| Age | Commit message (Collapse) | Author |
|---|
|
scripts/checkpatch.pl reports following warning for patch
("bcache: check and adjust logical block size for backing devices"),
WARNING: quoted string split across lines
#146: FILE: drivers/md/bcache/super.c:896:
+ pr_info("%s: sb/logical block size (%u) greater than page size "
+ "(%lu) falling back to device logical block size (%u)",
There are two things to fix up,
- The kernel message print should be in a single line.
- pr_info() won't automatically add new line since v5.8, a '\n' should
be added.
This patch just does the above cleanup in bcache_device_init().
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch changes the asynchronous registration kworker to a delayed
kworker. There is probability queue_work() queues the async registration
kworker to the same CPU (even though very little), then the process
which writing sysfs interface to reigster bcache device may won't return
immeidately. queue_delayed_work() in this patch will delay 10 jiffies
before insert the kworker to run queue, which makes sure the registering
process may always returns to user space in time.
Fixes: 9e23ccf8f0a22 ("bcache: asynchronous devices registration")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's possible for a block driver to set logical block size to
a value greater than page size incorrectly; e.g. bcache takes
the value from the superblock, set by the user w/ make-bcache.
This causes a BUG/NULL pointer dereference in the path:
__blkdev_get()
-> set_init_blocksize() // set i_blkbits based on ...
-> bdev_logical_block_size()
-> queue_logical_block_size() // ... this value
-> bdev_disk_changed()
...
-> blkdev_readpage()
-> block_read_full_page()
-> create_page_buffers() // size = 1 << i_blkbits
-> create_empty_buffers() // give size/take pointer
-> alloc_page_buffers() // return NULL
.. BUG!
Because alloc_page_buffers() is called with size > PAGE_SIZE,
thus it initializes head = NULL, skips the loop, return head;
then create_empty_buffers() gets (and uses) the NULL pointer.
This has been around longer than commit ad6bf88a6c19 ("block:
fix an integer overflow in logical block size"); however, it
increased the range of values that can trigger the issue.
Previously only 8k/16k/32k (on x86/4k page size) would do it,
as greater values overflow unsigned short to zero, and queue_
logical_block_size() would then use the default of 512.
Now the range with unsigned int is much larger, and users w/
the 512k value, which happened to be zero'ed previously and
work fine, started to hit this issue -- as the zero is gone,
and queue_logical_block_size() does return 512k (>PAGE_SIZE.)
Fix this by checking the bcache device's logical block size,
and if it's greater than page size, fallback to the backing/
cached device's logical page size.
This doesn't affect cache devices as those are still checked
for block/page size in read_super(); only the backing/cached
devices are not.
Apparently it's a regression from commit 2903381fce71 ("bcache:
Take data offset from the bdev superblock."), moving the check
into BCACHE_SB_VERSION_CDEV only. Now that we have superblocks
of backing devices out there with this larger value, we cannot
refuse to load them (i.e., have a similar check in _BDEV.)
Ideally perhaps bcache should use all values from the backing
device (physical/logical/io_min block size)? But for now just
fix the problematic case.
Test-case:
# IMG=/root/disk.img
# dd if=/dev/zero of=$IMG bs=1 count=0 seek=1G
# DEV=$(losetup --find --show $IMG)
# make-bcache --bdev $DEV --block 8k
< see dmesg >
Before:
# uname -r
5.7.0-rc7
[ 55.944046] BUG: kernel NULL pointer dereference, address: 0000000000000000
...
[ 55.949742] CPU: 3 PID: 610 Comm: bcache-register Not tainted 5.7.0-rc7 #4
...
[ 55.952281] RIP: 0010:create_empty_buffers+0x1a/0x100
...
[ 55.966434] Call Trace:
[ 55.967021] create_page_buffers+0x48/0x50
[ 55.967834] block_read_full_page+0x49/0x380
[ 55.972181] do_read_cache_page+0x494/0x610
[ 55.974780] read_part_sector+0x2d/0xaa
[ 55.975558] read_lba+0x10e/0x1e0
[ 55.977904] efi_partition+0x120/0x5a6
[ 55.980227] blk_add_partitions+0x161/0x390
[ 55.982177] bdev_disk_changed+0x61/0xd0
[ 55.982961] __blkdev_get+0x350/0x490
[ 55.983715] __device_add_disk+0x318/0x480
[ 55.984539] bch_cached_dev_run+0xc5/0x270
[ 55.986010] register_bcache.cold+0x122/0x179
[ 55.987628] kernfs_fop_write+0xbc/0x1a0
[ 55.988416] vfs_write+0xb1/0x1a0
[ 55.989134] ksys_write+0x5a/0xd0
[ 55.989825] do_syscall_64+0x43/0x140
[ 55.990563] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 55.991519] RIP: 0033:0x7f7d60ba3154
...
After:
# uname -r
5.7.0.bcachelbspgsz
[ 31.672460] bcache: bcache_device_init() bcache0: sb/logical block size (8192) greater than page size (4096) falling back to device logical block size (512)
[ 31.675133] bcache: register_bdev() registered backing device loop0
# grep ^ /sys/block/bcache0/queue/*_block_size
/sys/block/bcache0/queue/logical_block_size:512
/sys/block/bcache0/queue/physical_block_size:8192
Reported-by: Ryan Finnie <ryan@finnie.org>
Reported-by: Sebastian Marsching <sebastian@marsching.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
coccicheck reports:
drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417
In btree_gc_coalesce func, if the coalescing process fails, we will goto
to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock.
Then, it will cause a deadlock when trying to acquire new_nodes[i]->
write_lock for freeing new_nodes[i] before return.
btree_gc_coalesce func details as follows:
if alloc new_nodes[i] fails:
goto out_nocoalesce;
// obtain new_nodes[i]->write_lock
mutex_lock(&new_nodes[i]->write_lock)
// main coalescing process
for (i = nodes - 1; i > 0; --i)
[snipped]
if coalescing process fails:
// Here, directly goto out_nocoalesce
// tag will cause a deadlock
goto out_nocoalesce;
[snipped]
// release new_nodes[i]->write_lock
mutex_unlock(&new_nodes[i]->write_lock)
// coalesing succ, return
return;
out_nocoalesce:
btree_node_free(new_nodes[i]) // free new_nodes[i]
// obtain new_nodes[i]->write_lock
mutex_lock(&new_nodes[i]->write_lock);
// set flag for reuse
clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags);
// release new_nodes[i]->write_lock
mutex_unlock(&new_nodes[i]->write_lock);
To fix the problem, we add a new tag 'out_unlock_nocoalesce' for
releasing new_nodes[i]->write_lock before out_nocoalesce tag. If
coalescing process fails, we will go to out_unlock_nocoalesce tag
for releasing new_nodes[i]->write_lock before free new_nodes[i] in
out_nocoalesce tag.
(Coly Li helps to clean up commit log format.)
Fixes: 2a285686c109816 ("bcache: btree locking rework")
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
"On top of the core changes, here are the block driver changes for this
merge window:
- NVMe changes:
- NVMe over Fibre Channel protocol updates, which also reach
over to drivers/scsi/lpfc (James Smart)
- namespace revalidation support on the target (Anthony
Iliopoulos)
- gcc zero length array fix (Arnd Bergmann)
- nvmet cleanups (Chaitanya Kulkarni)
- misc cleanups and fixes (me, Keith Busch, Sagi Grimberg)
- use a SRQ per completion vector (Max Gurtovoy)
- fix handling of runtime changes to the queue count (Weiping
Zhang)
- t10 protection information support for nvme-rdma and
nvmet-rdma (Israel Rukshin and Max Gurtovoy)
- target side AEN improvements (Chaitanya Kulkarni)
- various fixes and minor improvements all over, icluding the
nvme part of the lpfc driver"
- Floppy code cleanup series (Willy, Denis)
- Floppy contention fix (Jiri)
- Loop CONFIGURE support (Martijn)
- bcache fixes/improvements (Coly, Joe, Colin)
- q->queuedata cleanups (Christoph)
- Get rid of ioctl_by_bdev (Christoph, Stefan)
- md/raid5 allocation fixes (Coly)
- zero length array fixes (Gustavo)
- swim3 task state fix (Xu)"
* tag 'for-5.8/drivers-2020-06-01' of git://git.kernel.dk/linux-block: (166 commits)
bcache: configure the asynchronous registertion to be experimental
bcache: asynchronous devices registration
bcache: fix refcount underflow in bcache_device_free()
bcache: Convert pr_<level> uses to a more typical style
bcache: remove redundant variables i and n
lpfc: Fix return value in __lpfc_nvme_ls_abort
lpfc: fix axchg pointer reference after free and double frees
lpfc: Fix pointer checks and comments in LS receive refactoring
nvme: set dma alignment to qword
nvmet: cleanups the loop in nvmet_async_events_process
nvmet: fix memory leak when removing namespaces and controllers concurrently
nvmet-rdma: add metadata/T10-PI support
nvmet: add metadata support for block devices
nvmet: add metadata/T10-PI support
nvme: add Metadata Capabilities enumerations
nvmet: rename nvmet_check_data_len to nvmet_check_transfer_len
nvmet: rename nvmet_rw_len to nvmet_rw_data_len
nvmet: add metadata characteristics for a namespace
nvme-rdma: add metadata/T10-PI support
nvme-rdma: introduce nvme_rdma_sgl structure
...
|
|
Switch bcache to use the nicer bio accounting helpers, and call the
routines where we also sample the start time to give coherent accounting
results.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In order to avoid the experimental async registration interface to
be treated as new kernel ABI for common users, this patch makes it
as an experimental kernel configure BCACHE_ASYNC_REGISTRAION.
This interface is for extreme large cached data situation, to make sure
the bcache device can always created without the udev timeout issue. For
normal users the async or sync registration does not make difference.
In future when we decide to use the asynchronous registration as default
behavior, this experimental interface may be removed.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When there is a lot of data cached on cache device, the bcach internal
btree can take a very long to validate during the backing device and
cache device registration. In my test, it may takes 55+ minutes to check
all the internal btree nodes.
The problem is that the registration is invoked by udev rules and the
udevd has 180 seconds timeout by default. If the btree node checking
time is longer than udevd timeout, the registering process will be
killed by udevd with SIGKILL. If the registering process has pending
sigal, creating kthread for bcache will fail and the device registration
will fail. The result is, for bcache device which cached a lot of data
on cache device, the bcache device node like /dev/bcache<N> won't create
always due to the very long btree checking time.
A solution to avoid the udevd 180 seconds timeout is to register devices
in an asynchronous way. Which is, after writing cache or backing device
path into /sys/fs/bcache/register_async, the kernel code will create a
kworker and move all the btree node checking (for cache device) or dirty
data counting (for cached device) in the kwork context. Then the kworder
is scheduled on system_wq and the registration code just returned to
user space udev rule task. By this asynchronous way, the udev task for
bcache rule will complete in seconds, no matter how long time spent in
the kworker context, it won't be killed by udevd for a timeout.
After all the checking and counting are done asynchronously in the
kworker, the bcache device will eventually be created successfully.
This patch does the above chagne and add a register sysfs file
/sys/fs/bcache/register_async. Writing the registering device path into
this sysfs file will do the asynchronous registration.
The register_async interface is for very rare condition and won't be
used for common users. In future I plan to make the asynchronous
registration as default behavior, which depends on feedback for this
patch.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The problematic code piece in bcache_device_free() is,
785 static void bcache_device_free(struct bcache_device *d)
786 {
787 struct gendisk *disk = d->disk;
[snipped]
799 if (disk) {
800 if (disk->flags & GENHD_FL_UP)
801 del_gendisk(disk);
802
803 if (disk->queue)
804 blk_cleanup_queue(disk->queue);
805
806 ida_simple_remove(&bcache_device_idx,
807 first_minor_to_idx(disk->first_minor));
808 put_disk(disk);
809 }
[snipped]
816 }
At line 808, put_disk(disk) may encounter kobject refcount of 'disk'
being underflow.
Here is how to reproduce the issue,
- Attche the backing device to a cache device and do random write to
make the cache being dirty.
- Stop the bcache device while the cache device has dirty data of the
backing device.
- Only register the backing device back, NOT register cache device.
- The bcache device node /dev/bcache0 won't show up, because backing
device waits for the cache device shows up for the missing dirty
data.
- Now echo 1 into /sys/fs/bcache/pendings_cleanup, to stop the pending
backing device.
- After the pending backing device stopped, use 'dmesg' to check kernel
message, a use-after-free warning from KASA reported the refcount of
kobject linked to the 'disk' is underflow.
The dropping refcount at line 808 in the above code piece is added by
add_disk(d->disk) in bch_cached_dev_run(). But in the above condition
the cache device is not registered, bch_cached_dev_run() has no chance
to be called and the refcount is not added. The put_disk() for a non-
added refcount of gendisk kobject triggers a underflow warning.
This patch checks whether GENHD_FL_UP is set in disk->flags, if it is
not set then the bcache device was not added, don't call put_disk()
and the the underflow issue can be avoided.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove the trailing newline from the define of pr_fmt and add newlines
to the uses.
Miscellanea:
o Convert bch_bkey_dump from multiple uses of pr_err to pr_cont
as the earlier conversion was inappropriate done causing multiple
lines to be emitted where only a single output line was desired
o Use vsprintf extension %pV in bch_cache_set_error to avoid multiple
line output where only a single line output was desired
o Coalesce formats
Fixes: 6ae63e3501c4 ("bcache: replace printk() by pr_*() routines")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Variables i and n are being assigned but are never used. They are
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Coly Li <colyli@suse.de>
Addresses-Coverity: ("Unused value")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The make_request_fn pointer should only be assigned by blk_alloc_queue.
Fix a left over manual initialization.
Fixes: ff27668ce809 ("bcache: pass the make_request methods to blk_queue_make_request")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
- floppy driver cleanup series from Willy
- NVMe updates and fixes (Various)
- null_blk trace improvements (Chaitanya)
- bcache fixes (Coly)
- md fixes (via Song)
- loop block size change optimizations (Martijn)
- scnprintf() use (Takashi)
* tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits)
null_blk: add trace in null_blk_zoned.c
null_blk: add tracepoint helpers for zoned mode
block: add a zone condition debug helper
nvme: cleanup namespace identifier reporting in nvme_init_ns_head
nvme: rename __nvme_find_ns_head to nvme_find_ns_head
nvme: refactor nvme_identify_ns_descs error handling
nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl
nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl
nvme: Fix controller creation races with teardown flow
nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl
nvme: Fix ctrl use-after-free during sysfs deletion
nvme-pci: Re-order nvme_pci_free_ctrl
nvme: Remove unused return code from nvme_delete_ctrl_sync
nvme: Use nvme_state_terminal helper
nvme: release ida resources
nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO
nvmet-tcp: optimize tcp stack TX when data digest is used
nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow
nvme-multipath: do not reset on unknown status
nvmet-rdma: allocate RW ctxs according to mdts
...
|
|
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bcache is the only driver not actually passing its make_request
methods to blk_queue_make_request, but instead just sets them up
manually a little later. Make bcache follow the common way of
setting up make_request based queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 253a99d95d5b ("bcache: move macro btree() and btree_root()
into btree.h") makes two duplicated declaration into btree.h,
typedef int (btree_map_keys_fn)();
int bch_btree_map_keys();
The kbuild test robot <lkp@intel.com> detects and reports this
problem and this patch fixes it by removing the duplicated ones.
Fixes: 253a99d95d5b ("bcache: move macro btree() and btree_root() into btree.h")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The idea of this patch is from Davidlohr Bueso, he posts a patch
for bcache to optimize barrier usage for read-modify-write atomic
bitops. Indeed such optimization can also apply on other locations
where smp_mb() is used before or after an atomic operation.
This patch replaces smp_mb() with smp_mb__before_atomic() or
smp_mb__after_atomic() in btree.c and writeback.c, where it is used
to synchronize memory cache just earlier on other cores. Although
the locations are not on hot code path, it is always not bad to mkae
things a little better.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We can avoid the unnecessary barrier on non LL/SC architectures,
such as x86. Instead, use the smp_mb__after_atomic().
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When attaching a cached device (a.k.a backing device) to a cache
device, bch_sectors_dirty_init() is called to count dirty sectors
and stripes (see what bcache_dev_sectors_dirty_add() does) on the
cache device.
The counting is done by a single thread recursive function
bch_btree_map_keys() to iterate all the bcache btree nodes.
If the btree has huge number of nodes, bch_sectors_dirty_init() will
take quite long time. In my testing, if the registering cache set has
a existed UUID which matches a already registered cached device, the
automatical attachment during the registration may take more than
55 minutes. This is too long for waiting the bcache to work in real
deployment.
Fortunately when bch_sectors_dirty_init() is called, no other thread
will access the btree yet, it is safe to do a read-only parallelized
dirty sectors counting by multiple threads.
This patch tries to create multiple threads, and each thread tries to
one-by-one count dirty sectors from the sub-tree indexed by a root
node key which the thread fetched. After the sub-tree is counted, the
counting thread will continue to fetch another root node key, until
the fetched key is NULL. How many threads in parallel depends on
the number of keys from the btree root node, and the number of online
CPU core. The thread number will be the less number but no more than
BCH_DIRTY_INIT_THRD_MAX. If there are only 2 keys in root node, it
can only be 2x times faster by this patch. But if there are 10 keys
in the root node, with this patch it can be 10x times faster.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When registering a cache device, bch_btree_check() is called to check
all btree nodes, to make sure the btree is consistent and not
corrupted.
bch_btree_check() is recursively executed in a single thread, when there
are a lot of data cached and the btree is huge, it may take very long
time to check all the btree nodes. In my testing, I observed it took
around 50 minutes to finish bch_btree_check().
When checking the bcache btree nodes, the cache set is not running yet,
and indeed the whole tree is in read-only state, it is safe to create
multiple threads to check the btree in parallel.
This patch tries to create multiple threads, and each thread tries to
one-by-one check the sub-tree indexed by a key from the btree root node.
The parallel thread number depends on how many keys in the btree root
node. At most BCH_BTR_CHKTHREAD_MAX (64) threads can be created, but in
practice is should be min(cpu-number/2, root-node-keys-number).
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch changes macro btree_root() and btree() to bcache_btree_root()
and bcache_btree(), to avoid potential generic name clash in future.
NOTE: for product kernel maintainers, this patch can be skipped if
you feel the rename stuffs introduce inconvenince to patch backport.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In order to accelerate bcache registration speed, the macro btree()
and btree_root() will be referenced out of btree.c. This patch moves
them from btree.c into btree.h with other relative function declaration
in btree.h, for the following changes.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 0b96da639a4874311e9b5156405f69ef9fc3bef8.
We can't just go flushing random signals, under the assumption that the
OOM killer will just do something else. It's not safe from the OOM
perspective, and it could also cause other signals to get randomly lost.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Macro nr_to_fifo_front() is only used once in btree_flush_write(),
it is unncessary indeed. This patch removes this macro and does
calculation directly in place.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 1df3877ff6a4810054237c3259d900ded4468969.
In my testing, sometimes even all the cached btree nodes are freed,
creating gc and allocator kernel threads may still fail. Finally it
turns out that kthread_run() may fail if there is pending signal for
current task. And the pending signal is sent from OOM killer which
is triggered by memory consuption in bch_btree_check().
Therefore explicitly shrinking bcache btree node here does not help,
and after the shrinker callback is improved, as well as pending signals
are ignored before creating kernel threads, now such operation is
unncessary anymore.
This patch reverts the commit 1df3877ff6a4 ("bcache: shrink btree node
cache after bch_btree_check()") because we have better improvement now.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When run a cache set, all the bcache btree node of this cache set will
be checked by bch_btree_check(). If the bcache btree is very large,
iterating all the btree nodes will occupy too much system memory and
the bcache registering process might be selected and killed by system
OOM killer. kthread_run() will fail if current process has pending
signal, therefore the kthread creating in run_cache_set() for gc and
allocator kernel threads are very probably failed for a very large
bcache btree.
Indeed such OOM is safe and the registering process will exit after
the registration done. Therefore this patch flushes pending signals
during the cache set start up, specificly in bch_cache_allocator_start()
and bch_gc_thread_start(), to make sure run_cache_set() won't fail for
large cahced data set.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now if prio_read() failed during starting a cache set, we can print
out error message in run_cache_set() and handle the failure properly.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Dan Carpenter points out that from commit 2aa8c529387c ("bcache: avoid
unnecessary btree nodes flushing in btree_flush_write()"), there is a
incorrect data type usage which leads to the following static checker
warning:
drivers/md/bcache/journal.c:444 btree_flush_write()
warn: 'ref_nr' unsigned <= 0
drivers/md/bcache/journal.c
422 static void btree_flush_write(struct cache_set *c)
423 {
424 struct btree *b, *t, *btree_nodes[BTREE_FLUSH_NR];
425 unsigned int i, nr, ref_nr;
^^^^^^
426 atomic_t *fifo_front_p, *now_fifo_front_p;
427 size_t mask;
428
429 if (c->journal.btree_flushing)
430 return;
431
432 spin_lock(&c->journal.flush_write_lock);
433 if (c->journal.btree_flushing) {
434 spin_unlock(&c->journal.flush_write_lock);
435 return;
436 }
437 c->journal.btree_flushing = true;
438 spin_unlock(&c->journal.flush_write_lock);
439
440 /* get the oldest journal entry and check its refcount */
441 spin_lock(&c->journal.lock);
442 fifo_front_p = &fifo_front(&c->journal.pin);
443 ref_nr = atomic_read(fifo_front_p);
444 if (ref_nr <= 0) {
^^^^^^^^^^^
Unsigned can't be less than zero.
445 /*
446 * do nothing if no btree node references
447 * the oldest journal entry
448 */
449 spin_unlock(&c->journal.lock);
450 goto out;
451 }
452 spin_unlock(&c->journal.lock);
As the warning information indicates, local varaible ref_nr in unsigned
int type is wrong, which does not matche atomic_read() and the "<= 0"
checking.
This patch fixes the above error by defining local variable ref_nr as
int type.
Fixes: 2aa8c529387c ("bcache: avoid unnecessary btree nodes flushing in btree_flush_write()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In year 2007 high performance SSD was still expensive, in order to
save more space for real workload or meta data, the readahead I/Os
for non-meta data was bypassed and not cached on SSD.
In now days, SSD price drops a lot and people can find larger size
SSD with more comfortable price. It is unncessary to alway bypass
normal readahead I/Os to save SSD space for now.
This patch adds options for readahead data cache policies via sysfs
file /sys/block/bcache<N>/readahead_cache_policy, the options are,
- "all": cache all readahead data I/Os.
- "meta-only": only cache meta data, and bypass other regular I/Os.
If users want to make bcache continue to only cache readahead request
for metadata and bypass regular data readahead, please set "meta-only"
to this sysfs file. By default, bcache will back to cache all read-
ahead requests now.
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In bset.h, macro bset_bkey_last() is defined as,
bkey_idx((struct bkey *) (i)->d, (i)->keys)
Parameter i can be variable type of data structure, the macro always
works once the type of struct i has member 'd' and 'keys'.
bset_bkey_last() is also used in macro csum_set() to calculate the
checksum of a on-disk data structure. When csum_set() is used to
calculate checksum of on-disk bcache super block, the parameter 'i'
data type is struct cache_sb_disk. Inside struct cache_sb_disk (also in
struct cache_sb) the member keys is __u16 type. But bkey_idx() expects
unsigned int (a 32bit width), so there is problem when sending
parameters via stack to call bkey_idx().
Sparse tool from Intel 0day kbuild system reports this incompatible
problem. bkey_idx() is part of user space API, so the simplest fix is
to cast the (i)->keys to unsigned int type in macro bset_bkey_last().
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 83ff9318c44ba ("bcache: not use hard coded memset size in
bch_cache_accounting_clear()") tries to make the code more easy to
understand by removing the hard coded number with following change,
void bch_cache_accounting_clear(...)
{
memset(&acc->total.cache_hits,
0,
- sizeof(unsigned long) * 7);
+ sizeof(struct cache_stats));
}
Unfortunately the change was wrong (it also tells us the original code
was not easy to correctly understand). The hard coded number 7 is used
because in struct cache_stats,
15 struct cache_stats {
16 struct kobject kobj;
17
18 unsigned long cache_hits;
19 unsigned long cache_misses;
20 unsigned long cache_bypass_hits;
21 unsigned long cache_bypass_misses;
22 unsigned long cache_readaheads;
23 unsigned long cache_miss_collisions;
24 unsigned long sectors_bypassed;
25
26 unsigned int rescale;
27 };
only members in LINE 18-24 want to be set to 0. It is wrong to use
'sizeof(struct cache_stats)' to replace 'sizeof(unsigned long) * 7), the
memory objects behind acc->total is staled by this change.
Сорокин Артем Сергеевич reports that by the following steps, kernel
panic will be triggered,
1. Create new set: make-bcache -B /dev/nvme1n1 -C /dev/sda --wipe-bcache
2. Run in /sys/fs/bcache/<uuid>:
echo 1 > clear_stats && cat stats_five_minute/cache_bypass_hits
I can reproduce the panic and get following dmesg with KASAN enabled,
[22613.172742] ==================================================================
[22613.172862] BUG: KASAN: null-ptr-deref in sysfs_kf_seq_show+0x117/0x230
[22613.172864] Read of size 8 at addr 0000000000000000 by task cat/6753
[22613.172870] CPU: 1 PID: 6753 Comm: cat Not tainted 5.5.0-rc7-lp151.28.16-default+ #11
[22613.172872] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019
[22613.172873] Call Trace:
[22613.172964] dump_stack+0x8b/0xbb
[22613.172968] ? sysfs_kf_seq_show+0x117/0x230
[22613.172970] ? sysfs_kf_seq_show+0x117/0x230
[22613.173031] __kasan_report+0x176/0x192
[22613.173064] ? pr_cont_kernfs_name+0x40/0x60
[22613.173067] ? sysfs_kf_seq_show+0x117/0x230
[22613.173070] kasan_report+0xe/0x20
[22613.173072] sysfs_kf_seq_show+0x117/0x230
[22613.173105] seq_read+0x199/0x6d0
[22613.173110] vfs_read+0xa5/0x1a0
[22613.173113] ksys_read+0x110/0x160
[22613.173115] ? kernel_write+0xb0/0xb0
[22613.173177] do_syscall_64+0x77/0x290
[22613.173238] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[22613.173241] RIP: 0033:0x7fc2c886ac61
[22613.173244] Code: fe ff ff 48 8d 3d c7 a0 09 00 48 83 ec 08 e8 46 03 02 00 66 0f 1f 44 00 00 8b 05 ca fb 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89
[22613.173245] RSP: 002b:00007ffebe776d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[22613.173248] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2c886ac61
[22613.173249] RDX: 0000000000020000 RSI: 00007fc2c8cca000 RDI: 0000000000000003
[22613.173250] RBP: 0000000000020000 R08: ffffffffffffffff R09: 0000000000000000
[22613.173251] R10: 000000000000038c R11: 0000000000000246 R12: 00007fc2c8cca000
[22613.173253] R13: 0000000000000003 R14: 00007fc2c8cca00f R15: 0000000000020000
[22613.173255] ==================================================================
[22613.173256] Disabling lock debugging due to kernel taint
[22613.173350] BUG: kernel NULL pointer dereference, address: 0000000000000000
[22613.178380] #PF: supervisor read access in kernel mode
[22613.180959] #PF: error_code(0x0000) - not-present page
[22613.183444] PGD 0 P4D 0
[22613.184867] Oops: 0000 [#1] SMP KASAN PTI
[22613.186797] CPU: 1 PID: 6753 Comm: cat Tainted: G B 5.5.0-rc7-lp151.28.16-default+ #11
[22613.191253] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019
[22613.196706] RIP: 0010:sysfs_kf_seq_show+0x117/0x230
[22613.199097] Code: ff 48 8b 0b 48 8b 44 24 08 48 01 e9 eb a6 31 f6 48 89 cf ba 00 10 00 00 48 89 4c 24 10 e8 b1 e6 e9 ff 4c 89 ff e8 19 07 ea ff <49> 8b 07 48 85 c0 48 89 44 24 08 0f 84 91 00 00 00 49 8b 6d 00 48
[22613.208016] RSP: 0018:ffff8881d4f8fd78 EFLAGS: 00010246
[22613.210448] RAX: 0000000000000000 RBX: ffff8881eb99b180 RCX: ffffffff810d9ef6
[22613.213691] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246
[22613.216893] RBP: 0000000000001000 R08: fffffbfff072ddcd R09: fffffbfff072ddcd
[22613.220075] R10: 0000000000000001 R11: fffffbfff072ddcc R12: ffff8881de5c0200
[22613.223256] R13: ffff8881ed175500 R14: ffff8881eb99b198 R15: 0000000000000000
[22613.226290] FS: 00007fc2c8d3d500(0000) GS:ffff8881f2a80000(0000) knlGS:0000000000000000
[22613.229637] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22613.231993] CR2: 0000000000000000 CR3: 00000001ec89a004 CR4: 00000000003606e0
[22613.234909] Call Trace:
[22613.235931] seq_read+0x199/0x6d0
[22613.237259] vfs_read+0xa5/0x1a0
[22613.239229] ksys_read+0x110/0x160
[22613.240590] ? kernel_write+0xb0/0xb0
[22613.242040] do_syscall_64+0x77/0x290
[22613.243625] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[22613.245450] RIP: 0033:0x7fc2c886ac61
[22613.246706] Code: fe ff ff 48 8d 3d c7 a0 09 00 48 83 ec 08 e8 46 03 02 00 66 0f 1f 44 00 00 8b 05 ca fb 2c 00 48 63 ff 85 c0 75 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48 89
[22613.253296] RSP: 002b:00007ffebe776d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[22613.255835] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fc2c886ac61
[22613.258472] RDX: 0000000000020000 RSI: 00007fc2c8cca000 RDI: 0000000000000003
[22613.260807] RBP: 0000000000020000 R08: ffffffffffffffff R09: 0000000000000000
[22613.263188] R10: 000000000000038c R11: 0000000000000246 R12: 00007fc2c8cca000
[22613.265598] R13: 0000000000000003 R14: 00007fc2c8cca00f R15: 0000000000020000
[22613.268729] Modules linked in: scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs vmw_vsock_vmci_transport vsock fuse bnep kvm_intel kvm irqbypass crc32_pclmul crc32c_intel ghash_clmulni_intel snd_ens1371 snd_ac97_codec ac97_bus bcache snd_pcm btusb btrtl btbcm btintel crc64 aesni_intel glue_helper crypto_simd vmw_balloon cryptd bluetooth snd_timer snd_rawmidi snd joydev pcspkr e1000 rfkill vmw_vmci soundcore ecdh_generic ecc gameport i2c_piix4 mptctl ac button hid_generic usbhid sr_mod cdrom ata_generic ehci_pci vmwgfx uhci_hcd drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ttm ehci_hcd mptspi scsi_transport_spi mptscsih ata_piix mptbase ahci usbcore libahci drm sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua
[22613.292429] CR2: 0000000000000000
[22613.293563] ---[ end trace a074b26a8508f378 ]---
[22613.295138] RIP: 0010:sysfs_kf_seq_show+0x117/0x230
[22613.296769] Code: ff 48 8b 0b 48 8b 44 24 08 48 01 e9 eb a6 31 f6 48 89 cf ba 00 10 00 00 48 89 4c 24 10 e8 b1 e6 e9 ff 4c 89 ff e8 19 07 ea ff <49> 8b 07 48 85 c0 48 89 44 24 08 0f 84 91 00 00 00 49 8b 6d 00 48
[22613.303553] RSP: 0018:ffff8881d4f8fd78 EFLAGS: 00010246
[22613.305280] RAX: 0000000000000000 RBX: ffff8881eb99b180 RCX: ffffffff810d9ef6
[22613.307924] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246
[22613.310272] RBP: 0000000000001000 R08: fffffbfff072ddcd R09: fffffbfff072ddcd
[22613.312685] R10: 0000000000000001 R11: fffffbfff072ddcc R12: ffff8881de5c0200
[22613.315076] R13: ffff8881ed175500 R14: ffff8881eb99b198 R15: 0000000000000000
[22613.318116] FS: 00007fc2c8d3d500(0000) GS:ffff8881f2a80000(0000) knlGS:0000000000000000
[22613.320743] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22613.322628] CR2: 0000000000000000 CR3: 00000001ec89a004 CR4: 00000000003606e0
Here this patch fixes the following problem by explicity set all the 7
members to 0 in bch_cache_accounting_clear().
Reported-by: Сорокин Артем Сергеевич <a.sorokin@bank-hlynov.ru>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When shrink btree node cache from c->btree_cache in bch_mca_scan(),
no matter the selected node is reaped or not, it will be rotated from
the head to the tail of c->btree_cache list. But in bcache journal
code, when flushing the btree nodes with oldest journal entry, btree
nodes are iterated and slected from the tail of c->btree_cache list in
btree_flush_write(). The list_rotate_left() in bch_mca_scan() will
make btree_flush_write() iterate more nodes in c->btree_list in reverse
order.
This patch just reaps the selected btree node cache, and not move it
from the head to the tail of c->btree_cache list. Then bch_mca_scan()
will not mess up c->btree_cache list to btree_flush_write().
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In order to skip the most recently freed btree node cahce, currently
in bch_mca_scan() the first 3 caches in c->btree_cache_freeable list
are skipped when shrinking bcache node caches in bch_mca_scan(). The
related code in bch_mca_scan() is,
737 list_for_each_entry_safe(b, t, &c->btree_cache_freeable, list) {
738 if (nr <= 0)
739 goto out;
740
741 if (++i > 3 &&
742 !mca_reap(b, 0, false)) {
lines free cache memory
746 }
747 nr--;
748 }
The problem is, if virtual memory code calls bch_mca_scan() and
the calculated 'nr' is 1 or 2, then in the above loop, nothing will
be shunk. In such case, if slub/slab manager calls bch_mca_scan()
for many times with small scan number, it does not help to shrink
cache memory and just wasts CPU cycles.
This patch just selects btree node caches from tail of the
c->btree_cache_freeable list, then the newly freed host cache can
still be allocated by mca_alloc(), and at least 1 node can be shunk.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The member 'accessed' of struct btree is used in bch_mca_scan() when
shrinking btree node caches. The original idea is, if b->accessed is
set, clean it and look at next btree node cache from c->btree_cache
list, and only shrink the caches whose b->accessed is cleaned. Then
only cold btree node cache will be shrunk.
But when I/O pressure is high, it is very probably that b->accessed
of a btree node cache will be set again in bch_btree_node_get()
before bch_mca_scan() selects it again. Then there is no chance for
bch_mca_scan() to shrink enough memory back to slub or slab system.
This patch removes member accessed from struct btree, then once a
btree node ache is selected, it will be immediately shunk. By this
change, bch_mca_scan() may release btree node cahce more efficiently.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
the commit 91be66e1318f ("bcache: performance improvement for
btree_flush_write()") was an effort to flushing btree node with oldest
btree node faster in following methods,
- Only iterate dirty btree nodes in c->btree_cache, avoid scanning a lot
of clean btree nodes.
- Take c->btree_cache as a LRU-like list, aggressively flushing all
dirty nodes from tail of c->btree_cache util the btree node with
oldest journal entry is flushed. This is to reduce the time of holding
c->bucket_lock.
Guoju Fang and Shuang Li reported that they observe unexptected extra
write I/Os on cache device after applying the above patch. Guoju Fang
provideed more detailed diagnose information that the aggressive
btree nodes flushing may cause 10x more btree nodes to flush in his
workload. He points out when system memory is large enough to hold all
btree nodes in memory, c->btree_cache is not a LRU-like list any more.
Then the btree node with oldest journal entry is very probably not-
close to the tail of c->btree_cache list. In such situation much more
dirty btree nodes will be aggressively flushed before the target node
is flushed. When slow SATA SSD is used as cache device, such over-
aggressive flushing behavior will cause performance regression.
After spending a lot of time on debug and diagnose, I find the real
condition is more complicated, aggressive flushing dirty btree nodes
from tail of c->btree_cache list is not a good solution.
- When all btree nodes are cached in memory, c->btree_cache is not
a LRU-like list, the btree nodes with oldest journal entry won't
be close to the tail of the list.
- There can be hundreds dirty btree nodes reference the oldest journal
entry, before flushing all the nodes the oldest journal entry cannot
be reclaimed.
When the above two conditions mixed together, a simply flushing from
tail of c->btree_cache list is really NOT a good idea.
Fortunately there is still chance to make btree_flush_write() work
better. Here is how this patch avoids unnecessary btree nodes flushing,
- Only acquire c->journal.lock when getting oldest journal entry of
fifo c->journal.pin. In rested locations check the journal entries
locklessly, so their values can be changed on other cores
in parallel.
- In loop list_for_each_entry_safe_reverse(), checking latest front
point of fifo c->journal.pin. If it is different from the original
point which we get with locking c->journal.lock, it means the oldest
journal entry is reclaim on other cores. At this moment, all selected
dirty nodes recorded in array btree_nodes[] are all flushed and clean
on other CPU cores, it is unncessary to iterate c->btree_cache any
longer. Just quit the list_for_each_entry_safe_reverse() loop and
the following for-loop will skip all the selected clean nodes.
- Find a proper time to quit the list_for_each_entry_safe_reverse()
loop. Check the refcount value of orignial fifo front point, if the
value is larger than selected node number of btree_nodes[], it means
more matching btree nodes should be scanned. Otherwise it means no
more matching btee nodes in rest of c->btree_cache list, the loop
can be quit. If the original oldest journal entry is reclaimed and
fifo front point is updated, the refcount of original fifo front point
will be 0, then the loop will be quit too.
- Not hold c->bucket_lock too long time. c->bucket_lock is also required
for space allocation for cached data, hold it for too long time will
block regular I/O requests. When iterating list c->btree_cache, even
there are a lot of maching btree nodes, in order to not holding
c->bucket_lock for too long time, only BTREE_FLUSH_NR nodes are
selected and to flush in following for-loop.
With this patch, only btree nodes referencing oldest journal entry
are flushed to cache device, no aggressive flushing for unnecessary
btree node any more. And in order to avoid blocking regluar I/O
requests, each time when btree_flush_write() called, at most only
BTREE_FLUSH_NR btree nodes are selected to flush, even there are more
maching btree nodes in list c->btree_cache.
At last, one more thing to explain: Why it is safe to read front point
of c->journal.pin without holding c->journal.lock inside the
list_for_each_entry_safe_reverse() loop ?
Here is my answer: When reading the front point of fifo c->journal.pin,
we don't need to know the exact value of front point, we just want to
check whether the value is different from the original front point
(which is accurate value because we get it while c->jouranl.lock is
held). For such purpose, it works as expected without holding
c->journal.lock. Even the front point is changed on other CPU core and
not updated to local core, and current iterating btree node has
identical journal entry local as original fetched fifo front point, it
is still safe. Because after holding mutex b->write_lock (with memory
barrier) this btree node can be found as clean and skipped, the loop
will quite latter when iterate on next node of list c->btree_cache.
Fixes: 91be66e1318f ("bcache: performance improvement for btree_flush_write()")
Reported-by: Guoju Fang <fangguoju@gmail.com>
Reported-by: Shuang Li <psymon@bonuscloud.io>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To explain the pages allocated from mempool state->pool can be
swapped in __btree_sort(), because state->pool is a page pool,
which allocates pages by alloc_pages() indeed.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid a pointless dependency on buffer heads in bcache by simply open
coding reading a single page. Also add a SB_OFFSET define for the
byte offset of the superblock instead of using magic numbers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This allows to properly build the superblock bio including the offset in
the page using the normal bio helpers. This fixes writing the superblock
for page sizes larger than 4k where the sb write bio would need an offset
in the bio_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Returning the properly typed actual data structure insteaf of the
containing struct page will save the callers some work going
forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid an extra reference count roundtrip by transferring the sb_page
ownership to the lower level register helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The patch "bcache: rework error unwinding in register_bcache" introduces
a use-after-free regression in register_bcache(). Here are current code,
2510 out_free_path:
2511 kfree(path);
2512 out_module_put:
2513 module_put(THIS_MODULE);
2514 out:
2515 pr_info("error %s: %s", path, err);
2516 return ret;
If some error happens and the above code path is executed, at line 2511
path is released, but referenced at line 2515. Then KASAN reports a use-
after-free error message.
This patch changes line 2515 in the following way to fix the problem,
2515 pr_info("error %s: %s", path?path:"", err);
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Patch "bcache: rework error unwinding in register_bcache" from
Christoph Hellwig changes the local variables 'path' and 'err'
in undefined initial state. If the code in register_bcache() jumps
to label 'out:' or 'out_module_put:' by goto, these two variables
might be reference with undefined value by the following line,
out_module_put:
module_put(THIS_MODULE);
out:
pr_info("error %s: %s", path, err);
return ret;
Therefore this patch initializes these two local variables properly
in register_bcache() to avoid such issue.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split the successful and error return path, and use one goto label for each
resource to unwind. This also fixes some small errors like leaking the
module reference count in the reboot case (which seems entirely harmless)
or printing the wrong warning messages for early failures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Split out an on-disk version struct cache_sb with the proper endianness
annotations. This fixes a fair chunk of sparse warnings, but there are
some left due to the way the checksum is defined.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Same as cache device, the buffer page needs to be put while
freeing cached_dev. Otherwise a page would be leaked every
time a cached_dev is stopped.
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Coly says:
"Guoju Fang talked to me today, he told me this change was unnecessary
and I was over-thought.
Then I realize fifo_idx() uses a mask to handle the array index overflow
condition, so the index swap in journal_pin_cmp() won't happen. And yes,
Guoju and Kent are correct.
Since you already applied this patch, can you please to remove this
patch from your for-next branch? This single patch does not break
thing, but it is unecessary at this moment."
This reverts commit c0e0954e909c17b43d176ab219fc598964616ae6.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
None of the exported bcache symbols are actually used anywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no block directory this file needs includes from.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In bch_mca_scan(), the number of shrinking btree node is calculated
by code like this,
unsigned long nr = sc->nr_to_scan;
nr /= c->btree_pages;
nr = min_t(unsigned long, nr, mca_can_free(c));
variable sc->nr_to_scan is number of objects (here is bcache B+tree
nodes' number) to shrink, and pointer variable sc is sent from memory
management code as parametr of a callback.
If sc->nr_to_scan is smaller than c->btree_pages, after the above
calculation, variable 'nr' will be 0 and nothing will be shrunk. It is
frequeently observed that only 1 or 2 is set to sc->nr_to_scan and make
nr to be zero. Then bch_mca_scan() will do nothing more then acquiring
and releasing mutex c->bucket_lock.
This patch checkes whether nr is 0 after the above calculation, if 0
is the result then set 1 to variable 'n'. Then at least bch_mca_scan()
will try to shrink a single B+tree node.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
