summaryrefslogtreecommitdiff
path: root/drivers/iio/common
AgeCommit message (Collapse)Author
2024-08-03iio: common: cros_ec_sensors_core: use new '.masklength' accessorsNuno Sa
Make use of iio_get_masklength) and iio_for_each_active_channel() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240726-dev-iio-masklength-private3-v1-21-82913fc0fb87@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-08-03iio: common: scmi_iio: Remove unnecessary u64 type castThorsten Blum
The variable uHz already has the type u64 and casting it to u64 is unnecessary. Remove the redundant type cast. Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Link: https://patch.msgid.link/20240711134502.168484-1-thorsten.blum@toblux.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-30iio: common: scmi_iio: convert to dev_err_probe()Nuno Sa
Make use of dev_err_probe() and dev_err_ptr_probe() to simplify error paths during probe. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240606-dev-add_dev_errp_probe-v3-4-51bb229edd79@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-29iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()Kaustabh Chakraborty
Hard matching against the WhoAmI values isn't ideal for using devices which are compatible with existing ones. Instead of raising an error, issue a warning instead, thus allowing the driver to continue probing. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> Link: https://patch.msgid.link/20240625082800.62305-1-kauschluss@disroot.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-05-27iio: invensense: fix odr switching to same valueJean-Baptiste Maneyrol
ODR switching happens in 2 steps, update to store the new value and then apply when the ODR change flag is received in the data. When switching to the same ODR value, the ODR change flag is never happening, and frequency switching is blocked waiting for the never coming apply. Fix the issue by preventing update to happen when switching to same ODR value. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20240524124851.567485-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-05-03iio: invensense: fix timestamp glitches when switching frequencyJean-Baptiste Maneyrol
When a sensor is running and there is a FIFO frequency change due to another sensor turned on/off, there are glitches on timestamp. Fix that by using only interrupt timestamp when there is the corresponding sensor data in the FIFO. Delete FIFO period handling and simplify internal functions. Update integration inside inv_mpu6050 and inv_icm42600 drivers. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: Stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20240426094835.138389-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-05-01iio: invensense: fix interrupt timestamp alignmentJean-Baptiste Maneyrol
Restrict interrupt timestamp alignment for not overflowing max/min period thresholds. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20240426135814.141837-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-01-23iio: invensense: remove redundant initialization of variable periodColin Ian King
The variable period is being initialized with a value that is never read, it is being re-assigned a new value later on before it is read. The initialization is redundant and can be removed. Cleans up clang scan build warning: Value stored to 'period' during its initialization is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20240106153202.54861-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time tableJavier Carrasco
The HTU21 offers 4 sampling frequencies: 20, 40, 70 and 120, which are associated to an index that is used to select the right measurement resolution and its corresponding measurement time. The current implementation selects the measurement resolution and the temperature measurement time properly, but it does not select the right humidity measurement time in all cases. In summary, the 40 and 70 humidity measurement times are swapped. The reason for that is probably the unusual coding for the measurement resolution. According to the datasheet, the bits [7,0] of the "user register" are used as follows to select the bit resolution: -------------------------------------------------- | Bit 7 | Bit 0 | RH | Temp | Trh (us) | Tt (us) | -------------------------------------------------- | 0 | 0 | 12 | 14 | 16000 | 50000 | -------------------------------------------------- | 0 | 1 | 8 | 12 | 3000 | 13000 | -------------------------------------------------- | 1 | 0 | 10 | 13 | 5000 | 25000 | -------------------------------------------------- | 1 | 1 | 11 | 11 | 8000 | 7000 | -------------------------------------------------- *This table is available in the official datasheet, page 13/21. I have just appended the times provided in the humidity/temperature tables, pages 3/21, 5/21. Note that always a pair of resolutions is selected. The sampling frequencies [20, 40, 70, 120] are assigned to a linear index [0..3] which is then coded as follows [1]: Index [7,0] -------------- idx 0 0,0 idx 1 1,0 idx 2 0,1 idx 3 1,1 That is done that way because the temperature measurements are being used as the reference for the sampling frequency (the frequencies and the temperature measurement times are correlated), so increasing the index always reduces the temperature measurement time and its resolution. Therefore, the temperature measurement time array is as simple as [50000, 25000, 13000, 7000] On the other hand, the humidity resolution cannot follow the same pattern because of the way it is coded in the "user register", where both resolutions are selected at the same time. The humidity measurement time array is the following: [16000, 3000, 5000, 8000], which defines the following assignments: Index [7,0] Trh ----------------------- idx 0 0,0 16000 -> right, [0,0] selects 12 bits (Trh = 16000) idx 1 1,0 3000 -> wrong! [1,0] selects 10 bits (Trh = 5000) idx 2 0,1 5000 -> wrong! [0,1] selects 8 bits (Trh = 3000) idx 3 1,1 8000 -> right, [1,1] selects 11 bits (Trh = 8000) The times have been ordered as if idx = 1 -> [0,1] and idx = 2 -> [1,0], which is not the case for the reason explained above. So a simple modification is required to obtain the right humidity measurement time array, swapping the values in the positions 1 and 2. The right table should be the following: [16000, 5000, 3000, 8000] Fix the humidity measurement time array with the right idex/value coding. [1] The actual code that makes this coding and assigns it to the current value of the "user register" is the following: config_reg &= 0x7E; config_reg |= ((i & 1) << 7) + ((i & 2) >> 1); Fixes: d574a87cc311 ("Add meas-spec sensors common part") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231026-topic-htu21_conversion_time-v1-1-bd257dc44209@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-05iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()Tzung-Bi Shih
cros_ec_sensors_push_data() reads `indio_dev->active_scan_mask` and calls iio_push_to_buffers_with_timestamp() without making sure the `indio_dev` stays in buffer mode. There is a race if `indio_dev` exits buffer mode right before cros_ec_sensors_push_data() accesses them. An use-after-free on `indio_dev->active_scan_mask` was observed. The call trace: [...] _find_next_bit cros_ec_sensors_push_data cros_ec_sensorhub_event blocking_notifier_call_chain cros_ec_irq_thread It was caused by a race condition: one thread just freed `active_scan_mask` at [1]; while another thread tried to access the memory at [2]. Fix it by calling iio_device_claim_buffer_mode() to ensure the `indio_dev` can't exit buffer mode during cros_ec_sensors_push_data(). [1]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/industrialio-buffer.c#L1189 [2]: https://elixir.bootlin.com/linux/v6.5/source/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c#L198 Cc: stable@vger.kernel.org Fixes: aa984f1ba4a4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO") Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230829030622.1571852-1-tzungbi@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-13Merge 6.5-rc6 into char-misc-nextGreg Kroah-Hartman
We need the char/misc fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-29iio: cros_ec: Fix the allocation size for cros_ec_commandYiyuan Guo
The struct cros_ec_command contains several integer fields and a trailing array. An allocation size neglecting the integer fields can lead to buffer overrun. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Yiyuan Guo <yguoaz@gmail.com> Fixes: 974e6f02e27e ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.") Link: https://lore.kernel.org/r/20230630143719.1513906-1-yguoaz@gmail.com Cc: <Stable@vger.kerenl.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: make invensense timestamp module genericJean-Baptiste Maneyrol
Rename common module to inv_sensors_timestamp, add configuration at init (chip internal clock, acceptable jitter, ...) and update inv_icm42600 driver integration. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230606162147.79667-4-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-07-20iio: move inv_icm42600 timestamp module in commonJean-Baptiste Maneyrol
Create new inv_sensors common modules and move inv_icm42600 timestamp module inside. This module will be used by IMUs and also in the future by other chips. Modify inv_icm42600 driver to use timestamp module and do some headers cleanup. Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230606162147.79667-3-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: Rename iio_trigger_poll_chained and add kernel-docMehdi Djait
Rename the function to iio_trigger_poll_nested. Add kernel-doc with a note on the context where the function is expected to be called. Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com> Link: https://lore.kernel.org/r/841b533cba28ca25a8e87280c44e45979166e8e2.1677761379.git.mehdi.djait.k@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: common: scmi_iio: use sysfs_emit() to instead of scnprintf()ye xingchen
Replace the open-code with sysfs_emit() to simplify the code. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202212011156314630626@zte.com.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: Don't silently expect attribute typesMatti Vaittinen
The iio_triggered_buffer_setup_ext() and the devm_iio_kfifo_buffer_setup_ext() were changed by commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). When using IIO_CONST_ATTRs the added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the function signatures to expect an array of iio_dev_attrs to avoid similar errors in the future. Merge conflict resolved whilst applying due to patch crossing with two new drivers (kx022a accelerometer and ad4130 ADC). Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/63f54787a684eb1232f1c5d275a09c786987fe4a.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-23iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable()Jonathan Cameron
These drivers only turns the power on at probe and off via a custom devm_add_action_or_reset() callback. The two regulators were handled separately so also switch to bulk registration. The new devm_regulator_bulk_get_enable() replaces all this boilerplate code. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221016163409.320197-8-jic23@kernel.org
2022-11-23iio: common: scmi_iio: do not use internal iio_dev lockNuno Sá
The iio_device lock is only meant for internal use. Hence define a device local lock to protect against concurrent accesses. While at it, properly include "mutex.h" for mutex related APIs. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20221004134909.1692021-12-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-28iio: common: scmi_sensors: use HZ macro from units.hDmitry Rokosov
Remove duplicated definition of UHZ_PER_HZ, because it's available in the units.h as MICROHZ_PER_HZ. Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220812165243.22177-5-ddrokosov@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-08-19iio: st_sensors: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210017.6817-1-wsa+renesas@sang-engineering.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-18iio: cros: Register FIFO callback after sensor is registeredGwendal Grignou
Instead of registering callback to process sensor events right at initialization time, wait for the sensor to be register in the iio subsystem. Events can come at probe time (in case the kernel rebooted abruptly without switching the sensor off for instance), and be sent to IIO core before the sensor is fully registered. Fixes: aa984f1ba4a4 ("iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO") Reported-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220711144716.642617-1-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-14iio: common: cros_ec_sensors: explicitly add proper header filesNuno Sá
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220610084545.547700-13-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-14iio: common: cros_ec_lid_angle: explicitly add proper header filesNuno Sá
Do not trust the fact that iio.h includes of.h which in turn includes all the headers we are relying on. The ultimate goal is to actually drop of.h from iio.h. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220610084545.547700-12-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-14iio: common: ssp: Fix alignment for DMA safetyJonathan Cameron
____cacheline_aligned is an insufficient guarantee for non-coherent DMA on platforms with 128 byte cachelines above L1. Switch to the updated IIO_DMA_MINALIGN definition. Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220508175712.647246-43-jic23@kernel.org
2022-06-11iio: common: cros_ec_sensors: Add label attributeGwendal Grignou
When sensor location is known, populate iio sysfs "label" attribute: * "accel-base" : the sensor is in the base of the convertible (2-1) device. * "accel-display" : the sensor is in the lid/display plane of the device. * "accel-camera" : the sensor is in the swivel camera subassembly. The non-standard |location| attribute is removed, the field |loc| in cros_ec_sensors_core_state is removed. It apply to standalone accelerometer as well as IMU (accelerometer + gyroscope) and sensors where the location is known (light). Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20220427190804.961697-3-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: Replace strtobool() with kstrtobool()Lars-Peter Clausen
strtobool() is deprecated and just a wrapper around kstrtobool().Replace it with kstrtobool() so the deprecated function can be removed eventually. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220409105812.2113895-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: core: Simplify the registration of kfifo buffersMiquel Raynal
Among all the users of the kfifo buffers, no one uses the INDIO_BUFFER_HARDWARE mode. So let's take this as a general rule and simplify a little bit the internals - overall the documentation - by eliminating unused specific cases. Use the INDIO_BUFFER_SOFTWARE mode by default with kfifo buffers, which will basically mimic what all the "non direct" modes do. Cc: Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <groeck@chromium.org> Cc: Jyoti Bhayana <jbhayana@google.com> Cc: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-13-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: st_sensors: Use iio_device_claim/release_direct_mode() when relevantMiquel Raynal
The st_sensors_core driver hardcodes the content of the iio_device_claim_direct_mode() and iio_device_release_direct_mode() helpers. Let's get rid of this handcrafted implementation and use the proper core helpers instead. Additionally, this lowers the tab level (which is always good) and prevents the use of the ->currentmode variable which is not supposed to be used like this anyway. Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-9-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: st_sensors: Add a local lock for protecting odrMiquel Raynal
Right now the (framework) mlock lock is (ab)used for multiple purposes: 1- protecting concurrent accesses over the odr local cache 2- avoid changing samplig frequency whilst buffer is running Let's start by handling situation #1 with a local lock. Suggested-by: Jonathan Cameron <jic23@kernel.org> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-10iio: st_sensors: Drop the protection on _avail functionsMiquel Raynal
The use of a lock there seems pointless. Besides preventing to read these information from userspace while buffers are enabled (which is not supposed to happen), it only protect read accesses over static const values, which are never supposed to be written anyway. Drop these lock calls. Suggested-by: Jonathan Cameron <jic23@kernel.org> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-6-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-04iio: ssp_sensors: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220331230632.957634-2-jakobkoschel@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-02-18iio:common:ssp: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etcJonathan Cameron
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of ifdef based config guards. Also switch to SIMPLE_DEV_PM_OPS rather than open coding the structure. Removing instances of this approach from IIO also stops them being copied into new drivers. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220130193147.279148-17-jic23@kernel.org
2022-02-18iio:common:ssp_sensors: Move exports into IIO_SSP_SENSORS namespaceJonathan Cameron
In order to avoid unnecessary pollution of the global symbol namespace move the common/library functions into a specific namespace and import that into the various specific device drivers that use them. For more information see https://lwn.net/Articles/760045/ Both the exports used between the two common modules and the individual drivers are moved to a single namespace as greater granularity does not feel useful. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220130205701.334592-6-jic23@kernel.org
2022-02-18iio:common:meas-spec: Move exports into IIO_MEAS_SPEC_SENSORSJonathan Cameron
The obvious choice of ms_sensors felt rather too likely to clash with other namespaces introduced in future, hence the longer abbreviation. In order to avoid unnecessary pollution of the global symbol namespace move the common/library functions into a specific namespace and import that into the various specific device drivers that use them. For more information see https://lwn.net/Articles/760045/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: William Markezana <william.markezana@meas-spec.com> Cc: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220130205701.334592-5-jic23@kernel.org
2022-02-18iio:st-sensors: Move exports into IIO_ST_SENSORS namespaceJonathan Cameron
To avoid unnecessary pollution of the global symbol namespace move the driver core and type specific core exports into their a new namespace and import that where needed. For more info see https://lwn.net/Articles/760045/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Denis Ciocca <denis.ciocca@st.com> Link: https://lore.kernel.org/r/20220116180535.2367780-14-jic23@kernel.org
2022-02-18iio:st-sensors: Remove duplicate MODULE_*Jonathan Cameron
The core module and type specific core modules are made up of several files. There is no benefit in duplicating the MODULE_* macros in each file so remove them. Noticed whilst adding MODULE_IMPORT_NS() as I missed some files and it still worked, making it clear not all of these blocks were needed. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Denis Ciocca <denis.ciocca@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220116180535.2367780-13-jic23@kernel.org
2022-02-13iio: ssp_sensors: Make use of device propertiesAndy Shevchenko
Convert the module to be property provider agnostic and allow it to be used on non-OF platforms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220210135724.26660-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-02-09spi: make remove callback a void functionUwe Kleine-König
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-01-23iio: ms_sensors: Use sysfs_emit()Lars-Peter Clausen
sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. Use sysfs_emit() to format the custom `battery_low` and `heater_enable` device attributes of the ms_sensors driver shared code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211216185217.1054495-12-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-01-23iio: st_sensors: don't always auto-enable I2C and SPI interface driversNikita Yushchenko
This patch makes I2C and SPI interface drivers for STMicroelectronics sensor chips individually selectable via Kconfig. The default is kept unchanged - I2C and SPI interface drivers are still selected by default if the corresponding bus support is available. However, the patch makes it possible to explicitly disable drivers that are not needed for a particular target. Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220110152432.3799227-1-nikita.yoush@cogentembedded.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-11-17iio/scmi: Add reading "raw" attribute.Andriy Tryshnivskyy
Add IIO_CHAN_INFO_RAW to the mask and implement corresponding reading "raw" attribute in scmi_iio_read_raw. Signed-off-by: Andriy Tryshnivskyy <andriy.tryshnivskyy@opensynergy.com> Acked-by: Jyoti Bhayana <jbhayana@google.com> Link: https://lore.kernel.org/r/20211024091627.28031-3-andriy.tryshnivskyy@opensynergy.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-11-17iio: st-sensors: Use dev_to_iio_dev() in sysfs callbacksLars-Peter Clausen
Using `dev_get_drvdata()` in IIO sysfs callbacks to get a pointer to the IIO device is a relic from the very early days of IIO. The IIO core as well as most other drivers have switched over to using `dev_to_iio_dev()` instead. This driver is one of the last few drivers remaining that uses the outdated idiom, update it. This will allow to eventually update the IIO core to no longer set the drvdata for the IIO device and free it up for driver usage. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211020085349.16178-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-11-10Merge tag 'tag-chrome-platform-for-v5.16' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Clean up use of cros_ec_check_features cros_ec_*: - Rename and move cros_ec_pd_command to cros_ec_command, and make changes to cros_ec_typec and cros_ec_proto to use the new common command, reducing duplication. sensorhub: - simplify getting .driver_data in cros_ec_sensors_core and cros_ec_sensorhub misc: - Maintainership change. Enric Balletbo i Serra has moved on from Collabora, so removing him from chrome/platform maintainers. Thanks for all of your hard work maintaining this, Enric, and best of luck to you in your new role! - Add Prashant Malani as driver maintainer for cros_ec_typec.c and cros_usbpd_notify. He was already principal contributor of these drivers" * tag 'tag-chrome-platform-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_proto: Use ec_command for check_features platform/chrome: cros_ec_proto: Use EC struct for features MAINTAINERS: Chrome: Drop Enric Balletbo i Serra platform/chrome: cros_ec_typec: Use cros_ec_command() platform/chrome: cros_ec_proto: Add version for ec_command platform/chrome: cros_ec_proto: Make data pointers void platform/chrome: cros_usbpd_notify: Move ec_command() platform/chrome: cros_usbpd_notify: Rename cros_ec_pd_command() platform/chrome: cros_ec: Fix spelling mistake "responsed" -> "response" platform/chrome: cros_ec_sensorhub: simplify getting .driver_data iio: common: cros_ec_sensors: simplify getting .driver_data platform/chrome: cros-ec-typec: Cleanup use of check_features platform/chrome: cros_ec_proto: Fix check_features ret val MAINTAINERS: Add Prashant's maintainership of cros_ec drivers
2021-10-19Merge tag 'iio-for-5.16a-split-take4' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: First set of IIO new device and feature support for the 5.16 cycle Counter subsystem changes now sent separately. This has been a busy cycle, so lots here and a few more stragglers to come next week. Big new feature in this cycle is probably output buffer support. This has been in the works for a very long time so it's great to see Mihail pick up the challenge and build upon his predecessors work to finally bring this feature to mainline. New device support ------------------ * adi,adxl313 - New driver and dt bindings for this low power accelerometer. * adi,adxl355 - New driver and dt bindings for this accelerometer. - Later series adds buffer support. * asahi-kasei,ak8975 - Minor additions to driver to support ak09916 * aspeed,aspeed-adc - Substantial rework plus feature additions to add support for the ast2600 including a new dt bindings doc. * atmel,at91_sama5d2 - Rework and support introduced for the sama7g5 parts. * maxim,max31865 - New driver and bindings for this RTD temperature sensor chip. * nxp,imx8qxp - New driver and bindings for the ADC found on the i.MX 8QuadXPlus Soc. * senseair,sunrise - New driver and bindings for this family of carbon dioxide gas sensors. * sensiron,scd4x - New driver and bindings for this carbon dioxide gas sensor. New features ------------ * Output buffer support. Works in a similar fashion to input buffers, but in this case userspace pushes data into the kfifo which is then drained to the device when a trigger occurs. Support added to the ad5766 DAC driver. * Core, devm_iio_map_array_register() to avoid need for devm_add_action_or_reset() based cleanup in fully managed allocation drivers. * Core iio_push_to_buffers_with_ts_unaligned() function to safely handle a few drivers where it really hard to ensure the correct data alignment in an iio_push_to_buffers_with_timestamp() call. Note this uses a bounce buffer so should be avoided whenever possible. Used in the ti,adc108s102, invense,mpu3050 and adi,adis16400. This closes the last known set of drivers with alignment issues at this interface. * maxim,max1027 - Substantial rework to this driver main target of which was supporting use of other triggers than it's own EOC interrupt. - Transfer optimization. * nxp,fxls8962af - Threshold even support including using it as a wakeup source. Cleanups, minor fixes etc ------------------------- Chances of a common type to multiple drivers: * devm_ conversion and drop of .remove() callbacks in: - adi,ad5064 - adi,ad7291 - adi,ad7303 - adi,ad7746 - adi,ad9832 - adi,adis16080 - dialog,da9150-gpadc - intel,mrfld_adc - marvell,berlin2 - maxim,max1363 - maxim,max44000 - nuvoton,nau7802 - st_sensors (includes a lot of rework!) - ti,ads8344 - ti,lp8788 * devm_platform_ioremap_resource() used to reduce boilerplate - cirrus,ep93xx - rockchip,saradc - stm,stm32-dac * Use dev_err_probe() in more places to both not print on deferred probe and ensure a reason for the deferral is available for debug purposes. - adi,ad8801 - capella,cm36651 - linear,ltc1660 - maxim,ds4424 - maxim,max5821 - microchip,mcp4922 - nxp,lpc18xx - onnn,noa1305 - st,lsm9ds0 - st,st_sensors - st,stm32-dac - ti,afe4403 - ti,afe4404 - ti,dac7311 * Drop error returns in SPI and I2C remove() functions as they are ignored and long term plan is to change these all over to returning void. In some cases these patches just make it 'obvious' they always return 0 where it was the case before but not easy to tell. - adi,ad5380 - adi,ad5446 - adi,ad5686 - adi,ad5592r - bosch,bma400 - bosch,bmc150 - fsl,mma7455 - honeywell,hmc5843 - kionix,kxsd9 - maxim,max5487 - meas,ms5611 - ti,afe4403 Driver specific changes * adi,ad5770r - Bring driver inline with documented bindings. * adi,ad7746 - Trivial style fix * adi,ad7949 - Express some magic values as the underlying parts via new #defines. - Make it work with SPI controllers that don't support 14 or 16 bit messages - Support selection of voltage reference from dt including expanding the dt-bindings to cover this new functionality. * adi,ad799x - Implement selection of external reference voltage on AD7991, AD7995 and AD7999. - Add missing dt-bindings doc for devices supported by this driver. * adi,adislib - Move interrupt startup to better location in startup flow. - Handle devices that cannot mask/unmask the drdy pin and must instead mask at the interrupt controller. Applies to the adis16460 and adis16475 from which we then drop equivalent code. * adi,ltc2983 - Add support for optional reset pin. - Fail to probe if no channels specified in dt binding. * asahi-kasei,ak8975 - dt-binding additions of missing vid-supply regulator. * aspeed,aspeed-adc - Typo fix. * fsl,mma7660 - Mark acpi_device_id table __maybe_unused to avoid build warning. * fsl,imx25-gcq - Avoid initializing regulators that aren't used. * invensense,mpu3050 - Drop a dead protection against a clash with the old input driver. * invensense,mpu6050 - Rework code to not use strcpy() and hence avoid possibility of wrong sized buffers. Note this wasn't a bug, but the new code is a lot more readable. - Mark acpi_device_id table __maybe_unused to avoid build warning. * kionix,kxcjk1013 - dt-binding addition to note it supports interrupts. * marvell,berlin2-adc - Enable COMPILE_TEST building. * maxim,max1027 - Avoid returning success in an error path. * nxp,imx8qxp - Fix warning when runtime pm not enabled via __maybe_unused. * ricoh,rn5t618 - Use the new devm_iio_map_array_register() instead of open coding the same. * samsung,exynos_adc - Improve kconfig help text. * st,lsm6dsx - Move max_fifo_size into the fifo_ops structure where the other configuration parameters are found. * st,st_sensors: - Reorder to ensure we turn the power off after removing userspace interfaces. * senseair,sunrise - Add missing I2C dependency. * ti,twl6030 - Small code tidy up. * tag 'iio-for-5.16a-split-take4' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (148 commits) iio: imx8qxp-adc: mark PM functions as __maybe_unused iio: pressure: ms5611: Make ms5611_remove() return void iio: potentiometer: max5487: Don't return an error in .remove() iio: magn: hmc5843: Make hmc5843_common_remove() return void iio: health: afe4403: Don't return an error in .remove() iio: dac: ad5686: Make ad5686_remove() return void iio: dac: ad5592r: Make ad5592r_remove() return void iio: dac: ad5446: Make ad5446_remove() return void iio: dac: ad5380: Make ad5380_remove() return void iio: accel: mma7455: Make mma7455_core_remove() return void iio: accel: kxsd9: Make kxsd9_common_remove() return void iio: accel: bmi088: Make bmi088_accel_core_remove() return void iio: accel: bmc150: Make bmc150_accel_core_remove() return void iio: accel: bma400: Make bma400_remove() return void drivers:iio:dac:ad5766.c: Add trigger buffer iio: triggered-buffer: extend support to configure output buffers iio: kfifo-buffer: Add output buffer support iio: Add output buffer support iio: documentation: Document scd4x calibration use drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor ...
2021-10-19iio: triggered-buffer: extend support to configure output buffersAlexandru Ardelean
Now that output (kfifo) buffers are supported, we need to extend the {devm_}iio_triggered_buffer_setup_ext() parameter list to take a direction parameter. This allows us to attach an output triggered buffer to a DAC device. Unfortunately it's a bit difficult to add another macro to avoid changing 5 drivers where {devm_}iio_triggered_buffer_setup_ext() is used. Well, it's doable, but may not be worth the trouble vs just updating all these 5 drivers. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Mihail Chindris <mihail.chindris@analog.com> Link: https://lore.kernel.org/r/20211007080035.2531-4-mihail.chindris@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-19iio: st_sensors: Make use of the helper function dev_err_probe()Cai Huoqing
When possible use dev_err_probe help to properly deal with the PROBE_DEFER error, the benefit is that DEFER issue will be logged in the devices_deferred debugfs file. Using dev_err_probe() can reduce code size, and the error value gets printed. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210928014055.1431-1-caihuoqing@baidu.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-09-27iio: common: cros_ec_sensors: simplify getting .driver_dataWolfram Sang
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210920090522.23784-7-wsa+renesas@sang-engineering.com
2021-09-18iio: ssp_sensors: add more range checking in ssp_parse_dataframe()Dan Carpenter
The "idx" is validated at the start of the loop but it gets incremented during the iteration so it needs to be checked again. Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210909091336.GA26312@kili Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-26 15:15:48 +0000