summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2015-02-18RDMA/ocrdma: Help gcc generate better code for ocrdma_srq_toggle_bitRasmus Villemoes
gcc emits a surprising amount of code in order to flip a bit. One would think that a single instruction is enough. $ scripts/bloat-o-meter /tmp/ocrdma_verbs.o drivers/infiniband/hw/ocrdma/ocrdma_verbs.o add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-142 (-142) function old new delta ocrdma_post_srq_recv 498 460 -38 ocrdma_poll_cq 2010 1962 -48 ocrdma_discard_cqes 495 439 -56 All three calls of ocrdma_srq_toggle_bit happen within spinlocks, so saving a few useless instructions might be worthwhile. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Update the ocrdma module version stringMitesh Ahuja
Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: set vlan present bit for user AHDevesh Sharma
For the AH that describs a VLAN interface details, vlan present bit needs to be set during posting a WQE. This patch adds the code to allow it happening. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: remove reference of ocrdma_dev out of ocrdma_qp structureMitesh Ahuja
Use get_ocrdma_dev(ocrdma_qp->ibqp.device) function to access ocrdma device pointer. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Add support for interrupt moderationMitesh Ahuja
Add support for interrupt moderation for ocrdma device. Thresholds for high interrupt rates are static values derived based on experimental results. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Honor return value of ocrdma_resolve_dmacDevesh Sharma
Check for return value for ocrdma_resolve_dmac while setting AV params. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Allow expansion of the SQ CQEs via buddy CQ expansion of the QPSelvin Xavier
If the SQ and RQ of the QP in error state uses separate CQs, traverse the list of QPs using each CQs and invoke the buddy CQ handler for both SQ and RQ. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Discontinue support of RDMA-READ-WITH-INVALIDATEDevesh Sharma
Remove support for RDMA-READ-WITH-INVALIDATE from ocrdma driver. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Host crash on destroying device resourcesMitesh Ahuja
1. Cleanup sequence in ocrdma_remove(). The device should be unregistered from IB stack before any device specific cleanup. 2. Always return success in the resource destroy path. In case destroy command returns error, IB stack will trigger cleanup again while closing the uverbs device causing kernel panic BUG_ON(). Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Report correct state in ibv_query_qpPadmanabh Ratnakar
Fix ocrdma_query_qp to refelect correct qp state based on FW. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Debugfs enhancments for ocrdma driverSelvin Xavier
1. Add statistics counters for error cqes. 2. Add file ("reset_stats") to reset rdma stats in Debugfs. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Report correct count of interrupt vectors while registering ↵Devesh Sharma
ocrdma device Fix ocrdma_register_device to initialize correct number of interrupt vectors in device pointer. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Move PD resource management to driver.Mitesh Ahuja
Move PD allocation and deallocation from firmware to driver. At driver load time all the PDs will be requested from firmware and their management will be handled by driver to reduce mailbox commands overhead at runtime. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Increase the GID table size.Mitesh Ahuja
Increase the GID table size from 8 to 16 enteries. Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-18RDMA/ocrdma: Add support for IB stack compliant stats in sysfs.Mitesh Ahuja
Add the following per-port sysfs traffic counters for RoCE: port_xmit_packets port_rcv_packets port_rcv_data port_xmit_data Signed-off-by: Mitesh Ahuja <mitesh.ahuja@emulex.com> Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/core: Properly handle registration of on-demand paging MRs after deregHaggai Eran
When the last on-demand paging MR is released the notifier count is left non-zero so that concurrent page faults will have to abort. If a new MR is then registered, the counter is reset. However, the decision is made to put the new MR in the list waiting for the notifier count to reach zero, before the counter is reset. An invalidation or another MR registration can release the MR to handle page faults, but without such an event the MR can wait forever. The patch fixes this issue by adding a check whether the MR is the first on-demand paging MR when deciding whether it is ready to handle page faults. If it is the first MR, we know that there are no mmu notifiers running in parallel to the registration. Fixes: 882214e2b128 ("IB/core: Implement support for MMU notifiers regarding on demand paging regions") Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx5: Update the dev in reg_createMajd Dibbiny
When we create an MR using reg_create, the mlx5_ib_dev pointer is not updated on the new MR. This results in a kernel panics for ODP MRs while handling page faults, when the mlx5_ib_update_mtt function uses the invalid device pointer. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx4: In mlx4_ib_demux_cm, print out GUID in host-endian orderJack Morgenstein
If a GUID is not found, the 64-bit GUID printed in the message log warning should converted to host-endian order for printing. Found by Doug Ledford and Hal Rosenstock. Fix suggested by Hal. Signed-off-by: Hal Rosenstock <hal@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx4: Bug fixes in mlx4_ib_resize_cqMajd Dibbiny
1. Before the entries alignment, we need to check that the entries doesn't exceed the device's max cqe. 2. After the alignment, we need to make sure that the aligned number doesn't exceed the max cqes+1. The additional cqe is used to denote that the resizing operation has completed. 3. If the users asks to resize the CQ with entries less than the oustanding cqes we should fail instead of returning 0. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx4: Fix memory leak in __mlx4_ib_modify_qpMajd Dibbiny
In case handle_eth_ud_smac_index fails, we need to free the allocated resources. Fixes: 2f5bb473681b ("mlx4: Add ref counting to port MAC table for RoCE") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/core: Fix deadlock on uverbs modify_qp error flowMoshe Lazer
The deadlock occurs in __uverbs_modify_qp: we take a lock (idr_read_qp) and in case of failure in ib_resolve_eth_l2_attrs we don't release it (put_qp_read). Fix that. Fixes: ed4c54e5b4ba ("IB/core: Resolve Ethernet L2 addresses when modifying QP") Signed-off-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17Merge branch 'debugfs_automount' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull debugfs patches from Al Viro: "debugfs patches, mostly to make it possible for something like tracefs to be transparently automounted on given directory in debugfs. New primitive in there is debugfs_create_automount(name, parent, func, arg), which creates a directory and makes its ->d_automount() return func(arg). Another missing primitive was debugfs_create_file_size() - open-coded in quite a few places. Dave's patch adds it and converts the open-code instances to calling it" * 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: debugfs: Provide a file creation function that also takes an initial size new primitive: debugfs_create_automount() debugfs: split end_creating() into success and failure cases debugfs: take mode-dependent parts of debugfs_get_inode() into callers fold debugfs_mknod() into callers fold debugfs_create() into caller fold debugfs_mkdir() into caller debugfs_mknod(): get rid useless arguments fold debugfs_link() into caller debugfs: kill __create_file() debugfs: split the beginning and the end of __create_file() off debugfs_{mkdir,create,link}(): get rid of redundant argument
2015-02-17IB/core: When marshaling ucma path from user-space, clear unused fieldsIlya Nelkenbaum
When marshaling a user path to the kernel struct ib_sa_path, we need to zero smac and dmac and set the vlan id to the "no vlan" value. This is to ensure that Ethernet attributes are not used with InfiniBand QPs. Fixes: dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures") Signed-off-by: Ilya Nelkenbaum <ilyan@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/iser: Release the iscsi endpoint if ep_disconnect wasn't calledAriel Nahum
In some cases, we might reach the iser connection termination without ep_disconnect being invoked (for example if user-space daemon doesn't exists. In this case, we need to free the iscsi endpoint when we remove the iser connection. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/iser: Fix memory regions possible leakSagi Grimberg
When teardown process starts during live IO, we need to keep the memory regions pool (frmr/fmr) until all in-flight tasks are properly released, since each task may return a memory region to the pool. In order to do this, we pass a destroy flag to iser_free_ib_conn_res to indicate we can destroy the device and the memory regions pool. iser_conn_release will pass it as true and also DEVICE_REMOVAL event (we need to let the device to properly remove). Also, Since we conditionally call iser_free_rx_descriptors, remove the extra check on iser_conn->rx_descs. Fixes: 5426b1711fd0 ("IB/iser: Collapse cleanup and disconnect handlers") Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/qib: Fix sizeof checkpatch warningsMike Marciniszyn
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/qib: Replace rcu_assign_pointer() with RCU_INIT_POINTER() in qib_keys.cAndreea-Cristina Bernat
The uses of "rcu_assign_pointer()" are NULLing out the pointers. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) [Derived from http://marc.info/?l=linux-rdma&m=140836519219236&w=2] Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/qib: Replace rcu_assign_pointer() with RCU_INIT_POINTER() in qib_qp.cAndreea-Cristina Bernat
According to RCU_INIT_POINTER()'s block comment 3.a, it can be used if "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. "3. The referenced data structure has already been exposed to readers either at compile time or via rcu_assign_pointer() -and- a. You have not made -any- reader-visible changes to this structure since then". These cases fulfill the conditions above because between the rcu_dereference_protected() call and the rcu_assign_pointer() call there is no update of that value. Therefore, this patch makes the replacement. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., ( rtnl_dereference(...) | rcu_dereference_protected(...) ) ) [consolidated from http://marc.info/?l=linux-rdma&m=140836578119485&w=2 and http://marc.info/?l=linux-rdma&m=140906361403047&w=2] Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17IB/mlx5: Fix error code in get_port_caps()Dan Carpenter
The current code returns success when kmalloc() fails. It should return an error code, -ENOMEM. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-17debugfs: Provide a file creation function that also takes an initial sizeDavid Howells
Provide a file creation function that also takes an initial size so that the caller doesn't have to set i_size, thus meaning that we don't have to call deal with ->d_inode in the callers. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-16IB/qib: Add support for the new QMH7360 cardVinit Agnihotri
Add support to recognize another board variation named QMH7360. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-16IB/qib: Do not write EEPROMMitko Haralanov
This changeset removes all the code that allows the driver to write to the EEPROM and update the recorded error counters and power on hours. These two stats are unused and writing them exposes a timing risk which could leave the EEPROM in a bad state preventing further normal operation of the HCA. Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-16IB/mlx4: Fix wrong usage of IPv4 protocol for multicast attach/detachOr Gerlitz
The MLX4_PROT_IB_IPV4 protocol should only be used with RoCEv2 and such. Removing this wrong usage allows to run multicast applications over RoCE. Fixes: d487ee77740c ("IB/mlx4: Use IBoE (RoCE) IP based GIDs in the port GID table") Reported-by: Carol Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-13IB/iser: Use correct dma direction when unmapping SGsRoi Dayan
We always unmap SGs with the same direction instead of unmapping with the direction the mapping was done, fix that. Fixes: 9a8b08fad2ef ("IB/iser: Generalize iser_unmap_task_data and [...]") Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-13IB/ipath: Remove unused function in ipath_wc_ppc64Rickard Strandqvist
Remove the function ipath_unordered_wc() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-13RDMA/cxgb4: Serialize CQ event upcalls with CQ destructionHariprasad S
A race exists where the application can be destroying the CQ concurrently with a HW interrupt indicating a completion has been inserted into the CQ. This can cause an event notification upcall to the application after the CQ has been destroyed. The solution is to serialize looking up the CQ in the IDR table and referencing the CQ in c4iw_ev_handler() with removing the CQID from the IDR table and blocking until the refcnt reaches 0 in c4iw_destroy_cq(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-12iscsi/iser-target: Support multi-sequence sendtargets text responseSagi Grimberg
In case sendtargets response is larger than initiator MRDSL, we send a partial sendtargets response (setting F=0, C=1, TTT!=0xffffffff), accept a consecutive empty text message and send the rest of the payload. In case we are done, we set F=1, C=0, TTT=0xffffffff. We do that by storing the sendtargets response bytes done under the session. This patch also makes iscsit_find_cmd_from_itt public for isert. (Re-add cmd->maxcmdsn_inc and clear in iscsit_build_text_rsp - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) More iov_iter conversion work from Al Viro. [ The "crypto: switch af_alg_make_sg() to iov_iter" commit was wrong, and this pull actually adds an extra commit on top of the branch I'm pulling to fix that up, so that the pre-merge state is ok. - Linus ] 2) Various optimizations to the ipv4 forwarding information base trie lookup implementation. From Alexander Duyck. 3) Remove sock_iocb altogether, from CHristoph Hellwig. 4) Allow congestion control algorithm selection via routing metrics. From Daniel Borkmann. 5) Make ipv4 uncached route list per-cpu, from Eric Dumazet. 6) Handle rfs hash collisions more gracefully, also from Eric Dumazet. 7) Add xmit_more support to r8169, e1000, and e1000e drivers. From Florian Westphal. 8) Transparent Ethernet Bridging support for GRO, from Jesse Gross. 9) Add BPF packet actions to packet scheduler, from Jiri Pirko. 10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer. 11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman Kwok. 12) More sanely handle out-of-window dupacks, which can result in serious ACK storms. From Neal Cardwell. 13) Various rhashtable bug fixes and enhancements, from Herbert Xu, Patrick McHardy, and Thomas Graf. 14) Support xmit_more in be2net, from Sathya Perla. 15) Group Policy extensions for vxlan, from Thomas Graf. 16) Remove Checksum Offload support for vxlan, from Tom Herbert. 17) Like ipv4, support lockless transmit over ipv6 UDP sockets. From Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits) crypto: fix af_alg_make_sg() conversion to iov_iter ipv4: Namespecify TCP PMTU mechanism i40e: Fix for stats init function call in Rx setup tcp: don't include Fast Open option in SYN-ACK on pure SYN-data openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set ipv6: Make __ipv6_select_ident static ipv6: Fix fragment id assignment on LE arches. bridge: Fix inability to add non-vlan fdb entry net: Mellanox: Delete unnecessary checks before the function call "vunmap" cxgb4: Add support in cxgb4 to get expansion rom version via ethtool ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version net: dsa: Remove redundant phy_attach() IB/mlx4: Reset flow support for IB kernel ULPs IB/mlx4: Always use the correct port for mirrored multicast attachments net/bonding: Fix potential bad memory access during bonding events tipc: remove tipc_snprintf tipc: nl compat add noop and remove legacy nl framework tipc: convert legacy nl stats show to nl compat tipc: convert legacy nl net id get to nl compat tipc: convert legacy nl net id set to nl compat ...
2015-02-09IB/mlx4: Reset flow support for IB kernel ULPsYishai Hadas
The driver exposes interfaces that directly relate to HW state. Upon fatal error, consumers of these interfaces (ULPs) that rely on completion of all their posted work-request could hang, thereby introducing dependencies in shutdown order. To prevent this from happening, we manage the relevant resources (CQs, QPs) that are used by the device. Upon a fatal error, we now generate simulated completions for outstanding WQEs that were not completed at the time the HW was reset. It includes invoking the completion event handler for all involved CQs so that the ULPs will poll those CQs. When polled we return simulated CQEs with IB_WC_WR_FLUSH_ERR return code enabling ULPs to clean up their resources and not wait forever for completions upon receiving remove_one. The above change requires an extra check in the data path to make sure that when device is in error state, the simulated CQEs will be returned and no further WQEs will be posted. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09IB/mlx4: Always use the correct port for mirrored multicast attachmentsMoni Shoua
When attaching a QP to a multicast address in bonded mode, there was an assumption that the port of the QP must be #1. This assumption isn't the case under the flow which enables maximal usage of the physical ports. Fix it by always checking the port of the original flow and create the mirrored flow on the other port. Fixes: c6215745b66a ('IB/mlx4: Load balance ports in port aggregation mode') Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06Revert "IB/core: Add support for extended query device caps"Yann Droneaud
While commit 7e36ef8205ff ("IB/core: Temporarily disable ex_query_device uverb") is correct as it makes the extended QUERY_DEVICE uverb (which came as part of commit 5a77abf9a97a ("IB/core: Add support for extended query device caps") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support")) not available to userspace, it doesn't address the initial issue regarding ib_copy_to_udata() [1][2]. Additionally, further discussions around this new uverb seems to conclude it would require a different data structure than the one currently described in <rdma/ib_user_verbs.h> [3]. Both of these issues require a revert of the changes, so this patch partially reverts commit 8cdd312cfed7 ("IB/mlx5: Implement the ODP capability query verb") and commit 860f10a799c8 ("IB/core: Add flags for on demand paging support") and fully reverts commit 5a77abf9a97a ("IB/core: Add support for extended query device caps"). [1] "Re: [PATCH v3 06/17] IB/core: Add support for extended query device caps" http://mid.gmane.org/1418733236.2779.26.camel@opteya.com [2] "Re: [PATCH] IB/core: Temporarily disable ex_query_device uverb" http://mid.gmane.org/1423067503.3030.83.camel@opteya.com [3] "RE: [PATCH v1 1/5] IB/uverbs: ex_query_device: answer must not depend on request's comp_mask" http://mid.gmane.org/2807E5FD2F6FDA4886F6618EAC48510E0CC12C30@CRSMSX101.amr.corp.intel.com Cc: Eli Cohen <eli@mellanox.com> Cc: Haggai Eran <haggaie@mellanox.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Shachar Raindel <raindel@mellanox.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2015-02-05iser-target: Remove duplicate function namesRasmus Villemoes
The macro isert_dbg already ensures that __func__ is part of the output, so there's no reason to duplicate the function name in the format string itself. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04IB/mlx4: Load balance ports in port aggregation modeMoni Shoua
When the mlx4 IB (RoCE) device works in link aggregation mode, it exposes a single port to upper layers. Therefore, applications always set '1' in port_num attribute when modifying a QP or creating an address handle. To make sure that a node uses all available ports the mlx4 driver will override the port_num attribute with a round robin policy. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04IB/mlx4: Create mirror flows in port aggregation modeMoni Shoua
In port aggregation mode flows for port #1 (the only port) should be mirrored on port #2. This is because packets can arrive from either physical ports. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04IB/mlx4: Add port aggregation supportMoni Shoua
Register the interface with the mlx4 core driver with port aggregation support and check for port aggregation mode when the 'add' function is called. In this mode, only one physical port is reported to the upper layer (RoCE/IB core stack and ULPs). Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04IB/mlx4: Reuse mlx4_mac_to_u64()Moni Shoua
This function is implemented twice... get rid of one copy. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-04iser-target: Fix wrong allocation in the case of an empty text messageSagi Grimberg
if text message dlength is 0, don't allocate a buffer for it, pass NULL to iscsit_process_text_cmd. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-04iser-target: Use WQ_UNBOUND for completion workqueueSagi Grimberg
Bound workqueues might be too restrictive since they allow only a single core per session for processing completions. WQ_UNBOUND will allow bouncing to another CPU if the running CPU is currently busy. Luckily, our workqueues are NUMA aware and will first try to bounce within the same NUMA socket. My measurements with NULL backend devices show that there is no (noticeable) additional latency as a result of the change. I'd expect even to gain performance when working with fast devices that also allocate MSIX interrupt vectors. While we're at it, make it WQ_HIGHPRI since processing completions is really a high priority for performance. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reported-by: Moussa Ba <moussaba@micron.com> Signed-off-by: Moussa Ba <moussaba@micron.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-02-03Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband reverts from Roland Dreier: "Last minute InfiniBand/RDMA changes for 3.19: - Revert IPoIB driver back to 3.18 state. We had a number of fixes go into 3.19, but they introduced regressions. We tried to get everything fixed up but ran out of time, so we'll try again for 3.20. - Similarly, turn off the new "extended query port" verb. Late in the cycle we realized the ABI is not quite right, and rather than freeze something in a rush and make a mistake, we'll take a bit more time and get it right in 3.20" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/core: Temporarily disable ex_query_device uverb Revert "IPoIB: Consolidate rtnl_lock tasks in workqueue" Revert "IPoIB: Make the carrier_on_task race aware" Revert "IPoIB: fix MCAST_FLAG_BUSY usage" Revert "IPoIB: fix mcast_dev_flush/mcast_restart_task race" Revert "IPoIB: change init sequence ordering" Revert "IPoIB: Use dedicated workqueues per interface" Revert "IPoIB: Make ipoib_mcast_stop_thread flush the workqueue" Revert "IPoIB: No longer use flush as a parameter"
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-02-08 17:52:29 +0000