| Age | Commit message (Collapse) | Author |
|---|
|
Avoids unconventional use of 'static const' and enum in headers.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add details describing the vdo zone and thread model to the
documentation comments for major vdo components. Also added
some high-level description of the block map structure.
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Only one user of WRITE_FLAGS so no need to factor it out in an enum
(which causes sparse's 'mixed bitwiseness' warning). Just use the
flags in the only consumer.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Annotate both open_index() and close_index() with
__must_hold(&zones->lock) to silence these sparse warnings:
warning: context imbalance in 'close_index' - unexpected unlock
warning: context imbalance in 'open_index' - unexpected unlock
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Factor wait_permit() out from acquire_permit() so that the latter
always holds the spinlock and the former always releases it.
Otherwise sparse complains about locking context imbalances due to
conditional spin_unlock in acquire_permit:
warning: context imbalance in 'acquire_permit' - different lock contexts for basic block
warning: context imbalance in 'vdo_launch_bio' - unexpected unlock
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Use proper blk_opf_t type rather than unsigned int.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Addresses various sparse warnings like:
warning: symbol 'SYMBOL' was not declared. Should it be static?
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Add braces around multi-line while loops and if statements. Also
remove excess newlines.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Remove extra blank line, mark function inline, add missing
braces, and fix a typo in a comment.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Comment typo, whitespace issues, mark function inline.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Eliminate use of "trim" in favor of "discard" since it reflects the
top-level Linux discard primative rather than the ATA specific ditto.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
No need to increment each UDS_ error code manually (relative to
UDS_ERROR_CODE_BASE).
Also, remove unused PRP_BLOCK_START and PRP_BLOCK_END.
Lastly, UDS_SUCCESS and VDO_SUCCESS are used interchangeably; so best
to explicitly set VDO_SUCCESS equal to UDS_SUCCESS.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
'completion' is more informative name for a 'struct vdo_completion'
than 'parent'.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
The vdo_page_cache's 'vdo' is the same as the block_map's vdo
instance, so use that to save 2 extra dereferences.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
The block_map is passed to initialize_block_map_zone, but the
block_map's vdo member is already initialized with the same vdo
instance, so just use it.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Rename 'pages' to 'num_pages' in distribute_page_over_waitq().
Update assert message in validate_completed_page() to model others.
Tweak line-wrapping on a comment that was needlessly long.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Requires moving dm-vdo-target.c into drivers/md/dm-vdo/
This change adds a proper drivers/md/dm-vdo/Makefile and eliminates
the abnormal use of patsubst in drivers/md/Makefile -- which was the
cause of at least one build failure that was reported by the upstream
build bot.
Also, split out VDO's drivers/md/dm-vdo/Kconfig and include it from
drivers/md/Kconfig
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
dm_kcopyd_client_create() returns an ERR_PTR so its return must be
checked with IS_ERR().
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Chung Chung <cchung@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Use get_unaligned_le64() on the hash lock's record name to serve as
the key to use with the int hash-map.
Switching to using int hash-map removes the only consumer of pointer
hash-map, as such it is removed.
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Rename vdo_waitq_dequeue_next_waiter to vdo_waitq_dequeue_waiter. The
"next" aspect of returned waiter is implied. "next" also isn't
informative ("oldest" would be). Removing "next_" adds symmetry to
vdo_waitq_enqueue_waiter().
Also fix whitespace and comments from previous waitq commit.
Reviewed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Rather than incrementally dequeue from the zone->flush_waiters
vdo_wait_queue, simply re-initialize it.
Reviewed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Remove temporary 'matched_waiters' waitq and just enqueue matched
waiters directly to the caller provided 'matched_waitq'.
Reviewed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Reviewed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Rename various interfaces and structs associated with vdo's wait-queue,
e.g.: s/wait_queue/vdo_wait_queue/, s/waiter/vdo_waiter/, etc.
Now all function names start with "vdo_waitq_" or "vdo_waiter_".
Reviewed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Rename process_vio_io() to vdo_submit_vio(), and process_data_vio_io() to
submit_data_vio().
Reviewed-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Rename submit_data_vio_io() to vdo_submit_data_vio().
Reviewed-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Rename submit_flush_vio() to vdo_submit_flush_vio().
Reviewed-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Rename submit_metadata_vio() to vdo_submit_metadata_vio().
Reviewed-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
Just open-code access to bio's sector.
Reviewed-by: Susan LeGendre-McGhee <slegendr@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
|
|
dm-vdo targets are not supported for 32-bit configurations. A vdo target
typically requires 1 to 1.5 GB of memory at any given time, which is likely
a large fraction of the addressable memory of a 32-bit system. At the same
time, the amount of addressable storage attached to a 32-bit system may not
be large enough for deduplication to provide much benefit. Because of these
concerns, 32-bit platforms are deemed unlikely to benefit from using a vdo
target, so dm-vdo is targeted only at 64-bit platforms.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: John Wiele <jwiele@redhat.com>
Signed-off-by: John Wiele <jwiele@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
This adds the dm-vdo target.
The dm-vdo target provides inline deduplication, compression, and
zero-block elimination, allowing applications to consume less actual
storage than a normal target. By layering it with other device mapper
targets, it can add these features to any storage stack. It can also
provide a common deduplication pool for groups of targets. The vdo target
does not protect against data corruption, relying instead on integrity
protection of the storage below it.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Co-developed-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Co-developed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add support for dumping detailed vdo state to the kernel log via a dmsetup
message. The dump code is not thread-safe and is generally intended for use
only when the vdo is hung.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Co-developed-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Co-developed-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Ken Raeburn <raeburn@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add data and methods setting run time parameters via sysfs, and to
make state and statistics information available through sysfs.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Co-developed-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add data and methods to report statisics.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add data and methods for marshalling and unmarshalling the persistent
metadata.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add the data and methods that manage the dm-vdo target itself. This
includes the overall state of the target and its threads, the state of
the logical volumes, startup, shutdown, and statistics.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
When a vdo is restarted after a crash, it will automatically attempt to
recover from its journals.
If a vdo encounters an unrecoverable error, it will enter read-only mode.
This mode indicates that some previously acknowledged data may have been
lost. The vdo may be instructed to rebuild as best it can in order to
return to a writable state. Although some data may be lost, this process
will ensure that the vdo's own metadata is self-consistent.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The recovery journal is used to amortize updates across the block map and
slab depot. Each write request causes an entry to be made in the journal.
Entries are either "data remappings" or "block map remappings." For a data
remapping, the journal records the logical address affected and its old and
new physical mappings. For a block map remapping, the journal records the
block map page number and the physical block allocated for it (block map
pages are never reclaimed, so the old mapping is always 0). Each journal
entry and the data write it represents must be stable on disk before the
other metadata structures may be updated to reflect the operation.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The set of leaf pages of the block map tree is too large to fit in memory,
so each block map zone maintains a cache of leaf pages. This patch adds the
implementation of that cache.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The block map contains the logical to physical mapping. It can be thought
of as an array with one entry per logical address. Each entry is 5 bytes:
36 bits contain the physical block number which holds the data for the
given logical address, and the remaining 4 bits are used to indicate the
nature of the mapping. Of the 16 possible states, one represents a logical
address which is unmapped (i.e. it has never been written, or has been
discarded), one represents an uncompressed block, and the other 14 states
are used to indicate that the mapped data is compressed, and which of the
compression slots in the compressed block this logical address maps to.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add the data and methods that implement the slab_depot that manages
the allocation of slabs of blocks added by the preceding patches.
Co-developed-by: J. corwin Coburn <corwin@hurlbutnet.net>
Signed-off-by: J. corwin Coburn <corwin@hurlbutnet.net>
Co-developed-by: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Michael Sclafani <dm-devel@lists.linux.dev>
Co-developed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
