summaryrefslogtreecommitdiff
path: root/drivers/iommu/dmar.c
AgeCommit message (Collapse)Author
2014-11-18iommu/vt-d: Introduce helper function dmar_walk_resources()Jiang Liu
Introduce helper function dmar_walk_resources to walk resource entries in DMAR table and ACPI buffer object returned by ACPI _DSM method for IOMMU hot-plug. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-10-02Merge branches 'arm/exynos', 'arm/omap', 'arm/smmu', 'x86/vt-d', 'x86/amd' ↵Joerg Roedel
and 'core' into next Conflicts: drivers/iommu/arm-smmu.c
2014-10-02iommu/vt-d: Work around broken RMRR firmware entriesJoerg Roedel
The VT-d specification states that an RMRR entry in the DMAR table needs to specify the full path to the device. This is also how newer Linux kernels implement it. Unfortunatly older drivers just match for the target device and not the full path to the device, so that BIOS vendors implement that behavior into their BIOSes to make them work with older Linux kernels. But those RMRR entries break on newer Linux kernels. Work around this issue by adding a fall-back into the RMRR matching code to match those old RMRR entries too. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-10-02iommu/vt-d: Store bus information in RMRR PCI device pathJoerg Roedel
This will be used later to match broken RMRR entries. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-08-26iommu/vt-d: Check return value of acpi_bus_get_device()Joerg Roedel
Checking adev == NULL is not sufficient as acpi_bus_get_device() might not touch the value of this parameter in an error case, so check the return value directly. Fixes: ed40356b5fcf1ce28e026ab39c5b2b6939068b50 Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2014-08-19iommu: Replace rcu_assign_pointer() with RCU_INIT_POINTER()Andreea-Cristina Bernat
The use of "rcu_assign_pointer()" is NULLing out the pointer. According to RCU_INIT_POINTER()'s block comment: "1. This use of RCU_INIT_POINTER() is NULLing out the pointer" it is better to use it instead of rcu_assign_pointer() because it has a smaller overhead. The following Coccinelle semantic patch was used: @@ @@ - rcu_assign_pointer + RCU_INIT_POINTER (..., NULL) Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-08-06Merge tag 'pm+acpi-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18 commits) and system suspend/hibernation (9 commits). From the new code perspective, the ACPICA update brings ACPI 5.1 to the table, including a new device configuration object called _DSD (Device Specific Data) that will hopefully help us to operate device properties like Device Trees do (at least to some extent) and changes related to supporting ACPI on ARM. Apart from that we have hibernation changes making it use radix trees to store memory bitmaps which should speed up some operations carried out by it quite significantly. We also have some power management changes related to suspend-to-idle (the "freeze" sleep state) support and more preliminary changes needed to support ACPI on ARM (outside of ACPICA). The rest is fixes and cleanups pretty much everywhere. Specifics: - ACPICA update to upstream version 20140724. That includes ACPI 5.1 material (support for the _CCA and _DSD predefined names, changes related to the DMAR and PCCT tables and ARM support among other things) and cleanups related to using ACPICA's header files. A major part of it is related to acpidump and the core code used by that utility. Changes from Bob Moore, David E Box, Lv Zheng, Sascha Wildner, Tomasz Nowicki, Hanjun Guo. - Radix trees for memory bitmaps used by the hibernation core from Joerg Roedel. - Support for waking up the system from suspend-to-idle (also known as the "freeze" sleep state) using ACPI-based PCI wakeup signaling (Rafael J Wysocki). - Fixes for issues related to ACPI button events (Rafael J Wysocki). - New device ID for an ACPI-enumerated device included into the Wildcat Point PCH from Jie Yang. - ACPI video updates related to backlight handling from Hans de Goede and Linus Torvalds. - Preliminary changes needed to support ACPI on ARM from Hanjun Guo and Graeme Gregory. - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui. - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros (Rafael J Wysocki). - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J Wysocki. - Cleanups and improvements related to system suspend from Lan Tianyu, Randy Dunlap and Rafael J Wysocki. - ACPI battery cleanup from Wei Yongjun. - cpufreq core fixes from Viresh Kumar. - Elimination of a deadband effect from the cpufreq ondemand governor and intel_pstate driver cleanups from Stratos Karafotis. - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas Patocka. - Fix for the imx6 cpufreq driver from Anson Huang. - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep Tripathy and Mohammad Merajul Islam Molla. - Build fix for the big_little cpuidle driver from Sachin Kamat. - Configuration fix for the Operation Performance Points (OPP) framework from Mark Brown. - APM cleanup from Jean Delvare. - cpupower utility fixes and cleanups from Peter Senna Tschudin, Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger" * tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits) ACPI / LPSS: add LPSS device for Wildcat Point PCH ACPI / PNP: Replace faulty is_hex_digit() by isxdigit() ACPICA: Update version to 20140724. ACPICA: ACPI 5.1: Update for PCCT table changes. ACPICA/ARM: ACPI 5.1: Update for GTDT table changes. ACPICA/ARM: ACPI 5.1: Update for MADT changes. ACPICA/ARM: ACPI 5.1: Update for FADT changes. ACPICA: ACPI 5.1: Support for the _CCA predifined name. ACPICA: ACPI 5.1: New notify value for System Affinity Update. ACPICA: ACPI 5.1: Support for the _DSD predefined name. ACPICA: Debug object: Add current value of Timer() to debug line prefix. ACPICA: acpihelp: Add UUID support, restructure some existing files. ACPICA: Utilities: Fix local printf issue. ACPICA: Tables: Update for DMAR table changes. ACPICA: Remove some extraneous printf arguments. ACPICA: Update for comments/formatting. No functional changes. ACPICA: Disassembler: Add support for the ToUUID opererator (macro). ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro. ACPICA: Work around an ancient GCC bug. ACPI / processor: Make it possible to get local x2apic id via _MAT ...
2014-07-31ACPICA: Tables: Update for DMAR table changes.Bob Moore
Update table compiler and disassembler for new DMAR fields introduced in Sept. 2013. Note that Linux DMAR users need to be updated after applying this change. [zetalog: changing drivers/iommu/dmar.c accordingly] Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-23Merge branch 'core' into x86/vt-dJoerg Roedel
Conflicts: drivers/iommu/intel-iommu.c
2014-07-04iommu/vt-d: Make use of IOMMU sysfs supportAlex Williamson
Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-07-04iommu/vt-d: Clear the redundant assignment in dmar_enable_qiYijing Wang
__dmar_enable_qi() will initialize free_head,free_tail and free_cnt for q_inval. Remove the redundant initialization in dmar_enable_qi(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-16iommu: dmar: Provide arch specific irq allocationThomas Gleixner
ia64 and x86 share this driver. x86 is moving to a different irq allocation and ia64 keeps its private irq_create/destroy stuff. Use macros to redirect to one or the other. Yes, macros to avoid include hell. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: x86@kernel.org Cc: linux-ia64@vger.kernel.org Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20140507154336.372289825@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16iommu: smar: Fix return value check of create_irq()Thomas Gleixner
ia64 returns a negative error code when allocation fails andx86 returns 0. Make it handle both. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: x86@kernel.org Acked-by: Joerg Roedel <joro@8bytes.org> Cc: linux-ia64@vger.kernel.org Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20140507154336.178850165@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-14iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptorsJiang Liu
Commit "59ce0515cdaf iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens" introduces a bug, which fails to match PCI devices with DMAR device scope entries if PCI path array in the entry has more than one level. For example, it fails to handle [1D2h 0466 1] Device Scope Entry Type : 01 [1D3h 0467 1] Entry Length : 0A [1D4h 0468 2] Reserved : 0000 [1D6h 0470 1] Enumeration ID : 00 [1D7h 0471 1] PCI Bus Number : 00 [1D8h 0472 2] PCI Path : 1C,04 [1DAh 0474 2] PCI Path : 00,02 And cause DMA failure on HP DL980 as: DMAR:[fault reason 02] Present bit in context entry is clear dmar: DRHD: handling fault status reg 602 dmar: DMAR:[DMA Read] Request device [02:00.2] fault addr 7f61e000 Reported-and-tested-by: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-04-01iommu/vt-d: Fix error handling in ANDD processingDavid Woodhouse
If we failed to find an ACPI device to correspond to an ANDD record, we would fail to increment our pointer and would just process the same record over and over again, with predictable results. Turn it from a while() loop into a for() loop to let the 'continue' in the error paths work correctly. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-03-28iommu/vt-d: Only call dmar_acpi_dev_scope_init() if DRHD units presentDavid Woodhouse
As pointed out by Jörg and fixed in commit 11f1a7768 ("iommu/vt-d: Check for NULL pointer in dmar_acpi_dev_scope_init(), this code path can bizarrely get exercised even on AMD IOMMU systems with IRQ remapping enabled. In addition to the defensive check for NULL which Jörg added, let's also just avoid calling the function at all if there aren't an Intel IOMMU units in the system. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-03-25iommu/vt-d: Check for NULL pointer in dmar_acpi_dev_scope_init()Joerg Roedel
When ir_dev_scope_init() is called via a rootfs initcall it will check for irq_remapping_enabled before it calls (indirectly) into dmar_acpi_dev_scope_init() which uses the dmar_tbl pointer without any checks. The AMD IOMMU driver also sets the irq_remapping_enabled flag which causes the dmar_acpi_dev_scope_init() function to be called on systems with AMD IOMMU hardware too, causing a boot-time kernel crash. Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-03-24iommu/vt-d: Store PCI segment number in struct intel_iommuDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-03-24iommu/vt-d: Add ACPI devices into dmaru->devices[] arrayDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-03-24iommu/vt-d: Change scope lists to struct device, bus, devfnDavid Woodhouse
It's not only for PCI devices any more, and the scope information for an ACPI device provides the bus and devfn so that has to be stored here too. It is the device pointer itself which needs to be protected with RCU, so the __rcu annotation follows it into the definition of struct dmar_dev_scope, since we're no longer just passing arrays of device pointers around. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-03-20iommu/vt-d: Allocate space for ACPI devicesDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-03-20iommu/vt-d: Parse ANDD recordsDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2014-03-04iommu/vt-d: Unify the way to process DMAR device scope arrayJiang Liu
Now we have a PCI bus notification based mechanism to update DMAR device scope array, we could extend the mechanism to support boot time initialization too, which will help to unify and simplify the implementation. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-03-04iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happensJiang Liu
Current Intel DMAR/IOMMU driver assumes that all PCI devices associated with DMAR/RMRR/ATSR device scope arrays are created at boot time and won't change at runtime, so it caches pointers of associated PCI device object. That assumption may be wrong now due to: 1) introduction of PCI host bridge hotplug 2) PCI device hotplug through sysfs interfaces. Wang Yijing has tried to solve this issue by caching <bus, dev, func> tupple instead of the PCI device object pointer, but that's still unreliable because PCI bus number may change in case of hotplug. Please refer to http://lkml.org/lkml/2013/11/5/64 Message from Yingjing's mail: after remove and rescan a pci device [ 611.857095] dmar: DRHD: handling fault status reg 2 [ 611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000 [ 611.857109] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857524] dmar: DRHD: handling fault status reg 102 [ 611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000 [ 611.857534] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.857936] dmar: DRHD: handling fault status reg 202 [ 611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000 [ 611.857947] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.858351] dmar: DRHD: handling fault status reg 302 [ 611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000 [ 611.858362] DMAR:[fault reason 02] Present bit in context entry is clear [ 611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 611.860983] dmar: DRHD: handling fault status reg 402 [ 611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4 [ 611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope caches by hooking PCI bus notification. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-03-04iommu/vt-d: Use RCU to protect global resources in interrupt contextJiang Liu
Global DMA and interrupt remapping resources may be accessed in interrupt context, so use RCU instead of rwsem to protect them in such cases. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-03-04iommu/vt-d: Introduce a rwsem to protect global data structuresJiang Liu
Introduce a global rwsem dmar_global_lock, which will be used to protect DMAR related global data structures from DMAR/PCI/memory device hotplug operations in process context. DMA and interrupt remapping related data structures are read most, and only change when memory/PCI/DMAR hotplug event happens. So a global rwsem solution is adopted for balance between simplicity and performance. For interrupt remapping driver, function intel_irq_remapping_supported(), dmar_table_init(), intel_enable_irq_remapping(), disable_irq_remapping(), reenable_irq_remapping() and enable_drhd_fault_handling() etc are called during booting, suspending and resuming with interrupt disabled, so no need to take the global lock. For interrupt remapping entry allocation, the locking model is: down_read(&dmar_global_lock); /* Find corresponding iommu */ iommu = map_hpet_to_ir(id); if (iommu) /* * Allocate remapping entry and mark entry busy, * the IOMMU won't be hot-removed until the * allocated entry has been released. */ index = alloc_irte(iommu, irq, 1); up_read(&dmar_global_lock); For DMA remmaping driver, we only uses the dmar_global_lock rwsem to protect functions which are only called in process context. For any function which may be called in interrupt context, we will use RCU to protect them in following patches. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-03-04iommu/vt-d: Introduce macro for_each_dev_scope() to walk device scope entriesJiang Liu
Introduce for_each_dev_scope()/for_each_active_dev_scope() to walk {active} device scope entries. This will help following RCU lock related patches. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-03-04iommu/vt-d: Factor out dmar_alloc_dev_scope() for later reuseJiang Liu
Factor out function dmar_alloc_dev_scope() from dmar_parse_dev_scope() for later reuse. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-09iommu/vt-d, trivial: clean sparse warningsJiang Liu
Clean up most sparse warnings in Intel DMA and interrupt remapping drivers. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-09iommu/vt-d: fix wrong return value of dmar_table_init()Jiang Liu
If dmar_table_init() fails to detect DMAR table on the first call, it will return wrong result on following calls because it always sets dmar_table_initialized no matter if succeeds or fails to detect DMAR table. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-09iommu/vt-d: release invalidation queue when destroying IOMMU unitJiang Liu
Release associated invalidation queue when destroying IOMMU unit to avoid memory leak. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-09iommu/vt-d: keep shared resources when failed to initialize iommu devicesJiang Liu
Data structure drhd->iommu is shared between DMA remapping driver and interrupt remapping driver, so DMA remapping driver shouldn't release drhd->iommu when it failed to initialize IOMMU devices. Otherwise it may cause invalid memory access to the interrupt remapping driver. Sample stack dump: [ 13.315090] BUG: unable to handle kernel paging request at ffffc9000605a088 [ 13.323221] IP: [<ffffffff81461bac>] qi_submit_sync+0x15c/0x400 [ 13.330107] PGD 82f81e067 PUD c2f81e067 PMD 82e846067 PTE 0 [ 13.336818] Oops: 0002 [#1] SMP [ 13.340757] Modules linked in: [ 13.344422] CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.13.0-rc1-gerry+ #7 [ 13.352474] Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.99.99.x059.091020121352 09/10/2012 [ 13.365659] Workqueue: events work_for_cpu_fn [ 13.370774] task: ffff88042ddf00d0 ti: ffff88042ddee000 task.ti: ffff88042dde e000 [ 13.379389] RIP: 0010:[<ffffffff81461bac>] [<ffffffff81461bac>] qi_submit_sy nc+0x15c/0x400 [ 13.389055] RSP: 0000:ffff88042ddef940 EFLAGS: 00010002 [ 13.395151] RAX: 00000000000005e0 RBX: 0000000000000082 RCX: 0000000200000025 [ 13.403308] RDX: ffffc9000605a000 RSI: 0000000000000010 RDI: ffff88042ddb8610 [ 13.411446] RBP: ffff88042ddef9a0 R08: 00000000000005d0 R09: 0000000000000001 [ 13.419599] R10: 0000000000000000 R11: 000000000000005d R12: 000000000000005c [ 13.427742] R13: ffff88102d84d300 R14: 0000000000000174 R15: ffff88042ddb4800 [ 13.435877] FS: 0000000000000000(0000) GS:ffff88043de00000(0000) knlGS:00000 00000000000 [ 13.445168] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 13.451749] CR2: ffffc9000605a088 CR3: 0000000001a0b000 CR4: 00000000000407f0 [ 13.459895] Stack: [ 13.462297] ffff88042ddb85d0 000000000000005d ffff88042ddef9b0 0000000000000 5d0 [ 13.471147] 00000000000005c0 ffff88042ddb8000 000000000000005c 0000000000000 015 [ 13.480001] ffff88042ddb4800 0000000000000282 ffff88042ddefa40 ffff88042ddef ac0 [ 13.488855] Call Trace: [ 13.491771] [<ffffffff8146848d>] modify_irte+0x9d/0xd0 [ 13.497778] [<ffffffff8146886d>] intel_setup_ioapic_entry+0x10d/0x290 [ 13.505250] [<ffffffff810a92a6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [ 13.512824] [<ffffffff810346b0>] ? default_init_apic_ldr+0x60/0x60 [ 13.519998] [<ffffffff81468be0>] setup_ioapic_remapped_entry+0x20/0x30 [ 13.527566] [<ffffffff8103683a>] io_apic_setup_irq_pin+0x12a/0x2c0 [ 13.534742] [<ffffffff8136673b>] ? acpi_pci_irq_find_prt_entry+0x2b9/0x2d8 [ 13.544102] [<ffffffff81037fd5>] io_apic_setup_irq_pin_once+0x85/0xa0 [ 13.551568] [<ffffffff8103816f>] ? mp_find_ioapic_pin+0x8f/0xf0 [ 13.558434] [<ffffffff81038044>] io_apic_set_pci_routing+0x34/0x70 [ 13.565621] [<ffffffff8102f4cf>] mp_register_gsi+0xaf/0x1c0 [ 13.572111] [<ffffffff8102f5ee>] acpi_register_gsi_ioapic+0xe/0x10 [ 13.579286] [<ffffffff8102f33f>] acpi_register_gsi+0xf/0x20 [ 13.585779] [<ffffffff81366b86>] acpi_pci_irq_enable+0x171/0x1e3 [ 13.592764] [<ffffffff8146d771>] pcibios_enable_device+0x31/0x40 [ 13.599744] [<ffffffff81320e9b>] do_pci_enable_device+0x3b/0x60 [ 13.606633] [<ffffffff81322248>] pci_enable_device_flags+0xc8/0x120 [ 13.613887] [<ffffffff813222f3>] pci_enable_device+0x13/0x20 [ 13.620484] [<ffffffff8132fa7e>] pcie_port_device_register+0x1e/0x510 [ 13.627947] [<ffffffff810a92a6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [ 13.635510] [<ffffffff810a947d>] ? trace_hardirqs_on+0xd/0x10 [ 13.642189] [<ffffffff813302b8>] pcie_portdrv_probe+0x58/0xc0 [ 13.648877] [<ffffffff81323ba5>] local_pci_probe+0x45/0xa0 [ 13.655266] [<ffffffff8106bc44>] work_for_cpu_fn+0x14/0x20 [ 13.661656] [<ffffffff8106fa79>] process_one_work+0x369/0x710 [ 13.668334] [<ffffffff8106fa02>] ? process_one_work+0x2f2/0x710 [ 13.675215] [<ffffffff81071d56>] ? worker_thread+0x46/0x690 [ 13.681714] [<ffffffff81072194>] worker_thread+0x484/0x690 [ 13.688109] [<ffffffff81071d10>] ? cancel_delayed_work_sync+0x20/0x20 [ 13.695576] [<ffffffff81079c60>] kthread+0xf0/0x110 [ 13.701300] [<ffffffff8108e7bf>] ? local_clock+0x3f/0x50 [ 13.707492] [<ffffffff81079b70>] ? kthread_create_on_node+0x250/0x250 [ 13.714959] [<ffffffff81574d2c>] ret_from_fork+0x7c/0xb0 [ 13.721152] [<ffffffff81079b70>] ? kthread_create_on_node+0x250/0x250 Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-09iommu/vt-d, trivial: simplify code with existing macrosJiang Liu
Simplify vt-d related code with existing macros and introduce a new macro for_each_active_drhd_unit() to enumerate all active DRHD unit. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-09iommu/vt-d: mark internal functions as staticJiang Liu
Functions alloc_iommu() and parse_ioapics_under_ir() are only used internally, so mark them as static. [Joerg: Made detect_intel_iommu() non-static again for IA64] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-09iommu/vt-d, trivial: clean up unused codeJiang Liu
Remove dead code from VT-d related files. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org> Conflicts: drivers/iommu/dmar.c
2014-01-09iommu/vt-d, trivial: check suitable flag in function detect_intel_iommu()Jiang Liu
Flag irq_remapping_enabled is only set by intel_enable_irq_remapping(), which is called after detect_intel_iommu(). So moving pr_info() from detect_intel_iommu() to intel_enable_irq_remapping(), which also slightly simplifies implementation. Reviewed-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2014-01-09iommu/vt-d: fix PCI device reference leakage on error recovery pathJiang Liu
Function dmar_parse_dev_scope() should release the PCI device reference count gained in function dmar_parse_one_dev_scope() on error recovery, otherwise it will cause PCI device object leakage. This patch also introduces dmar_free_dev_scope(), which will be used to support DMAR device hotplug. Reviewed-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-12-30iommu/vt-d: Mark functions as static in dmar.cRashika Kheria
Mark the functions check_zero_address() and dmar_get_fault_reason() as static in dmar.c because they are not used outside this file. This eliminates the following warnings in dmar.c: drivers/iommu/dmar.c:491:12: warning: no previous prototype for ‘check_zero_address’ [-Wmissing-prototypes] drivers/iommu/dmar.c:1116:13: warning: no previous prototype for ‘dmar_get_fault_reason’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-11-15Merge tag 'iommu-updates-v3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This time the updates contain: - Tracepoints for certain IOMMU-API functions to make their use easier to debug - A tracepoint for IOMMU page faults to make it easier to get them in user space - Updates and fixes for the new ARM SMMU driver after the first hardware showed up - Various other fixes and cleanups in other IOMMU drivers" * tag 'iommu-updates-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (26 commits) iommu/shmobile: Enable the driver on all ARM platforms iommu/tegra-smmu: Staticize tegra_smmu_pm_ops iommu/tegra-gart: Staticize tegra_gart_pm_ops iommu/vt-d: Use list_for_each_entry_safe() for dmar_domain->devices traversal iommu/vt-d: Use for_each_drhd_unit() instead of list_for_each_entry() iommu/vt-d: Fixed interaction of VFIO_IOMMU_MAP_DMA with IOMMU address limits iommu/arm-smmu: Clear global and context bank fault status registers iommu/arm-smmu: Print context fault information iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception iommu/arm-smmu: Refine check for proper size of mapped region iommu/arm-smmu: Switch to subsys_initcall for driver registration iommu/arm-smmu: use relaxed accessors where possible iommu/arm-smmu: replace devm_request_and_ioremap by devm_ioremap_resource iommu: Remove stack trace from broken irq remapping warning iommu: Change iommu driver to call io_page_fault trace event iommu: Add iommu_error class event to iommu trace iommu/tegra: gart: cleanup devm_* functions usage iommu/tegra: Print phys_addr_t using %pa iommu: No need to pass '0x' when '%pa' is used iommu: Change iommu driver to call unmap trace event ...
2013-11-01iommu/vt-d: Use for_each_drhd_unit() instead of list_for_each_entry()Yijing Wang
Use for_each_drhd_unit() instead of list_for_each_entry for better readability. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-10-31ACPICA: Update DMAR table definitions.Lv Zheng
This patch updates DMAR table header definitions as such enhancement has been made in ACPICA upstream already. It ports that change to the Linux source to reduce source code differences between Linux and ACPICA upstream. Build test done on x86-64 machine with the following configs enabled: CONFIG_DMAR_TABLE CONFIG_IRQ_REMAP CONFIG_INTEL_IOMMU This patch does not affect the generation of the Linux kernel binary. [rjw: Changelog] Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-20iommu/vt-d: DMAR reporting table needs at least one DRHDLi, Zhen-Hua
In intel vt-d spec , chapter 8.1 , DMA Remapping Reporting Structure. In the end of the table, it says: Remapping Structures[] - A list of structures. The list will contain one or more DMA Remapping Hardware Unit Definition (DRHD) structures, and zero or more Reserved Memory Region Reporting (RMRR) and Root Port ATS Capability Reporting (ATSR) structures. These structures are described below. So, there should be at least one DRHD structure in DMA Remapping reporting table. If there is no DRHD found, a warning is necessary. Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-24iommu/vt-d: Remove warning for HPET scope typeLinn Crosetto
ACPI_DMAR_SCOPE_TYPE_HPET is parsed by ir_parse_ioapic_hpet_scope() and should not be flagged as an unsupported type. Signed-off-by: Linn Crosetto <linn@hp.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-23iommu/vt-d: Disable translation if already enabledTakao Indoh
This patch disables translation(dma-remapping) before its initialization if it is already enabled. This is needed for kexec/kdump boot. If dma-remapping is enabled in the first kernel, it need to be disabled before initializing its page table during second kernel boot. Wei Hu also reported that this is needed when second kernel boots with intel_iommu=off. Basically iommu->gcmd is used to know whether translation is enabled or disabled, but it is always zero at boot time even when translation is enabled since iommu->gcmd is initialized without considering such a case. Therefor this patch synchronizes iommu->gcmd value with global command register when iommu structure is allocated. Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-03-26iommu/vt-d: dmar_fault should only clear PPF/PFO field.Li, Zhen-Hua
When there is a dmar irq, dmar_fault is called and all of the fields in FSTS are cleared. But ICE/IQE/ITE should not be cleared here, they need to be processed and cleared in function qi_check_fault. [Minor cleanup by Joerg Roedel] Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-03-06iommu, x86: Add DMA remap fault reasonLi, Zhen-Hua
The number of DMA fault reasons in intel's document are from 1 to 0xD, but in dmar.c fault reason 0xD is not printed out. In this document: "Intel Virtualization Technology for Directed I/O Architecture Specification" http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf Chapter 4. Support For Device-IOTLBs Table 6. Unsuccessful Translated Requests There is fault reason for 0xD not listed in kernel: Present context-entry used to process translation request specifies blocking of Translation Requests (Translation Type (T) field value not equal to 01b). This patch adds reason 0xD as well. Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Donald Dutile <ddutile@redhat.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Hannes Reinecke <hare@suse.de> Link: http://lkml.kernel.org/r/1362537797-6034-1-git-send-email-zhen-hual@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-26Merge tag 'iommu-updates-v3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU Updates from Joerg Roedel: "Besides some fixes and cleanups in the code there are three more important changes to point out this time: * New IOMMU driver for the ARM SHMOBILE platform * An IOMMU-API extension for non-paging IOMMUs (required for upcoming PAMU driver) * Rework of the way the Tegra IOMMU driver accesses its registetrs - register windows are easier to extend now. There are also a few changes to non-iommu code, but that is acked by the respective maintainers." * tag 'iommu-updates-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (23 commits) iommu/tegra: assume CONFIG_OF in SMMU driver iommu/tegra: assume CONFIG_OF in gart driver iommu/amd: Remove redundant NULL check before dma_ops_domain_free(). iommu/amd: Initialize device table after dma_ops iommu/vt-d: Zero out allocated memory in dmar_enable_qi iommu/tegra: smmu: Fix incorrect mask for regbase iommu/exynos: Make exynos_sysmmu_disable static ARM: mach-shmobile: r8a7740: Add IPMMU device ARM: mach-shmobile: sh73a0: Add IPMMU device ARM: mach-shmobile: sh7372: Add IPMMU device iommu/shmobile: Add iommu driver for Renesas IPMMU modules iommu: Add DOMAIN_ATTR_WINDOWS domain attribute iommu: Add domain window handling functions iommu: Implement DOMAIN_ATTR_PAGING attribute iommu: Check for valid pgsize_bitmap in iommu_map/unmap iommu: Make sure DOMAIN_ATTR_MAX is really the maximum iommu/tegra: smmu: Change SMMU's dependency on ARCH_TEGRA iommu/tegra: smmu: Use helper function to check for valid register offset iommu/tegra: smmu: Support variable MMIO ranges/blocks iommu/tegra: Add missing spinlock initialization ...
2013-02-07iommu/vt-d: Zero out allocated memory in dmar_enable_qiHannes Reinecke
kmemcheck complained about the use of uninitialized memory. Fix by using kzalloc instead of kmalloc. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-01-28x86, irq: Move irq_remapping_enabled declaration to iommu codeJoerg Roedel
Remove the last left-over from this flag from x86 code. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-06-11iommu/dmar: Use pr_format() instead of PREFIX to tidy up pr_*() callsDonald Dutile
Joe Perches recommended getting rid of the redundant formatting of adding "PREFIX" to all the uses of pr_*() calls. The recommendation helps to reduce source and improve readibility. While cleaning up the PREFIX's, I saw that one of the pr_warn() was redundant in dmar_parse_one_dev_scope(), since the same message was printed after breaking out of the while loop for the same condition, !pdev. So, to avoid a duplicate message, I removed the one in the while loop. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Donald Dutile <ddutile@redhat.com> Cc: iommu@lists.linux-foundation.org Cc: chrisw@redhat.com Cc: suresh.b.siddha@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/1339189991-13129-1-git-send-email-ddutile@redhat.com [ Small whitespace fixes. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-29 13:45:35 +0000