to tear down the link between an stm device and its protocol driver when policy is removed. This leads to an invalid pointer reference if one tries to write to an stm device after the policy has been removed and the protocol driver module unloaded, leading to the below splat: > BUG: unable to handle page fault for address: ffffffffc0737068 > #PF: supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 3d780f067 P4D 3d780f067 PUD 3d7811067 PMD 492781067 PTE 0 > Oops: 0000 [#1] SMP NOPTI > CPU: 1 PID: 26122 Comm: cat Not tainted 5.4.0-rc5+ #1 > RIP: 0010:stm_output_free+0x40/0xc0 [stm_core] > Call Trace: > stm_char_release+0x3e/0x70 [stm_core] > __fput+0xc6/0x260 > ____fput+0xe/0x10 > task_work_run+0x9d/0xc0 > exit_to_usermode_loop+0x103/0x110 > do_syscall_64+0x19d/0x1e0 > entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by tearing down the link from an stm device to its protocol driver when the policy involving that driver is removed. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: c7fd62bc69d02 ("stm class: Introduce framing protocol drivers") Reported-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Ammy Yi <ammy.yi@intel.com> CC: stable@vger.kernel.org # v4.20+ Link: https://lore.kernel.org/r/20191114064201.43089-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-23compat_ioctl: move drivers to compat_ptr_ioctlArnd Bergmann
Each of these drivers has a copy of the same trivial helper function to convert the pointer argument and then call the native ioctl handler. We now have a generic implementation of that, so use it. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-17Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-08-28stm class: Fix a double free of stm_source_deviceDing Xiang
In the error path of stm_source_register_device(), the kfree is unnecessary, as the put_device() before it ends up calling stm_source_device_release() to free stm_source_device, leading to a double free at the outer kfree() call. Remove it. Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d4093c2fa ("stm class: Introduce an abstraction for System Trace Module devices") Link: https://lore.kernel.org/linux-arm-kernel/1563354988-23826-1-git-send-email-dingxiang@cmss.chinamobile.com/ Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20190821074955.3925-2-alexander.shishkin@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30drivers: Introduce device lookup variants by nameSuzuki K Poulose
Add a helper to match the device name for device lookup. Also reuse this generic exported helper for the existing bus_find_device_by_name(). and add similar variants for driver/class. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Murphy <dmurphy@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-leds@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wpan@vger.kernel.org Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Stefan Schmidt <stefan@datenfreihafen.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20190723221838.12024-2-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25stm class: Fix channel bitmap on 32-bit systemsAlexander Shishkin
Commit 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices") naively calculates the channel bitmap size in 64-bit chunks regardless of the size of underlying unsigned long, making the bitmap half as big on a 32-bit system. This leads to an out of bounds access with the upper half of the bitmap. Fix this by using BITS_TO_LONGS. While at it, convert to using struct_size() for the total size calculation of the master struct. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices") Reported-by: Mulu He <muluhe@codeaurora.org> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25stm class: Fix channel free in stm output free pathTingwei Zhang
Number of free masters is not set correctly in stm free path. Fix this by properly adding the number of output channels before setting them to 0 in stm_output_disclaim(). Currently it is equivalent to doing nothing since master->nr_free is incremented by 0. Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices") Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Cc: stable@vger.kernel.org # v4.4 Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21stm class: Prevent division by zeroAlexander Shishkin
Using STP_POLICY_ID_SET ioctl command with dummy_stm device, or any STM device that supplies zero mmio channel size, will trigger a division by zero bug in the kernel. Prevent this by disallowing channel widths other than 1 for such devices. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices") CC: stable@vger.kernel.org # v4.4+
2019-02-21stm class: Fix an endless loop in channel allocationZhi Jin
There is a bug in the channel allocation logic that leads to an endless loop when looking for a contiguous range of channels in a range with a mixture of free and occupied channels. For example, opening three consequtive channels, closing the first two and requesting 4 channels in a row will trigger this soft lockup. The bug is that the search loop forgets to skip over the range once it detects that one channel in that range is occupied. Restore the original intent to the logic by fixing the omission. Signed-off-by: Zhi Jin <zhi.jin@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices") CC: stable@vger.kernel.org # v4.4+
2018-12-19stm class: Fix a module refcount leak in policy creation error pathAlexander Shishkin
Commit c7fd62bc69d0 ("stm class: Introduce framing protocol drivers") adds a bug into the error path of policy creation, that would do a module_put() on a wrong module, if one tried to create a policy for an stm device which already has a policy, using a different protocol. IOW, | mkdir /config/stp-policy/dummy_stm.0:p_basic.test | mkdir /config/stp-policy/dummy_stm.0:p_sys-t.test # puts "p_basic" | mkdir /config/stp-policy/dummy_stm.0:p_sys-t.test # "p_basic" -> -1 throws: | general protection fault: 0000 [#1] SMP PTI | CPU: 3 PID: 2887 Comm: mkdir | RIP: 0010:module_put.part.31+0xe/0x90 | Call Trace: | module_put+0x13/0x20 | stm_put_protocol+0x11/0x20 [stm_core] | stp_policy_make+0xf1/0x210 [stm_core] | ? __kmalloc+0x183/0x220 | ? configfs_mkdir+0x10d/0x4c0 | configfs_mkdir+0x169/0x4c0 | vfs_mkdir+0x108/0x1c0 | do_mkdirat+0xe8/0x110 | __x64_sys_mkdir+0x1b/0x20 | do_syscall_64+0x5a/0x140 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Correct this sad mistake by calling calling 'put' on the correct reference, which happens to match another error path in the same function, so we consolidate the two at the same time. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: c7fd62bc69d0 ("stm class: Introduce framing protocol drivers") Reported-by: Ammy Yi <ammy.yi@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Use memcat_p()Alexander Shishkin
Instead of a local copy, use the memcat_p() helper to merge policy node attributes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: heartbeat: Fix whitespaceAlexander Shishkin
Fix whitespace in the code for better readability, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: p_sys-t: Add support for CLOCKSYNC packetsAlexander Shishkin
This adds support for CLOCKSYNC SyS-T packets, that establish correlation between the transport clock (STP timestamps) and SyS-T timestamps. These packets are sent periodically to allow the decoder to keep both time sources in sync. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Add MIPI SyS-T protocol supportAlexander Shishkin
This adds support for MIPI SyS-T protocol as specified in an open standard [1]. In addition to marking message boundaries, it also supports tagging messages with the source UUID, to provide better distinction between trace sources, including payload length and timestamp in the message's metadata. This driver adds attributes to STP policy nodes to control/configure these metadata features. [1] https://www.mipi.org/specifications/sys-t Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Switch over to the protocol driverAlexander Shishkin
Now that the default framing protocol is factored out into its own driver, switch over to using the driver for writing data. To that end, make the policy code require a valid protocol name (or absence thereof, which is equivalent to "p_basic"). Also, to make transition easier, make stm class request "p_basic" module at initialization time. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Factor out default framing protocolAlexander Shishkin
The STP framing pattern that the stm class implicitly applies to the data payload is, in fact, a protocol. This patch moves the relevant code out of the stm core into its own driver module. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Add a helper for writing data packetsAlexander Shishkin
Add a helper to write a sequence of bytes as STP data packets. This is used by protocol drivers to output their metadata, as well as the actual data payload. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Introduce framing protocol driversAlexander Shishkin
At the moment, the stm class applies a certain STP framing pattern to the data as it is written to the underlying STM device. In order to allow different framing patterns (aka protocols), this patch introduces the concept of STP protocol drivers, defines data structures and APIs for the protocol drivers to use. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Clean up stp_configfs_initAlexander Shishkin
Minor code shortening, no functional changes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Clarify configfs root type/operations namesAlexander Shishkin
The current naming of stp-policy root type and group ops is confusing, rename them for better readability. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11stm class: Rework policy node fallbackAlexander Shishkin
Currently, if no matching policy node can be found for a trace source, we'll try to use "default" policy node, then, if that doesn't exist, we'll pick the first node, in order of creation. If that also fails, we'll allocate M/C range from the beginning of the device's M/C range. This makes it difficult to know which node (if any) was used in any particular case. In order to make things more deterministic, the new order is as follows: * if they supply ID string, use that and nothing else, * if they are a task, use their task name (comm), * use "default", if it exists, * return failure, to let them know there is no suitable rule. This should provide enough convenience with the "default" catch-all node, while not leaving *everything* to chance. As a side effect, this relaxes the requirement of using ioctl() for identification with the possibility of using task names as policy nodes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-05Merge tag 'char-misc-4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the "big" char and misc driver patches for 4.18-rc1. It's not a lot of stuff here, but there are some highlights: - coreboot driver updates - soundwire driver updates - android binder updates - fpga big sync, mostly documentation - lots of minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits) vmw_balloon: fixing double free when batching mode is off MAINTAINERS: Add driver-api/fpga path fpga: clarify that unregister functions also free documentation: fpga: move fpga-region.txt to driver-api documentation: fpga: add bridge document to driver-api documentation: fpga: move fpga-mgr.txt to driver-api Documentation: fpga: move fpga overview to driver-api fpga: region: kernel-doc fixes fpga: bridge: kernel-doc fixes fpga: mgr: kernel-doc fixes fpga: use SPDX fpga: region: change api, add fpga_region_create/free fpga: bridge: change api, don't use drvdata fpga: manager: change api, don't use drvdata fpga: region: don't use drvdata in common fpga code Drivers: hv: vmbus: Removed an unnecessary cast from void * ver_linux: Drop redundant calls to system() to test if file is readable ver_linux: Move stderr redirection from function parameter to function body misc: IBM Virtual Management Channel Driver (VMC) rpmsg: Correct support for MODULE_DEVICE_TABLE() ...
2018-05-26hwtracing: stm: fix build error on some archesGreg Kroah-Hartman
Commit b5e2ced9bf81 ("stm class: Use vmalloc for the master map") caused a build error on some arches as vmalloc.h was not explicitly included. Fix that by adding it to the list of includes. Fixes: b5e2ced9bf81 ("stm class: Use vmalloc for the master map") Reported-by: kbuild test robot <lkp@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25stm class: Use vmalloc for the master mapAlexander Shishkin
Fengguang is running into a warning from the buddy allocator: > swapper/0: page allocation failure: order:9, mode:0x14040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null) > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.17.0-rc1 #262 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 > Call Trace: ... > __kmalloc+0x14b/0x180: ____cache_alloc at mm/slab.c:3127 > stm_register_device+0xf3/0x5c0: stm_register_device at drivers/hwtracing/stm/core.c:695 ... Which is basically a result of the stm class trying to allocate ~512kB for the dummy_stm with its default parameters. There's no reason, however, for it not to be vmalloc()ed instead, which is what this patch does. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> CC: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14coresight: Moving framework and drivers to SPDX identifierMathieu Poirier
Moving all kernel side CoreSight framework and drivers to SPDX identifier. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-28stm class: Make dummy's master/channel ranges configurableAlexander Shishkin
To allow for more flexible testing of the stm class, make it possible to specify the ranges of masters and channels that the dummy_stm devices cover. This is done via module parameters. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2018-03-28stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplateAlexander Shishkin
This adds SPDX GPL-2.0 header to to stm core files and removes the GPLv2 boilerplate text. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2017-12-04tracing: Pass export pointer as argument to ->write()Felipe Balbi
By passing an export descriptor to the write function, users don't need to keep a global static pointer and can rely on container_of() to fetch their own structure. Link: http://lkml.kernel.org/r/20170602102025.5140-1-felipe.balbi@linux.intel.com Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-11-14Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs updates from Christoph Hellwig: "A couple of configfs cleanups: - proper use of the bool type (Thomas Meyer) - constification of struct config_item_type (Bhumika Goyal)" * tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs: RDMA/cma: make config_item_type const stm class: make config_item_type const ACPI: configfs: make config_item_type const nvmet: make config_item_type const usb: gadget: configfs: make config_item_type const PCI: endpoint: make config_item_type const iio: make function argument and some structures const usb: gadget: make config_item_type structures const dlm: make config_item_type const netconsole: make config_item_type const nullb: make config_item_type const ocfs2/cluster: make config_item_type const target: make config_item_type const configfs: make ci_type field, some pointers and function arguments const configfs: make config_item_type const configfs: Fix bool initialization/comparison
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19stm class: make config_item_type constBhumika Goyal
Make config_item_type structures const as they are either passed to a function having the argument as const or used inside a if statement or stored in the const "ci_type" field of a config_item structure. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-09-22stm class: Fix a use-after-freeAlexander Shishkin
For reasons unknown, the stm_source removal path uses device_destroy() to kill the underlying device object. Because device_destroy() uses devt to look for the device to destroy and the fact that stm_source devices don't have one (or all have the same one), it just picks the first device in the class, which may well be the wrong one. That is, loading stm_console and stm_heartbeat and then removing both will die in dereferencing a freed object. Since this should have been device_unregister() in the first place, use it instead of device_destroy(). Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 7bd1d4093c2 ("stm class: Introduce an abstraction for System Trace Module devices") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-25stm: Potential read overflow in stm_char_policy_set_ioctl()Dan Carpenter
The "size" variable comes from the user so we need to verify that it's large enough to hold an stp_policy_id struct. Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-12-15Merge tag 'trace-v4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "This release has a few updates: - STM can hook into the function tracer - Function filtering now supports more advance glob matching - Ftrace selftests updates and added tests - Softirq tag in traces now show only softirqs - ARM nop added to non traced locations at compile time - New trace_marker_raw file that allows for binary input - Optimizations to the ring buffer - Removal of kmap in trace_marker - Wakeup and irqsoff tracers now adhere to the set_graph_notrace file - Other various fixes and clean ups" * tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits) selftests: ftrace: Shift down default message verbosity kprobes/trace: Fix kprobe selftest for newer gcc tracing/kprobes: Add a helper method to return number of probe hits tracing/rb: Init the CPU mask on allocation tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too fgraph: Handle a case where a tracer ignores set_graph_notrace tracing: Replace kmap with copy_from_user() in trace_marker writing ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it tracing: Allow benchmark to be enabled at early_initcall() tracing: Have system enable return error if one of the events fail tracing: Do not start benchmark on boot up tracing: Have the reg function allow to fail ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline ring-buffer: Froce rb_update_write_stamp() to be inlined ring-buffer: Force inline of hotpath helper functions tracing: Make __buffer_unlock_commit() always_inline tracing: Make tracepoint_printk a static_key ring-buffer: Always inline rb_event_data() ring-buffer: Make rb_reserve_next_event() always inlined ...
2016-11-22stm: Mark the functions of writing STM with notraceChunyan Zhang
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be writen to sink via STM, all functions that related to writing data packets to STM should be marked 'notrace' to avoid being traced by Ftrace, otherwise the program would stall into an endless loop. Link: http://lkml.kernel.org/r/1479715043-6534-7-git-send-email-zhang.chunyan@linaro.org Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-22stm dummy: Mark dummy_stm_packet() with notraceChunyan Zhang
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be writen to sink via STM, all functions that related to writing data packets to STM should be marked 'notrace' to avoid being traced by Ftrace, otherwise the program would stall into an endless loop. Link: http://lkml.kernel.org/r/1479715043-6534-6-git-send-email-zhang.chunyan@linaro.org Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-22stm class: ftrace: Add ftrace-export-over-stm driverChunyan Zhang
This patch adds a driver that models itself as an stm_source called stm_ftrace. Once the stm device and stm_ftrace have been linked via sysfs, the driver registers itself as a trace_export and everything passed to the interface from Ftrace subsystem will end up in the STM trace engine. Link: http://lkml.kernel.org/r/1479715043-6534-3-git-send-email-zhang.chunyan@linaro.org Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>