summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/amd
AgeCommit message (Collapse)Author
2023-06-27pds_core: use vmalloc_array and vcallocJulia Lawall
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-10-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-13amd-xgbe: extend 10Mbps support to MAC version 21HRaju Rangoju
MAC version 21H supports the 10Mbps speed. So, extend support to platforms that support it. Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-06pds_core: Fix FW recovery detectionBrett Creeley
Commit 523847df1b37 ("pds_core: add devcmd device interfaces") included initial support for FW recovery detection. Unfortunately, the ordering in pdsc_is_fw_good() was incorrect, which was causing FW recovery to be undetected by the driver. Fix this by making sure to update the cached fw_status by calling pdsc_is_fw_running() before setting the local FW gen. Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230605195116.49653-1-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-26amd-xgbe: fix the false linkup in xgbe_phy_statusRaju Rangoju
In the event of a change in XGBE mode, the current auto-negotiation needs to be reset and the AN cycle needs to be re-triggerred. However, the current code ignores the return value of xgbe_set_mode(), leading to false information as the link is declared without checking the status register. Fix this by propagating the mode switch status information to xgbe_phy_status(). Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-17net: isa: include net/Space.hArnd Bergmann
The legacy drivers that still get called from net/Space.c have prototypes in net/Space, but this header is not included in most of the files that define those functions: drivers/net/ethernet/cirrus/cs89x0.c:1649:28: error: no previous prototype for 'cs89x0_probe' [-Werror=missing-prototypes] drivers/net/ethernet/8390/ne.c:947:28: error: no previous prototype for 'ne_probe' [-Werror=missing-prototypes] drivers/net/ethernet/8390/smc-ultra.c:167:28: error: no previous prototype for 'ultra_probe' [-Werror=missing-prototypes] drivers/net/ethernet/amd/lance.c:438:28: error: no previous prototype for 'lance_probe' [-Werror=missing-prototypes] drivers/net/ethernet/3com/3c515.c:422:20: error: no previous prototype for 'tc515_probe' [-Werror=missing-prototypes] Add the inclusion to avoids the warnings. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230516194625.549249-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-05pds_core: fix mutex double unlock in error pathShannon Nelson
Fix a double unlock in an error handling path by unlocking as soon as the error is seen and removing unlocks in the error cleanup path. Link: https://lore.kernel.org/kernel-janitors/209a09f6-5ec6-40c7-a5ec-6260d8f54d25@kili.mountain/ Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-03pds_core: add AUXILIARY_BUS and NET_DEVLINK to KconfigShannon Nelson
Add selecting of AUXILIARY_BUS and NET_DEVLINK to the pds_core Kconfig. Link: https://lore.kernel.org/netdev/ZE%2FduNH3lBLreNkJ@corigine.com/ Fixes: ddbcb22055d1 ("pds_core: Kconfig and pds_core.rst") Suggested-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-03pds_core: remove CONFIG_DEBUG_FS from makefileShannon Nelson
This cruft from previous drafts should have been removed when the code was updated to not use the old style dummy helpers. Fixes: 55435ea7729a ("pds_core: initial framework for pds_core PF driver") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-25net: amd: Fix link leak when verifying config failedGencen Gan
After failing to verify configuration, it returns directly without releasing link, which may cause memory leak. Paolo Abeni thinks that the whole code of this driver is quite "suboptimal" and looks unmainatained since at least ~15y, so he suggests that we could simply remove the whole driver, please take it into consideration. Simon Horman suggests that the fix label should be set to "Linux-2.6.12-rc2" considering that the problem has existed since the driver was introduced and the commit above doesn't seem to exist in net/net-next. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Gan Gecen <gangecen@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: Kconfig and pds_core.rstShannon Nelson
Remaining documentation and Kconfig hook for building the driver. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: publish events to the clientsShannon Nelson
When the Core device gets an event from the device, or notices the device FW to be up or down, it needs to send those events on to the clients that have an event handler. Add the code to pass along the events to the clients. The entry points pdsc_register_notify() and pdsc_unregister_notify() are EXPORTed for other drivers that want to listen for these events. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add the aux client APIShannon Nelson
Add the client API operations for running adminq commands. The core registers the client with the FW, then the client has a context for requesting adminq services. We expect to add additional operations for other clients, including requesting additional private adminqs and IRQs, but don't have the need yet. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: devlink params for enabling VIF supportShannon Nelson
Add the devlink parameter switches so the user can enable the features supported by the VFs. The only feature supported at the moment is vDPA. Example: devlink dev param set pci/0000:2b:00.0 \ name enable_vnet cmode runtime value true Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add auxiliary_bus devicesShannon Nelson
An auxiliary_bus device is created for each vDPA type VF at VF probe and destroyed at VF remove. The aux device name comes from the driver name + VIF type + the unique id assigned at PCI probe. The VFs are always removed on PF remove, so there should be no issues with VFs trying to access missing PF structures. The auxiliary_device names will look like "pds_core.vDPA.nn" where 'nn' is the VF's uid. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add initial VF device handlingShannon Nelson
This is the initial VF PCI driver framework for the new pds_vdpa VF device, which will work in conjunction with an auxiliary_bus client of the pds_core driver. This does the very basics of registering for the new VF device, setting up debugfs entries, and registering with devlink. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: set up the VIF definitions and defaultsShannon Nelson
The Virtual Interfaces (VIFs) supported by the DSC's configuration (vDPA, Eth, RDMA, etc) are reported in the dev_ident struct and made visible in debugfs. At this point only vDPA is supported in this driver so we only setup devices for that feature. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add FW update feature to devlinkShannon Nelson
Add in the support for doing firmware updates. Of the two main banks available, a and b, this updates the one not in use and then selects it for the next boot. Example: devlink dev flash pci/0000:b2:00.0 \ file pensando/dsc_fw_1.63.0-22.tar Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: Add adminq processing and commandsShannon Nelson
Add the service routines for submitting and processing the adminq messages and for handling notifyq events. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: set up device and adminqShannon Nelson
Set up the basic adminq and notifyq queue structures. These are used mostly by the client drivers for feature configuration. These are essentially the same adminq and notifyq as in the ionic driver. Part of this includes querying for device identity and FW information, so we can make that available to devlink dev info. $ devlink dev info pci/0000:b5:00.0 pci/0000:b5:00.0: driver pds_core serial_number FLM18420073 versions: fixed: asic.id 0x0 asic.rev 0x0 running: fw 1.51.0-73 stored: fw.goldfw 1.15.9-C-22 fw.mainfwa 1.60.0-73 fw.mainfwb 1.60.0-57 Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add devlink health facilitiesShannon Nelson
Add devlink health reporting on top of our fw watchdog. Example: # devlink health show pci/0000:2b:00.0 reporter fw pci/0000:2b:00.0: reporter fw state healthy error 0 recover 0 # devlink health diagnose pci/0000:2b:00.0 reporter fw Status: healthy State: 1 Generation: 0 Recoveries: 0 Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: health timer and workqueueShannon Nelson
Add in the periodic health check and the related workqueue, as well as the handlers for when a FW reset is seen. The firmware is polled every 5 seconds to be sure that it is still alive and that the FW generation didn't change. The alive check looks to see that the PCI bus is still readable and the fw_status still has the RUNNING bit on. If not alive, the driver stops activity and tears things down. When the FW recovers and the alive check again succeeds, the driver sets back up for activity. The generation check looks at the fw_generation to see if it has changed, which can happen if the FW crashed and recovered or was updated in between health checks. If changed, the driver counts that as though the alive test failed and forces the fw_down/fw_up cycle. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: add devcmd device interfacesShannon Nelson
The devcmd interface is the basic connection to the device through the PCI BAR for low level identification and command services. This does the early device initialization and finds the identity data, and adds devcmd routines to be used by later driver bits. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-21pds_core: initial framework for pds_core PF driverShannon Nelson
This is the initial PCI driver framework for the new pds_core device driver and its family of devices. This does the very basics of registering for the new PF PCI device 1dd8:100c, setting up debugfs entries, and registering with devlink. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-06amd-xgbe: fix mismatched prototypeArnd Bergmann
The forward declaration was introduced with a prototype that does not match the function definition: drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd, enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch] 2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int, unsigned int)' 391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Ideally there should not be any forward declarations here, which would make it easier to show that there is no unbounded recursion. I tried fixing this but could not figure out how to avoid the recursive call. As a hotfix, address only the broken prototype to fix the build problem instead. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20230203121553.2871598-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02amd-xgbe: add support for rx-adaptationRaju Rangoju
The existing implementation for non-Autonegotiation 10G speed modes does not enable RX adaptation in the Driver and FW. The RX Equalization settings (AFE settings alone) are manually configured and the existing link-up sequence in the driver does not perform rx adaptation process as mentioned in the Synopsys databook. There's a customer request for 10G backplane mode without Auto-negotiation and for the DAC cables of more significant length that follow the non-Autonegotiation mode. These modes require PHY to perform RX Adaptation. The proposed logic adds the necessary changes to Yellow Carp devices to ensure seamless RX Adaptation for 10G-SFI (LONG DAC) and 10G-KR without AN (CL72 not present). The RX adaptation core algorithm is executed by firmware, however, to achieve that a new mailbox sub-command is required to be sent by the driver. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-02-02amd-xgbe: add 2.5GbE support to 10G BaseT modeRaju Rangoju
Add support to the driver to fully recognize and enable 2.5GbE speed in 10GBaseT mode. Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/ https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17amd-xgbe: Replace MII_ADDR_C45 with XGBE_ADDR_C45Andrew Lunn
The xgbe driver reuses MII_ADDR_C45 for its own purpose. The values derived with it are never passed to phylib or a linux MDIO bus driver. In order that MII_ADDR_C45 can be removed, add an XGBE specific Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-17amd-xgbe: Separate C22 and C45 transactionsAndrew Lunn
The xgbe MDIO bus driver can perform both C22 and C45 transfers, when using its MDIO bus hardware. The SFP I2C mdio bus driver only supports C22. Create separate functions for each and register the C45 versions using the new API calls where appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12amd-xgbe: Delay AN timeout during KR trainingRaju Rangoju
AN restart triggered during KR training not only aborts the KR training process but also move the HW to unstable state. Driver has to wait upto 500ms or until the KR training is completed before restarting AN cycle. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12amd-xgbe: TX Flow Ctrl Registers are h/w ver dependentRaju Rangoju
There is difference in the TX Flow Control registers (TFCR) between the revisions of the hardware. The older revisions of hardware used to have single register per queue. Whereas, the newer revision of hardware (from ver 30H onwards) have one register per priority. Update the driver to use the TFCR based on the reported version of the hardware. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Co-developed-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Ajith Nayak <Ajith.Nayak@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10amd-xgbe: Add support for 10 Mbps speedRaju Rangoju
Add the necessary changes to support 10 Mbps speed for BaseT and SFP port modes. This is supported in MAC ver >= 30H. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://lore.kernel.org/r/20230109101819.747572-1-Raju.Rangoju@amd.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-30net: amd-xgbe: add missed tasklet_killJiguang Xiao
The driver does not call tasklet_kill in several places. Add the calls to fix it. Fixes: 85b85c853401 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared") Signed-off-by: Jiguang Xiao <jiguang.xiao@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Merge in the left-over fixes before the net-next pull-request. net/mptcp/subflow.c d3295fee3c75 ("mptcp: use proper req destructor for IPv6") 36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-12net: amd-xgbe: Check only the minimum speed for active/passive cablesTom Lendacky
There are cables that exist that can support speeds in excess of 10GbE. The driver, however, restricts the EEPROM advertised nominal bitrate to a specific range, which can prevent usage of cables that can support, for example, up to 25GbE. Rather than checking that an active or passive cable supports a specific range, only check for a minimum supported speed. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-12net: amd-xgbe: Fix logic around active and passive cablesTom Lendacky
SFP+ active and passive cables are copper cables with fixed SFP+ end connectors. Due to a misinterpretation of this, SFP+ active cables could end up not being recognized, causing the driver to fail to establish a connection. Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is the default cable type, and handle active and passive cables when they are specifically detected. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-12net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang
It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In these two cases, dev_kfree_skb() is called consume the xmited SKB, so replace it with dev_consume_skb_irq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-31ptp: xgbe: convert to .adjfine and adjust_by_scaled_ppmJacob Keller
The xgbe implementation of .adjfreq is implemented in terms of a straight forward "base * ppb / 1 billion" calculation. Convert this driver to .adjfine and use adjust_by_scaled_ppm to calculate the new addend value. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-21amd-xgbe: add the bit rate quirk for Molex cablesRaju Rangoju
The offset 12 (bit-rate) of EEPROM SFP DAC (passive) cables is expected to be in the range 0x64 to 0x68. However, the 5 meter and 7 meter Molex passive cables have the rate ceiling 0x78 at offset 12. Add a quirk for Molex passive cables to extend the rate ceiling to 0x78. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21amd-xgbe: fix the SFP compliance codes check for DAC cablesRaju Rangoju
The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive) cables is NULL. However, some cables (the 5 meter and 7 meter Molex passive cables) have non-zero data at offset 6. Fix the logic by moving the passive cable check above the active checks, so as not to be improperly identified as an active cable. This will fix the issue for any passive cable that advertises 1000Base-CX in offset 6. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21amd-xgbe: enable PLL_CTL for fixed PHY modes onlyRaju Rangoju
PLL control setting(RRC) is needed only in fixed PHY configuration to fix the peer-peer issues. Without the PLL control setting, the link up takes longer time in a fixed phy configuration. Driver implements SW RRC for Autoneg On configuration, hence PLL control setting (RRC) is not needed for AN On configuration, and can be skipped. Also, PLL re-initialization is not needed for PHY Power Off and RRC commands. Otherwise, they lead to mailbox errors. Added the changes accordingly. Fixes: daf182d360e5 ("net: amd-xgbe: Toggle PLL settings during rate change") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21amd-xgbe: use enums for mailbox cmd and sub_cmdsRaju Rangoju
Instead of using hardcoded values, use enumerations for mailbox command and sub commands. Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21amd-xgbe: Yellow carp devices do not need rrcRaju Rangoju
Link stability issues are noticed on Yellow carp platforms when Receiver Reset Cycle is issued. Since the CDR workaround is disabled on these platforms, the Receiver Reset Cycle is not needed. So, avoid issuing rrc on Yellow carp platforms. Fixes: dbb6c58b5a61 ("net: amd-xgbe: Add Support for Yellow Carp Ethernet device") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-16net: amd: Switch and case should be at the same indentGuofeng Yue
Cleaning some static warnings of indent. Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: amd: Correct spelling errorsGuofeng Yue
Find some spelling errors: interupts --> interrupts lenth --> length stoped --> stopped contoller --> controller Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: amd: Unified the comparison between pointers and NULL to the same writingGuofeng Yue
Using the unified way to compare pointers and NULL, which cleans the static warning. eg: if (skb == NULL) --> if (!skb） if (skb != NULL) --> if (skb) Signed-off-by: Guofeng Yue <yueguofeng@hisilicon.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: amd8111e: remove repeated dev->features assignementJian Shen
It's repeated with line 1793-1795, and there isn't any other handling for it. So remove it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Link: https://lore.kernel.org/r/20220719142424.4528-1-shenjian15@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-28 03:27:39 +0000