| Age | Commit message (Collapse) | Author |
|---|
|
If TMC ETR is enabled without being ready, in later use we may
see AXI bus errors caused by accessing invalid addresses.
Signed-off-by: Yabin Cui <yabinc@google.com>
[ Tweak error message ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230127231001.1920947-1-yabinc@google.com
|
|
devm_ioremap_resource() never returns NULL pointer, it
will return ERR_PTR() when it fails, so replace the check
with IS_ERR().
Fixes: 5b7916625c01 ("Coresight: Add TPDA link driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[ Fix return value to the PTR_ERR(base) ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230129084246.537694-1-yangyingliang@huawei.com
|
|
The devnode() callback in struct device_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Alistar Popple <alistair@popple.id.au>
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jilin Yuan <yuanjilin@cdjrlc.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Won Chung <wonchung@google.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
'remove' callbacks get called whenever a device is unbound from
the driver, which can get triggered from user space.
Putting it into the __exit section means that the function gets
dropped in for built-in drivers, as pointed out by this build
warning:
`tpda_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tpda.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tpda.o
`tpdm_remove' referenced in section `.data' of drivers/hwtracing/coresight/coresight-tpdm.o: defined in discarded section `.exit.text' of drivers/hwtracing/coresight/coresight-tpdm.o
Fixes: 5b7916625c01 ("Coresight: Add TPDA link driver")
Fixes: b3c71626a933 ("Coresight: Add coresight TPDM source driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230126163530.3495413-1-arnd@kernel.org
|
|
With the dynamic traceid allocation scheme in, we output the
AUX_OUTPUT_HWID packet every time event->start() is called.
This could cause too many such records in the perf.data,
while only one per CPU throughout the life time of
the event is required. Make sure we only output it once.
Before this patch:
$ perf report -D | grep OUTPUT_HW_ID
...
AUX_OUTPUT_HW_ID events: 55 (18.3%)
After this patch:
$ perf report -D | grep OUTPUT_HW_ID
...
AUX_OUTPUT_HW_ID events: 5 ( 1.9%)
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20230120103434.864318-1-suzuki.poulose@arm.com
|
|
Kernel test robot reports:
drivers/hwtracing/coresight/coresight-core.c:1176:7: warning: variable
'hash' is used uninitialized whenever switch case is taken
[-Wsometimes-uninitialized]
case CORESIGHT_DEV_SUBTYPE_SOURCE_PROC:
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/hwtracing/coresight/coresight-core.c:1195:24: note: uninitialized
use occurs here
idr_remove(&path_idr, hash);
^~~~
Fix this by moving the usage of the hash variable to where it actually
should have been.
Cc: Mao Jinlong <quic_jinlmao@quicinc.com>
Link: https://lkml.kernel.org/r/202301211339.9mU0dccO-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/r/20230123164700.1074064-1-suzuki.poulose@arm.com
|
|
TPDA(Trace, Profiling and Diagnostics Aggregator) is
to provide packetization, funneling and timestamping of
TPDM data. Multiple monitors are connected to different
input ports of TPDA.This change is to add tpda
enable/disable/probe functions for coresight tpda driver.
- - - - - - - - - - - -
| TPDM 0| | TPDM 1 | | TPDM 2|
- - - - - - - - - - - -
| | |
|_ _ _ _ _ _ | _ _ _ _ |
| | |
| | |
------------------
| TPDA |
------------------
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230120095301.30792-2-quic_jinlmao@quicinc.com
|
|
Integration test for tpdm can help to generate the data for
verification of the topology during TPDM software bring up.
Sample:
echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
cat /dev/tmc_etf0 > /data/etf-tpdm0.bin
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-6-quic_jinlmao@quicinc.com
|
|
TPDM serves as data collection component for various dataset types.
DSB(Discrete Single Bit) is one of the dataset types. DSB subunit
can be enabled for data collection by writing 1 to the first bit of
DSB_CR register. This change is to add enable/disable function for
DSB dataset by writing DSB_CR register.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-5-quic_jinlmao@quicinc.com
|
|
Add driver to support Coresight device TPDM (Trace, Profiling and
Diagnostics Monitor). TPDM is a monitor to collect data from
different datasets. This change is to add probe/enable/disable
functions for tpdm source.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230120095301.30792-1-quic_jinlmao@quicinc.com
|
|
Except stm, there could be other sources which are not associated
with cpus. Use IDR to store and search these sources' paths.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230117145708.16739-2-quic_jinlmao@quicinc.com
|
|
Adds in a number of pr_debug macros to allow the debugging and test of
the trace ID allocation system.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-15-mike.leach@linaro.org
|
|
Use the perf_report_aux_output_id() call to output the CoreSight trace ID
and associated CPU as a PERF_RECORD_AUX_OUTPUT_HW_ID record in the
perf.data file.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-14-mike.leach@linaro.org
|
|
CoreSight sources provide a callback (.trace_id) in the standard source
ops which returns the ID to the core code. This was used to check that
sources all had a unique Trace ID.
Uniqueness is now gauranteed by the Trace ID allocation system, and the
check code has been removed from the core.
This patch removes the unneeded and unused .trace_id source ops
from the ops structure and implementations in etm3x, etm4x and stm.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-8-mike.leach@linaro.org
|
|
Use the TraceID API to allocate ETM trace IDs dynamically.
As with the etm4x we allocate on enable / disable for perf,
allocate on enable / reset for sysfs.
Additionally we allocate on sysfs file read as both perf and sysfs
can read the ID before enabling the hardware.
Remove sysfs option to write trace ID - which is inconsistent with
both the dynamic allocation method and the fixed allocation method
previously used.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-7-mike.leach@linaro.org
|
|
The trace ID API is now used to allocate trace IDs for ETM4.x / ETE
devices.
For perf sessions, these will be allocated on enable, and released on
disable.
For sysfs sessions, these will be allocated on enable, but only released
on reset. This allows the sysfs session to interrogate the Trace ID used
after the session is over - maintaining functional consistency with the
previous allocation scheme.
The trace ID will also be allocated on read of the mgmt/trctraceid file.
This ensures that if perf or sysfs read this before enabling trace, the
value will be the one used for the trace session.
Trace ID initialisation is removed from the _probe() function.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-6-mike.leach@linaro.org
|
|
Updates the STM driver to use the trace ID allocation API.
This uses the _system_id calls to allocate an ID on device poll,
and release on device remove.
The sysfs access to the STMTRACEIDR register has been changed from RW
to RO. Having this value as writable is not appropriate for the new
Trace ID scheme - and had potential to cause errors in the previous
scheme if values clashed with other sources.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-5-mike.leach@linaro.org
|
|
Adds in calls to allocate and release Trace ID for the CPUs in use
by the perf session.
Adds in notifier calls to the trace ID allocator that perf
events are starting and stopping.
This ensures that Trace IDs associated with CPUs remain the same
throughout the perf session, and are only released when all perf
sessions are complete.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-4-mike.leach@linaro.org
|
|
The checks for sources to have unique IDs has been removed - this is now
guaranteed by the ID allocation mechanisms, and inappropriate where
multiple ID maps are in use in larger systems
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-3-mike.leach@linaro.org
|
|
The existing mechanism to assign Trace ID values to sources is limited
and does not scale for larger multicore / multi trace source systems.
The API introduces functions that reserve IDs based on availabilty
represented by a coresight_trace_id_map structure. This records the
used and free IDs in a bitmap.
CPU bound sources such as ETMs use the coresight_trace_id_get_cpu_id
coresight_trace_id_put_cpu_id pair of functions. The API will record
the ID associated with the CPU. This ensures that the same ID will be
re-used while perf events are active on the CPU. The put_cpu_id function
will pend release of the ID until all perf cs_etm sessions are complete.
For backward compatibility the functions will attempt to use the same
CPU IDs as the legacy system would have used if these are still available.
Non-cpu sources, such as the STM can use coresight_trace_id_get_system_id /
coresight_trace_id_put_system_id.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
[ Fix checkpatch warning in drivers/hwtracing/coresight/coresight-trace-id.c ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-2-mike.leach@linaro.org
|
|
The PTT device can only support the devices on the same PCIe core,
within BDF range [lower_bdf, upper_bdf]. It's not correct to assume
the devices on the root bus are from the same PCIe core, there are
cases that root ports from different PCIe core are sharing the same
bus. So check when initializing the filters list.
Fixes: ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230112112201.16283-1-yangyicong@huawei.com
|
|
platform_get_resource() returns NULL pointer not PTR_ERR(), replace
the IS_ERR() check with NULL pointer check.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230118074920.1772141-1-yangyingliang@huawei.com
|
|
Add driver for UltraSoc SMB(System Memory Buffer) device.
SMB provides a way to buffer messages from ETM, and store
these "CPU instructions trace" in system memory.
The SMB device is identifier as ACPI HID "HISI03A1". Device
system memory address resources are allocated using the _CRS
method and buffer modes is the circular buffer mode.
SMB is developed by UltraSoc technology, which is acquired by
Siemens, and we still use "UltraSoc" to name driver.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Tested-by: JunHao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114101302.62320-2-hejunhao3@huawei.com
|
|
enable_req_count is only ever accessed inside the spinlock, so to avoid
confusion that there are concurrent accesses and simplify the code,
change it to an int.
One access outside of the spinlock is in enable_show() which appears to
allow partially written data to be displayed between enable_req_count,
powered and enabled so move this one inside the spin lock too.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-4-james.clark@arm.com
|
|
In commit 6746eae4bbad ("coresight: cti: Fix hang in cti_disable_hw()")
PM runtime calls are removed from cti_enable_hw/cti_disable_hw. When
enabling CTI by writing enable sysfs node, clock for accessing CTI
register won't be enabled. Device will crash due to register access
issue. Add PM runtime call in enable_store to fix this issue.
Fixes: 6746eae4bbad ("coresight: cti: Fix hang in cti_disable_hw()")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
[Change to only call pm_runtime_put if a disable happened]
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-3-james.clark@arm.com
|
|
Writing 0 to the enable control repeatedly results in a negative value
for enable_req_count. After this, writing 1 to the enable control
appears to not work until the count returns to positive.
Change it so that it's impossible for enable_req_count to be < 0.
Return an error to indicate that the disable request was invalid.
Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-2-james.clark@arm.com
|
|
The TRCSEQRSTEVR and TRCSEQSTR registers are not implemented if the
TRCIDR5.NUMSEQSTATE == 0. Skip accessing the registers in such cases.
Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114091632.60095-1-hejunhao3@huawei.com
|
|
Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221019124953.45885-1-yuanjilin@cdjrlc.com
|
|
When CTI is discovered first then the function
coresight_set_assoc_ectdev_mutex() is called to set the association
between CTI and ETM device. Recent lockdep fix passes a null pointer.
This patch passes the correct pointer.
Before patch: log of boot oops sequence with CTI discovered first:
[ 12.424091] cs_system_cfg: CoreSight Configuration manager initialised
[ 12.483474] coresight cti_sys0: CTI initialized
[ 12.488109] coresight cti_sys1: CTI initialized
[ 12.503594] coresight cti_cpu0: CTI initialized
[ 12.517877] coresight-cpu-debug 850000.debug: Coresight debug-CPU0 initialized
[ 12.523479] coresight-cpu-debug 852000.debug: Coresight debug-CPU1 initialized
[ 12.529926] coresight-cpu-debug 854000.debug: Coresight debug-CPU2 initialized
[ 12.541808] coresight stm0: STM32 initialized
[ 12.544421] coresight-cpu-debug 856000.debug: Coresight debug-CPU3 initialized
[ 12.585639] coresight cti_cpu1: CTI initialized
[ 12.614028] coresight cti_cpu2: CTI initialized
[ 12.631679] CSCFG registered etm0
[ 12.633920] coresight etm0: CPU0: etm v4.0 initialized
[ 12.656392] coresight cti_cpu3: CTI initialized
...
[ 12.708383] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000348
...
[ 12.755094] Internal error: Oops: 0000000096000044 [#1] SMP
[ 12.761817] Modules linked in: coresight_etm4x(+) coresight_tmc coresight_cpu_debug coresight_replicator coresight_funnel coresight_cti coresight_tpiu coresight_stm coresight
[ 12.767210] CPU: 3 PID: 1346 Comm: systemd-udevd Not tainted 6.1.0-rc3tid-v6tid-v6-235166-gf7f7d7a2204a-dirty #498
[ 12.782827] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[ 12.793154] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 12.800010] pc : coresight_set_assoc_ectdev_mutex+0x30/0x50 [coresight]
[ 12.806694] lr : coresight_set_assoc_ectdev_mutex+0x30/0x50 [coresight]
...
[ 12.885064] Call trace:
[ 12.892352] coresight_set_assoc_ectdev_mutex+0x30/0x50 [coresight]
[ 12.894693] cti_add_assoc_to_csdev+0x144/0x1b0 [coresight_cti]
[ 12.900943] coresight_register+0x2c8/0x320 [coresight]
[ 12.906844] etm4_add_coresight_dev.isra.27+0x148/0x280 [coresight_etm4x]
[ 12.912056] etm4_probe+0x144/0x1c0 [coresight_etm4x]
[ 12.918998] etm4_probe_amba+0x40/0x78 [coresight_etm4x]
[ 12.924032] amba_probe+0x11c/0x1f0
After patch: similar log
[ 12.444467] cs_system_cfg: CoreSight Configuration manager initialised
[ 12.456329] coresight-cpu-debug 850000.debug: Coresight debug-CPU0 initialized
[ 12.456754] coresight-cpu-debug 852000.debug: Coresight debug-CPU1 initialized
[ 12.469672] coresight-cpu-debug 854000.debug: Coresight debug-CPU2 initialized
[ 12.476098] coresight-cpu-debug 856000.debug: Coresight debug-CPU3 initialized
[ 12.532409] coresight stm0: STM32 initialized
[ 12.533708] coresight cti_sys0: CTI initialized
[ 12.539478] coresight cti_sys1: CTI initialized
[ 12.550106] coresight cti_cpu0: CTI initialized
[ 12.633931] coresight cti_cpu1: CTI initialized
[ 12.634664] coresight cti_cpu2: CTI initialized
[ 12.638090] coresight cti_cpu3: CTI initialized
[ 12.721136] CSCFG registered etm0
...
[ 12.762643] CSCFG registered etm1
[ 12.762666] coresight etm1: CPU1: etm v4.0 initialized
[ 12.776258] CSCFG registered etm2
[ 12.776282] coresight etm2: CPU2: etm v4.0 initialized
[ 12.784357] CSCFG registered etm3
[ 12.785455] coresight etm3: CPU3: etm v4.0 initialized
Error can also be triggered by manually starting the modules using modprobe
in the following order:
root@linaro-developer:/home/linaro/cs-mods# modprobe coresight
root@linaro-developer:/home/linaro/cs-mods# modprobe coresight-cti
root@linaro-developer:/home/linaro/cs-mods# modprobe coresight-etm4x
Tested on Dragonboard DB410c
Applies to coresight/next
Fixes: 23722fb46725 ("coresight: Fix possible deadlock with lock dependency")
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221123193818.6253-1-mike.leach@linaro.org
|
|
cpuhp_state_add_instance() and cpuhp_state_remove_instance() should
be used in pairs. Or there will lead to the warn on
cpuhp_remove_multi_state() since the cpuhp_step list is not empty.
The following is the error log with 'rmmod coresight-trbe':
Error: Removing state 215 which has instances left.
Call trace:
__cpuhp_remove_state_cpuslocked+0x144/0x160
__cpuhp_remove_state+0xac/0x100
arm_trbe_device_remove+0x2c/0x60 [coresight_trbe]
platform_remove+0x34/0x70
device_remove+0x54/0x90
device_release_driver_internal+0x1e4/0x250
driver_detach+0x5c/0xb0
bus_remove_driver+0x64/0xc0
driver_unregister+0x3c/0x70
platform_driver_unregister+0x20/0x30
arm_trbe_exit+0x1c/0x658 [coresight_trbe]
__arm64_sys_delete_module+0x1ac/0x24c
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x58/0x1a0
do_el0_svc+0x38/0xd0
el0_svc+0x2c/0xc0
el0t_64_sync_handler+0x1ac/0x1b0
el0t_64_sync+0x19c/0x1a0
---[ end trace 0000000000000000 ]---
Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221122090355.23533-1-shenyang39@huawei.com
|
|
etm4x devices cannot be successfully probed when their CPU is offline.
For example, when booting with maxcpus=n, ETM probing will fail on
CPUs >n, and the probing won't be reattempted once the CPUs come
online. This will leave those CPUs unable to make use of ETM.
This change adds a mechanism to delay the probing if the corresponding
CPU is offline, and to try it again when the CPU comes online.
Signed-off-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220705145935.24679-1-tamas.zsoldos@arm.com
|
|
cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.
Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:
perf record -e cs_etm//u -- ls
This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b28 ("coresight:
cti: Correct the parameter for pm_runtime_put")
With lock and scheduler debugging enabled the following is output:
coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
Call trace:
dump_backtrace+0x134/0x140
show_stack+0x20/0x58
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
__might_resched+0x180/0x228
__might_sleep+0x50/0x88
__pm_runtime_resume+0xac/0xb0
cti_enable+0x44/0x120
coresight_control_assoc_ectdev+0xc0/0x150
coresight_enable_path+0xb4/0x288
etm_event_start+0x138/0x170
etm_event_add+0x48/0x70
event_sched_in.isra.122+0xb4/0x280
merge_sched_in+0x1fc/0x3d0
visit_groups_merge.constprop.137+0x16c/0x4b0
ctx_sched_in+0x114/0x1f0
perf_event_sched_in+0x60/0x90
ctx_resched+0x68/0xb0
perf_event_exec+0x138/0x508
begin_new_exec+0x52c/0xd40
load_elf_binary+0x6b8/0x17d0
bprm_execve+0x360/0x7f8
do_execveat_common.isra.47+0x218/0x238
__arm64_sys_execve+0x48/0x60
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.4+0xfc/0x120
do_el0_svc+0x34/0xc0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.
Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Cc: stable <stable@kernel.org>
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
[ Fix build warnings ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221025131032.1149459-1-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 665c157e0204176023860b51a46528ba0ba62c33.
It causes reported build warnings:
drivers/hwtracing/coresight/coresight-cti-core.c: In functio
n 'cti_enable_hw':
drivers/hwtracing/coresight/coresight-cti-core.c:93:24: warning: unused variable 'dev' [-Wunused-variable]
93 | struct device *dev = &drvdata->csdev->dev;
| ^~~
drivers/hwtracing/coresight/coresight-cti-core.c: In function 'cti_disable_hw':
drivers/hwtracing/coresight/coresight-cti-core.c:154:24: warning: unused variable 'dev' [-Wunused-variable]
154 | struct device *dev = &drvdata->csdev->dev;
| ^~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Aishwarya TCV <Aishwarya.TCV@arm.com>
Cc: Cristian Marussi <Cristian.Marussi@arm.com>
Cc: Suzuki Poulose <Suzuki.Poulose@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Fixes: 665c157e0204 ("coresight: cti: Fix hang in cti_disable_hw()")
Link: https://lore.kernel.org/r/20221024135752.2b83af97@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cti_enable_hw() and cti_disable_hw() are called from an atomic context
so shouldn't use runtime PM because it can result in a sleep when
communicating with firmware.
Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock
management to the SCMI power domain""), this causes a hang on Juno when
running the Perf Coresight tests or running this command:
perf record -e cs_etm//u -- ls
This was also missed until the revert commit because pm_runtime_put()
was called with the wrong device until commit 692c9a499b28 ("coresight:
cti: Correct the parameter for pm_runtime_put")
With lock and scheduler debugging enabled the following is output:
coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti
BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec
preempt_count: 2, expected: 0
RCU nest depth: 0, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022
Call trace:
dump_backtrace+0x134/0x140
show_stack+0x20/0x58
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
__might_resched+0x180/0x228
__might_sleep+0x50/0x88
__pm_runtime_resume+0xac/0xb0
cti_enable+0x44/0x120
coresight_control_assoc_ectdev+0xc0/0x150
coresight_enable_path+0xb4/0x288
etm_event_start+0x138/0x170
etm_event_add+0x48/0x70
event_sched_in.isra.122+0xb4/0x280
merge_sched_in+0x1fc/0x3d0
visit_groups_merge.constprop.137+0x16c/0x4b0
ctx_sched_in+0x114/0x1f0
perf_event_sched_in+0x60/0x90
ctx_resched+0x68/0xb0
perf_event_exec+0x138/0x508
begin_new_exec+0x52c/0xd40
load_elf_binary+0x6b8/0x17d0
bprm_execve+0x360/0x7f8
do_execveat_common.isra.47+0x218/0x238
__arm64_sys_execve+0x48/0x60
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.4+0xfc/0x120
do_el0_svc+0x34/0xc0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
Fix the issue by removing the runtime PM calls completely. They are not
needed here because it must have already been done when building the
path for a trace.
Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver")
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Reported-by: Cristian Marussi <Cristian.Marussi@arm.com>
Suggested-by: Suzuki Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221005131452.1506328-1-james.clark@arm.com
|
|
With lockdeps enabled, we get the following warning:
======================================================
WARNING: possible circular locking dependency detected
------------------------------------------------------
kworker/u12:1/53 is trying to acquire lock:
ffff80000adce220 (coresight_mutex){+.+.}-{4:4}, at: coresight_set_assoc_ectdev_mutex+0x3c/0x5c
but task is already holding lock:
ffff80000add1f60 (ect_mutex){+.+.}-{4:4}, at: cti_probe+0x318/0x394
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (ect_mutex){+.+.}-{4:4}:
__mutex_lock_common+0xd8/0xe60
mutex_lock_nested+0x44/0x50
cti_add_assoc_to_csdev+0x4c/0x184
coresight_register+0x2f0/0x314
tmc_probe+0x33c/0x414
-> #0 (coresight_mutex){+.+.}-{4:4}:
__lock_acquire+0x1a20/0x32d0
lock_acquire+0x160/0x308
__mutex_lock_common+0xd8/0xe60
mutex_lock_nested+0x44/0x50
coresight_set_assoc_ectdev_mutex+0x3c/0x5c
cti_update_conn_xrefs+0x6c/0xf8
cti_probe+0x33c/0x394
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(ect_mutex);
lock(coresight_mutex);
lock(ect_mutex);
lock(coresight_mutex);
*** DEADLOCK ***
4 locks held by kworker/u12:1/53:
#0: ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1fc/0x63c
#1: (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x228/0x63c
#2: (&dev->mutex){....}-{4:4}, at: __device_attach+0x48/0x1a8
#3: (ect_mutex){+.+.}-{4:4}, at: cti_probe+0x318/0x394
To fix the same, call cti_add_assoc_to_csdev without the holding
coresight_mutex and confine the locking while setting the associated
ect / cti device using coresight_set_assoc_ectdev_mutex().
Fixes: 177af8285b59 ("coresight: cti: Enable CTI associated with devices")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20220721130329.3787211-1-sudeep.holla@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
|
|
After the conversion to automatically generating the ID_AA64DFR0_EL1
definition names, the build fails in a few different places because some
of the definitions were not changed to their new names along the way.
Update the names to resolve the build errors.
Fixes: c0357a73fa4a ("arm64/sysreg: Align field names in ID_AA64DFR0_EL1 with architecture")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220919160928.3905780-1-nathan@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
drivers/hwtracing/ptt/hisi_ptt.c:13:10: fatal error: linux/dma-iommu.h: No such file or directory
13 | #include <linux/dma-iommu.h>
| ^~~~~~~~~~~~~~~~~~~
Caused by:
commit ff0de066b463 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
interacting with:
commit f2042ed21da7 ("iommu/dma: Make header private")
from the iommu tree.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
[Fixed subject line and added changelog text]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Trace device
Add tune function for the HiSilicon Tune and Trace device. The interface
of tune is exposed through sysfs attributes of PTT PMU device.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220816114414.4092-4-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Trace device
HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex integrated
Endpoint(RCiEP) device, providing the capability to dynamically monitor and
tune the PCIe traffic and trace the TLP headers.
Add the driver for the device to enable the trace function. Register PMU
device of PTT trace, then users can use trace through perf command. The
driver makes use of perf AUX trace function and support the following
events to configure the trace:
- filter: select Root port or Endpoint to trace
- type: select the type of traced TLP headers
- direction: select the direction of traced TLP headers
- format: select the data format of the traced TLP headers
This patch initially add basic trace support of PTT device.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220816114414.4092-3-yangyicong@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
When building without CONFIG_CORESIGHT_CTI_INTEGRATION_REGS, there is a
warning about coresight_cti_reg_store() being unused in the file:
drivers/hwtracing/coresight/coresight-cti-sysfs.c:184:16: warning: 'coresight_cti_reg_store' defined but not used [-Wunused-function]
184 | static ssize_t coresight_cti_reg_store(struct device *dev,
| ^~~~~~~~~~~~~~~~~~~~~~~
This is expected as coresight_cti_reg_store() is only used in the
coresight_cti_reg_rw macro, which is only used in a block guarded by
CONFIG_CORESIGHT_CTI_INTEGRATION_REGS. Mark coresight_cti_reg_store() as
__maybe_unused to clearly indicate that the function may be unused
depending on the configuration.
Fixes: fbca79e55429 ("coresight: cti-sysfs: Re-use same functions for similar sysfs register accessors")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220901195055.1932340-1-nathan@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
New csdev_access functions were added as part of the previous
refactor. In order to make them more consistent with the
existing ones, change any signed offset types to be unsigned.
Now that they are unsigned, stop using hi_off = -1 to signify
a single 32bit access. Instead just call the existing 32bit
accessors. This is also applied to other parts of the codebase,
and the coresight_{read,write}_reg_pair() functions can be
deleted.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-6-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Currently each accessor macro creates an identical function which wastes
space in the text area and pollutes the ftrace function name list.
Change it so that the same function is used, but the register to access
is passed in as parameter rather than baked into each function.
Note that only the single accessor is used here and not
csdev_access_relaxed_read_pair() like in the previous commit, so
so a single unsigned offset value is stored instead.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-5-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Currently each accessor macro creates an identical function which wastes
space in the text area and pollutes the ftrace function names. Change it
so that the same function is used, but the register to access is passed
in as parameter rather than baked into each function.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-4-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The coresight_device struct is available in the sysfs accessor, and this
contains a csdev_access struct which can be used to access registers.
Use this instead of passing in the type of each drvdata so that a common
function can be shared between all the cs drivers.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-3-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The ability to use a custom function in this sysfs show function isn't
used so remove it.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20220830172614.340962-2-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Add a new sysfs interface in /sys/bus/coresight/devices/etm<N>/ts_source
indicating the configured timestamp source when the ETM device driver
was probed.
The perf tool will use this information to detect if the trace data
timestamp matches the kernel time, enabling correlation of CoreSight
trace with perf events.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20220823160650.455823-2-james.clark@arm.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Use the possessive "its" instead of the contraction "it's"
where appropriate.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220715015925.12569-1-rdunlap@infradead.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three independent sets of changes:
- Sai Prakash Ranjan adds tracing support to the asm-generic version
of the MMIO accessors, which is intended to help understand
problems with device drivers and has been part of Qualcomm's vendor
kernels for many years
- A patch from Sebastian Siewior to rework the handling of IRQ stacks
in softirqs across architectures, which is needed for enabling
PREEMPT_RT
- The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
the code behind that, after the last users of this old interface
made it in through the netdev, scsi, media and staging trees"
* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uapi: asm-generic: fcntl: Fix typo 'the the' in comment
arch/*/: remove CONFIG_VIRT_TO_BUS
soc: qcom: geni: Disable MMIO tracing for GENI SE
serial: qcom_geni_serial: Disable MMIO tracing for geni serial
asm-generic/io: Add logging support for MMIO accessors
KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
lib: Add register read/write tracing support
drm/meson: Fix overflow implicit truncation warnings
irqchip/tegra: Fix overflow implicit truncation warnings
coresight: etm4x: Use asm-generic IO memory barriers
arm64: io: Use asm-generic high level MMIO accessors
arch/*: Disable softirq stacks on PREEMPT_RT.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
CoreSight self-hosted tracing changes for v5.20.
- Fixes LOCKDEP warnings on module unload with configfs
- Conversion of DT bindings to DT schema
- Branch broadcast support for perf cs_etm
- Etm4x driver fixes for build failures with Clang and unrolled loops
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: avoid build failure with unrolled loops
Documentation: coresight: Expand branch broadcast documentation
Documentation: coresight: Link config options to existing documentation
Documentation: coresight: Turn numbered subsections into real subsections
coresight: Add config flag to enable branch broadcast
Documentation: coresight: Escape coresight bindings file wildcard
dt-bindings: arm: Convert CoreSight CPU debug to DT schema
dt-bindings: arm: Convert CoreSight bindings to DT schema
dt-bindings: arm: Rename Coresight filenames to match compatible
coresight: syscfg: Update load and unload operations
coresight: configfs: Fix unload of configurations on module exit
coresight: Clear the connection field properly
|
