summaryrefslogtreecommitdiff
path: root/drivers/iio/accel/Kconfig
AgeCommit message (Collapse)Author
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-14iio: accel: add support to LIS2DE12Robert Jones
Add support to STMicroelectronics LIS2DE12 accelerometer in st_accel framework. http://www.st.com/resource/en/datasheet/lis2de12.pdf Signed-off-by: Robert Jones <rjones@gateworks.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04drivers: iio: Kconfig: pedantic cleanupEnrico Weigelt, metux IT consult
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16iio: st-accel: add support for lis3deHeiko Stuebner
This commit add support for STMicroelectronics lis3de accelerometer. Datasheet for this device can be found here: https://www.st.com/resource/en/datasheet/lis3de.pdf Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-08iio: adxl372: Add support for I2C communicationStefan Popa
The adxl372 is designed to communicate in either SPI or I2C protocol. It autodetects the format being used, requiring no configuration control to select the format. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-08iio: adxl372: Refactor the driverStefan Popa
This patch restructures the existing adxl372 driver by adding a module for SPI and a header file, while the baseline module deals with the chip-logic. This is a necessary step, as this driver should support in the future a similar device which differs only in the type of interface used (I2C instead of SPI). Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: adxl372: New driver for Analog Devices ADXL372 AccelerometerStefan Popa
This patch adds basic support for Analog Devices ADXL372 SPI-Bus Three-Axis Digital Accelerometer. The device is probed and configured the with some initial default values. With this basic driver, it is possible to read raw acceleration data. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL372.pdf Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-15iio: adxl345: Add support for the ADXL375Lars-Peter Clausen
The ADXL375 is fully register map compatible to the ADXL345 (including the device ID register returning the same value ...). The only difference is the resolution of the acceleration sensor. The ADXL375 can measure up to +-200g of acceleration. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL375.PDF Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-30Staging: iio: adis16209: Move adis16209 driver out of stagingShreeya Patel
Move the adis16209 driver out of staging directory and merge to the mainline IIO subsystem. Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-24Staging: iio: accel: adis16201: Move adis16201 driver out of stagingHimanshu Jha
Move adis16201 driver out of staging and merge into mainline IIO subsystem. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-14platform/chrome: Add cros_ec_accel_legacy driverGwendal Grignou
Add driver to support older EC firmware that only support deprecated ec command. Rely on ACPI memory map register to access sensor information. Present same interface as the regular cros_ec sensor stack: - one iio device per accelerometer - use HTML5 axis definition - use iio abi units - accept calibration calls, but do nothing Chrome can use the same code than regular cros_ec sensor stack to calculate orientation and lid angle. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-09iio: accel: kxcjk1013: add support for KXTF9Michał Mirosław
KXTF9 has mostly compatible register layout to KXCJK accelerometer. There is no motion direction interrupt support, but there is tap direction detection instead (not implemented in this patch). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-03-04iio: accel: adxl345: Add SPI supportEva Rachel Retuya
Add SPI driver that initializes SPI regmap for the adxl345 core driver. The driver supports the same functionality as I2C namely the x, y, z and scale readings. Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-04iio: accel: adxl345: Split driver into core and I2CEva Rachel Retuya
Move I2C-specific code into its own file and rely on regmap to access registers. The core code provides access to x, y, z and scale readings. Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-04iio: accel: adxl345: Use I2C regmap instead of direct I2C accessEva Rachel Retuya
Convert the driver to use regmap instead of I2C-specific functions. This is done in preparation for splitting this driver into core and I2C-specific code as well as introduction of SPI driver. Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-05iio: accel: Add driver for the Analog Devices ADXL345 3-axis accelerometerEva Rachel Retuya
Add basic IIO support for the Analog Devices ADXL345 3-axis accelerometer. The datasheet can be found here: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Cc: Alison Schofield <amsfield22@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-23iio: accel: fix Kconfig warningLinus Walleij
commit 762227721fe6225be5b6d233ef681aea5871f5f3 "iio: accel: st_accel: handle deprecated bindings" attempted to be smart and let users use the old I2C driver and the new SPI driver, or the old SPI driver and the new I2C driver in combination for the LIS3LV02, and put the restrictions on the I2C and SPI subdrivers not not be combined with the old subdrivers. This doesn't work since the IIO ST accel top-level component selects the I2C and SPI subdrivers, resulting in the following Kconfig noise: warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_I2C_3AXIS which has unmet direct dependencies (IIO && !SENSORS_LIS3_I2C && IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_I2C) warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_SPI_3AXIS which has unmet direct dependencies (IIO && !SENSORS_LIS3_SPI && IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_SPI) (...) This fixes the issue by putting the dependencies directly in the top-level component instead, so that it never gets to select its unselectable subcomponent. Fixes: 762227721fe6 ("iio: accel: st_accel: handle deprecated bindings") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-10iio: accel: st_accel: handle deprecated bindingsLinus Walleij
The earlier deployed LIS3LV02DL driver had already defined a few DT bindings that need to be supported by the new more generic driver and listed as compatible but deprecated bindings in the documentation. After this we can start to activate the new driver with the old systems where applicable. As part of this enablement: make us depend on the old drivers not being in use so we don't get a kernel with two competing drivers. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-01iio: accel: st_accel: add support to lng2dmLorenzo Bianconi
add support to STMicroelectronics LNG2DM accelerometer to st_accel framework Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23staging:iio:accel:sca3000 Move out of staging.Jonathan Cameron
Now the driver is in a reasonable state, lets get it (finally) out of staging. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2016-10-11iio: accel: Add driver for the MiraMEMS DA280 3-axis 14-bit digital ↵Hans de Goede
accelerometer Add an iio driver for the MiraMEMS DA280 3-axis 14-bit accelerometer, as well as for the DA226 which is a fully compatible 2-axis version. Datasheets for the DA280 and DA226 can be found at the manufacturers site: http://www.miramems.com/en/products.asp?list=1 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-11iio: accel: Add driver for the MiraMEMS DA311 3-axis 12-bit digital ↵Hans de Goede
accelerometer This driver is based on the DA311 Android driver which can be found here: https://git.matricom.net/Firmware/kernel_amlogic_meson-common/tree/1e70113a5befd07debb68f537156def84c5be57a/drivers/amlogic/input/sensor the mir3da_* files are the DA311 driver. Unfortunately there is no datasheet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-11iio: accel: Add driver for dmard10 3-axis AccelerometerHans de Goede
Add a driver for the Domintech ARD10 3-axis Accelerometer, based on the android driver found here: https://github.com/domintech/dmard10 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: Add driver for the mCube MC3230 3-axis accelerometerHans de Goede
Add an IIO driver for the mCube MC3230 3-axis accelerometer. A datasheet for the mCube MC3230 can be found here: http://www.mcubemems.com/wp-content/uploads/2014/10/MC3230_2-Datasheet-APS-048-0007v1.6.pdf Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Add triggered buffer handlingLinus Walleij
As is custom with all modern sensors, add a clever burst mode that will just stream out values from the sensor and provide it to userspace to do the proper offsetting and scaling. This is the result when tested with an HRTimer trigger: $ generic_buffer -a -c 10 -n kxsd9 -t foo /sys/bus/iio/devices/iio:device1 foo 0.371318 0.718680 9.869872 1795.000000 97545896129 -0.586922 0.179670 9.378775 2398.000000 97555864721 -0.299450 0.179670 10.348992 2672.000000 97565874055 0.371318 0.335384 11.103606 2816.000000 97575883240 0.179670 0.574944 10.540640 2847.000000 97585862351 0.335384 0.754614 9.953718 2840.000000 97595872425 0.179670 0.754614 10.732288 2879.000000 97605882351 0.000000 0.754614 10.348992 2872.000000 97615891832 -0.730658 0.574944 9.570422 2831.000000 97625871536 0.000000 1.137910 10.732288 2872.000000 97635881610 Columns shown are x, y, z acceleration, so a positive acceleration of ~9.81 (shaky due to bad calibration) along the z axis. The fourth column is the AUX IN which is floating on this system, it seems to float up to the 2.85V VDD voltage. To be able to cleanup the triggered buffer, we need to add .remove() callbacks to the I2C and SPI subdrivers and call back into an exported .remove() callback in the core. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Add I2C transportLinus Walleij
This adds I2C regmap transport for the KXSD9 driver. Tested on the KXSD9 sensor on the APQ8060 Dragonboard. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Convert to use regmap for transportLinus Walleij
This converts the KXSD9 driver to drop the custom transport mechanism and just use regmap like everything else. Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18iio: accel: kxsd9: Split out SPI transportLinus Walleij
This moves the KXSD9 SPI transport out to its own file and Kconfig entry, so that we will be able to add another transport method. We export the common probe and add a local header file for the functionality shared between the main driver and the transport driver. We make the SPI transport the default for the driver if SPI is available and the KXSD9 driver was selected, so the oldconfig upgrade path will be clear. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05Merge 4.8-rc5 into staging-nextGreg Kroah-Hartman
We want the staging fixes in here as well to handle merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-21iio: accel: add support for the Domintech DMARD09 3-axis accelerometerJelle van der Waa
Minimal implementation of an IIO driver for the Domintech DMARD09 3-axis accelerometer. Only supports reading the x,y,z axes at the moment. Implementation based on the Android driver from the Acer Liquid E2 kernel sources. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-21iio: accel: Add support for Domintech DMARD06 accelerometerAleksei Mamlin
This patch add support for Domintech DMARD05, DMARD06 and DMARD07 accelerometers. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-15iio: add Kconfig selects needed for triggered buffer compilesAlison Schofield
Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile. Remove IIO_TRIGGER if present since IIO_BUFFER selects it. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-11iio: mma8452: update Freescale company informationMartin Kepplinger
NXP took over Freescale, so add NXP to the driver descriptions Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-14iio: accel: Add support for Bosch BMA220Tiberiu Breana
This commit adds basic support for the Bosch Sensortec BMA220 digital triaxial acceleration sensor. The device datasheet can be found here: http://www.mouser.com/pdfdocs/BSTBMA220DS00308.PDF Includes: - raw readings - ACPI detection - power management Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-04iio: accel: Add support for Freescale MMA7660FCConstantin Musca
Minimal implementation of an IIO driver for the Freescale MMA7660FC 3-axis accelerometer. Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MMA7660FC.pdf Includes: - ACPI support; - read_raw for x,y,z axes; - reading and setting the scale (range) parameter. - power management Signed-off-by: Constantin Musca <constantin.musca@intel.com> Reviewed-by: Martin Klepplinger <martink@posteo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12iio: mma8452: add support for FXLS8471QMartin Kepplinger
This adds support for Freescale's (now NXP's) FXLS8471Q accelerometer. We use MMA8451Q's configuration because for what the driver supports, FXLS8471Q is the same. Support for FXLS8471Q's features (fast SPI interface and a larger FIFO, among others) can be added to this driver anytime. See it's datasheet for the details: http://cache.nxp.com/files/sensors/doc/data_sheet/FXLS8471Q.pdf Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-12iio: accel: Add support for the h3lis331dl accelerometerTiberiu Breana
This commit adds support for STMicroelectronics h3lis331dl high-g accelerometer. The datasheet for this device can be found here: http://www.st.com/web/en/resource/technical/document/ datasheet/DM00053090.pdf Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Reviewed-by: Denis Ciocca <denis.ciocca@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-02-07Merge 4.5-rc3 into staging-nextGreg Kroah-Hartman
We want the upstream staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-01Merge tag 'iio-fixes-for-4.5a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.5 cycle. This set comprises those not dependent on patches in the 4.5 merge cycle. A second set will follow shortly with ones that are. * core in kernel interfaces - fix a possible NULL dereference that is a theoretical possibility via odd usage of iio_channel_release. Pretty much a hardening of the interface, but observed in the wild with the twl4030_charger driver. * acpi-als - report the data as processed as it is in lux. This fixes a wrong use of the IIO ABI. However, old _raw version retained to avoid breaking any userspace in the wild that is relying on that (none known but it doesn't hurt us much to retain it) * ade7753 - fix some error handling to avoid use of unitialized data. * ltr501 - use a signed return type for ltr501_match_samp_freq so as to allow returning of an error code. * mcp4725 - set name field of struct iio_dev to ensure the sysfs name attribute doesn't give NULL. * mpl115 - temperature offset sign is wrong. * stk8ba50 - IIO_TRIGGER dependency added * ti_am335x_adc - Label buffer as a software buffer. It's actually a hybrid of a true hardware buffer feeding a kfifo, but the meaning of these fields has changed a little recently and in this case it should be labeled a software buffer ensure it is allowed to use the kfifo. * vf610_adc - HAS_IOMEM dependency
2016-01-23iio: mma8452: add support for MMA8451QMartin Kepplinger
This adds support for this series' 14 bit accelerometer chip, MMA8451Q. It's datasheet is available at the vendor's website: https://cache.freescale.com/files/sensors/doc/data_sheet/MMA8451Q.pdf Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-04iio: add IIO_TRIGGER dependency to STK8BA50Vegard Nossum
Ran into this on UML: drivers/iio/accel/stk8ba50.c: In function ‘stk8ba50_data_rdy_trigger_set_state’: drivers/iio/accel/stk8ba50.c:163:9: error: implicit declaration of function ‘iio_trigger_get_drvdata’ [-Werror=implicit-function-declaration] iio_trigger_get_drvdata() is defined only when IIO_TRIGGER is selected. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-14iio: st-accel: add support for lis2dh12Giuseppe Barba
This commit add support for STMicroelectronics lis2dh12 accelerometer. Datasheet for this device can be found here: http://www.st.com/st-web-ui/static/active/en/resource/technical/ document/datasheet/DM00091513.pdf Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-01iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driverJoachim Eastwood
Add support for Freescale MMA7455L/MMA7456L 3-axis in 10-bit mode for I2C and SPI bus. This rather simple driver that currently doesn't support all the hardware features of MMA7455L/MMA7456L. Tested on Embedded Artist's LPC4357 Dev Kit with MMA7455L on I2C bus. Data sheets for the two devices can be found here: http://cache.freescale.com/files/sensors/doc/data_sheet/MMA7455L.pdf http://cache.freescale.com/files/sensors/doc/data_sheet/MMA7456L.pdf Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-25iio: accel: add support for Memsic MXC6255XC sensorTeodora Baluta
This patch adds a minimal implementation for the Memsic MXC6255XC orientation sensing accelerometer. The supported operations are reading raw acceleration values for X/Y axis that can be scaled using the exposed scale. Signed-off-by: Teodora Baluta <teodora.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: bmc150: Add SPI driverMarkus Pargmann
Add a simple SPI driver which initializes the spi regmap for the bmc150 core driver. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: bmc150: Split the driver into core and i2cMarkus Pargmann
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: bmc150: Use i2c regmapMarkus Pargmann
This replaces all usage of direct i2c accesses with regmap accesses. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: mma8452: add support for MMA8652FC and MMA8653FCMartin Kepplinger
MMA8652FC and MMA8653FC don't provide the transient interrupt source, so the motion interrupt source is used by providing a new iio_chan_spec definition, so that other supported devices are not affected by this. Datasheets for the newly supported devices are available at Freescale's website: http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8652FC.pdf http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8653FC.pdf Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: mma8452: add support for MMA8453Q accelerometer chipMartin Kepplinger
This adds support for the 10 bit version if Freescale's accelerometers of this series. The datasheet is available at Freescale's website: http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8453Q.pdf It creates a devicetree bindings file to document the new functionality and removes the driver from the trivial-devices list. Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-31iio: mxc4005: add triggered buffer mode for mxc4005Teodora Baluta
This patch adds support for buffered readings for the 3-axis accelerometer mxc4005. Signed-off-by: Teodora Baluta <teodora.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-29 15:04:28 +0000