summaryrefslogtreecommitdiff
path: root/drivers/media/platform
AgeCommit message (Collapse)Author
2023-07-14media: verisilicon: change confusingly named relaxed register accessArnd Bergmann
The register abstraction has wrappers around both the normal writel() and its writel_relaxed() counterpart, but this has led to a lot of users ending up with the relaxed version. There is sometimes a need to intentionally pick the relaxed accessor for performance critical functions, but I noticed that each hantro_reg_write() call also contains a non-relaxed readl(), which is typically much more expensive than a writel, so there is little benefit here but an added risk of missing a serialization against DMA. To make this behave like other interfaces, use the normal accessor by default and only provide the relaxed version as an alternative for performance critical code. hantro_postproc.c is the only place that used both the relaxed and normal writel, but this does not seem cricital either, so change it all to the normal ones. [hverkuil: fix function prototype alignment] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14media: verisilicon: fix excessive stack usageArnd Bergmann
In some configurations, gcc decides not to inline the register accessor functions, which in turn leads to lots of temporary hantro_reg structures on the stack that cannot be eliminated because they escape into an uninlined function: drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c:1022:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] Mark all of these as __always_inline so the compiler is able to completely eliminate the temporary structures instead, which brings the stack usage back down to just the normal local variables. Closes: https://lore.kernel.org/oe-kbuild-all/202306151506.goHEegOd-lkp@intel.com/ [hverkuil: fix function prototype alignment, wrap commit log] Reported-by: kernel test robot <lkp@intel.com> Fixes: 727a400686a2 ("media: verisilicon: Add Rockchip AV1 decoder") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14media: mediatek: vcodec: fix cancel_work_sync fail with fluster testYunfei Dong
Will cause below warning then reboot when exercising the decoder with fluster on mt8192-asurada-spherion. This deinit function is called on the v4l2 release callback, even though the work might not have been initialized as that only happens if/when the codec specific 'decode' callback is called (as a result of device_run m2m callback). CPU: 5 PID: 2338 Comm: gst-launch-1.0 Tainted: G W 6.4.0-rc5-next-20230607+ #475 Hardware name: Google Spherion (rev0 - 3) (DT) pstate: 00400009 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __flush_work.isra.0+0x23c/0x258 lr : __cancel_work_timer+0x14c/0x1c8 sp : ffff8000896e3b00 x29: ffff8000896e3b00 x28: ffff57c3d4079f80 x27: 0000000000000000 x26: ffff57c3d4079f80 x25: ffffb76395b59dc8 x24: 0000000000000001 x23: ffffb763928daab8 x22: ffff57c3d4079f80 x21: 0000000000000000 x20: ffffb763955f6778 x19: ffff57c3cf06f4a0 x18: 0000000000000000 x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000 x14: ffff57c3c03a1f80 x13: ffffa0616a2fc000 x12: 000000003464d91d x11: 0000000000000000 x10: 0000000000001b10 x9 : ffffb763928de61c x8 : ffff57c3d407baf0 x7 : 0000000000000000 x6 : ffff57c3d4079f80 x5 : ffff57c3d4079f80 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff8000896e3bf0 x1 : 0000000000000011 x0 : 0000000000000000 Call trace: __flush_work.isra.0+0x23c/0x258 __cancel_work_timer+0x14c/0x1c8 cancel_work_sync+0x1c/0x30 vdec_msg_queue_deinit+0xac/0xc8 vdec_h264_slice_deinit+0x64/0xb8 vdec_if_deinit+0x3c/0x68 mtk_vcodec_dec_release+0x20/0x40 fops_vcodec_release+0x50/0xd8 v4l2_release+0x7c/0x100 __fput+0x80/0x270 ____fput+0x18/0x30 task_work_run+0x78/0xe0 do_notify_resume+0x29c/0x7f8 el0_svc+0xa4/0xb8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 ---[ end trace 0000000000000000 ]--- Fixes: 297160d411e3 ("media: mediatek: vcodec: move core context from device to each instance") Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14media: mtk_jpeg_core: avoid unused-variable warningArnd Bergmann
The mtk8195_jpegenc_drvdata object was added outside of an #ifdef causing a harmless build warning. drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1879:32: error: 'mtk8195_jpegenc_drvdata' defined but not used [-Werror=unused-variable] 1879 | static struct mtk_jpeg_variant mtk8195_jpegenc_drvdata = { | ^~~~~~~~~~~~~~~~~~~~~~~ A follow-up patch moved it inside of an #ifdef, which caused more warnings, and a third patch ended up adding even more #ifdefs. These were all bogus, since the actual problem here is the incorrect use of of_ptr(). Since the driver (like any other modern platform driver) only works in combination with CONFIG_OF, there is no point in hiding the reference, so just remove that along with all the pointless #ifdef checks in the driver. This improves build coverage and avoids running into the same problem again when another part of the driver gets changed that relies on the #ifdef blocks to be completely matched. Fixes: 934e8bccac95 ("mtk-jpegenc: support jpegenc multi-hardware") Fixes: 4ae47770d57b ("media: mtk-jpegenc: Fix a compilation issue") Fixes: da4ede4b7fd6 ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14media: imx-jpeg: Support to assign slot for encoder/decoderMing Qian
imx jpeg encoder and decoder support 4 slots each, aim to support some virtualization scenarios. driver should only enable one slot one time. but due to some hardware issue, only slot 0 can be enabled in imx8q platform, and they may be fixed in imx9 platform. Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14media: amphion: Fix firmware path to match linux-firmwareNicolas Dufresne
The path did not match the one it was submitted into linux-firmware which prevented generic distribution from having working CODEC. Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-14media: amphion: use dev_err_probeAlexander Stein
This simplifies the code and silences -517 error messages. Also the reason is listed in /sys/kernel/debug/devices_deferred. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: ming_qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-05Merge tag 'media/v6.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Lots of improvement at atomisp driver, which is starting to look in good shape - Mediatek vcodec driver has gained support for av1 and hevc stateless codecs - New sensor driver: ov01a10 - verisilicon driver has gained AV1 entropy helpers - tegra-video has gained support for Tegra20 parallel input - dvb core has gained an extra property to better support DVB-S2X - as usual, lots of cleanups, fixes and improvements on media drivers * tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits) media: wl128x: fix a clang warning media: dvb: mb86a20s: get rid of a clang-15 warning media: cec: i2c: ch7322: also select REGMAP media: add HAS_IOPORT dependencies media: tc358746: select CONFIG_GENERIC_PHY media: mediatek: vcodec: Add dbgfs help function media: mediatek: vcodec: Add encode to support dbgfs media: mediatek: vcodec: Change dbgfs interface to support encode media: mediatek: vcodec: Get each instance format type media: mediatek: vcodec: Get each context resolution information media: mediatek: vcodec: Add a debugfs file to get different useful information media: mediatek: vcodec: Add debug params to control different log level media: mediatek: vcodec: Add debugfs interface to get debug information media: mediatek: vcodec: support stateless AV1 decoder media: verisilicon: Conditionally ignore native formats media: verisilicon: Enable AV1 decoder on rk3588 media: verisilicon: Add film grain feature to AV1 driver media: verisilicon: Add Rockchip AV1 decoder media: verisilicon: Add AV1 entropy helpers media: verisilicon: Compute motion vectors size for AV1 frames ...
2023-06-29Merge tag 'fbdev-for-6.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev updates from Helge Deller: "Some fbdev fixes & cleanups. Includes is a fix for a potential out-of-bound memory access in fast_imageblit() and the switch of the VIA fbdev driver to use GPIO descriptors. Summary: - fix potential OOB read in fast_imageblit() - fbdev/media: Use GPIO descriptors for VIA GPIO - broadsheetfb & metronomefb: Add MODULE_FIRMWARE macro - omapfb: error handling fix in mipid_spi_probe() - sh_mobile_lcdcfb, sh7760fb: Typo and warning fixes - hitfb: code cleanups" * tag 'fbdev-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: fix potential OOB read in fast_imageblit() MAINTAINERS: adjust entry in VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER fbdev: sh7760fb: Fix -Wimplicit-fallthrough warnings fbdev: sh_mobile_lcdcfb: Fix ARGB32 overlay format typo fbdev: hitfb: Use NULL for pointers fbdev: hitfb: Fix integer-to-pointer cast fbdev/media: Use GPIO descriptors for VIA GPIO video/hdmi: Reorder fields in 'struct hdmi_avi_infoframe' fbdev: broadsheetfb: Add MODULE_FIRMWARE macro fbdev: metronomefb: Add MODULE_FIRMWARE macro fbdev: hitfb: Declare hitfb_blank() as static fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe()
2023-06-27Merge tag 'wq-for-6.5-cleanup-ordered' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull ordered workqueue creation updates from Tejun Heo: "For historical reasons, unbound workqueues with max concurrency limit of 1 are considered ordered, even though the concurrency limit hasn't been system-wide for a long time. This creates ambiguity around whether ordered execution is actually required for correctness, which was actually confusing for e.g. btrfs (btrfs updates are being routed through the btrfs tree). There aren't that many users in the tree which use the combination and there are pending improvements to unbound workqueue affinity handling which will make inadvertent use of ordered workqueue a bigger loss. This clarifies the situation for most of them by updating the ones which require ordered execution to use alloc_ordered_workqueue(). There are some conversions being routed through subsystem-specific trees and likely a few stragglers. Once they're all converted, workqueue can trigger a warning on unbound + @max_active==1 usages and eventually drop the implicit ordered behavior" * tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues scsi: NCR5380: Use default @max_active for hostdata->work_q media: coda: Use alloc_ordered_workqueue() to create ordered workqueues crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues wifi: mwifiex: Use default @max_active for workqueues wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues greybus: Use alloc_ordered_workqueue() to create ordered workqueues powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
2023-06-19fbdev/media: Use GPIO descriptors for VIA GPIOLinus Walleij
The VIA fbdev exposes a custom GPIO chip for its GPIOs, these are in turn looked up the camera driver using a custom API. Drop the custom API, provide a look-up table and convert to GPIO descriptors. Note proper polarity on the RESET line. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Helge Deller <deller@gmx.de>
2023-06-09media: mediatek: vcodec: Add dbgfs help functionYunfei Dong
Getting dbgfs help information with command "echo -help > vdec" or "echo > vdec". Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: mediatek: vcodec: Add encode to support dbgfsYunfei Dong
Add encode to support dbgfs. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: mediatek: vcodec: Change dbgfs interface to support encodeYunfei Dong
Extend dbgfs init interface to support encode and create encode dbgfs file. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: mediatek: vcodec: Get each instance format typeYunfei Dong
Adding echo command to get capture and output queue format type of each instance:"echo '-format' > vdec", not current hardware supported. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: mediatek: vcodec: Get each context resolution informationYunfei Dong
Will store the string to temp buffer like "echo -picinfo > vdec" when user want to get needed information. Then getting debug information using command 'cat vdec' calling mtk_vdec_dbgfs_read to analysis the temp buffer. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: mediatek: vcodec: Add a debugfs file to get different useful informationYunfei Dong
In oder to get each instance information according to test command, adding one file node "vdec". Can use echo command to set different string value as 'echo -picinfo > vdec'. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: drop unwanted dbgfs_inst NULL ptr check in mtk_vcodec_dbgfs_remove] Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: mediatek: vcodec: Add debug params to control different log levelYunfei Dong
Add parameter mtk_vcodec_dbg to open each codec log. Add parameter mtk_v4l2_dbg_level to open each instance log according to the parameter value. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: add () around 'level' in macro] Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: mediatek: vcodec: Add debugfs interface to get debug informationYunfei Dong
This will be useful when debugging specific issues related to kernel in running status. Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: mediatek: vcodec: support stateless AV1 decoderXiaoyong Lu
Add mediatek av1 decoder linux driver which use the stateless API in MT8195. Signed-off-by: Xiaoyong Lu<xiaoyong.lu@mediatek.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: verisilicon: Conditionally ignore native formatsBenjamin Gaignard
AV1 film grain feature requires to use the postprocessor to produce valid frames. In such case the driver shouldn't propose native pixels format but only post-processed pixels format. Additionally if when setting a control a value could change capture queue pixels formats it is needed to call hantro_reset_raw_fmt(). Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: verisilicon: Enable AV1 decoder on rk3588Benjamin Gaignard
Add rk3588 AV1 decoder to Hantro variant. The hardware support image from 64x64 up to 7680x4320 by steps of 16 pixels. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: verisilicon: Add film grain feature to AV1 driverBenjamin Gaignard
Film grain feature add "old style" grain noise on decoded streams. Grain noise is applied after decoding by the postprocessor. The level of grain is based on gaussian sequence. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: verisilicon: Add Rockchip AV1 decoderBenjamin Gaignard
Implement AV1 stateless decoder for rockchip VPU981. It decode 8 and 10 bits AV1 bitstreams. AV1 scaling feature is done by the postprocessor. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: verisilicon: Add AV1 entropy helpersBenjamin Gaignard
AV1 hardware decoder needs entropy parameters to decode frames. They are computed from various arrays defined in AV1 section "9.4. Default CDF tables". Add helpers functions to init, store and get these parameters. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: verisilicon: Compute motion vectors size for AV1 framesBenjamin Gaignard
Compute the additional space required to store motion vectors at the end of the frames buffers. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: verisilicon: Check AV1 bitstreams bit depthBenjamin Gaignard
The driver supports 8 and 10 bits bitstreams, make sure to discard other cases. It could happens that userland test if V4L2_CID_STATELESS_AV1_SEQUENCE exists without setting bit_depth field in this case use HANTRO_DEFAULT_BIT_DEPTH value. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: verisilicon: Add AV1 decoder mode and controlsBenjamin Gaignard
Add AV1 decoder as new decoder mode to Hantro driver. Register needed AV1 controls for the decoder. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: verisilicon: Get bit depth for V4L2_PIX_FMT_NV15_4L4Benjamin Gaignard
Let's the driver knows that V4L2_PIX_FMT_NV15_4L4 is a 10bits pixel format. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: mediatek: vpu: add missing clk_unprepareHans Verkuil
If vpu_clock_enable() fails, then call clk_unprepare(). This fixes this smatch warning: drivers/media/platform/mediatek/vpu/mtk_vpu.c:1031 mtk_vpu_resume() warn: 'vpu->clk' from clk_prepare() not released on lines: 1020. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: platform: mediatek: vpu: fix NULL ptr dereferenceHans Verkuil
If pdev is NULL, then it is still dereferenced. This fixes this smatch warning: drivers/media/platform/mediatek/vpu/mtk_vpu.c:570 vpu_load_firmware() warn: address of NULL pointer 'pdev' Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: platform: renesas-ceu: drop buf NULL checkHans Verkuil
Since start_streaming is only called if there are at least two buffers queued, the ceudev->capture list will never be empty, so the check whether there are no buffers can be dropped. Note that the '!buf' check was wrong in any case, if we wanted to check for an empty list it should have used list_empty(). This fixes this smatch warning: drivers/media/platform/renesas/renesas-ceu.c:705 ceu_start_streaming() warn: can 'buf' even be NULL? Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: rockchip: rga: fix clock cleanupHans Verkuil
Fix this smatch warning: drivers/media/platform/rockchip/rga/rga.c:734 rga_enable_clocks() warn: 'rga->sclk' from clk_prepare_enable() not released on lines: 734. The reason is that aclk should be disabled/unprepared before sclk, instead of the other way around. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jacob Chen <jacob-chen@iotwrt.com> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: provide ctx queue lock for ioctl synchronizationSergey Senozhatsky
Video device has to provide a lock so that __video_do_ioctl() can serialize IOCTL calls. Introduce a dedicated venus_inst mutex for the purpose of vb2 operations synchronization. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: return P010 as preferred format for 10 bit decodeDikshita Agarwal
If bit depth is detected as 10 bit by firmware, return P010 as preferred decoder format to the client. Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: add handling of bit depth change from firmwareDikshita Agarwal
Set opb format to TP10_UWC and dpb to client set format when bit depth change to 10 bit is detecting by firmware. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: update calculation for dpb buffersDikshita Agarwal
Use dpb color format, width and height of output port for calculating buffer size of dpb buffers. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: add support for V4L2_PIX_FMT_P010 color formatDikshita Agarwal
add V4L2_PIX_FMT_P010 as supported color format for decoder. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: replace arrary index with enum for supported formatsDikshita Agarwal
Use enums to list supported formats for encoder and decoder instead of array index which was a error prone design. Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: fix EOS handling in decoder stop commandDikshita Agarwal
Use firmware version based check to assign correct device address for EOS buffer to fix the EOS handling with different firmware version. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Nathan Hebert <nhebert@chromium.org> Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: enable sufficient sequence change support for vp9Dikshita Agarwal
VP9 supports resolution change at interframe. Currenlty, if sequence change is detected at interframe and resources are sufficient, sequence change event is not raised by firmware to driver until the next keyframe. This change add the HFI to notify the sequence change in this case to driver. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Nathan Hebert <nhebert@chromium.org> Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: add firmware version based checkDikshita Agarwal
Add firmware version based checks to enable/disable features for different SOCs. Tested-by: Nathan Hebert <nhebert@chromium.org> Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Viswanath Boma <quic_vboma@quicinc.com> Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: hfi_cmds: Use struct_size() helperGustavo A. R. Silva
Prefer struct_size() over open-coded versions of idiom: sizeof(struct-with-flex-array) + sizeof(typeof-flex-array-elements) * count where count is the max number of items the flexible array is supposed to contain. Link: https://github.com/KSPP/linux/issues/160 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: hfi_cmds: Replace one-element array with flexible-array memberGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element arrays with flexible-array members in struct hfi_session_set_buffers_pkt, and refactor the rest of the code, accordingly. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/292 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: Replace one-element arrays with flexible-array membersGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element arrays with flexible-array members in multiple structures, and refactor the rest of the code, accordingly. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/291 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: hfi_cmds: Replace fake flex-array with flexible-array memberGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element arrays with flexible-array members in struct hfi_sys_set_resource_pkt, and refactor the rest of the code, accordingly. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. The only binary differences seen before/after changes are the following: 17ba: mov %rbx,%rdi 17bd: call 17c2 <pkt_sys_set_resource+0x42> 17be: R_X86_64_PLT32 __tsan_write4-0x4 - 17c2: movl $0x14,(%rbx) + 17c2: movl $0x10,(%rbx) 17c8: lea 0x4(%rbx),%rdi 17cc: call 17d1 <pkt_sys_set_resource+0x51> 17cd: R_X86_64_PLT32 __tsan_write4-0x4 which is expected once this accounts for the following line of code at drivers/media/platform/qcom/venus/hfi_cmds.c:73 73 pkt->hdr.size = sizeof(*pkt); and as *pkt is of type struct hfi_sys_set_resource_pkt, sizeof(*pkt) is reduced by 4 bytes, due to the flex-array transformation. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/293 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: helpers: Fix ALIGN() of non power of twoRikard Falkeborn
ALIGN() expects its second argument to be a power of 2, otherwise incorrect results are produced for some inputs. The output can be both larger or smaller than what is expected. For example, ALIGN(304, 192) equals 320 instead of 384, and ALIGN(65, 192) equals 256 instead of 192. However, nestling two ALIGN() as is done in this case seem to only produce results equal to or bigger than the expected result if ALIGN() had handled non powers of two, and that in turn results in framesizes that are either the correct size or too large. Fortunately, since 192 * 4 / 3 equals 256, it turns out that one ALIGN() is sufficient. Fixes: ab1eda449c6e ("media: venus: vdec: handle 10bit bitstreams") Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: simplify the return expression of venus_sys_set_* functionLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09media: venus: simplify the return expression of session_process_buf()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-06-09Merge tag 'v6.4-rc5' into media_stageMauro Carvalho Chehab
Linux 6.4-rc5 * tag 'v6.4-rc5': (919 commits) Linux 6.4-rc5 leds: qcom-lpg: Fix PWM period limits selftests/ftrace: Choose target function for filter test from samples KVM: selftests: Add test for race in kvm_recalculate_apic_map() KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds KVM: x86: Account fastpath-only VM-Exits in vCPU stats KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker tpm, tpm_tis: correct tpm_tis_flags enumeration values Revert "ext4: remove ac->ac_found > sbi->s_mb_min_to_scan dead check in ext4_mb_check_limits" media: uvcvideo: Don't expose unsupported formats to userspace media: v4l2-subdev: Fix missing kerneldoc for client_caps media: staging: media: imx: initialize hs_settle to avoid warning media: v4l2-mc: Drop subdev check in v4l2_create_fwnode_links_to_pad() riscv: Implement missing huge_ptep_get riscv: Fix huge_ptep_set_wrprotect when PTE is a NAPOT module/decompress: Fix error checking on zstd decompression fork, vhost: Use CLONE_THREAD to fix freezer/ps regression dt-bindings: serial: 8250_omap: add rs485-rts-active-high selinux: don't use make's grouped targets feature yet ...
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-30 18:57:40 +0000