summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e
AgeCommit message (Collapse)Author
2021-07-21i40e: add support for PTP external synchronization clockPiotr Kwapulinski
Add support for external synchronization clock via GPIOs. 1PPS signals are handled via the dedicated 3 GPIOs: SDP3_2, SDP3_3 and GPIO_4. Previously it was not possible to use the external PTP synchronization clock. All possible HW configurations are supported. SDP3_2, SDP3_3, GPIO_4 off, off, off off, in_A, off off, out_A, off off, in_B, off off, out_B, off in_A, off, off in_A, in_B, off in_A, out_B, off out_A, off, off out_A, in_B, off in_B, off, off in_B, in_A, off in_B, out_A, off out_B, off, off out_B, in_A, off off, off, in_A off, out_A, in_A off, in_B, in_A off, out_B, in_A out_A, off, in_A out_A, in_B, in_A in_B, off, in_A in_B, out_A, in_A out_B, off, in_A off, off, out_A off, in_A, out_A off, in_B, out_A off, out_B, out_A in_A, off, out_A in_A, in_B, out_A in_A, out_B, out_A in_B, off, out_A in_B, in_A, out_A out_B, off, out_A out_B, in_A, out_A off, off, in_B off, in_A, in_B off, out_A, in_B off, out_B, in_B in_A, off, in_B in_A, out_B, in_B out_A, off, in_B out_B, off, in_B out_B, in_A, in_B off, off, out_B off, in_A, out_B off, out_A, out_B off, in_B, out_B in_A, off, out_B in_A, in_B, out_B out_A, off, out_B out_A, in_B, out_B in_B, off, out_B in_B, in_A, out_B in_B, out_A, out_B Tested with oscilloscope, 1PPS generator and ts2phc. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Tested-by: Ashish K <ashishx.k@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-19i40e: improve locking of mac_filter_hashStefan Assmann
i40e_config_vf_promiscuous_mode() calls i40e_getnum_vf_vsi_vlan_filters() without acquiring the mac_filter_hash_lock spinlock. This is unsafe because mac_filter_hash may get altered in another thread while i40e_getnum_vf_vsi_vlan_filters() traverses the hashes. Simply adding the spinlock in i40e_getnum_vf_vsi_vlan_filters() is not possible as it already gets called in i40e_get_vlan_list_sync() with the spinlock held. Therefore adding a wrapper that acquires the spinlock and call the correct function where appropriate. Fixes: 37d318d7805f ("i40e: Remove scheduling while atomic possibility") Fix-suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This contains a replacement driver for Intel iWarp hardware. This new driver supports the old ethernet hardware and also newer chips that can do ROCE. Other than that, this contains the typical mix of patches: - Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5 - Many static checker driven code clean ups, including a wide refcount_t conversion - Several series for the hns driver, more HIP09 HW capabilities, migration to new HW register manipulators, and code cleanups - Minor fixes and improvements in srp, rts, and cm - Improvements throughout for sysfs related code to use DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use sysfs APIs properly - Intel's new irdma driver replacing i40iw - rxe general clean ups and Memory Window support" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits) RDMA/core: Always release restrack object RDMA/mlx5: Don't access NULL-cleared mpi pointer RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles RDMA/irdma: Check contents of user-space irdma_mem_reg_req object RDMA/rxe: Missing unlock on error in get_srq_wqe() RDMA/cma: Fix rdma_resolve_route() memory leak RDMA/core/sa_query: Remove unused argument RDMA/cma: Fix incorrect Packet Lifetime calculation RDMA/cma: Protect RMW with qp_mutex RDMA/cma: Remove unnecessary INIT->INIT transition RDMA/hns: Add window selection field of congestion control RDMA/hfi1: Remove use of kmap() RDMA/irdma: Remove use of kmap() RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1 IB/isert: Align target max I/O size to initiator size RDMA/hns: Fix incorrect vlan enable bit in QPC MAINTAINERS: Update Broadcom RDMA maintainers RDMA/irdma: Use the queried port attributes RDMA/rxe: Fix redundant skb_put_zero RDMA/rxe: Fix extra copy in prepare_ack_packet ...
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 12 day(s) which contain a total of 56 files changed, 394 insertions(+), 380 deletions(-). The main changes are: 1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney. 2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski. 3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev. 4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria. 5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards. 6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa. 7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi. 8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim. 9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young. 10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer. 11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski. 12) Fix up bpfilter startup log-level to info level, from Gary Lin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24i40e: Fix missing rtnl locking when setting up pf switchJan Sokolowski
A recent change that made i40e use new udp_tunnel infrastructure uses a method that expects to be called under rtnl lock. However, not all codepaths do the lock prior to calling i40e_setup_pf_switch. Fix that by adding additional rtnl locking and unlocking. Fixes: 40a98cb6f01f ("i40e: convert to new udp_tunnel infrastructure") Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-24i40e: fix PTP on 5Gb linksJesse Brandeburg
As reported by Alex Sergeev, the i40e driver is incrementing the PTP clock at 40Gb speeds when linked at 5Gb. Fix this bug by making sure that the right multiplier is selected when linked at 5Gb. Fixes: 3dbdd6c2f70a ("i40e: Add support for 5Gbps cards") Cc: stable@vger.kernel.org Reported-by: Alex Sergeev <asergeev@carbonrobotics.com> Suggested-by: Alex Sergeev <asergeev@carbonrobotics.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-24intel: Remove rcu_read_lock() around XDP program invocationToke Høiland-Jørgensen
The Intel drivers all have rcu_read_lock()/rcu_read_unlock() pairs around XDP program invocations. However, the actual lifetime of the objects referred by the XDP program invocation is longer, all the way through to the call to xdp_do_flush(), making the scope of the rcu_read_lock() too small. This turns out to be harmless because it all happens in a single NAPI poll cycle (and thus under local_bh_disable()), but it makes the rcu_read_lock() misleading. Rather than extend the scope of the rcu_read_lock(), just get rid of it entirely. With the addition of RCU annotations to the XDP_REDIRECT map types that take bh execution into account, lockdep even understands this to be safe, so there's really no reason to keep it around. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> # i40e Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: intel-wired-lan@lists.osuosl.org Link: https://lore.kernel.org/bpf/20210624160609.292325-12-toke@redhat.com
2021-06-24i40e: Fix autoneg disabling for non-10GBaseT linksMateusz Palczewski
Disabling autonegotiation was allowed only for 10GBaseT PHY. The condition was changed to check if link media type is BaseT. Fixes: 3ce12ee9d8f9 ("i40e: Fix order of checks when enabling/disabling autoneg in ethtool") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Karen Sornek <karen.sornek@intel.com> Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-24i40e: Fix error handling in i40e_vsi_openDinghao Liu
When vsi->type == I40E_VSI_FDIR, we have caught the return value of i40e_vsi_request_irq() but without further handling. Check and execute memory clean on failure just like the other i40e_vsi_request_irq(). Fixes: 8a9eb7d3cbcab ("i40e: rework fdir setup and teardown") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-22Merge tag 'v5.13-rc7' into rdma.git for-nextJason Gunthorpe
Linux 5.13-rc7 Needed for dependencies in following patches. Merge conflict in rxe_cmop.c resolved by compining both patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-18i40e: clean up packet type lookup tableJesse Brandeburg
Remove the unused ptype struct value, which makes table init easier for the zero entries, and use ranged initializer to remove a bunch of code (works with gcc and clang). There is no significant functional change. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-07Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-03i40e: add correct exception tracing for XDPMagnus Karlsson
Add missing exception tracing to XDP when a number of different errors can occur. The support was only partial. Several errors where not logged which would confuse the user quite a lot not knowing where and why the packets disappeared. Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action") Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-06-02RDMA/irdma: Add irdma Kconfig/Makefile and remove i40iwShiraz Saleem
Add Kconfig and Makefile to build irdma driver. Remove i40iw driver and add an alias in irdma. Remove legacy exported symbols i40e_register_client and i40e_unregister_client from i40e as they are no longer used. irdma is the replacement driver that supports X722. Link: https://lore.kernel.org/r/20210602205138.889-16-shiraz.saleem@intel.com Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-05-28i40e: Register auxiliary devices to provide RDMAShiraz Saleem
Convert i40e to use the auxiliary bus infrastructure to export the RDMA functionality of the device to the RDMA driver. Register i40e client auxiliary RDMA device on the auxiliary bus per PCIe device function for the new auxiliary rdma driver (irdma) to attach to. The global i40e_register_client and i40e_unregister_client symbols will be obsoleted once irdma replaces i40iw in the kernel for the X722 device. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26i40e: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct i40e_qvlist_info instead of one-element array, and use the struct_size() helper. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: Remove LLDP frame filtersArkadiusz Kubalewski
Remove filters from being setup in case of software DCB and allow the LLDP frames to be properly transmitted to the wire. It is not possible to transmit the LLDP frame out of the port, if they are filtered by control VSI. This prohibits software LLDP agent properly communicate its DCB capabilities to the neighbors. Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: Fix PHY type identifiers for 2.5G and 5G adaptersMateusz Palczewski
Unlike other supported adapters, 2.5G and 5G use different PHY type identifiers for reading/writing PHY settings and for reading link status. This commit introduces separate PHY identifiers for these two operation types. Fixes: 2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: fix the restart auto-negotiation after FEC modifiedJaroslaw Gawin
When FEC mode was changed the link didn't know it because the link was not reset and new parameters were not negotiated. Set a flag 'I40E_AQ_PHY_ENABLE_ATOMIC_LINK' in 'abilities' to restart the link and make it run with the new settings. Fixes: 1d96340196f1 ("i40e: Add support FEC configuration for Fortville 25G") Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: Fix use-after-free in i40e_client_subtask()Yunjian Wang
Currently the call to i40e_client_del_instance frees the object pf->cinst, however pf->cinst->lan_info is being accessed after the free. Fix this by adding the missing return. Addresses-Coverity: ("Read from pointer after free") Fixes: 7b0b1a6d0ac9 ("i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: fix broken XDP supportMagnus Karlsson
Commit 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") broke XDP support in the i40e driver. That commit was fixing a sparse error in the code by introducing a new variable xdp_res instead of overloading this into the skb pointer. The problem is that the code later uses the skb pointer in if statements and these where not extended to also test for the new xdp_res variable. Fix this by adding the correct tests for xdp_res in these places. The skb pointer was used to store the result of the XDP program by overloading the results in the error pointer ERR_PTR(-result). Therefore, the allocation failure test that used to only test for !skb now need to be extended to also consider !xdp_res. i40e_cleanup_headers() had a check that based on the skb value being an error pointer, i.e. a result from the XDP program != XDP_PASS, and if so start to process a new packet immediately, instead of populating skb fields and sending the skb to the stack. This check is not needed anymore, since we have added an explicit test for xdp_res being set and if so just do continue to pick the next packet from the NIC. Fixes: 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal admin queue for kdumpCoiby Xu
The minimum size of admin send/receive queue is 1 and 2 respectively. The admin send queue can't be set to 1 because in that case, the firmware would fail to init. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal Rx and Tx ring buffers for kdumpCoiby Xu
Use the minimum of the number of descriptors thus we will allocate the minimal ring buffers for kdump. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: use minimal Tx and Rx pairs for kdumpCoiby Xu
Set the number of the MSI-X vectors to 1. When MSI-X is enabled, it's not allowed to use more TC queue pairs than MSI-X vectors (pf->num_lan_msix) exist. Thus the number of Tx and Rx pairs (vsi->num_queue_pairs) will be equal to the number of MSI-X vectors, i.e., 1. Signed-off-by: Coiby Xu <coxu@redhat.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-23i40e: refactor repeated link state reporting codeAleksandr Loktionov
Refactor repeated link state reporting code into a separate helper functions: i40e_set_vf_link_state() i40e_vc_link_speed2mbps(). Add support of VIRTCHNL_VF_CAP_ADV_LINK_SPEED; Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c - keep the ZC code, drop the code related to reinit net/bridge/netfilter/ebtables.c - fix build after move to net_generic Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-15i40e: fix the panic when running bpf in xdpdrv modeJason Xing
Fix this panic by adding more rules to calculate the value of @rss_size_max which could be used in allocating the queues when bpf is loaded, which, however, could cause the failure and then trigger the NULL pointer of vsi->rx_rings. Prio to this fix, the machine doesn't care about how many cpus are online and then allocates 256 queues on the machine with 32 cpus online actually. Once the load of bpf begins, the log will go like this "failed to get tracking for 256 queues for VSI 0 err -12" and this "setup of MAIN VSI failed". Thus, I attach the key information of the crash-log here. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 0010:i40e_xdp+0xdd/0x1b0 [i40e] Call Trace: [2160294.717292] ? i40e_reconfig_rss_queues+0x170/0x170 [i40e] [2160294.717666] dev_xdp_install+0x4f/0x70 [2160294.718036] dev_change_xdp_fd+0x11f/0x230 [2160294.718380] ? dev_disable_lro+0xe0/0xe0 [2160294.718705] do_setlink+0xac7/0xe70 [2160294.719035] ? __nla_parse+0xed/0x120 [2160294.719365] rtnl_newlink+0x73b/0x860 Fixes: 41c445ff0f48 ("i40e: main driver core") Co-developed-by: Shujin Li <lishujin@kuaishou.com> Signed-off-by: Shujin Li <lishujin@kuaishou.com> Signed-off-by: Jason Xing <xingwanli@kuaishou.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-08i40e: Fix sparse warning: missing error code 'err'Arkadiusz Kubalewski
Set proper return values inside error checking if-statements. Previously following warning was produced when compiling against sparse. i40e_main.c:15162 i40e_init_recovery_mode() warn: missing error code 'err' Fixes: 4ff0ee1af0169 ("i40e: Introduce recovery mode support") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse error: 'vsi->netdev' could be nullArkadiusz Kubalewski
Remove vsi->netdev->name from the trace. This is redundant information. With the devinfo trace, the adapter is already identifiable. Previously following error was produced when compiling against sparse. i40e_main.c:2571 i40e_sync_vsi_filters() error: we previously assumed 'vsi->netdev' could be null (see line 2323) Fixes: b603f9dc20af ("i40e: Log info when PF is entering and leaving Allmulti mode.") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse error: uninitialized symbol 'ring'Arkadiusz Kubalewski
Init pointer with NULL in default switch case statement. Previously the error was produced when compiling against sparse. i40e_debugfs.c:582 i40e_dbg_dump_desc() error: uninitialized symbol 'ring'. Fixes: 44ea803e2fa7 ("i40e: introduce new dump desc XDP command") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix sparse errors in i40e_txrx.cArkadiusz Kubalewski
Remove error handling through pointers. Instead use plain int to return value from i40e_run_xdp(...). Previously: - sparse errors were produced during compilation: i40e_txrx.c:2338 i40e_run_xdp() error: (-2147483647) too low for ERR_PTR i40e_txrx.c:2558 i40e_clean_rx_irq() error: 'skb' dereferencing possible ERR_PTR() - sk_buff* was used to return value, but it has never had valid pointer to sk_buff. Returned value was always int handled as a pointer. Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Fixes: 2e6893123830 ("i40e: split XDP_TX tail and XDP_REDIRECT map flushing") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-08i40e: Fix parameters in aq_get_phy_register()Grzegorz Siwik
Change parameters order in aq_get_phy_register() due to wrong statistics in PHY reported by ethtool. Previously all PHY statistics were exactly the same for all interfaces Now statistics are reported correctly - different for different interfaces Fixes: 0514db37dd78 ("i40e: Extend PHY access with page change flag") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01i40e: Fix display statistics for veb_tcEryk Rybak
If veb-stats was enabled, the ethtool stats triggered a warning due to invalid size: 'unexpected stat size for veb.tc_%u_tx_packets'. This was due to an incorrect structure definition for the statistics. Structures and functions have been improved in line with requirements for the presentation of statistics, in particular for the functions: 'i40e_add_ethtool_stats' and 'i40e_add_stat_strings'. Fixes: 1510ae0be2a4 ("i40e: convert VEB TC stats to use an i40e_stats array") Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01i40e: fix receiving of single packets in xsk zero-copy modeMagnus Karlsson
Fix so that single packets are received immediately instead of in batches of 8. If you sent 1 pps to a system, you received 8 packets every 8 seconds instead of 1 packet every second. The problem behind this was that the work_done reporting from the Tx part of the driver was broken. The work_done reporting in i40e controls not only the reporting back to the napi logic but also the setting of the interrupt throttling logic. When Tx or Rx reports that it has more to do, interrupts are throttled or coalesced and when they both report that they are done, interrupts are armed right away. If the wrong work_done value is returned, the logic will start to throttle interrupts in a situation where it should have just enabled them. This leads to the undesired batching behavior seen in user-space. Fix this by returning the correct boolean value from the Tx xsk zero-copy path. Return true if there is nothing to do or if we got fewer packets to process than we asked for. Return false if we got as many packets as the budget since there might be more packets we can process. Fixes: 3106c580fb7c ("i40e: Use batched xsk Tx interfaces to increase performance") Reported-by: Sreedevi Joshi <sreedevi.joshi@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-01i40e: Fix inconsistent indentingArkadiusz Kubalewski
Fixed new static analysis findings: "warn: inconsistent indenting" - introduced lately, reported with lkp and smatch build. Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-30net: i40e: remove repeated wordsPeng Li
Remove repeated words "to" and "try". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-03-24 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 15 day(s) which contain a total of 65 files changed, 3200 insertions(+), 738 deletions(-). The main changes are: 1) Static linking of multiple BPF ELF files, from Andrii. 2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo. 3) Spelling fixes from various folks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-25i40e: Fix oops at i40e_rebuild()Arkadiusz Kubalewski
Setup TC before the i40e_setup_pf_switch() call. Memory must be initialized for all the queues before using its resources. Previously it could be possible that a call: xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev, rx_ring->queue_index, rx_ring->q_vector->napi.napi_id); was made with q_vector being null. Oops could show up with the following sequence: - no driver loaded - FW LLDP agent is on (flag disable-fw-lldp:off) - link is up - DCB configured with number of Traffic Classes that will not divide completely the default number of queues (usually cpu cores) - driver load - set private flag: disable-fw-lldp:on Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB") Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25i40e: Fix kernel oops when i40e driver removes VF'sEryk Rybak
Fix the reason of kernel oops when i40e driver removed VFs. Added new __I40E_VFS_RELEASING state to signalize releasing process by PF, that it makes possible to exit of reset VF procedure. Without this patch, it is possible to suspend the VFs reset by releasing VFs resources procedure. Retrying the reset after the timeout works on the freed VF memory causing a kernel oops. Fixes: d43d60e5eb95 ("i40e: ensure reset occurs when disabling VF") Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25i40e: Added Asym_Pause to supported link modesMateusz Palczewski
Add Asym_Pause to supported link modes (it is supported by HW). Lack of Asym_Pause in supported modes can cause several problems, i.e. it won't be possible to turn the autonegotiation on with asymmetric pause settings (i.e. Tx on, Rx off). Fixes: 4e91bcd5d47a ("i40e: Finish implementation of ethtool get settings") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-23intel: clean up mismatched header commentsJesse Brandeburg
A bunch of header comments were showing warnings when compiling with W=1. Fix them all at once. This changes only comments. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-18bpf, devmap: Move drop error path to devmap for XDP_REDIRECTLorenzo Bianconi
We want to change the current ndo_xdp_xmit drop semantics because it will allow us to implement better queue overflow handling. This is working towards the larger goal of a XDP TX queue-hook. Move XDP_REDIRECT error path handling from each XDP ethernet driver to devmap code. According to the new APIs, the driver running the ndo_xdp_xmit pointer, will break tx loop whenever the hw reports a tx error and it will just return to devmap caller the number of successfully transmitted frames. It will be devmap responsibility to free dropped frames. Move each XDP ndo_xdp_xmit capable driver to the new APIs: - veth - virtio-net - mvneta - mvpp2 - socionext - amazon ena - bnxt - freescale (dpaa2, dpaa) - xen-frontend - qede - ice - igb - ixgbe - i40e - mlx5 - ti (cpsw, cpsw-new) - tun - sfc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/bpf/ed670de24f951cfd77590decf0229a0ad7fd12f6.1615201152.git.lorenzo@kernel.org
2021-03-17intel: Update drivers to use ethtool_sprintfAlexander Duyck
Update the Intel drivers to make use of ethtool_sprintf. The general idea is to reduce code size and overhead by replacing the repeated pattern of string printf statements and ETH_STRING_LEN counter increments. Signed-off-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-15i40e: optimize for XDP_REDIRECT in xsk pathMagnus Karlsson
Optimize i40e_run_xdp_zc() for the XDP program verdict being XDP_REDIRECT in the xsk zero-copy path. This path is only used when having AF_XDP zero-copy on and in that case most packets will be directed to user space. This provides a little over 100k extra packets in throughput on my server when running l2fwd in xdpsock. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-12i40e: move headroom initialization to i40e_configure_rx_ringMaciej Fijalkowski
i40e_rx_offset(), that is supposed to initialize the Rx buffer headroom, relies on I40E_RXR_FLAGS_BUILD_SKB_ENABLED flag. Currently, the callsite of mentioned function is placed incorrectly within i40e_setup_rx_descriptors() where Rx ring's build skb flag is not set yet. This causes the XDP_REDIRECT to be partially broken due to inability to create xdp_frame in the headroom space, as the headroom is 0. For the record, below is the call graph: i40e_vsi_open i40e_vsi_setup_rx_resources i40e_setup_rx_descriptors i40e_rx_offset() <-- sets offset to 0 as build_skb flag is set below i40e_vsi_configure_rx i40e_configure_rx_ring set_ring_build_skb_enabled(ring) <-- set build_skb flag Fix this by moving i40e_rx_offset() to i40e_configure_rx_ring() after the flag setting. Fixes: f7bb0d71d658 ("i40e: store the result of i40e_rx_offset() onto i40e_ring") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-22Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-02-19 This series contains updates to i40e driver only. Slawomir resolves an issue with the IPv6 extension headers being processed incorrectly. Keita Suzuki fixes a memory leak on probe failure. Mateusz initializes AQ command structures to zero to comply with spec, fixes FW flow control settings being overwritten and resolves an issue with adding VLAN filters after enabling FW LLDP. He also adds an additional check when adding TC filter as the current check doesn't properly distinguish between IPv4 and IPv6. Sylwester removes setting disabled bit when syncing filters as this prevents VFs from completing setup. Norbert cleans up sparse warnings. v2: - Fix fixes tag on patch 7 * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix endianness conversions i40e: Fix add TC filter for IPv6 i40e: Fix VFs not created i40e: Fix addition of RX filters after enabling FW LLDP agent i40e: Fix overwriting flow control settings during driver loading i40e: Add zero-initialization of AQ command structures i40e: Fix memory leak in i40e_probe i40e: Fix flow for IPv6 next header (extension header) ==================== Link: https://lore.kernel.org/r/20210219213606.2567536-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-19i40e: Fix endianness conversionsNorbert Ciosek
Fixes the following sparse warnings: i40e_main.c:5953:32: warning: cast from restricted __le16 i40e_main.c:8008:29: warning: incorrect type in assignment (different base types) i40e_main.c:8008:29: expected unsigned int [assigned] [usertype] ipa i40e_main.c:8008:29: got restricted __le32 [usertype] i40e_main.c:8008:29: warning: incorrect type in assignment (different base types) i40e_main.c:8008:29: expected unsigned int [assigned] [usertype] ipa i40e_main.c:8008:29: got restricted __le32 [usertype] i40e_txrx.c:1950:59: warning: incorrect type in initializer (different base types) i40e_txrx.c:1950:59: expected unsigned short [usertype] vlan_tag i40e_txrx.c:1950:59: got restricted __le16 [usertype] l2tag1 i40e_txrx.c:1953:40: warning: cast to restricted __le16 i40e_xsk.c:448:38: warning: invalid assignment: |= i40e_xsk.c:448:38: left side has type restricted __le64 i40e_xsk.c:448:38: right side has type int Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Fixes: 2a508c64ad27 ("i40e: fix VLAN.TCI == 0 RX HW offload") Fixes: 3106c580fb7c ("i40e: Use batched xsk Tx interfaces to increase performance") Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support") Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-28 00:03:30 +0000