summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
AgeCommit message (Collapse)Author
2016-02-17i40e: do TSO only if CHECKSUM_PARTIAL is setShannon Nelson
Don't bother trying to set up a TSO if the skb->ip_summed is not set to CHECKSUM_PARTIAL. Change-ID: I6495b3568e404907a2965b48cf3e2effa7c9ab55 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: fix bug in dma syncJesse Brandeburg
Driver was using an offset based off a DMA handle while mapping and unmapping using sync_single_range_for[cpu|device], where it should be using DMA handle (returned from alloc_coherent) and the offset of the memory to be sync'd. Change-ID: I208256565b1595ff0e9171ab852de06b997917c6 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Nelson, Shannon <shannon.nelson@intel.com> Reviewed-by: Williams, Mitch A <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: fix write-back-on-itr to work with legacy itrAnjali Singhai Jain
We were not doing write-back on interrupt throttle for Legacy case in X722. This patch fixes that, so we do WB_ON_ITR for Legacy as well. Plus the issue that we should still be setting NO_ITR if we are touching the DYN_CTLN register since we do not want to change ITR setting here. Change-ID: I5db8491ee1544118a389db839cecc93e1bbc480e Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40evf: add new write-back modeAnjali Singhai Jain
Add write-back on interrupt throttle rate timer expiration support for the i40evf driver, when running on X722 devices. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-01-08i40e: Fix Rx hash reported to the stack by our driverAnjali Singhai Jain
If the driver calls skb_set_hash even with a zero hash, that indicates to the stack that the hash calculation is offloaded in hardware. So the Stack doesn't do a SW hash which is required for load balancing if the user decides to turn of rx-hashing on our device. This patch fixes the path so that we do not call skb_set_hash if the feature is disabled. Change-ID: Ic4debfa4ff91b5a72e447348a75768ed7a2d3e1b Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: trivial fixesJesse Brandeburg
1) remove duplicate include of tcp.h 2) put an ampersand at the end of a line instead of the beginning 3) remove a useless dev_info 4) match declaration of function to the implementation 5) repair incorrect comment 6) correct whitespace 7) remove unused define Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e/i40evf: use logical operatorMitch Williams
We shouldn't be using a bitwise operator here; it's not a bitwise operation. Use a logical operator instead. Why doesn't c have a logical-or-and-assign operator? Change-ID: Id84f3ca884910bed7073c84b1e16a102e958d0de Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: Fix memory leaks, sideband filter programmingKiran Patil
This patch fixes the memory leak which would be seen otherwise when user programs flow-director filter using ethtool (sideband filter programming). When ethtool is used to program flow directory filter, 'raw_buf' gets allocated and it is supposed to be freed as part of queue cleanup. But check of 'tx_buffer->skb' was preventing it from being freed. Change-ID: Ief4f0a1a32a653180498bf6e987c1b4342ab8923 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03i40e: Detection and recovery of TX queue hung logic moved to service_task ↵Kiran Patil
from tx_timeout This patch contains following changes: - detection and recovery logic (issue SW interrupt) has been moved to service_task from timeout function. - added some more debug info from tx_timeout. Logic to detect and recover TX queue hung is now two step process: - service_task detects TX queue hung and sets a bit(hung_detected) if it was not set. - if bit was set (means this is back-back hung condition detected), issue SW interrupt and clear the bit. - napi_poll clears the bit unconditionally since it cleans TX/RX queues. Change-ID: Ieed03a48927c845a988b3ff375090bf37caeb903 Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40evf: allocate ring structs dynamicallyMitch Williams
Instead of awkwardly keeping a fixed array of pointers in the adapter struct and then allocating ring structs individually, just keep a single pointer and allocate a single blob for the arrays. This simplifies code, shrinks the adapter structure, and future-proofs the driver by not limiting the number of rings we can handle. Change-ID: I31334ff911a6474954232cfe4bc98ccca3c769ff Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e/i40evf: prefetch skb data on transmitJesse Brandeburg
Issue a prefetch for data early in the transmit path. This should not be generally needed for Tx traffic, but it helps immensely for pktgen workloads and should help for forwarding workloads as well. Change-ID: Iefee870c20599e0c4240e1d8637e4f16b625f83a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e/i40evf: Fix RS bit update in Tx path and disable force WB workaroundAnjali Singhai Jain
This patch fixes the issue of forcing WB too often causing us to not benefit from NAPI. Without this patch we were forcing WB/arming interrupt too often taking away the benefits of NAPI and causing a performance impact. With this patch we disable force WB in the clean routine for X710 and XL710 adapters. X722 adapters do not enable interrupt to force a WB and benefit from WB_ON_ITR and hence force WB is left enabled for those adapters. For XL710 and X710 adapters if we have less than 4 packets pending a software Interrupt triggered from service task will force a WB. This patch also changes the conditions for setting RS bit as described in code comments. This optimizes when the HW does a tail bump amd when it does a WB. It also optimizes when we do a wmb. Change-ID: Id831e1ae7d3e2ec3f52cd0917b41ce1d22d75d9d Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-25i40e/i40evf: Add a stat to track how many times we have to do a force WBAnjali Singhai Jain
When in NAPI with interrupts disabled, the HW needs to be forced to do a write back on TX if the number of descriptors pending are less than a cache line. This stat helps keep track of how many times we get into this situation. Change-ID: I76c1bcc7ebccd6bffcc5aa33bfe05f2fa1c9a984 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-25i40e/i40evf: remove unused tunnel parameterShannon Nelson
Code was moved into a separate function some time ago. Change-ID: Icabbe71ce05cf5d716d3e1152cdd9cd41d11bcb5 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-18net: move skb_mark_napi_id() into core networking stackEric Dumazet
We would like to automatically provide busy polling support to all NAPI drivers, without them having to implement anything. skb_mark_napi_id() can be called from napi_gro_receive() and napi_get_frags(). Few drivers are still calling skb_mark_napi_id() because they use netif_receive_skb(). They should eventually call napi_gro_receive() instead. I will leave this to drivers maintainers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-19i40e/i40evf: adjust interrupt throttle less frequentlyJesse Brandeburg
The adaptive ITR (interrupt throttle rate) algorithm was adjusting the hardware's interrupt rate too frequently. This caused a lot of variation in the interrupt rate for fairly constant workloads. Change the code to have a counter and adjust only once every N number of interrupts. Change-ID: I0460f1f86571037484eca5aca36ac4d889cb8389 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-19i40e/i40evf: change dynamic interrupt thresholdsJesse Brandeburg
The dynamic algorithm, while now working, doesn't have good performance in 40G mode. One part of this patch addresses the high CPU utilization of some small streaming workloads that the driver should reduce CPU in. It also changes the minimum ITR that the dynamic algorithm will settle on, causing our minimum latency to go from 12us to about 14us, when using adaptive mode. It also changes the BULK interrupt rate to allow maximum throughput on a 40Gb connection with a single thread of transmit, clamping interrupt rate to 8000 for TX makes single thread traffic go too slow. The new ULTRA bulk setting is introduced and is used when the Rx packet rate on this queue exceeds 40000 packets per second. This value of 40000 was chosen because the automatic tuning of minimum ITR=20us means that a single queue can't quite achieve that many packets per second from a round-robin test. Change-ID: Icce8faa128688ca5fd2c4229bdd9726877a92ea2 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-19i40e/i40evf: fix bug in throttle rate mathJesse Brandeburg
The driver was using a value expressed in 2us increments for the divisor to figure out our bytes/usec values. Fix the usecs variable to contain a value in microseconds. Change-ID: I5c20493103c295d6f201947bb908add7040b7c41 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-19i40e/i40evf: refactor IRQ enable functionJesse Brandeburg
This change moves a multi-line register setting into a function which simplifies reading the flow of the enable function. This also fixes a bug where the enable function was enabling the interrupt twice while trying to update the two interrupt throttle rate thresholds for Rx and Tx. Change-ID: Ie308f9d0d48540204590cb9d7a5a7b1196f959bb Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16drivers/net/intel: use napi_complete_done()Jesse Brandeburg
As per Eric Dumazet's previous patches: (see commit (24d2e4a50737) - tg3: use napi_complete_done()) Quoting verbatim: Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. </end quote> Tested configuration: low latency via ethtool -C ethx adaptive-rx off rx-usecs 10 adaptive-tx off tx-usecs 15 workload: streaming rx using netperf TCP_MAERTS igb: MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1176930056 1475.36 797726 16384.00 71905 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1175182320 50476.00 23282 16384.00 71816 i40e: Hard to test because the traffic is incoming so fast (24Gb/s) that GRO always receives 87kB, even at the highest interrupt rate. Other drivers were only compile tested. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: Drop useless "IN_NETPOLL" flagAlexander Duyck
The code in i40e and i40evf is using an "IN_NETPOLL" flag that has never added any value due to the fact that the Rx clean-up is handled in NAPI. As such the flag was set, the queue was scheduled via NAPI, and then polled from the netpoll controller and if any Rx packets were processed the were processed in the wrong context. In addition the flag itself just added an unneeded conditional to the hot-path so it can safely be dropped and save us a few instructions. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: Fix handling of napi budgetAlexander Duyck
The polling routine for i40e was rounding up the budget for Rx cleanup to 1. This is incorrect as the netpoll poll call is expecting no Rx to be processed as the budget passed was 0. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e/i40evf: clean up some codeJesse Brandeburg
Add missings spaces after declarations, remove another __func__ use, remove uncessary braces, remove unneeded breaks, and useless returns, and generally fix up some code. Change-ID: Ie715d6b64976c50e1c21531685fe0a2bd38c4244 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: Add a stat to keep track of linearization countAnjali Singhai Jain
Keep track of how many times we ask the stack to linearize the skb because the HW cannot handle skbs with more than 8 frags per segment/single packet. Change-ID: If455452060963a769bbe6112cba952e79e944b52 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-03i40evf: Use numa_mem_id() to better support memoryless nodeJiang Liu
Function i40e_clean_rx_irq() tries to reuse memory pages allocated from the nearest node. To better support memoryless node, use numa_mem_id() instead of numa_node_id() to get the nearest node with memory. This change should only affect performance. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-30i40e/i40evf: fix Tx hang workaround codeJesse Brandeburg
The arm writeback (arm_wb) code is used for kicking the Tx ring to make sure any pending work is completed even if interrupts are disabled. It was running when it didn't need to, and not clearing the ring->arm_wb state after it was set. This caused Tx hangs to still occur occasionally when there really was no hang. Fix this by resetting the variable right after it was used. Change-ID: I7bf75d552ba9c4bd203d40615213861a24bb5594 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-28i40e/i40evf: refactor tx timeout logicKiran Patil
This patch modifies the driver timeout logic by issuing a writeback request via a software interrupt to the hardware the first time the driver detects a hang. The driver was too aggressive in resetting a hung queue, so back that off by removing logic to down the netdevice after too many hangs, and move the function to the service task. Change-ID: Ife100b9d124cd08cbdb81ab659008c1b9abbedea Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-26i40evf: Use the correct defines to match the VF registersAnjali Singhai Jain
Use CTLN1 instead of CTLN for the VF relative register space. Change-ID: Iefba63faf0307af55fec8dbb64f26059f7d91318 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-05i40e/i40evf: Add TX/RX outer UDP checksum support for X722Anjali Singhai Jain
X722 supports offloading of outer UDP TX and RX checksum for tunneled packets. This patch exposes the support and leaves it enabled by default. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-08-05i40e/i40evf: Add support for writeback on ITR feature for X722Anjali Singhai Jain
X722 fixes an issue from X710 where TX descriptor WB would not happen if the interrupts were disabled. In order for the write backs to happen a bit needs to be set in the dynamic interrupt control register called WB_ON_ITR. With this feature, the SW driver need not arm SW interrupts to work around the issue in X710. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23i40e: use BIT and BIT_ULL macrosJesse Brandeburg
Use macros for abstracting (1 << foo) to BIT(foo) and (1ULL << foo64) to BIT_ULL(foo64) in order to match better with kernel requirements. NOTE: the adminq_cmd.h file was not modified on purpose because of the dependency upon firmware for that file. Change-ID: I73ee2e48c880d671948aad19bd53ca6b2ac558fc Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-23i40e/i40evf: Fix and refactor dynamic ITR codeCarolyn Wyborny
This patch changes the switch statement for dynamic interrupt throttling and adds a default case. With this patch, we check the latency setting instead of the current ITR settings and the included refactor improves performance. Without this patch, the ITR setting would never change dynamically, and there was no default. Change-ID: Idb5a8a14c7109ec47c90f6e94bd43baa17d7ee37 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-07-14i40e/i40evf: improve Tx performance with a small tweakJesse Brandeburg
Add a prefetch for the next Tx descriptor to be used when we know there are more coming. Change-ID: Ibb9acab11d508eec2db7da795df74debc16eeacb Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-26i40evf: fix panic during MTU changeMitch Williams
Down was requesting queue disables, but then exited immediately without waiting for the queues to actually disable. This could allow any function called after i40evf_down to run immediately, including i40evf_up, and causes a memory leak. Removing the whole reinit_locked function is the best way to go about this, and allows for the driver to handle the state changes by requesting reset from the periodic timer. Also, add a couple WARN_ONs in slow path to help us recognize if we re-introduce this issue or missed any cases. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-06-04i40e/i40evf: Fix mixed size frags and linearizationAnjali Singhai Jain
This patch fixes a bug where the i40e Tx queue will hang if this skb is passed to the driver. With mixed size fragments while using TSO there was a corner case where we needed to linearize but we were not. This was seen with iSCSI traffic and could be reproduced with a frag list that looks like this: num_frags = 17, gso_segs = 17, hdr_len = 66, skb_shinfo(skb)->gso_size = 1448 size = 3002, j = 1, frag_size = 2936, num_frags = 17 size = 4268, j = 1, frag_size = 4096, num_frags = 16 size = 5534, j = 1, frag_size = 4096, num_frags = 15 size = 5352, j = 1, frag_size = 4096, num_frags = 14 size = 5170, j = 1, frag_size = 4096, num_frags = 13 size = 3468, j = 1, frag_size = 2576, num_frags = 12 size = 750, j = 1, frag_size = 112, num_frags = 11 size = 862, j = 2, frag_size = 112, num_frags = 10 size = 974, j = 3, frag_size = 112, num_frags = 9 size = 1126, j = 4, frag_size = 152, num_frags = 8 size = 1330, j = 5, frag_size = 204, num_frags = 7 size = 1534, j = 6, frag_size = 204, num_frags = 6 size = 356, j = 1, frag_size = 204, num_frags = 5 size = 560, j = 2, frag_size = 204, num_frags = 4 size = 764, j = 3, frag_size = 204, num_frags = 3 size = 968, j = 4, frag_size = 204, num_frags = 2 size = 1140, j = 5, frag_size = 172, num_frags = 1 result: linearize = 0, j = 6 Change-ID: I79bb1aeab0af255fe2ce28e93672a85d85bf47e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40e/i40evf: remove time_stamp memberJesse Brandeburg
The driver doesn't use the time_stamp member to determine if there is a tx_hang any more. There really isn't any point to the variable at all so just remove it. It was left over from a previous tx_hang design. Change-ID: I4c814827e1bcb46e45118fe37acdcfa814fb62a0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40e/i40evf: force inline transmit functionsJesse Brandeburg
Inlining these functions gives us about 15% more 64 byte packets per second when using pktgen. 13.3 million to 15 million with a single queue. Also fix the function names in i40evf to i40evf not i40e while we are touching the function header. Change-ID: I3294ae9b085cf438672b6db5f9af122490ead9d0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40evf: skb->xmit_more supportJesse Brandeburg
Eric added support for skb->xmit_more in i40e, this ports that into i40evf as well. Support skb->xmit_more in i40evf is straightforward; we need to move around i40e_maybe_stop_tx() call to correctly test netif_xmit_stopped() before taking the decision to not kick the NIC. Change-ID: Idddda6a2e4a7ab335631c91ced51f55b25eb8468 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40e/i40evf: Remove unneeded TODOGreg Rose
There's no need for a counter so remove the TODO comment. Change-ID: I3321dda04934c4f5fda9b279ab666192bda44214 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-28i40e/i40evf: Add ATR support for tunneled TCP/IPv4/IPv6 packets.Anjali Singhai Jain
Without this, RSS would have done inner header load balancing. Now we can get the benefits of ATR for tunneled packets to better align TX and RX queues with the right core/interrupt. Change-ID: I07d0e0a192faf28fdd33b2f04c32b2a82ff97ddd Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-14net: batch of last_rx update avoidance in ethernet drivers.françois romieu
None of those drivers uses last_rx for its own needs. See 4dc89133f49b8cfd77ba7e83f5960aed63aaa99e ("net: add a comment on netdev->last_rx") for reference. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09i40e/i40evf: Use dma_rmb where appropriateAlexander Duyck
Update i40e and i40evf to use dma_rmb. This should improve performance by decreasing the barrier overhead on strong ordered architectures. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03i40e/i40evf: Set Ethernet protocol correctly when Tx VLAN offloads are disabledGreg Rose
If transmit VLAN HW offloads are disabled then the network stack sends up an skb with the protocol set to 8021q. In that case to get the correct checksum offloads we have to reset the skb protocol to the encapsulated ethertype. Change-ID: I903d78533de09b1c5d3ec695ee1990dd0fa5dd0d Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e/i40evf: fix bug when skb allocation failsJesse Brandeburg
If the skb allocation fails we should not continue using the skb pointer. Breaking out at the point of failure means that at the next RX interrupt the driver will try the allocation again. Change-ID: Iefaad69856ced7418bfd92afe55322676341f82e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40evf: Fix Outer UDP RX checksum codeAnjali Singhai Jain
Inner protocol being UDP should not stop us from verifying Outer UDP checksum correctness. If the Outer protocol is not UDP (NVGRE) we should not be doing a UDP checksum check. If the packet has zero checksum, skip checksum check. Change-ID: Ie7f153feb276a59f66a54a0938901b2c0a8100fa Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-09i40e/i40evf: fix accidental write to ITR registersJesse Brandeburg
Fix a bug introduced in the force writeback code, where the interrupt rate was set to 0 (maximum) by accident. The driver must correctly set the NOITR fields to avoid ITR update as a side effect of triggering the software interrupt. Change-ID: I290851ae04ef3811c43aab5ee33242029f26c1a3 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-07i40e/i40evf: enable prefetch of Tx descriptors during cleanupJesse Brandeburg
Performance can be improved a bit by imitating ixgbe and using prefetch to get us the next Tx descriptor. Change-ID: Ice7ffd4cd0ce87c35295059bdb7972a7f53723aa Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-07i40e/i40evf: Simplify tunnel selection logicAnjali Singhai Jain
Use l4_tunnel type generically to keep code flow simple. Change-ID: Ic52287e3b1ca4204e6b6e13431890c1a6ae9c422 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-07i40e/i40evf: Refactor i40e_debug_aq and make some functions staticShannon Nelson
A sparse complaint in i40e_debug_aq in a funky buffer write goes away by straightening out the code out to something less convoluted. Also fix some other sparse warnings while we are at it, making some functions static and using NULL instead of 0. Change-ID: I93907534fe1f1f675830774b3d14ecf1c6ffc9a0 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-09-17 20:43:51 +0000