| Age | Commit message (Collapse) | Author |
|---|
|
Address handle is set for connected QP types such as RC and UC, and thus
can also be queried.
Since XRC QP types INI and TGT are connected, it should be possible to
query their address handle as well.
Until now it was not the case, and although the firmware supported it, the
driver allowed querying the address handle only for RC and UC.
Hence, we enable it now for INI and TGT QPs as well.
Link: https://lore.kernel.org/r/20201115121425.139833-3-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Address handle is set for connected QP types such as RC and UC, and thus
can also be queried.
Since XRC QP types INI and TGT are connected, it should be possible to
query their address handle as well.
Until now it was not the case, and although the firmware supported it, the
driver allowed querying the address handle only for RC and UC.
Hence, we enable it now for INI and TGT QPs as well.
Link: https://lore.kernel.org/r/20201115121425.139833-2-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When a memory window is bound to a memory region, the local write access
should be set for its mtpt table.
Fixes: c7c28191408b ("RDMA/hns: Add MW support for hip08")
Link: https://lore.kernel.org/r/1606386372-21094-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The maximum number of retransmission should be returned when querying QP,
not the value of retransmission counter.
Fixes: 99fcf82521d9 ("RDMA/hns: Fix the wrong value of rnr_retry when querying qp")
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1606382977-21431-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The SRQ capacity is got from the firmware, whose field should be ended at
bit 19.
Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1606382812-23636-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Two earlier bug fixes have created a security problem in the hfi1
driver. One fix aimed to solve an issue where current->mm was not valid
when closing the hfi1 cdev. It attempted to do this by saving a cached
value of the current->mm pointer at file open time. This is a problem if
another process with access to the FD calls in via write() or ioctl() to
pin pages via the hfi driver. The other fix tried to solve a use after
free by taking a reference on the mm.
To fix this correctly we use the existing cached value of the mm in the
mmu notifier. Now we can check in the insert, evict, etc. routines that
current->mm matched what the notifier was registered for. If not, then
don't allow access. The register of the mmu notifier will save the mm
pointer.
Since in do_exit() the exit_mm() is called before exit_files(), which
would call our close routine a reference is needed on the mm. We rely on
the mmgrab done by the registration of the notifier, whereas before it was
explicit. The mmu notifier deregistration happens when the user context is
torn down, the creation of which triggered the registration.
Also of note is we do not do any explicit work to protect the interval
tree notifier. It doesn't seem that this is going to be needed since we
aren't actually doing anything with current->mm. The interval tree
notifier stuff still has a FIXME noted from a previous commit that will be
addressed in a follow on patch.
Cc: <stable@vger.kernel.org>
Fixes: e0cf75deab81 ("IB/hfi1: Fix mm_struct use after free")
Fixes: 3faa3d9a308e ("IB/hfi1: Make use of mm consistent")
Link: https://lore.kernel.org/r/20201125210112.104301.51331.stgit@awfm-01.aw.intel.com
Suggested-by: Jann Horn <jannh@google.com>
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
i40iw_mmap manipulates the vma->vm_pgoff to differentiate a push page mmap
vs a doorbell mmap, and uses it to compute the pfn in remap_pfn_range
without any validation. This is vulnerable to an mmap exploit as described
in: https://lore.kernel.org/r/20201119093523.7588-1-zhudi21@huawei.com
The push feature is disabled in the driver currently and therefore no push
mmaps are issued from user-space. The feature does not work as expected in
the x722 product.
Remove the push module parameter and all VMA attribute manipulations for
this feature in i40iw_mmap. Update i40iw_mmap to only allow DB user
mmapings at offset = 0. Check vm_pgoff for zero and if the mmaps are bound
to a single page.
Cc: <stable@kernel.org>
Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Link: https://lore.kernel.org/r/20201125005616.1800-2-shiraz.saleem@intel.com
Reported-by: Di Zhu <zhudi21@huawei.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add a group of flags to control the 'struct hns_roce_buf' allocation
flow, this is used to support the caller running in atomic context.
Link: https://lore.kernel.org/r/1605347916-15964-1-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Link: https://lore.kernel.org/r/20201121095127.1335228-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The ops structs are never modified. Make them const to allow the compiler
to put them in read-only memory.
Link: https://lore.kernel.org/r/20201121002529.89148-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
We return 'err' in the error branch, but this variable may be set as zero
by the above code. Fix it by setting 'err' as a negative value before we
goto the error label.
Fixes: 74c2174e7be5 ("IB uverbs: add mthca user CQ support")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/1605837422-42724-1-git-send-email-wangxiongfeng2@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Before create CQ, make sure that the requested number of CQEs is in the
supported range.
Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Link: https://lore.kernel.org/r/20201108132007.67537-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding the new pseudo-keyword fallthrough; instead of
letting the code fall through to the next case.
Link: https://lore.kernel.org/r/2b0c87362bc86f6adfe56a5a6685837b71022bbf.1605896059.git.gustavoars@kernel.org
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://lore.kernel.org/r/8d7cf00ec3a4b27a895534e02077c2c9ed8a5f8e.1605896059.git.gustavoars@kernel.org
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of just letting the code
fall through to the next case.
Link: https://lore.kernel.org/r/0153716933e01608d46155941c447d011c59c1e4.1605896059.git.gustavoars@kernel.org
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://lore.kernel.org/r/13cc2fe2cf8a71a778dbb3d996b07f5e5d04fd40.1605896059.git.gustavoars@kernel.org
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
From https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
The rc RDMA branch is needed due to dependencies on the next patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Some of the SRQ types are created using a WQ, and the WQ requires a
different parameter set to mlx5_umem_find_best_quantized_pgoff() as it has
a 5 bit page_offset.
Add the umem to the mlx5_srq_attr and defer computing the PAS data until
the code has figured out what kind of mailbox to use. Compute the PAS
directly from the umem for each of the four unique mailbox types.
This also avoids allocating memory to store the user PAS, instead it is
written directly to the mailbox as in most other cases.
Fixes: 01949d0109ee ("net/mlx5_core: Enable XRCs and SRQs when using ISSI > 0")
Link: https://lore.kernel.org/r/20201115114311.136250-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since devx uses the new rdma_for_each_block() to fill the PAS it can also
use ib_umem_find_best_pgsz().
However, the umem constructionin devx is complicated, the umem must still
respect all the HW limits such as page_offset_quantized and the IOVA
alignment.
Since we don't know what the user intends to use the umem for we have to
limit it to PAGE_SIZE.
There are users trying to mix umem's with mkeys so this makes them work
reliably, at least for an identity IOVA, by ensuring the IOVA matches the
selected page size.
Last user of mlx5_ib_get_buf_offset() so it can also be removed.
Fixes: aeae94579caf ("IB/mlx5: Add DEVX support for memory registration")
Link: https://lore.kernel.org/r/20201115114311.136250-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This fixes a bug where the page_offset was not being considered when
building a CQ. The HW specification says it 'must be zero', so use
a variant of mlx5_umem_find_best_quantized_pgoff() with a 0 pgoff_bitmask
to force this result.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20201115114311.136250-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Delete custom logic in the QP in favor of more general variant.
Link: https://lore.kernel.org/r/20201115114311.136250-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The RQ WQ created when making a raw ethernet QP copies the PAS list from
a dummy QPC command created earlier in the flow. The WQC and QPC PAS lists
are not fully compatible as the page_offset is a different size.
Create the RQ WQ's PAS list directly and do not try to copy it from
another command structure.
Like the prior patch, this also means that badly aligned buffers were not
correctly rejected.
Link: https://lore.kernel.org/r/20201115114311.136250-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This fixes a subtle bug, the WQ mailbox has only 5 bits to describe the
page_offset, while mlx5_ib_get_buf_offset() is hard wired to only work
with 6 bit page_offsets.
Thus it did not properly reject badly aligned buffers.
Fixes: 79b20a6c3014 ("IB/mlx5: Add receive Work Queue verbs")
Fixes: 0fb2ed66a14c ("IB/mlx5: Add create and destroy functionality for Raw Packet QP")
Link: https://lore.kernel.org/r/20201115114311.136250-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
SRQ uses a quantized and scaled page_offset, which is another variation of
ib_umem_find_best_pgsz(). Add mlx5_umem_find_best_quantized_pgoff() to
perform this calculation for each mailbox. A macro shows how the
calculation is directly connected to the mailbox format.
This new routine replaces the limited mlx5_ib_cont_pages() and
mlx5_ib_get_buf_offset() pairing which would reject valid configurations
rather than adjust the page_size to make it work.
In turn this is much more aggressive about choosing large page sizes for
these objects and when THP is enabled it will now often find a single page
solution.
Link: https://lore.kernel.org/r/20201115114311.136250-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Drivers now expose two callbacks for address handle creation, one for
uverbs and one for kverbs. EFA only supports uverbs so the .create_ah
assignment can be removed. Fix the core code caller to check the proper
function pointer.
Link: https://lore.kernel.org/r/20201115103404.48829-3-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The 200G device has a new device ID 0xA228, add it to the PCI table.
Link: https://lore.kernel.org/r/1605187184-26079-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 4730f4a6c6b2 ("IB/hfi1: Activate the dummy netdev")
Link: https://lore.kernel.org/r/1605249747-17942-1-git-send-email-zhangchangzhong@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use netdev->tstats instead of a member of hfi1_ipoib_dev_priv for storing
a pointer to the per-cpu counters. This allows us to use core
functionality for statistics handling.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A return statement is omitted after getting HEM table, then the newly
allocated pointer will be freed directly, which will cause a calltrace
when the driver was removed.
Fixes: d6d91e46210f ("RDMA/hns: Add support for configuring GMV table")
Link: https://lore.kernel.org/r/1605180582-46504-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix missing kfree in pvrdma_register_device() when failure from
ib_device_set_netdev().
Fixes: 4b38da75e089 ("RDMA/drivers: Convert easy drivers to use ib_device_set_netdev()")
Link: https://lore.kernel.org/r/20201111032202.17925-1-miaoqinglang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
gcc points out a suspicious mixing of enum types in a function that
converts from MTHCA_OPCODE_* values to IB_WC_* values:
drivers/infiniband/hw/mthca/mthca_cq.c: In function 'mthca_poll_one':
drivers/infiniband/hw/mthca/mthca_cq.c:607:21: warning: implicit conversion from 'enum <anonymous>' to 'enum ib_wc_opcode' [-Wenum-conversion]
607 | entry->opcode = MTHCA_OPCODE_INVALID;
Nothing seems to ever check for MTHCA_OPCODE_INVALID again, no idea if
this is meaningful, but it seems harmless as it deals with an invalid
input.
Remove MTHCA_OPCODE_INVALID and set the ib_wc_opcode to 0xFF, which is
still bogus, but at least doesn't make compiler warnings.
Fixes: 2a4443a69934 ("[PATCH] IB/mthca: fill in opcode field for send completions")
Link: https://lore.kernel.org/r/20201026211311.3887003-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
All FD object destroy implementations return 0, so declare this callback
void.
Link: https://lore.kernel.org/r/20201104144556.3809085-3-leon@kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Remove the ib_is_destroyable_retryable() concept.
The idea here was to allow the drivers to forcibly clean the HW object
even if they otherwise didn't want to (eg because of usecnt). This was an
attempt to clean up in a world where drivers were not allowed to fail HW
object destruction.
Now that we are going back to allowing HW objects to fail destroy this
doesn't make sense. Instead if a uobject's HW object can't be destroyed it
is left on the uobject list and it is up to uverbs_destroy_ufile_hw() to
clean it. Multiple passes over the uobject list allow hidden dependencies
to be resolved. If that fails the HW driver is broken, throw a WARN_ON and
leak the HW object memory.
All the other tricky failure paths (eg on creation error unwind) have
already been updated to this new model.
Link: https://lore.kernel.org/r/20201104144556.3809085-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The pvrdma_port_attr structure is ABI toward the hypervisor, changing it
breaks the ability to report the speed properly. Revert the change to u16.
Fixes: 376ceb31ff87 ("RDMA: Fix link active_speed size")
Link: https://lore.kernel.org/r/20201102225437.26557-1-aditr@vmware.com
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The IBTA specification has new speed - NDR. That speed supports signaling
rate of 100Gb. mlx5 IB driver translates link modes reported by ConnectX
device to IB speed and width. Added translation of new 100Gb, 200Gb and
400Gb link modes to NDR IB type and width of x1, x2 or x4 respectively.
Link: https://lore.kernel.org/r/20201026133738.1340432-3-leon@kernel.org
Signed-off-by: Meir Lichtinger <meirl@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Now that all the PAS arrays or UMR XLT's for mkcs are filled using
rdma_for_each_block() we can use the common ib_umem_find_best_pgsz()
algorithm.
Link: https://lore.kernel.org/r/20201026132314.1336717-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Mixing these together is just a mess, make a dedicated version,
mlx5_ib_update_mr_pas(), which directly loads the whole MTT for a non-ODP
MR.
The split out version can trivially use a simple loop with
rdma_for_each_block() which allows using the core code to compute the MR
pages and avoids seeking in the SGL list after each chunk as the
__mlx5_ib_populate_pas() call required.
Significantly speeds loading large MTTs.
Link: https://lore.kernel.org/r/20201026132314.1336717-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The memory allocation is quite complicated, and makes this function hard
to understand. Refactor things so that a function call sets up the WR, SG,
DMA mapping and buffer, further splitting that into buffer and DMA/wr.
This also slightly changes the buffer allocation logic to try an order 0
page allocation (with OOM warnings on) before going to the emergency page.
Link: https://lore.kernel.org/r/20201026132314.1336717-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This is the only user, so remove the wrappers.
Link: https://lore.kernel.org/r/20201026132314.1336717-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This routine converts the umem SGL into a list of fixed pages for DMA,
which is exactly what rdma_umem_for_each_dma_block() is for, use the
common code directly.
Link: https://lore.kernel.org/r/20201026132314.1336717-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Most callers don't need this, and the few that do can get it as
ib_umem_num_pages(umem).
Link: https://lore.kernel.org/r/20201026131936.1335664-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This is the same as ib_umem_num_dma_blocks(umem, 1UL << page_shift), have
the callers compute it directly.
Link: https://lore.kernel.org/r/20201026131936.1335664-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Only alloc_mr_from_cache() needs order and can trivially compute it, so
lift it to the one call site and remove the NULL arguments.
Link: https://lore.kernel.org/r/20201026131936.1335664-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For the user MR path, instead of calling this after getting the umem, call
it as part of creating the struct mlx5_ib_mr and distill its output to a
single page_shift stored inside the mr.
This avoids passing around the tuple of its output. Based on the umem and
page_shift, the output arguments can be computed using:
count == ib_umem_num_pages(mr->umem)
shift == mr->page_shift
ncont == ib_umem_num_dma_blocks(mr->umem, 1 << mr->page_shift)
order == order_base_2(ncont)
And since mr->page_shift == umem_odp->page_shift then ncont ==
ib_umem_num_dma_blocks() == ib_umem_odp_num_pages() for ODP umems.
Link: https://lore.kernel.org/r/20201026131936.1335664-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This is the same value as ib_umem_num_pages(mr->umem), use that instead.
Link: https://lore.kernel.org/r/20201026131936.1335664-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
reg_pages should always contain mr->npage since when the mr is finally
de-reg'd it is always subtracted out.
If there were any error exits then mlx5_ib_rereg_user_mr() would leave the
reg_pages adjusted and this will cause it to be double subtracted
eventually.
The manipulation of reg_pages is inherently connected to the umem, so lift
it out of set_mr_fields() and only adjust it around creating/destroying a
umem.
reg_pages is only used for diagnostics in sysfs.
Fixes: 7d0cc6edcc70 ("IB/mlx5: Add MR cache for large UMR regions")
Link: https://lore.kernel.org/r/20201026131936.1335664-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The is only ever set to non-zero if the MR is from the cache, and if it is
cached then the order is in cached_ent->order.
Make it clearer that use_umr_mtt_update() only returns true for cached MRs
and remove the redundant data.
Link: https://lore.kernel.org/r/20201026131936.1335664-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Manual changes for sysfs_emit as cocci scripts can't easily convert them.
Link: https://lore.kernel.org/r/ecde7791467cddb570c6f6d2c908ffbab9145cac.1602122880.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Make changes to use sysfs_emit in the RDMA code as cocci scripts can not
be written to handle _all_ the possible variants of various sprintf family
uses in sysfs show functions.
While there, make the code more legible and update its style to be more
like the typical kernel styles.
Miscellanea:
o Use intermediate pointers for dereferences
o Add and use string lookup functions
o return early when any intermediate call fails so normal return is
at the bottom of the function
o mlx4/mcg.c:sysfs_show_group: use scnprintf to format intermediate strings
Link: https://lore.kernel.org/r/f5c9e4c9d8dafca1b7b70bd597ee7f8f219c31c8.1602122880.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
