summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)Author
2023-04-27Merge tag 'char-misc-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc drivers updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits) mcb-lpc: Reallocate memory region to avoid memory overlapping mcb-pci: Reallocate memory region to avoid memory overlapping mcb: Return actual parsed size when reading chameleon table kernel/configs: Drop Android config fragments virt: acrn: Replace obsolete memalign() with posix_memalign() spmi: Add a check for remove callback when removing a SPMI driver spmi: fix W=1 kernel-doc warnings spmi: mtk-pmif: Drop of_match_ptr for ID table spmi: pmic-arb: Convert to platform remove callback returning void spmi: mtk-pmif: Convert to platform remove callback returning void spmi: hisi-spmi-controller: Convert to platform remove callback returning void w1: gpio: remove unnecessary ENOMEM messages w1: omap-hdq: remove unnecessary ENOMEM messages w1: omap-hdq: add SPDX tag w1: omap-hdq: allow compile testing w1: matrox: remove unnecessary ENOMEM messages w1: matrox: use inline over __inline__ w1: matrox: switch from asm to linux header w1: ds2482: do not use assignment in if condition w1: ds2482: drop unnecessary header ...
2023-04-27Merge tag 'spi-v6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly standard release for SPI with the exception of a change to the API for specifying chip selects done in preparation for supporting devices with more than one chip select, this required some mechanical changes throughout the tree which have been cooking in -next happily for a while. There's also a new API to allow us to support TPM chips on half duplex controllers. Summary: - Refactoring in preparation for supporting multiple chip selects for a single device, needed by some flash devices, which required a change in the SPI device API visible throughout the tree - Support for hardware assisted interaction with SPI TPMs on half duplex controllers, implemented on nVidia Tedra210 QuadSPI - Optimisation for large transfers on fsl-cpm devices - Cleanups around device property use which fix some sisues with fwnode - Use of both void remove() and devm_platform_.*ioremap_resource() - Support for AMD Pensando Elba, Amlogic A1, Cadence device mode, Intel MetorLake-S and StarFive J7110 QuadSPI" * tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits) spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: tegra210-quad: Enable TPM wait polling spi: Add TPM HW flow flag spi: bcm63xx: remove PM_SLEEP based conditional compilation spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: spi-cadence: Add support for Slave mode spi: spi-cadence: Switch to spi_controller structure spi: cadence-quadspi: fix suspend-resume implementations spi: dw: Add support for AMD Pensando Elba SoC spi: dw: Add AMD Pensando Elba SoC SPI Controller spi: cadence-quadspi: Disable the SPI before reconfiguring spi: cadence-quadspi: Update the read timeout based on the length spi: spi-loopback-test: Add module param for iteration length spi: add support for Amlogic A1 SPI Flash Controller dt-bindings: spi: add Amlogic A1 SPI controller spi: fsl-spi: No need to check transfer length versus word size spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void spi: fsl-cpm: Use 16 bit mode for large transfers with even size spi: fsl-spi: Re-organise transfer bits_per_word adaptation spi: fsl-spi: Fix CPM/QE mode Litte Endian ...
2023-04-25Merge tag 'acpi-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20230331, fix the ACPI SBS driver and the evaluation of the _PDC method on Xen dom0 in the ACPI processor driver, update the ACPI driver for Intel SoCs and clean up code in multiple places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20230331 including the following changes: * Delete bogus node_array array of pointers from AEST table (Jessica Clarke) * Add support for trace buffer extension in GICC to the ACPI MADT parser (Xiongfeng Wang) * Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID() (Xiongfeng Wang) * Add missing tables to astable (Pedro Falcato) * Add support for 64 bit loong_arch compilation to ACPICA (Huacai Chen) * Add support for ASPT table in disassembler to ACPICA (Jeremi Piotrowski) * Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary) * Update all copyrights/signons in ACPICA to 2023 (Bob Moore) * Add support for ClockInput resource (v6.5) (Niyas Sait) * Add RISC-V INTC interrupt controller definition to the list of supported interrupt controllers for MADT (Sunil V L) * Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L) * Address several cases in which the ACPICA code might lead to undefined behavior (Tamir Duberstein) * Make ACPICA code support flexible arrays properly (Kees Cook) * Check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects() (void0red) * Add os specific support for Zephyr RTOS to ACPICA (Najumon) * Update version to 20230331 (Bob Moore) - Fix evaluating the _PDC ACPI control method when running as Xen dom0 (Roger Pau Monne) - Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu) - Check for null return of devm_kzalloc() in fch_misc_setup() (Kang Chen) - Log a message if enable_irq_wake() fails for the ACPI SCI (Simon Gaiser) - Initialize the correct IOMMU fwspec while parsing ACPI VIOT (Jean-Philippe Brucker) - Amend indentation and prefix error messages with FW_BUG in the ACPI SPCR parsing code (Andy Shevchenko) - Enable ACPI sysfs support for CCEL records (Kuppuswamy Sathyanarayanan) - Make the APEI error injection code warn on invalid arguments when explicitly indicated by platform (Shuai Xue) - Add CXL error types to the error injection code in APEI (Tony Luck) - Refactor acpi_data_prop_read_single() (Andy Shevchenko) - Fix two issues in the ACPI SBS driver (Armin Wolf) - Replace ternary operator with min_t() in the generic ACPI thermal zone driver (Jiangshan Yi) - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki) - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede) - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring) - Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K) - Update the pm_profile sysfs attribute documentation (Rafael Wysocki) - Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to the ACPI driver for Intel SoCs (Hans de Goede)" * tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail ACPI: bus: Ensure that notify handlers are not running after removal ACPI: bus: Add missing braces to acpi_sb_notify() ACPI: video: Remove desktops without backlight DMI quirks ACPI: video: Remove register_backlight_delay module option and code ACPI: Replace irqdomain.h include with struct declarations fpga: lattice-sysconfig-spi: Add explicit include for of.h tpm: atmel: Add explicit include for of.h virtio-mmio: Add explicit include for of.h pata: ixp4xx: Add explicit include for of.h ata: pata_macio: Add explicit include of irqdomain.h serial: 8250_tegra: Add explicit include for of.h net: rfkill-gpio: Add explicit include for of.h staging: iio: resolver: ad2s1210: Add explicit include for of.h iio: adc: ad7292: Add explicit include for of.h ACPICA: Update version to 20230331 ACPICA: add os specific support for Zephyr RTOS ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array ACPICA: acpi_madt_oem_data: Fix flexible array member definition ...
2023-04-25Merge tag 'thermal-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These mostly continue to prepare the thermal control subsystem for using unified representation of trip points, which includes cleanups, code refactoring and similar and update several drivers (for other reasons), which includes new hardware support. Specifics: - Add a thermal zone 'devdata' accessor and modify several drivers to use it (Daniel Lezcano) - Prevent drivers from using the 'device' internal thermal zone structure field directly (Daniel Lezcano) - Clean up the hwmon thermal driver (Daniel Lezcano) - Add thermal zone id accessor and thermal zone type accessor and prevent drivers from using thermal zone fields directly (Daniel Lezcano) - Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano) - Add lower bound check for sysfs input to the x86_pkg_temp_thermal Intel thermal driver (Zhang Rui) - Add more thermal zone device encapsulation: prevent setting structure field directly, access the sensor device instead the thermal zone's device for trace, relocate the traces in drivers/thermal (Daniel Lezcano) - Use the generic trip point for the i.MX and remove the get_trip_temp ops (Daniel Lezcano) - Use the devm_platform_ioremap_resource() in the Hisilicon driver (Yang Li) - Remove R-Car H3 ES1.* handling as public has only access to the ES2 version and the upstream support for the ES1 has been shutdown (Wolfram Sang) - Add a delay after initializing the bank in order to let the time to the hardware to initialze itself before reading the temperature (Amjad Ouled-Ameur) - Add MT8365 support (Amjad Ouled-Ameur) - Preparational cleanup and DT bindings for RK3588 support (Sebastian Reichel) - Add driver support for RK3588 (Finley Xiao) - Use devm_reset_control_array_get_exclusive() for the Rockchip driver (Ye Xingchen) - Detect power gated thermal zones and return -EAGAIN when reading the temperature (Mikko Perttunen) - Remove thermal_bind_params structure as it is unused (Zhang Rui) - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob Herring) - Update the power allocator documentation according to the thermal trace relocation (Lukas Bulwahn) - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor (Chen-Yu Tsai) - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen) - Add AP domain support to LVTS thermal controllers for mt8195 (Balsam CHIHI) - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano) - Make thermal_of_zone_[un]register() private to the thermal OF code (Daniel Lezcano) - Create a private copy of the thermal zone device parameters structure when registering a thermal zone (Daniel Lezcano) - Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui) - Revert recent message adjustment in thermal_hwmon (Rafael Wysocki) - Use of_property_present() for testing DT property presence in thermal control code (Rob Herring) - Clean up thermal_list_lock locking in the thermal core (Rafael Wysocki) - Add DLVR support for RFIM control in the int340x Intel thermal driver (Srinivas Pandruvada)" * tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) thermal: intel: int340x: Add DLVR support for RFIM control thermal/core: Alloc-copy-free the thermal zone parameters structure thermal/of: Unexport unused OF functions thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195 dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195 thermal: amlogic: Use dev_err_probe() thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement dt-bindings: thermal: Drop unneeded quotes thermal/core: Remove thermal_bind_params structure thermal/drivers/tegra-bpmp: Handle offline zones thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive() dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver thermal/drivers/rockchip: Support dynamic sized sensor array thermal/drivers/rockchip: Simplify channel id logic thermal/drivers/rockchip: Use dev_err_probe thermal/drivers/rockchip: Simplify clock logic thermal/drivers/rockchip: Simplify getting match data ...
2023-04-24Merge branches 'acpi-bus', 'acpi-video' and 'acpi-misc'Rafael J. Wysocki
Merge ACPI bus type driver changes, ACPI backlight driver updates and a series of cleanups related to of.h for 6.4-rc1: - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki). - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede). - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring). * acpi-bus: ACPI: bus: Ensure that notify handlers are not running after removal ACPI: bus: Add missing braces to acpi_sb_notify() * acpi-video: ACPI: video: Remove desktops without backlight DMI quirks ACPI: video: Remove register_backlight_delay module option and code * acpi-misc: ACPI: Replace irqdomain.h include with struct declarations fpga: lattice-sysconfig-spi: Add explicit include for of.h tpm: atmel: Add explicit include for of.h virtio-mmio: Add explicit include for of.h pata: ixp4xx: Add explicit include for of.h ata: pata_macio: Add explicit include of irqdomain.h serial: 8250_tegra: Add explicit include for of.h net: rfkill-gpio: Add explicit include for of.h staging: iio: resolver: ad2s1210: Add explicit include for of.h iio: adc: ad7292: Add explicit include for of.h
2023-04-14Merge back Intel thermal control material for 6.4-rc1.Rafael J. Wysocki
2023-04-13iio: adc: palmas: don't alter event config on suspend/resumePatrik Dahlström
The event config is controlled through the IIO events subsystem and device wakeup is controlled by /sys/devices/.../power/wakeup. Let's keep those two knobs independent. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-10-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: add support for iio threshold eventsPatrik Dahlström
The palmas gpadc block has support for monitoring up to 2 ADC channels and issue an interrupt if they reach past a set threshold. This change hooks into the IIO events system and exposes to userspace the ability to configure these threshold values for each channel, but only allow up to 2 such thresholds to be enabled at any given time. Trying to enable a third channel will result in an error. Userspace is expected to input calibrated, as opposed to raw, values as threshold. However, it is not enough to do the opposite of what is done when converting the other way around. To account for tolerances in the ADC, the calculated raw threshold should be adjusted based on the ADC specifications for the device. These specifications include the integral nonlinearity (INL), offset, and gain error. To adjust the high threshold, use the following equation: (calibrated value + INL) * Gain error + offset = maximum value [1] Likewise, use the following equation for the low threshold: (calibrated value - INL) * Gain error - offset = minimum value The gain error is a combination of gain error, as listed in the datasheet, and gain error drift due to temperature and supply. The exact values for these specifications vary between palmas devices. This patch sets the values found in TWL6035, TWL6037 datasheet. [1] TI Application Report, SLIA087A, Guide to Using the GPADC in TPS65903x, TPS65917-Q1, TPS65919-Q1, and TPS65916 Devices. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-9-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: always reset events on unloadPatrik Dahlström
This prevents leaving the adc in freerunning mode when removing the driver. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-8-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: move eventX_enable into palmas_adc_eventPatrik Dahlström
It just makes more sense to have all information regarding adc events in one place. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-7-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: use iio_event_direction for threshold polarityPatrik Dahlström
Instead of having high_threshold > 0 as an indicator for upper threshold event and lower threshold event otherwise, use enum iio_event_direction instead. This is hopefully less ambiguous. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-6-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: replace "wakeup" with "event"Patrik Dahlström
The palmas gpadc block has support for monitoring up to 2 ADC channels and issue an interrupt if they reach past a set threshold. This is currently used to wake up the system from sleep, but the functionality is more generic than that. As such, change the naming of functions and variables to refer to it as events instead, except during suspend and resume where wakeup still make sense. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-5-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: remove adc_wakeupX_dataPatrik Dahlström
It does not seem to be used by anyone and later patches in this series are made simpler by first removing this. There is now a lot of dead code that cannot be reached, until later patches revive it. Arguably, this is preferred over removing the code only to add it again. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-4-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-13iio: adc: palmas: Take probe fully device managed.Jonathan Cameron
Review of a recent fix highlighted that this driver could be trivially converted to be entirely devm managed. That fix should be applied to resolve the fix in a fashion easy to back port even though this change removes the relevant code. [1] https://patchwork.kernel.org/project/linux-iio/patch/20230313205029.1881745-1-risca@dalakolonin.se/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Patrik Dahlström <risca@dalakolonin.se> Reviewed-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230318163039.56115-1-jic23@kernel.org
2023-04-13iio: imu: lsm6dsx: Add ACPI mount matrix retrievalJonathan Cameron
DSDT ROTM method seen in the wild with SMO8B30 _HID. Making assumption it is similar to that used for bmc150 plus information from Darrell that the rotation is out by 90 degrees at boot. Method (ROTM, 0, NotSerialized) { Name (RBUF, Package (0x03) { "0 -1 0", "1 0 0", "0 0 1" }) Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */ } Reported-by: Darrell Kavanagh <darrell.kavanagh@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Darrell Kavanagh <darrell.kavanagh@gmail.org> Link: https://lore.kernel.org/r/20230130201018.981024-3-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-12iio: imu: lsm6dsx: Support SMO8B30 ACPI ID for LSM6DS3TR-CJonathan Cameron
ID seen in the wild and it is a valid ST micro ID. An offset of 1 for the device ID enum is needed when adding support for retrieving the ID from device_get_match_data() to allow detection of NULL pointer and fallback to i2c_device_id table. DSDT chunk cropped for relevant parts. Scope (_SB.PCI0.I2C5) { Device (DEV) { Name (_HID, EisaId ("SMO8B30")) // _HID: Hardware ID Name (_CID, EisaId ("SMO8B30")) // _CID: Compatible ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x006A, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C5", 0x00, ResourceConsumer, , Exclusive, ) }) Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_._CRS.RBUF */ } Method (ROTM, 0, NotSerialized) { Name (RBUF, Package (0x03) { "0 -1 0", "1 0 0", "0 0 1" }) Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */ } ... Link: https://lore.kernel.org/all/20230129182441.082f29d0@jic23-huawei/ Reported-by: Darrell Kavanagh <darrell.kavanagh@gmail.com> Tested-by: Darrell Kavanagh <darrell.kavanagh@gmail.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20230130201018.981024-2-jic23@kernel.org
2023-04-12Merge tag 'iio-for-6.4a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanups for the 6.4 cycle. New device support * bosch,bmp280 - Add support for BMP580 - includes significant refactoring and general driver cleanup + support for non-volatile memory for trimming and config parameters. * rohm BU27034 - New driver for this 3 channel ambient light sensor. - New support library for devices where both integration time and amplifier gain are configurable. In these cases a scale change may require changing bother underlying values. This library module provides code to help with this. * st,accel - Add support for IIS328DQ (ID only as compatible wtih LIS331DL) * st,lsm6dsx - Add support for ASM330LHB automotive MEMS sensor. * ti,ads1100, ads1000 - New driver for these 16 bit ADCs. * ti,tmp117 - Add support for older tmp116 device. Includes some general driver cleanup. Staging driver drops * adi,ade7854 - Driver was a very long way from compliant with IIO infrastructure and ABI. If anyone wants a non staging version of this driver they are better off starting from scratch. Hence drop it and the associated meter.h header. Features * adi,ad7441r - Add DT binding to set sink current for digital input. * semtech,sx9324,9360 - Support older register mapping from firmware designed for windows. Core improvements. * Move iio_trigger_poll() docs to next to the implementation and add a note on expected caller context. * Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so as to use more standard / common terminology. * Improve main ABI docs references to offset and scale for raw values by making them consistent and clear. Cleanups and minor fixes: * adi,ad5592r - Add GPIO names - useful for debug. * adi,ad7441r - Fix current input, loop powered mode configuration setup. * adi,adis16475 - Fix wrong commented value for minimum advised lower rate. * adi,admv1013 - Use devm_clk_get_enabled() to reduce boilerplate. * adi,ads1210 - Fix wrong bits for writing config register (late fix and has been broken a long time so not rushed upstream) * amlogic,meson-saradc - Improve cleanup in error handling if BL30 handshake fails. * apex-embedded,stx104 - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle retries. - Add local mutex to close various races. - Use define U16_MAX rather than value for limit. - Improve code readability with minor reorganization. * atmel,ad91-sama5d2 - Drop trivial dead code. * kionix,kx022a - Drop unused structure element. * linear,ltc2983 - Reorganize bindings doc to enable unevaluatedProperties to be set in one place for all child nodes. - Make binding for adi,custom-thermocouple accept signed values. * maxim,max44000 - Add OF Device matching (of_match_table was not correctly set). * maxim,max5522 - Missing static * measurement-computing,cio-dac - Fix wrong part name in comments. - Migrate to regmap. - Improve includes by replacing bitops.h with more direct bits.h * qcom,pm8xxx-xoadc - Remove a check that can never fail. * renesas,rcar-gyroadc - DT binding documentation improvements. - Tidy up an unused warning with __maybe_unused. * semtech,sx_common - Drop docs for a structure element that doesn't exist. * semtech,sx9500 - Drop ACPI_PTR() and of_match_ptr() protections that just complicate the code / block some firmware registration types that would otherwise work. * sensiron,sps30 - Comment formatting tidy up. * st,sensors - Drop duplicate text in DT binding. * st,stm32-adc - Add some missing static markings. * ti,ads1100 - Use correct return code in dev_err_probe() call. * x-powers,axp20x_adc - precursor series to simplify addition of AXP192. - General code cleanup / minor refactoring for better readabilty of code. - Switch from boolean value to mask for adc_en2 field to avoid hard coding a mask that will be different in AXP192 * tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits) MAINTAINERS: Add ROHM BU27034 iio: light: ROHM BU27034 Ambient Light Sensor dt-bindings: iio: light: Support ROHM BU27034 MAINTAINERS: Add IIO gain-time-scale helpers iio: light: Add gain-time-scale helpers doc: Make sysfs-bus-iio doc more exact iio: dac: set variable max5522_channels storage-class-specifier to static dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll iio: addac: stx104: Migrate to the regmap API iio: addac: stx104: Improve indentation in stx104_write_raw() iio: addac: stx104: Use define rather than hardcoded limit for write val iio: addac: stx104: Fix race condition when converting analog-to-digital iio: addac: stx104: Fix race condition for stx104_write_raw() dt-bindings: iio: st-sensors: Fix repeated text staging: iio: resolver: ads1210: fix config mode iio: adc: ti-ads1100: fix error code in probe() iio: accel: add support for IIS328DQ variant dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer ...
2023-04-10iio: light: ROHM BU27034 Ambient Light SensorMatti Vaittinen
ROHM BU27034 is an ambient light sensor with 3 channels and 3 photo diodes capable of detecting a very wide range of illuminance. Typical application is adjusting LCD and backlight power of TVs and mobile phones. Add initial support for the ROHM BU27034 ambient light sensor. NOTE: - Driver exposes 4 channels. One IIO_LIGHT channel providing the calculated lux values based on measured data from diodes #0 and #1. In addition, 3 IIO_INTENSITY channels are emitting the raw register data from all diodes for more intense user-space computations. - Sensor has GAIN values that can be adjusted from 1x to 4096x. - Sensor has adjustible measurement times of 5, 55, 100, 200 and 400 mS. Driver does not support 5 mS which has special limitations. - Driver exposes standard 'scale' adjustment which is implemented by: 1) Trying to adjust only the GAIN 2) If GAIN adjustment alone can't provide requested scale, adjusting both the time and the gain is attempted. - Driver exposes writable INT_TIME property that can be used for adjusting the measurement time. Time adjustment will also cause the driver to try to adjust the GAIN so that the overall scale is kept as close to the original as possible. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/2a7efb6f335da5526fbe34b95137c5e45db5c5d3.1680263956.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-10iio: light: Add gain-time-scale helpersMatti Vaittinen
Some light sensors can adjust both the HW-gain and integration time. There are cases where adjusting the integration time has similar impact to the scale of the reported values as gain setting has. IIO users do typically expect to handle scale by a single writable 'scale' entry. Driver should then adjust the gain/time accordingly. It however is difficult for a driver to know whether it should change gain or integration time to meet the requested scale. Usually it is preferred to have longer integration time which usually improves accuracy, but there may be use-cases where long measurement times can be an issue. Thus it can be preferable to allow also changing the integration time - but mitigate the scale impact by also changing the gain underneath. Eg, if integration time change doubles the measured values, the driver can reduce the HW-gain to half. The theory of the computations of gain-time-scale is simple. However, some people (undersigned) got that implemented wrong for more than once. Add some gain-time-scale helpers in order to not dublicate errors in all drivers needing these computations. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/268d418e7cffcdaa2ece6738478bbc57692c213e.1680263956.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-10iio: dac: set variable max5522_channels storage-class-specifier to staticTom Rix
smatch reports drivers/iio/dac/max5522.c:55:28: warning: symbol 'max5522_channels' was not declared. Should it be static? This variable is only used in one file so it should be static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230404013828.1914523-1-trix@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-10iio: addac: stx104: Use regmap_read_poll_timeout() for conversion pollWilliam Breathitt Gray
ADC sample captures take a certain amount of time to complete after initiated; this conversion time range can be anywhere from 5 microseconds to 53.68 seconds depending on the configuration of the Analog Input Frame Timer register. When the conversion is in progress, the ADC Status register CNV bit is high. Call regmap_read_poll_timeout() to poll until the ADC conversion is completed (or timeout if more than 53.68 seconds passes). Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/9ef433f107afd1d4dcd2d97ef0e932d7045c2bbd.1680790580.git.william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-10iio: addac: stx104: Migrate to the regmap APIWilliam Breathitt Gray
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. In addition, to improve code organization in stx104_probe(), the devm_iio_device_register() call is moved above GPIO configuration in order to keep relevant code closer together. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/0bcdfc4738cc019fb2ff83f61eb46a3488bc166d.1680790580.git.william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-10iio: addac: stx104: Improve indentation in stx104_write_raw()William Breathitt Gray
By bailing out early if chan->output is false for the IIO_CHAN_INFO_RAW, indentation can be decreased by a tab and code readability improved. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/487d17da9e2612f3e6b2bd1c3def2fa1b955db9b.1680790580.git.william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-10iio: addac: stx104: Use define rather than hardcoded limit for write valWilliam Breathitt Gray
The DAC register is 16 bits wide, so the value passed by write_raw() should be checked against that limit. Rather than hardcoding the 16-bit maximum value limit, use a define to improve readability and make the intention of the code clearer. The explicit cast is also avoided by instead explicitly checking for negative values. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/4c9f4f1b4a270d133be70c82a091351b531b5e3e.1680790580.git.william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-10iio: addac: stx104: Fix race condition when converting analog-to-digitalWilliam Breathitt Gray
The ADC conversion procedure requires several device I/O operations performed in a particular sequence. If stx104_read_raw() is called concurrently, the ADC conversion procedure could be clobbered. Prevent such a race condition by utilizing a mutex. Fixes: 4075a283ae83 ("iio: stx104: Add IIO support for the ADC channels") Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/2ae5e40eed5006ca735e4c12181a9ff5ced65547.1680790580.git.william.gray@linaro.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-10iio: addac: stx104: Fix race condition for stx104_write_raw()William Breathitt Gray
The priv->chan_out_states array and actual DAC value can become mismatched if stx104_write_raw() is called concurrently. Prevent such a race condition by utilizing a mutex. Fixes: 97a445dad37a ("iio: Add IIO support for the DAC on the Apex Embedded Systems STX104") Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/c95c9a77fcef36b2a052282146950f23bbc1ebdc.1680790580.git.william.gray@linaro.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-10iio: adc: ti-ads1100: fix error code in probe()Dan Carpenter
This code has a copy and paste bug so it accidentally returns "PTR_ERR(data->reg_vdd)" which is a valid pointer cast to int. It should return "ret" instead. Fixes: 541880542f2b ("iio: adc: Add TI ADS1100 and ADS1000") Signed-off-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/36fa2aeb-f392-4793-8b38-ae15514033c8@kili.mountain Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-08iio: light: tsl2772: fix reading proximity-diodes from device treeBrian Masney
tsl2772_read_prox_diodes() will correctly parse the properties from device tree to determine which proximity diode(s) to read from, however it didn't actually set this value on the struct tsl2772_settings. Let's go ahead and fix that. Reported-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/lkml/20230327120823.1369700-1-trix@redhat.com/ Fixes: 94cd1113aaa0 ("iio: tsl2772: add support for reading proximity led settings from device tree") Signed-off-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/r/20230404011455.339454-1-bmasney@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-06iio: adc: ad7292: Add explicit include for of.hRob Herring
With linux/acpi.h no longer implicitly including of.h, add an explicit include of of.h to fix the following error: drivers/iio/adc/ad7292.c:307:9: error: implicit declaration of function 'for_each_available_child_of_node'; did you mean 'fwnode_for_each_available_child_node'? [-Werror=implicit-function-declaration] Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-04-01iio: dac: ad5755: Add missing fwnode_handle_put()Liang He
In ad5755_parse_fw(), we should add fwnode_handle_put() when break out of the iteration device_for_each_child_node() as it will automatically increase and decrease the refcounter. Fixes: 3ac27afefd5d ("iio:dac:ad5755: Switch to generic firmware properties and drop pdata") Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20230322035627.1856421-1-windhl@126.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-04-01iio: adc: at91-sama5d2_adc: fix an error code in at91_adc_allocate_trigger()Dan Carpenter
The at91_adc_allocate_trigger() function is supposed to return error pointers. Returning a NULL will cause an Oops. Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/5d728f9d-31d1-410d-a0b3-df6a63a2c8ba@kili.mountain Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-28Merge tag 'iio-fixes-for-6.3a' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: 1st set of IIO fixes for 6.3 Usual mixed bag: - core - output buffers Fix return of bytes written when only some succeed. Fix O_NONBLOCK handling to not block. - adi,ad7791 Fix IRQ type. Not confirmed to have any impact but good to correct it anyway - adi,adis16400 Missing CONFIG_CRC32 - capella,cm32181 Unregister 2nd I2C client if one is used. - cio-dac Fix bitdepth for range check on write. - linear,ltc2497 Fix a wrong shift of the LSB introduced when switching to be24 handling. - maxim,max11410 Fix handling of return code in read_poll_timeout() - qcom,spmi-adc Fix an accidental change of channel name to include the reg value from OF. - ti,palmas Fix a null dereference on remove due to wrong function used to get the drvdata. - ti,ads7950 Mark GPIO as can sleep. * tag 'iio-fixes-for-6.3a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chip iio: adc: palmas_gpadc: fix NULL dereference on rmmod iio: adc: max11410: fix read_poll_timeout() usage iio: dac: cio-dac: Fix max DAC write value check for 12-bit iio: light: cm32181: Unregister second I2C client if present iio: accel: kionix-kx022a: Get the timestamp from the driver's private data in the trigger_handler iio: adc: ad7791: fix IRQ flags iio: buffer: make sure O_NONBLOCK is respected iio: buffer: correctly return bytes written in output buffers iio: light: vcnl4000: Fix WARN_ON on uninitialized lock iio: adis16480: select CONFIG_CRC32 drivers: iio: adc: ltc2497: fix LSB shift iio: adc: qcom-spmi-adc5: Fix the channel name
2023-03-19iio: accel: add support for IIS328DQ variantStefan Wahren
Since the ST IIS328DQ accelerometer is compatible to the ST LIS331DL, just add the new compatible to the st_accel framework. Link: https://www.st.com/resource/en/datasheet/iis328dq.pdf Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com> Link: https://lore.kernel.org/r/20230317103323.7741-6-stefan.wahren@chargebyte.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-19iio: addac: stx104: Replace bitops.h header inclusion with bits.hWilliam Breathitt Gray
The <linux/bitops.h> header is included in the stx104 driver so that we can use the BIT() macro. This macro is actually defined in the <linux/bits.h> header, so replace the <linux/bitops.h> header inclusion with <linux/bits.h>. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/20230318185503.341914-1-william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: dac: cio-dac: Migrate to the regmap APIWilliam Breathitt Gray
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. Includes trivial header inclusion tidy up. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/20230311140218.74920-1-william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: adc: ti-ads7950: Set `can_sleep` flag for GPIO chipLars-Peter Clausen
The ads7950 uses a mutex as well as SPI transfers in its GPIO callbacks. This means these callbacks can sleep and the `can_sleep` flag should be set. Having the flag set will make sure that warnings are generated when calling any of the callbacks from a potentially non-sleeping context. Fixes: c97dce792dc8 ("iio: adc: ti-ads7950: add GPIO support") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: David Lechner <david@lechnology.com> Link: https://lore.kernel.org/r/20230312210933.2275376-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplifyUwe Kleine-König
Make use of devm_clk_get_enabled() to replace some code that effectively open codes this new function. To retain ordering move the request to a place that is executed later. This way the time of enable keeps the same. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230313185333.2776785-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: adc: palmas_gpadc: fix NULL dereference on rmmodPatrik Dahlström
Calling dev_to_iio_dev() on a platform device pointer is undefined and will make adc NULL. Signed-off-by: Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230313205029.1881745-1-risca@dalakolonin.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: adc: at91-sama5d2_adc: remove dead code in at91_adc_probe()Cheng Ziqiu
From the comment of platform_get_irq(), it only returns non-zero IRQ number and negative error number, other than zero. Fix this by removing the if condition. Signed-off-by: Cheng Ziqiu <chengziqiu@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230314070130.60581-1-chengziqiu@hust.edu.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: adc: qcom-pm8xxx-xoadc: Remove useless condition in ↵Kasumov Ruslan
pm8xxx_xoadc_parse_channel() The left side of the loop condition never becomes false. hwchan cannot be NULL, because it points to elements of the hw_channels array that takes one of 4 predefined values: pm8018_xoadc_channels, pm8038_xoadc_channels, pm8058_xoadc_channels, pm8921_xoadc_channels. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kasumov Ruslan <s02210418@gse.cs.msu.ru> Link: https://lore.kernel.org/r/20230315135114.22684-1-xhxgldhlpfy@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: adc: stm32-adc: set some stm32-adc.c variables storage-class-specifier ↵Tom Rix
to static smatch reports several warnings drivers/iio/adc/stm32-adc.c:2591:20: warning: symbol 'stm32_adc_min_ts_h7' was not declared. Should it be static? drivers/iio/adc/stm32-adc.c:2610:20: warning: symbol 'stm32_adc_min_ts_mp1' was not declared. Should it be static? drivers/iio/adc/stm32-adc.c:2630:20: warning: symbol 'stm32_adc_min_ts_mp13' was not declared. Should it be static? These variables are only used in stm32-adc.c, so they should be static Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230312161733.470617-1-trix@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: proximity: sx9500: Reference ACPI and OF ID dataKrzysztof Kozlowski
Always reference acpi_device_id and of_device_id tables, as they is little benefit of conditional compiling and OF table could be used also for ACPI matching via PRP0001. This fixes warning: drivers/iio/proximity/sx9500.c:1039:34: error: ‘sx9500_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312153429.371702-3-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: light: max44009: add missing OF device matchingKrzysztof Kozlowski
The driver currently matches only via i2c_device_id, but also has of_device_id table: drivers/iio/light/max44009.c:545:34: error: ‘max44009_of_match’ defined but not used [-Werror=unused-const-variable=] Fixes: 6aef699a7d7e ("iio: light: add driver for MAX44009") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230312153429.371702-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: imu: st_lsm6dsx: add support to ASM330LHBLorenzo Bianconi
Add support to STM ASM330LHB (acc + gyro) automotive Mems sensor. The ASM330LHB sensor can use ASM330LHH as fallback device since it implements all the ASM330LHB features currently implemented in st_lsm6dsx. Datasheet: https://www.st.com/resource/en/datasheet/asm330lhb.pdf Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/a1d675457da7aa9e979d8cabea410e942e015e71.1678100533.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: addac: ad74413r: fix Current Input, Loop Powered ModeRasmus Villemoes
Currently, the driver handles CH_FUNC_CURRENT_INPUT_LOOP_POWER and CH_FUNC_CURRENT_INPUT_EXT_POWER completely identically. But that's not correct. In order for CH_FUNC_CURRENT_INPUT_LOOP_POWER to work, two changes must be made: (1) expose access to the DAC_CODE_x register so that the intended output current can be set, i.e. expose the channel as both current output and current input, and (2) per the data sheet When selecting the current input loop powered function, tie the VIOUTN_x pin to ground via the on-chip 200 kΩ resistor by enabling the CH_200K_TO_GND bit in the ADC_CONFIGx registers. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20230301115511.849418-1-linux@rasmusvillemoes.dk Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: ad74413r: wire up support for drive-strength-microamp propertyRasmus Villemoes
Use the value specified in the channel configuration node to populate the DIN_SINK field of the DIN_CONFIGx register. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20230306094301.1357543-3-linux@rasmusvillemoes.dk Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: adc: max11410: fix read_poll_timeout() usageNuno Sá
Even though we are passing 'ret' as stop condition for read_poll_timeout(), that return code is still being ignored. The reason is that the poll will stop if the passed condition is true which will happen if the passed op() returns error. However, read_poll_timeout() returns 0 if the *complete* condition evaluates to true. Therefore, the error code returned by op() will be ignored. To fix this we need to check for both error codes: * The one returned by read_poll_timeout() which is either 0 or ETIMEDOUT. * The one returned by the passed op(). Fixes: a44ef7c46097 ("iio: adc: add max11410 adc driver") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Acked-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com> Link: https://lore.kernel.org/r/20230307095303.713251-1-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-12iio: adc: Add TI ADS1100 and ADS1000Mike Looijmans
The ADS1100 is a 16-bit ADC (at 8 samples per second). The ADS1000 is similar, but has a fixed data rate. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230307065535.7927-2-mike.looijmans@topic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: dac: cio-dac: Fix typo in comment listing supported devicesWilliam Breathitt Gray
This driver supports the CIO-DAC08 device and not "CIO-DAC06". Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/20230311002434.8761-1-william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-11iio: dac: cio-dac: Fix max DAC write value check for 12-bitWilliam Breathitt Gray
The CIO-DAC series of devices only supports DAC values up to 12-bit rather than 16-bit. Trying to write a 16-bit value results in only the lower 12 bits affecting the DAC output which is not what the user expects. Instead, adjust the DAC write value check to reject values larger than 12-bit so that they fail explicitly as invalid for the user. Fixes: 3b8df5fd526e ("iio: Add IIO support for the Measurement Computing CIO-DAC family") Cc: stable@vger.kernel.org Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/20230311002248.8548-1-william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-02-01 10:54:37 +0000