| Age | Commit message (Collapse) | Author |
|---|
|
Pull rdma updates from Jason Gunthorpe:
"Lighter that normal, but the now usual collection of driver fixes and
small improvements:
- Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp,
efa, cxgb4
- Update mlx4 to use the new umem APIs, avoiding direct use of
scatterlist
- Support ROCEv2 in erdma
- Remove various uncalled functions, constify bin_attribute
- Provide core infrastructure to catch netdev events and route them
to drivers, consolidating duplicated driver code
- Fix rare race condition crashes in mlx5 ODP flows"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (63 commits)
RDMA/mlx5: Fix implicit ODP use after free
RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error
RDMA/qib: Constify 'struct bin_attribute'
RDMA/hfi1: Constify 'struct bin_attribute'
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
RDMA/cxgb4: Notify rdma stack for IB_EVENT_QP_LAST_WQE_REACHED event
RDMA/bnxt_re: Allocate dev_attr information dynamically
RDMA/bnxt_re: Pass the context for ulp_irq_stop
RDMA/bnxt_re: Add support to handle DCB_CONFIG_CHANGE event
RDMA/bnxt_re: Query firmware defaults of CC params during probe
RDMA/bnxt_re: Add Async event handling support
bnxt_en: Add ULP call to notify async events
RDMA/mlx5: Fix indirect mkey ODP page count
MAINTAINERS: Update the bnxt_re maintainers
RDMA/hns: Clean up the legacy CONFIG_INFINIBAND_HNS
RDMA/rtrs: Add missing deinit() call
RDMA/efa: Align interrupt related fields to same type
RDMA/bnxt_re: Fix to drop reference to the mmap entry in case of error
RDMA/mlx5: Fix link status down event for MPV
RDMA/erdma: Support create_ah/destroy_ah in non-sleepable contexts
...
|
|
Prevent double queueing of implicit ODP mr destroy work by using
__xa_cmpxchg() to make sure this is the only time we are destroying this
specific mr.
Without this change, we could try to invalidate this mr twice, which in
turn could result in queuing a MR work destroy twice, and eventually the
second work could execute after the MR was freed due to the first work,
causing a user after free and trace below.
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 12178 at lib/refcount.c:28 refcount_warn_saturate+0x12b/0x130
Modules linked in: bonding ib_ipoib vfio_pci ip_gre geneve nf_tables ip6_gre gre ip6_tunnel tunnel6 ipip tunnel4 ib_umad rdma_ucm mlx5_vfio_pci vfio_pci_core vfio_iommu_type1 mlx5_ib vfio ib_uverbs mlx5_core iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 2 PID: 12178 Comm: kworker/u20:5 Not tainted 6.5.0-rc1_net_next_mlx5_58c644e #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events_unbound free_implicit_child_mr_work [mlx5_ib]
RIP: 0010:refcount_warn_saturate+0x12b/0x130
Code: 48 c7 c7 38 95 2a 82 c6 05 bc c6 fe 00 01 e8 0c 66 aa ff 0f 0b 5b c3 48 c7 c7 e0 94 2a 82 c6 05 a7 c6 fe 00 01 e8 f5 65 aa ff <0f> 0b 5b c3 90 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 8d 50 ff
RSP: 0018:ffff8881008e3e40 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027
RDX: ffff88852c91b5c8 RSI: 0000000000000001 RDI: ffff88852c91b5c0
RBP: ffff8881dacd4e00 R08: 00000000ffffffff R09: 0000000000000019
R10: 000000000000072e R11: 0000000063666572 R12: ffff88812bfd9e00
R13: ffff8881c792d200 R14: ffff88810011c005 R15: ffff8881002099c0
FS: 0000000000000000(0000) GS:ffff88852c900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5694b5e000 CR3: 00000001153f6003 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? refcount_warn_saturate+0x12b/0x130
free_implicit_child_mr_work+0x180/0x1b0 [mlx5_ib]
process_one_work+0x1cc/0x3c0
worker_thread+0x218/0x3c0
kthread+0xc6/0xf0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 5256edcb98a1 ("RDMA/mlx5: Rework implicit ODP destroy")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/r/c96b8645a81085abff739e6b06e286a350d1283d.1737274283.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This patch addresses a race condition for an ODP MR that can result in a
CQE with an error on the UMR QP.
During the __mlx5_ib_dereg_mr() flow, the following sequence of calls
occurs:
mlx5_revoke_mr()
mlx5r_umr_revoke_mr()
mlx5r_umr_post_send_wait()
At this point, the lkey is freed from the hardware's perspective.
However, concurrently, mlx5_ib_invalidate_range() might be triggered by
another task attempting to invalidate a range for the same freed lkey.
This task will:
- Acquire the umem_odp->umem_mutex lock.
- Call mlx5r_umr_update_xlt() on the UMR QP.
- Since the lkey has already been freed, this can lead to a CQE error,
causing the UMR QP to enter an error state [1].
To resolve this race condition, the umem_odp->umem_mutex lock is now also
acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke,
we set umem_odp->private which points to that MR to NULL, preventing any
further invalidation attempts on its lkey.
[1] From dmesg:
infiniband rocep8s0f0: dump_cqe:277:(pid 0): WC error: 6, Message: memory bind operation error
cqe_dump: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000030: 00 00 00 00 08 00 78 06 25 00 11 b9 00 0e dd d2
WARNING: CPU: 15 PID: 1506 at drivers/infiniband/hw/mlx5/umr.c:394 mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
Modules linked in: ip6table_mangle ip6table_natip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core
CPU: 15 UID: 0 PID: 1506 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1626
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
[..]
Call Trace:
<TASK>
mlx5r_umr_update_xlt+0x23c/0x3e0 [mlx5_ib]
mlx5_ib_invalidate_range+0x2e1/0x330 [mlx5_ib]
__mmu_notifier_invalidate_range_start+0x1e1/0x240
zap_page_range_single+0xf1/0x1a0
madvise_vma_behavior+0x677/0x6e0
do_madvise+0x1a2/0x4b0
__x64_sys_madvise+0x25/0x30
do_syscall_64+0x6b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/r/68a1e007c25b2b8fe5d625f238cc3b63e5341f77.1737290229.git.leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Artemy Kovalyov <artemyko@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Restrict the check for the number of pages handled during an ODP page
fault to direct mkeys.
Perform the check right after handling the page fault and don't
propagate the number of handled pages to callers.
Indirect mkeys and their associated direct mkeys can have different
start addresses. As a result, the calculation of the number of pages to
handle for an indirect mkey may not match the actual page fault
handling done on the direct mkey.
For example:
A 4K sized page fault on a KSM mkey that has a start address that is not
aligned to a page will result a calculation that assumes the number of
pages required to handle are 2.
While the underlying MTT might be aligned will require fetching only a
single page.
Thus, do the calculation and compare number of pages handled only per
direct mkey.
Fixes: db570d7deafb ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Artemy Kovalyov <artemyko@nvidia.com>
Link: https://patch.msgid.link/86c483d9e75ce8fe14e9ff85b62df72b779f8ab1.1736187990.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc6).
No conflicts.
Adjacent changes:
include/linux/if_vlan.h
f91a5b808938 ("af_packet: fix vlan_get_protocol_dgram() vs MSG_PEEK")
3f330db30638 ("net: reformat kdoc return statements")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Driver queries vport_cxt.num_plane and enables multiplane when it is
greater then 0, but some old FWs (versions from x.40.1000 till x.42.1000),
report vport_cxt.num_plane = 1 unexpectedly.
Fix it by querying num_plane only when HCA_CAP2.multiplane bit is set.
Fixes: 2a5db20fa532 ("RDMA/mlx5: Add support to multi-plane device and port")
Link: https://patch.msgid.link/r/1ef901acdf564716fcf550453cf5e94f343777ec.1734610916.git.leon@kernel.org
Cc: stable@vger.kernel.org
Reported-by: Francesco Poli <invernomuto@paranoici.org>
Closes: https://lore.kernel.org/all/nvs4i2v7o6vn6zhmtq4sgazy2hu5kiulukxcntdelggmznnl7h@so3oul6uwgbl/
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The commit below prevented MPV from unloading correctly due to blocking
the netdev down event, allow sending the event for MPV mode to maintain
proper unload flow.
Fixes: 379013776222 ("RDMA/mlx5: Handle link status event only for LAG device")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://patch.msgid.link/d7731478e456f61255af798a7fd4e64b006ddebb.1735567976.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The link status events of non-LAG devices are now handled in ib_core,
so only LAG device events need to be handled in driver.
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Currently mlx5_flow_destination includes counter_id which is assigned in
case we use flow counter on the flow steering rule. However, counter_id
is not enough data in case of using HW Steering. Thus, have mlx5_fc
object as part of mlx5_flow_destination instead of counter_id and assign
it where needed.
In case counter_id is received from user space, create a local counter
object to represent it.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241219175841.1094544-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current ODP counters represent the total number of pages
handled, but it is not enough to understand the effectiveness
of these operations.
Extend the ODP counters to include the number of times page fault
and invalidation events were handled.
Example for a single page fault handling 512 pages:
- page_fault: incremented by 512 (total pages)
- page_fault_handled: incremented by 1 (operation count)
The same example is applicable for page invalidation too.
Previous output:
$ rdma stat mr
dev rocep8s0f0 mrn 8 page_faults 27 page_invalidations 0 page_prefetch 29
New output:
$ rdma stat mr
dev rocep8s0f0 mrn 21 page_faults 512 page_faults_handled 1
page_invalidations 0 page_invalidations_handled 0 page_prefetch 51200
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/b18f29ed1392996ade66e9e6c45f018925253f6a.1733234165.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Different core device types such as PFs and VFs shouldn't be affiliated
together since they have different capabilities, fix that by enforcing
type check before doing the affiliation.
Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/88699500f690dff1c1852c1ddb71f8a1cc8b956e.1733233480.git.leonro@nvidia.com
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes,
CQ coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (51 commits)
RDMA/bnxt_re: Correct the sequence of device suspend
RDMA/bnxt_re: Use the default mode of congestion control
RDMA/bnxt_re: Support different traffic class
IB/cm: Rework sending DREQ when destroying a cm_id
IB/cm: Do not hold reference on cm_id unless needed
IB/cm: Explicitly mark if a response MAD is a retransmission
RDMA/mlx5: Move events notifier registration to be after device registration
RDMA/bnxt_re: Cache MSIx info to a local structure
RDMA/bnxt_re: Refurbish CQ to NQ hash calculation
RDMA/bnxt_re: Refactor NQ allocation
RDMA/bnxt_re: Fail probe early when not enough MSI-x vectors are reserved
RDMA/hns: Fix different dgids mapping to the same dip_idx
RDMA/bnxt_re: Add set_func_resources support for P5/P7 adapters
RDMA/bnxt_re: Enhance RoCE SRIOV resource configuration design
bnxt_en: Add support for RoCE sriov configuration
RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg()
RDMA/hns: Fix out-of-order issue of requester when setting FENCE
RDMA/nldev: Add IB device and net device rename events
RDMA/mlx5: Add implementation for ufile_hw_cleanup device operation
RDMA/core: Move ib_uverbs_file struct to uverbs_types.h
...
|
|
Move pkey change work initialization and cleanup from device resources
stage to notifier stage, since this is the stage which handles this work
events.
Fix a race between the device deregistration and pkey change work by moving
MLX5_IB_STAGE_DEVICE_NOTIFIER to be after MLX5_IB_STAGE_IB_REG in order to
ensure that the notifier is deregistered before the device during cleanup.
Which ensures there are no works that are being executed after the
device has already unregistered which can cause the panic below.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 630071 Comm: kworker/1:2 Kdump: loaded Tainted: G W OE --------- --- 5.14.0-162.6.1.el9_1.x86_64 #1
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090008 02/27/2023
Workqueue: events pkey_change_handler [mlx5_ib]
RIP: 0010:setup_qp+0x38/0x1f0 [mlx5_ib]
Code: ee 41 54 45 31 e4 55 89 f5 53 48 89 fb 48 83 ec 20 8b 77 08 65 48 8b 04 25 28 00 00 00 48 89 44 24 18 48 8b 07 48 8d 4c 24 16 <4c> 8b 38 49 8b 87 80 0b 00 00 4c 89 ff 48 8b 80 08 05 00 00 8b 40
RSP: 0018:ffffbcc54068be20 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff954054494128 RCX: ffffbcc54068be36
RDX: ffff954004934000 RSI: 0000000000000001 RDI: ffff954054494128
RBP: 0000000000000023 R08: ffff954001be2c20 R09: 0000000000000001
R10: ffff954001be2c20 R11: ffff9540260133c0 R12: 0000000000000000
R13: 0000000000000023 R14: 0000000000000000 R15: ffff9540ffcb0905
FS: 0000000000000000(0000) GS:ffff9540ffc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010625c001 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
mlx5_ib_gsi_pkey_change+0x20/0x40 [mlx5_ib]
process_one_work+0x1e8/0x3c0
worker_thread+0x50/0x3b0
? rescuer_thread+0x380/0x380
kthread+0x149/0x170
? set_kthread_struct+0x50/0x50
ret_from_fork+0x22/0x30
Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) mlx5_fwctl(OE) fwctl(OE) ib_uverbs(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlx_compat(OE) psample mlxfw(OE) tls knem(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache netfs qrtr rfkill sunrpc intel_rapl_msr intel_rapl_common rapl hv_balloon hv_utils i2c_piix4 pcspkr joydev fuse ext4 mbcache jbd2 sr_mod sd_mod cdrom t10_pi sg ata_generic pci_hyperv pci_hyperv_intf hyperv_drm drm_shmem_helper drm_kms_helper hv_storvsc syscopyarea hv_netvsc sysfillrect sysimgblt hid_hyperv fb_sys_fops scsi_transport_fc hyperv_keyboard drm ata_piix crct10dif_pclmul crc32_pclmul crc32c_intel libata ghash_clmulni_intel hv_vmbus serio_raw [last unloaded: ib_core]
CR2: 0000000000000000
---[ end trace f6f8be4eae12f7bc ]---
Fixes: 7722f47e71e5 ("IB/mlx5: Create GSI transmission QPs when P_Key table is changed")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/d271ceeff0c08431b3cbbbb3e2d416f09b6d1621.1731496944.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Implement the device API for ufile_hw_cleanup operation, which
iterates over the ufile uobjects lists, and attempts to destroy
DevX QPs, by issuing up to 8 commands in parallel.
This function is responsible only for cleaning the FW resources of the
QP, and doesn't necessarily cleanup all of its resources.
Hence the normal serialized cleanup flow is still executed after it
in __uverbs_cleanup_ufile() to cleanup the remaining resources and
handle the cleanup of SW objects.
In order to avoid double cleanup for the FW resources, new DevX flag
was added DEVX_OBJ_FLAGS_HW_FREED, which marks the object's FW resources
as already freed.
Since QP destruction is the most time-consuming operation in FW,
parallelizing it reduces the cleanup time of applications that use
DevX QPs.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/2f82675d0412542cba1c47a6b86f589521ae41e1.1730373303.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix a race condition when creating a lag bond in active backup
mode where after the bond creation the backup slave was
attached to the IB device, instead of the active slave.
This caused stale entries in the GID table, as the gid updating
mechanism relies on ib_device_get_netdev(), which would return
the backup slave.
Send an MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE
event when activating the lag, additionally to when modifying
the lag. This ensures that eventually the active netdevice is
stored in the bond IB device.
When handling this event remove the GIDs of the previously
attached netdevice in this port and rescan the GIDs of the
newly attached netdevice.
This ensures that eventually the active slave netdevice is
correctly stored in the IB device port. While there might be
a brief moment where the backup slave GIDs appear in the GID
table, it will eventually stabilize with the correct GIDs
(of the bond and the active slave).
Fixes: 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/91fc2cb24f63add266a528c1c702668a80416d9f.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Move dev_put() call to occur directly after the blocking
notifier, instead of within the event handler.
Fixes: 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/342ff94b3dcbb07da1c7dab862a73933d604b717.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
On a SMI device, set requested plane_num when querying PPCNT register
with the PortCounters Attribute group.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/828d57444a0a41042556bb0a4394ecf2fcaed639.1730368052.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Support QP with out-of-order (OOO) capabilities enabled.
This allows WRs on the receiver side of the QP to be consumed OOO,
permitting the sender side to transmit messages without guaranteeing
arrival order on the receiver side.
When enabled, the completion ordering of WRs remains in-order,
regardless of the Receive WRs consumption order.
RDMA Read and RDMA Atomic operations on the responder side continue to
be executed in-order, while the ordering of data placement for RDMA
Write and Send operations is not guaranteed.
Atomic operations larger than 8 bytes are currently not supported.
Therefore, when this feature is enabled, the created QP restricts its
atomic support to 8 bytes at most.
In addition, when querying the device, a new flag is returned in
response to indicate that the Kernel supports OOO QP.
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/06ac609a5f358c8fb0a090d22c61a2f9329d82e6.1725362773.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
After the cited commit below max_dest_rd_atomic and max_rd_atomic values
are being rounded down to the next power of 2. As opposed to the old
behavior and mlx4 driver where they used to be rounded up instead.
In order to stay consistent with older code and other drivers, revert to
using fls round function which rounds up to the next power of 2.
Fixes: f18e26af6aba ("RDMA/mlx5: Convert modify QP to use MLX5_SET macros")
Link: https://patch.msgid.link/r/d85515d6ef21a2fa8ef4c8293dce9b58df8a6297.1728550179.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The IB layer provides a common interface to store and get net
devices associated to an IB device port (ib_device_set_netdev()
and ib_device_get_netdev()).
Previously, mlx5_ib stored and managed the associated net devices
internally.
Replace internal net device management in mlx5_ib with
ib_device_set_netdev() when attaching/detaching a net device and
ib_device_get_netdev() when retrieving the net device.
Export ib_device_get_netdev().
For mlx5 representors/PFs/VFs and lag creation we replace the netdev
assignments with the IB set/get netdev functions.
In active-backup mode lag the active slave net device is stored in the
lag itself. To assure the net device stored in a lag bond IB device is
the active slave we implement the following:
- mlx5_core: when modifying the slave of a bond we send the internal driver event
MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE.
- mlx5_ib: when catching the event call ib_device_set_netdev()
This patch also ensures the correct IB events are sent in switchdev lag.
While at it, when in multiport eswitch mode, only a single IB device is
created for all ports. The said IB device will receive all netdev events
of its VFs once loaded, thus to avoid overwriting the mapping of PF IB
device to PF netdev, ignore NETDEV_REGISTER events if the ib device has
already been mapped to a netdev.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-6-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
phys_port_cnt of the IB device must be initialized before calling
ib_device_set_netdev().
Previously, phys_port_cnt was initialized in the mlx5_ib init function.
Remove this initialization to allow setting it separately, providing
the flexibility to call ib_device_set_netdev before registering the
IB device.
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-4-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Report the upper device's state as the RDMA port state only in RoCE LAG or
switchdev LAG.
Fixes: 27f9e0ccb6da ("net/mlx5: Lag, Add single RDMA device in multiport mode")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-3-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Check if RoCE LAG is active before calling the LAG layer for netdev.
This clarifies if LAG is active. No behavior changes with this patch.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-2-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Consider also the query_vuid cap before enabling the data_direct
functionality.
This may prevent a syndrome from the FW in case the query_vuid command
is not supported. (e.g. migratable VF)
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Gal Shalom <galshalom@nvidia.com>
Link: https://patch.msgid.link/274c4f6f1ac0b1078243dd296695a49dbe58e7d1.1725907637.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Implicit MRs in ODP memory scheme require allocating a private null mkey
and assigning the mkey and va differently in the KSM mkey.
The page faults are received on the null mkey so we also add storing the
null mkey in the odp_mkey xarray.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-8-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The memory scheme page fault event is a new approch in handling page fault
on mkeys using the on-demand-paging feature.
The major shift in handling the page fault in this scheme is that the HW
is taking responsibilty for parsing the faulted mkey instead of the
previous approach where the driver would read and parse the wqes and
query the mkeys to get to the direct mkey that we need to handle.
Therefore, the event we get from FW in this scheme will contain the
direct mkey and address we need to handle and require much less work
from driver.
Additionally, to optimize performance, the FW can generate the event on
a memory area that is larger than the faulted memory operation is
requiring, to 'prefetch' memory that is around it and will likely be
used soon.
Unlike previous types of page fault, the memory page scheme fault does
not always require a resume command after handling the page fault as the FW
can post multiple events on same mkey and will set the 'last' flag only on
the page fault that requires the resume command.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-7-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Split the search for the ODP mkey when handling an rdma type page fault to
a helper function, later to be used in other page fault types.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-6-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The new memory scheme page faults are requesting the driver to fetch
additinal pages to the faulted memory access.
This is done in order to prefetch pages before and after the area that
got the page fault, assuming this will reduce the total amount of page
faults.
The driver should ensure it handles only the pages that are within the
umem range.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-5-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add new fields to support the new memory scheme page fault and extend
the token field to u64 as in the new scheme the token is 48 bit.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-4-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Expose IFC bits to support the new memory scheme on demand paging.
Change the macro reading odp capabilities to be able to read from the
new IFC layout and align the code in upper layers to be compiled.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-3-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Protect the usage of the 6th bit with the relevant capability to ensure
we are using the new page sizes with FW that supports the bit extension.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909100504.29797-2-michaelgur@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Fix the cleanup of the temp cache entries that are dynamically created
in the MR cache.
The cleanup of the temp cache entries is currently scheduled only when a
new entry is created. Since in the cleanup of the entries only the mkeys
are destroyed and the cache entry stays in the cache, subsequent
registrations might reuse the entry and it will eventually be filled with
new mkeys without cleanup ever getting scheduled again.
On workloads that register and deregister MRs with a wide range of
properties we see the cache ends up holding many cache entries, each
holding the max number of mkeys that were ever used through it.
Additionally, as the cleanup work is scheduled to run over the whole
cache, any mkey that is returned to the cache after the cleanup was
scheduled will be held for less than the intended 30 seconds timeout.
Solve both issues by dropping the existing remove_ent_work and reusing
the existing per-entry work to also handle the temp entries cleanup.
Schedule the work to run with a 30 seconds delay every time we push an
mkey to a clean temp entry.
This ensures the cleanup runs on each entry only 30 seconds after the
first mkey was pushed to an empty entry.
As we have already been distinguishing between persistent and temp entries
when scheduling the cache_work_func, it is not being scheduled in any
other flows for the temp entries.
Another benefit from moving to a per-entry cleanup is we now not
required to hold the rb_tree mutex, thus enabling other flow to run
concurrently.
Fixes: dd1b913fb0d0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/e4fa4bb03bebf20dceae320f26816cd2dde23a26.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When searching the MR cache for suitable cache entries, don't use mkeys
larger than twice the size required for the MR.
This should ensure the usage of mkeys closer to the minimal required size
and reduce memory waste.
On driver init we create entries for mkeys with clear attributes and
powers of 2 sizes from 4 to the max supported size.
This solves the issue for anyone using mkeys that fit these
requirements.
In the use case where an MR is registered with different attributes,
like an access flag we can't UMR, we'll create a new cache entry to store
it upon dereg.
Without this fix, any later registration with same attributes and smaller
size will use the newly created cache entry and it's mkeys, disregarding
the memory waste of using mkeys larger than required.
For example, one worst-case scenario can be when registering and
deregistering a 1GB mkey with ATS enabled which will cause the creation of
a new cache entry to hold those type of mkeys. A user registering a 4k MR
with ATS will end up using the new cache entry and an mkey that can
support a 1GB MR, thus wasting x250k memory than actually needed in the HW.
Additionally, allow all small registration to use the smallest size
cache entry that is initialized on driver load even if size is larger
than twice the required size.
Fixes: 73d09b2fe833 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/8ba3a6e3748aace2026de8b83da03aba084f78f4.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
After an mkey is created, update the counter for pending mkeys before
reshceduling the work that is filling the cache.
Rescheduling the work with a full MR cache entry and a wrong 'pending'
counter will cause us to miss disabling the fill_to_high_water flag.
Thus leaving the cache full but with an indication that it's still
needs to be filled up to it's full size (2 * limit).
Next time an mkey will be taken from the cache, we'll unnecessarily
continue the process of filling the cache to it's full size.
Fixes: 57e7071683ef ("RDMA/mlx5: Implement mkeys management via LIFO queue")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/0f44f462ba22e45f72cb3d0ec6a748634086b8d0.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The canceling of dealyed work in clean_keys() is a leftover from years
back and was added to prevent races in the cleanup process of MR cache.
The cleanup process was rewritten a few years ago and the canceling of
delayed work and flushing of workqueue was added before the call to
clean_keys().
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/943d21f5a9dba7b98a3e1d531e3561ffe9745d71.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When creating kernel MRs, it is not definitive whether they will be used
for peer-to-peer transactions or for other usecases, since address
mapping is performed only after the MR is created.
Since peer-to-peer transactions benefit significantly from ATS
performance-wise, enable ATS on newly-allocated kernel MRs when
supported.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Gal Shalom <galshalom@nvidia.com>
Link: https://patch.msgid.link/fafd4c9f14cf438d2882d88649c2947e1d05d0b4.1725273403.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The cited commit moves the pd allocation from function
mlx5r_umr_resource_cleanup() to a new function mlx5r_umr_cleanup().
So the fix in commit [1] is broken. In error flow, will hit panic [2].
Fix it by checking pd pointer to avoid panic if it is NULL;
[1] RDMA/mlx5: Fix UMR cleanup on error flow of driver init
[2]
[ 347.567063] infiniband mlx5_0: Couldn't register device with driver model
[ 347.591382] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 347.593438] #PF: supervisor read access in kernel mode
[ 347.595176] #PF: error_code(0x0000) - not-present page
[ 347.596962] PGD 0 P4D 0
[ 347.601361] RIP: 0010:ib_dealloc_pd_user+0x12/0xc0 [ib_core]
[ 347.604171] RSP: 0018:ffff888106293b10 EFLAGS: 00010282
[ 347.604834] RAX: 0000000000000000 RBX: 000000000000000e RCX: 0000000000000000
[ 347.605672] RDX: ffff888106293ad0 RSI: 0000000000000000 RDI: 0000000000000000
[ 347.606529] RBP: 0000000000000000 R08: ffff888106293ae0 R09: ffff888106293ae0
[ 347.607379] R10: 0000000000000a06 R11: 0000000000000000 R12: 0000000000000000
[ 347.608224] R13: ffffffffa0704dc0 R14: 0000000000000001 R15: 0000000000000001
[ 347.609067] FS: 00007fdc720cd9c0(0000) GS:ffff88852c880000(0000) knlGS:0000000000000000
[ 347.610094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 347.610727] CR2: 0000000000000020 CR3: 0000000103012003 CR4: 0000000000370eb0
[ 347.611421] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 347.612113] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 347.612804] Call Trace:
[ 347.613130] <TASK>
[ 347.613417] ? __die+0x20/0x60
[ 347.613793] ? page_fault_oops+0x150/0x3e0
[ 347.614243] ? free_msg+0x68/0x80 [mlx5_core]
[ 347.614840] ? cmd_exec+0x48f/0x11d0 [mlx5_core]
[ 347.615359] ? exc_page_fault+0x74/0x130
[ 347.615808] ? asm_exc_page_fault+0x22/0x30
[ 347.616273] ? ib_dealloc_pd_user+0x12/0xc0 [ib_core]
[ 347.616801] mlx5r_umr_cleanup+0x23/0x90 [mlx5_ib]
[ 347.617365] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x36/0x40 [mlx5_ib]
[ 347.618025] __mlx5_ib_add+0x96/0xd0 [mlx5_ib]
[ 347.618539] mlx5r_probe+0xe9/0x310 [mlx5_ib]
[ 347.619032] ? kernfs_add_one+0x107/0x150
[ 347.619478] ? __mlx5_ib_add+0xd0/0xd0 [mlx5_ib]
[ 347.619984] auxiliary_bus_probe+0x3e/0x90
[ 347.620448] really_probe+0xc5/0x3a0
[ 347.620857] __driver_probe_device+0x80/0x160
[ 347.621325] driver_probe_device+0x1e/0x90
[ 347.621770] __driver_attach+0xec/0x1c0
[ 347.622213] ? __device_attach_driver+0x100/0x100
[ 347.622724] bus_for_each_dev+0x71/0xc0
[ 347.623151] bus_add_driver+0xed/0x240
[ 347.623570] driver_register+0x58/0x100
[ 347.623998] __auxiliary_driver_register+0x6a/0xc0
[ 347.624499] ? driver_register+0xae/0x100
[ 347.624940] ? 0xffffffffa0893000
[ 347.625329] mlx5_ib_init+0x16a/0x1e0 [mlx5_ib]
[ 347.625845] do_one_initcall+0x4a/0x2a0
[ 347.626273] ? gcov_event+0x2e2/0x3a0
[ 347.626706] do_init_module+0x8a/0x260
[ 347.627126] init_module_from_file+0x8b/0xd0
[ 347.627596] __x64_sys_finit_module+0x1ca/0x2f0
[ 347.628089] do_syscall_64+0x4c/0x100
Fixes: 638420115cc4 ("IB/mlx5: Create UMR QP just before first reg_mr occurs")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Link: https://patch.msgid.link/778c40c60287992da5d6ec92bb07b67f7bb5e6ef.1725273295.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Commit e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to
mlx5_ib_dereg_mr()") removed mlx5_ib_free_implicit_mr() but left
the declaration.
Commit d98995b4bf98 ("net/mlx5: Reimplement write combining test") left
mlx5_ib_test_wc().
Remove the unused declarations.
Link: https://patch.msgid.link/r/20240816101358.881247-1-yuehaibing@huawei.com
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Introduce the 'GET_DATA_DIRECT_SYSFS_PATH' ioctl to return the sysfs
path of the affiliated 'data direct' device for a given device.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/403745463e0ef52adbef681ff09aa6a29a756352.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add support for DMABUF MR registrations with Data-direct device.
Upon userspace calling to register a DMABUF MR with the data direct bit
set, the below algorithm will be followed.
1) Obtain a pinned DMABUF umem from the IB core using the user input
parameters (FD, offset, length) and the DMA PF device. The DMA PF
device is needed to allow the IOMMU to enable the DMA PF to access the
user buffer over PCI.
2) Create a KSM MKEY by setting its entries according to the user buffer
VA to IOVA mapping, with the MKEY being the data direct device-crossed
MKEY. This KSM MKEY is umrable and will be used as part of the MR cache.
The PD for creating it is the internal device 'data direct' kernel one.
3) Create a crossing MKEY that points to the KSM MKEY using the crossing
access mode.
4) Manage the KSM MKEY by adding it to a list of 'data direct' MKEYs
managed on the mlx5_ib device.
5) Return the crossing MKEY to the user, created with its supplied PD.
Upon DMA PF unbind flow, the driver will revoke the KSM entries.
The final deregistration will occur under the hood once the application
deregisters its MKEY.
Notes:
- This version supports only the PINNED UMEM mode, so there is no
dependency on ODP.
- The IOVA supplied by the application must be system page aligned due to
HW translations of KSM.
- The crossing MKEY will not be umrable or part of the MR cache, as we
cannot change its crossed (i.e. KSM) MKEY over UMR.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/1f99d8020ed540d9702b9e2252a145a439609ba6.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pass uverbs_attr_bundle as part of '.reg_user_mr_dmabuf' API instead of
udata.
This enables passing some new ioctl attributes to the drivers, as will
be introduced in the next patches for mlx5 driver.
Change the involved drivers accordingly.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/9a25b2fc02443f7c36c2d93499ae25252b6afd40.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add the NET device initialization flow to utilize the 'data
direct' device.
When a NET mlx5_ib device is capable of 'data direct', the following
sequence of actions will occur:
- Find its affiliated 'data direct' VUID via a firmware command.
- Create its own private PD and 'data direct' mkey.
- Register to be notified when its 'data direct' driver is probed or removed.
The DMA device of the affiliated 'data direct' device, including the
private PD and the 'data direct' mkey, will be used later during MR
registrations that request the data direct functionality.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/b11fa87b2a65bce4db8d40341bb6cee490fa4d06.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce the 'data direct' driver for a ConnectX-8 Data Direct device.
The 'data direct' driver functions as the affiliated DMA device for one
or more capable mlx5_ib devices. This DMA device, as the name suggests,
is used exclusively for DMA operations. It can be considered a DMA engine
managed by a PF/VF, lacking network capabilities and having minimal overall
capabilities.
Consequently, the DMA NIC PF will not be exposed to or directly used by
software applications. The driver will not have any direct interface or
interaction with the firmware (no command interface, no capabilities,
etc.). It will operate solely over PCI to enable its DMA functionality.
Registration and un-registration of the driver are handled as part of
the mlx5_ib initialization and exit processes, as the mlx5_ib devices
will effectively be its clients.
The driver will serve as the DMA device for accessing another PCI device
to achieve optimal performance (both on the same NUMA node, P2P access,
etc.).
Upon probing, it will read its VUID over PCI to handle mlx5_ib device
registrations with the same VUID.
Upon removal, it will notify its clients to allow them to clean up the
resources that were mmaped with its DMA device.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://patch.msgid.link/b77edecfd476c3f445da96ab6aef499ae47b2829.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In multiport mode, RDMA devices make it impossible for userspace to use
DEVX to discover vhca id values for ports beyond port 1. This patch
addresses the issue by exposing the vhca id of all ports.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://patch.msgid.link/41dea83aa51843aa4c067b4f73f28d64e51bd53c.1722331101.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes:
- Bug fixes and minor improvments in efa, irdma, mlx4, mlx5, rxe,
hf1, qib, ocrdma
- bnxt_re support for MSN, which is a new retransmit logic
- Initial mana support for RC qps
- Use after free bug and cleanups in iwcm
- Reduce resource usage in mlx5 when RDMA verbs features are not used
- New verb to drain shared recieve queues, similar to normal recieve
queues. This is necessary to allow ULPs a clean shutdown. Used in
the iscsi rdma target
- mlx5 support for more than 16 bits of doorbell indexes
- Doorbell moderation support for bnxt_re
- IB multi-plane support for mlx5
- New EFA adaptor PCI IDs
- RDMA_NAME_ASSIGN_TYPE_USER to hint to userspace that it shouldn't
rename the device
- A collection of hns bugs
- Fix long standing bug in bnxt_re with incorrect endian handling of
immediate data"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
IB/hfi1: Constify struct flag_table
RDMA/mana_ib: Set correct device into ib
bnxt_re: Fix imm_data endianness
RDMA: Fix netdev tracker in ib_device_set_netdev
RDMA/hns: Fix mbx timing out before CMD execution is completed
RDMA/hns: Fix insufficient extend DB for VFs.
RDMA/hns: Fix undifined behavior caused by invalid max_sge
RDMA/hns: Fix shift-out-bounds when max_inline_data is 0
RDMA/hns: Fix missing pagesize and alignment check in FRMR
RDMA/hns: Fix unmatch exception handling when init eq table fails
RDMA/hns: Fix soft lockup under heavy CEQE load
RDMA/hns: Check atomic wr length
RDMA/ocrdma: Don't inline statistics functions
RDMA/core: Introduce "name_assign_type" for an IB device
RDMA/qib: Fix truncation compilation warnings in qib_verbs.c
RDMA/qib: Fix truncation compilation warnings in qib_init.c
RDMA/efa: Add EFA 0xefa3 PCI ID
RDMA/mlx5: Support per-plane port IB counters by querying PPCNT register
net/mlx5: mlx5_ifc update for accessing ppcnt register of plane ports
RDMA/mlx5: Add plane index support when querying PTYS registers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
aux-sysfs-irqs
Shay Says:
==========
Introduce auxiliary bus IRQs sysfs
Today, PCI PFs and VFs, which are anchored on the PCI bus, display their
IRQ information in the <pci_device>/msi_irqs/<irq_num> sysfs files. PCI
subfunctions (SFs) are similar to PFs and VFs and these SFs are anchored
on the auxiliary bus. However, these PCI SFs lack such IRQ information
on the auxiliary bus, leaving users without visibility into which IRQs
are used by the SFs. This absence makes it impossible to debug
situations and to understand the source of interrupts/SFs for
performance tuning and debug.
Additionally, the SFs are multifunctional devices supporting RDMA,
network devices, clocks, and more, similar to their peer PCI PFs and
VFs. Therefore, it is desirable to have SFs' IRQ information available
at the bus/device level.
To overcome the above limitations, this short series extends the
auxiliary bus to display IRQ information in sysfs, similar to that of
PFs and VFs.
It adds an 'irqs' directory under the auxiliary device and includes an
<irq_num> sysfs file within it.
For example:
$ ls /sys/bus/auxiliary/devices/mlx5_core.sf.1/irqs/
50 51 52 53 54 55 56 57 58
Patch summary:
patch-1 adds auxiliary bus to support irqs used by auxiliary device
patch-2 mlx5 driver using exposing irqs for PCI SF devices via auxiliary
bus
==========
* tag 'aux-sysfs-irqs' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose SFs IRQs
driver core: auxiliary bus: show auxiliary device IRQs
RDMA/mlx5: Add Qcounters req_transport_retries_exceeded/req_rnr_retries_exceeded
net/mlx5: Reimplement write combining test
====================
Link: https://patch.msgid.link/20240711213140.256997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The name_assign_type indicates how the name is provided. Currently
these types are supported:
- RDMA_NAME_ASSIGN_TYPE_UNKNOWN: Unknown or not set;
- RDMA_NAME_ASSIGN_TYPE_USER: Name is provided by the user; The
user-created sub device, rxe and siw device has this type.
When filling nl device info, it is set in the new attribute
RDMA_NLDEV_ATTR_NAME_ASSIGN_TYPE. User-space tools like udev
"rdma_rename" could check this attribute to determine if this
device needs to be renamed or not.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/522591bef9a369cc8e5dcb77787e017bffee37fe.1719837610.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Supports per-plane port counters by querying PPCNT register with the
"extended port counters" group, as the query_vport_counter command
doesn't support plane ports.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/06ffb582d67159b7def4654c8272d3d6e8bd2f2f.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Support the new "plane_ind" field when querying port PTYS registers.
This is needed when querying the rate of a plane port.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/1f703c36306aa46917fcd88eadbb23b3e380d526.1718553901.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
