summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice/ice_main.c
AgeCommit message (Collapse)Author
2024-06-23ice: Rebuild TC queues on VSI queue reconfigurationJan Sokolowski
TC queues needs to be correctly updated when the number of queues on a VSI is reconfigured, so netdev's queue and TC settings will be dynamically adjusted and could accurately represent the underlying hardware state after changes to the VSI queue counts. Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-13ice: fix 200G link speed message logPaul Greenwalt
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support for 200G PHY speeds, but did not include 200G link speed message support. As a result the driver incorrectly reports Unknown for 200G link speed. Fix this by adding 200G support to ice_print_link_msg(). Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-13ice: avoid IRQ collision to fix init failure on ACPI S3 resumeEn-Wei Wu
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes that irdma would break and report hardware initialization failed after suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5). The problem is caused due to the collision between the irq numbers requested in irdma and the irq numbers requested in other drivers after suspend/resume. The irq numbers used by irdma are derived from ice's ice_pf->msix_entries which stores mappings between MSI-X index and Linux interrupt number. It's supposed to be cleaned up when suspend and rebuilt in resume but it's not, causing irdma using the old irq numbers stored in the old ice_pf->msix_entries to request_irq() when resume. And eventually collide with other drivers. This patch fixes this problem. On suspend, we call ice_deinit_rdma() to clean up the ice_pf->msix_entries (and free the MSI-X vectors used by irdma if we've dynamically allocated them). On resume, we call ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the MSI-X vectors if we would like to dynamically allocate them). Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Tested-by: Cyrus Lien <cyrus.lien@canonical.com> Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-05ice: map XDP queues to vectors in ice_vsi_map_rings_to_vectors()Larysa Zaremba
ice_pf_dcb_recfg() re-maps queues to vectors with ice_vsi_map_rings_to_vectors(), which does not restore the previous state for XDP queues. This leads to no AF_XDP traffic after rebuild. Map XDP queues to vectors in ice_vsi_map_rings_to_vectors(). Also, move the code around, so XDP queues are mapped independently only through .ndo_bpf(). Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-05ice: add flag to distinguish reset from .ndo_bpf in XDP rings configLarysa Zaremba
Commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in the rebuild process. The behaviour of the XDP rings config functions is context-dependent, so the change of order has led to ice_destroy_xdp_rings() doing additional work and removing XDP prog, when it was supposed to be preserved. Also, dependency on the PF state reset flags creates an additional, fortunately less common problem: * PFR is requested e.g. by tx_timeout handler * .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(), but reset flag is set, so rings are destroyed without deleting the program * ice_vsi_rebuild tries to delete non-existent XDP rings, because the program is still on the VSI * system crashes With a similar race, when requested to attach a program, ice_prepare_xdp_rings() can actually skip setting the program in the VSI and nevertheless report success. Instead of reverting to the old order of function calls, add an enum argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in order to distinguish between calls from rebuild and .ndo_bpf(). Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-05-06 (ice) This series contains updates to ice driver only. Paul adds support for additional E830 devices and adjusts naming for existing E830 devices. Marcin commonizes a couple of TC setup calls to reduce duplicated code. Mateusz adds ice_vsi_cfg_params into ice_vsi to consolidate info. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsi ice: Deduplicate tc action setup ice: update E830 device ids and comments ice: add additional E830 device ids ==================== Link: https://lore.kernel.org/r/20240506170827.948682-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsiMateusz Polchlopek
Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi. Prior to that the members of the struct were scattered around ice_vsi, and were copy-pasted for purposes of reinit. Now we have struct handy, and it is easier to have something sticky in the flags field. Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vaishnavi Tipireddy <vaishnavi.tipireddy@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: update E830 device ids and commentsPaul Greenwalt
Update existing E830 device ids and comments to align with new naming 'C' for 100G and 'CC' for 200G. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-06ice: add additional E830 device idsPaul Greenwalt
Add support for additional E830 device ids which are supported by the driver: - 0x12D5: Intel(R) Ethernet Controller E830-C for backplane - 0x12D8: Intel(R) Ethernet Controller E830-C for QSFP - 0x12DA: Intel(R) Ethernet Controller E830-C for SFP - 0x12DC: Intel(R) Ethernet Controller E830-XXV for backplane - 0x12DD: Intel(R) Ethernet Controller E830-XXV for QSFP - 0x12DE: Intel(R) Ethernet Controller E830-XXV for SFP Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-25Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== net: intel: start The Great Code Dedup + Page Pool for iavf Alexander Lobakin says: Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and libie) and switch iavf to Page Pool. Details are in the commit messages; here's a summary: Not a secret there's a ton of code duplication between two and more Intel ethernet modules. Before introducing new changes, which would need to be copied over again, start decoupling the already existing duplicate functionality into a new module, which will be shared between several Intel Ethernet drivers. The first name that came to my mind was "libie" -- "Intel Ethernet common library". Also this sounds like "lovelie" (-> one word, no "lib I E" pls) and can be expanded as "lib Internet Explorer" :P The "generic", pure-software part is placed separately, so that it can be easily reused in any driver by any vendor without linking to the Intel pre-200G guts. In a few words, it's something any modern driver does the same way, but nobody moved it level up (yet). The series is only the beginning. From now on, adding every new feature or doing any good driver refactoring will remove much more lines than add for quite some time. There's a basic roadmap with some deduplications planned already, not speaking of that touching every line now asks: "can I share this?". The final destination is very ambitious: have only one unified driver for at least i40e, ice, iavf, and idpf with a struct ops for each generation. That's never gonna happen, right? But you still can at least try. PP conversion for iavf lands within the same series as these two are tied closely. libie will support Page Pool model only, so that a driver can't use much of the lib until it's converted. iavf is only the example, the rest will eventually be converted soon on a per-driver basis. That is when it gets really interesting. Stay tech. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: MAINTAINERS: add entry for libeth and libie iavf: switch to Page Pool iavf: pack iavf_ring more efficiently libeth: add Rx buffer management page_pool: add DMA-sync-for-CPU inline helper page_pool: constify some read-only function arguments slab: introduce kvmalloc_array_node() and kvcalloc_node() iavf: drop page splitting and recycling iavf: kill "legacy-rx" for good net: intel: introduce {, Intel} Ethernet common library ==================== Link: https://lore.kernel.org/r/20240424203559.3420468-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-24net: intel: introduce {, Intel} Ethernet common libraryAlexander Lobakin
Not a secret there's a ton of code duplication between two and more Intel ethernet modules. Before introducing new changes, which would need to be copied over again, start decoupling the already existing duplicate functionality into a new module, which will be shared between several Intel Ethernet drivers. Add the lookup table which converts 8/10-bit hardware packet type into a parsed bitfield structure for easy checking packet format parameters, such as payload level, IP version, etc. This is currently used by i40e, ice and iavf and it's all the same in all three drivers. The only difference introduced in this implementation is that instead of defining a 256 (or 1024 in case of ice) element array, add unlikely() condition to limit the input to 154 (current maximum non-reserved packet type). There's no reason to waste 600 (or even 3600) bytes only to not hurt very unlikely exception packets. The hash computation function now takes payload level directly as a pkt_hash_type. There's a couple cases when non-IP ptypes are marked as L3 payload and in the previous versions their hash level would be 2, not 3. But skb_set_hash() only sees difference between L4 and non-L4, thus this won't change anything at all. The module is behind the hidden Kconfig symbol, which the drivers will select when needed. The exports are behind 'LIBIE' namespace to limit the scope of the functions. Not that non-HW-specific symbols will live in yet another module, libeth. This is done to easily distinguish pretty generic code ready for reusing by any other vendor and/or for moving the layer up from the code useful in Intel's 1-100G drivers only. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-22ice: Enable switching default Tx scheduler topologyMichal Wilczynski
Introduce support for Tx scheduler topology change, based on user selection, from default 9-layer to 5-layer. Change requires NVM (version 3.20 or newer) and DDP package (OS Package 1.3.30 or newer - available for over a year in linux-firmware, since commit aed71f296637 in linux-firmware ("ice: Update package to 1.3.30.0")) https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=aed71f296637 Enable 5-layer topology switch in init path of the driver. To accomplish that upload of the DDP package needs to be delayed, until change in Tx topology is finished. To trigger the Tx change user selection should be changed in NVM using devlink. Then the platform should be rebooted. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-17ice: Add automatic VF reset on Tx MDD eventsMarcin Szycik
In cases when VF sends malformed packets that are classified as malicious, it can cause Tx queue to freeze as a result of Malicious Driver Detection event. Such malformed packets can appear as a result of a faulty userspace app running on VF. This frozen queue can be stuck for several minutes being unusable. User might prefer to immediately bring the VF back to operational state after such event, which can be done by automatically resetting the VF which caused MDD. This is already implemented for Rx events (mdd-auto-reset-vf flag private flag needs to be set). Extend the VF auto reset to also cover Tx MDD events. When any MDD event occurs on VF (Tx or Rx) and the mdd-auto-reset-vf private flag is set, perform a graceful VF reset to quickly bring it back to operational state. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Co-developed-by: Liang-Min Wang <liang-min.wang@intel.com> Signed-off-by: Liang-Min Wang <liang-min.wang@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-02Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-01 (ice) This series contains updates to ice driver only. Michal Schmidt changes flow for gettimex64 to use host-side spinlock rather than hardware semaphore for lighter-weight locking. Steven adds ability for switch recipes to be re-used when firmware supports it. Thorsten Blum removes unwanted newlines in netlink messaging. Michal Swiatkowski and Piotr re-organize devlink related code; renaming, moving, and consolidating it to a single location. Michal also simplifies the devlink init and cleanup path to occur under a single lock call. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: hold devlink lock for whole init/cleanup ice: move devlink port code to a separate file ice: move ice_devlink.[ch] to devlink folder ice: Remove newlines in NL_SET_ERR_MSG_MOD ice: Add switch recipe reusing feature ice: fold ice_ptp_read_time into ice_ptp_gettimex64 ice: avoid the PTP hardware semaphore in gettimex64 path ice: add ice_adapter for shared data across PFs on the same NIC ==================== Link: https://lore.kernel.org/r/20240401172421.1401696-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-29 (net: intel) This series contains updates to most Intel drivers. Jesse moves declaration of pci_driver struct to remove need for forward declarations in igb and converts Intel drivers to user newer power management ops. Sasha reworks power management flow on igc to avoid using rtnl_lock() during those flows. Maciej reorganizes i40e_nvm file to avoid forward declarations. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: avoid forward declarations in i40e_nvm.c igc: Refactor runtime power management flow net: intel: implement modern PM ops declarations igb: simplify pci ops declaration ==================== Link: https://lore.kernel.org/r/20240329175632.211340-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01ice: hold devlink lock for whole init/cleanupMichal Swiatkowski
Simplify devlink lock code in driver by taking it for whole init/cleanup path. Instead of calling devlink functions that taking lock call the lockless versions. Suggested-by: Jiri Pirko <jiri@resnulli.us> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: move devlink port code to a separate filePiotr Raczynski
Keep devlink related code in a separate file. More devlink port code and handlers will be added here for other port operations. Remove no longer needed include of our devlink.h in ice_lib.c. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: move ice_devlink.[ch] to devlink folderMichal Swiatkowski
Only moving whole files, fixing Makefile and bunch of includes. Some changes to ice_devlink file was done even in representor part (Tx topology), so keep it as final patch to not mess up with rebasing. After moving to devlink folder there is no need to have such long name for these files. Rename them to simple devlink. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-01ice: add ice_adapter for shared data across PFs on the same NICMichal Schmidt
There is a need for synchronization between ice PFs on the same physical adapter. Add a "struct ice_adapter" for holding data shared between PFs of the same multifunction PCI device. The struct is refcounted - each ice_pf holds a reference to it. Its first use will be for PTP. I expect it will be useful also to improve the ugliness that is ice_prot_id_tbl. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-29netlink: introduce type-checking attribute iterationJohannes Berg
There are, especially with multi-attr arrays, many cases of needing to iterate all attributes of a specific type in a netlink message or a nested attribute. Add specific macros to support that case. Also convert many instances using this spatch: @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } Although I had to undo one bad change this made, and I also adjusted some other code for whitespace and to use direct variable initialization now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29net: intel: implement modern PM ops declarationsJesse Brandeburg
Switch the Intel networking drivers to use the new power management ops declaration formats and macros, which allows us to drop __maybe_unused, as well as a bunch of ifdef checking CONFIG_PM. This is safe to do because the compiler drops the unused functions, verified by checking for any of the power management function symbols being present in System.map for a build without CONFIG_PM. If a driver has runtime PM, define the ops with pm_ptr(), and if the driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of the macros for declaring the members of the pm_ops structs. Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on x64_64. Reviewed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25ice: remove switchdev control plane VSIMichal Swiatkowski
For slow-path Rx and Tx PF VSI is used. There is no need to have control plane VSI. Remove all code related to it. Eswitch rebuild can't fail without rebuilding control plane VSI. Return void from ice_eswitch_rebuild(). Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.9 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06ice: fix stats being updated by way too large valuesPrzemek Kitszel
Simplify stats accumulation logic to fix the case where we don't take previous stat value into account, we should always respect it. Main netdev stats of our PF (Tx/Rx packets/bytes) were reported orders of magnitude too big during OpenStack reconfiguration events, possibly other reconfiguration cases too. The regression was reported to be between 6.1 and 6.2, so I was almost certain that on of the two "preserve stats over reset" commits were the culprit. While reading the code, it was found that in some cases we will increase the stats by arbitrarily large number (thanks to ignoring "-prev" part of condition, after zeroing it). Note that this fixes also the case where we were around limits of u64, but that was not the regression reported. Full disclosure: I remember suggesting this particular piece of code to Ben a few years ago, so blame on me. Fixes: 2fd5e433cd26 ("ice: Accumulate HW and Netdev statistics over reset") Reported-by: Nebojsa Stevanovic <nebojsa.stevanovic@gcore.com> Link: https://lore.kernel.org/intel-wired-lan/VI1PR02MB439744DEDAA7B59B9A2833FE912EA@VI1PR02MB4397.eurprd02.prod.outlook.com Reported-by: Christian Rohmann <christian.rohmann@inovex.de> Link: https://lore.kernel.org/intel-wired-lan/f38a6ca4-af05-48b1-a3e6-17ef2054e525@inovex.de Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-05net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink()Rand Deeb
The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration. Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink") Signed-off-by: Rand Deeb <rand.sec96@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-04ice: do not disable Tx queues twice in ice_down()Maciej Fijalkowski
ice_down() clears QINT_TQCTL_CAUSE_ENA_M bit twice, which is not necessary. First clearing happens in ice_vsi_dis_irq() and second in ice_vsi_stop_tx_ring() - remove the first one. While at it, make ice_vsi_dis_irq() static as ice_down() is the only current caller of it. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-20ice: Fix ASSERT_RTNL() warning during certain scenariosAmritha Nambiar
Commit 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") invoked the netif_queue_set_napi() call. This kernel function requires to be called with rtnl_lock taken, otherwise ASSERT_RTNL() warning will be triggered. ice_vsi_rebuild() initiating this call is under rtnl_lock when the rebuild is in response to configuration changes from external interfaces (such as tc, ethtool etc. which holds the lock). But, the VSI rebuild generated from service tasks and resets (PFR/CORER/GLOBR) is not under rtnl lock protection. Handle these cases as well to hold lock before the kernel call (by setting the 'locked' boolean to false). netif_queue_set_napi() is also used to clear previously set napi in the q_vector unroll flow. Handle this for locked/lockless execution paths. Fixes: 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi") Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: Fix debugfs with devlink reloadWojciech Drewek
During devlink reload it is needed to remove debugfs entries correlated with only one PF. ice_debugfs_exit() removes all entries created by ice driver so we can't use it. Introduce ice_debugfs_pf_deinit() in order to release PF's debugfs entries. Move ice_debugfs_exit() call to ice_module_exit(), it makes more sense since ice_debugfs_init() is called in ice_module_init() and not in ice_probe(). Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: Remove and readd netdev during devlink reloadWojciech Drewek
Recent changes to the devlink reload (commit 9b2348e2d6c9 ("devlink: warn about existing entities during reload-reinit")) force the drivers to destroy devlink ports during reinit. Adjust ice driver to this requirement, unregister netdvice, destroy devlink port. ice_init_eth() was removed and all the common code between probe and reload was moved to ice_load(). During devlink reload we can't take devl_lock (it's already taken) and in ice_probe() we have to lock it. Use devl_* variant of the API which does not acquire and release devl_lock. Guard ice_load() with devl_lock only in case of probe. Suggested-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: Add helper function ice_is_generic_macGrzegorz Nitka
E800 series devices have a couple of quirks: 1. Sideband control queues are not supported 2. The registers that the driver needs to program for the "Precision Time Protocol (PTP)" feature are different for E800 series devices compared to other devices supported by this driver. Both these require conditional logic based on the underlying device we are dealing with. The function ice_is_sbq_supported added by commit 8f5ee3c477a8 ("ice: add support for sideband messages") addresses (1). The same function can be used to address (2) as well but this just looks weird readability wise in cases that have nothing to do with sideband control queues: if (ice_is_sbq_supported(hw)) /* program register A */ else /* program register B */ For these cases, the function ice_is_generic_mac introduced by this patch communicates the idea/intention better. Also rework ice_is_sbq_supported to use this new function. As side-band queue is supported for E825C devices, it's mac_type is considered as generic mac_type. Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-12ice: introduce new E825C devices familyGrzegorz Nitka
Introduce new Intel Ethernet E825C family devices. Add new PCI device IDs which are going to be supported by the driver: - 579C: Intel(R) Ethernet Connection E825-C for backplane - 579D: Intel(R) Ethernet Connection E825-C for QSFP - 579E: Intel(R) Ethernet Connection E825-C for SFP - 579F: Intel(R) Ethernet Connection E825-C for SGMII Add helper function ice_is_e825c() to verify if the running device belongs to E825C family. Co-developed-by: Jan Glaza <jan.glaza@intel.com> Signed-off-by: Jan Glaza <jan.glaza@intel.com> Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-30ice: factor out ice_ptp_rebuild_owner()Jacob Keller
The ice_ptp_reset() function uses a goto to skip past clock owner operations if performing a PF reset or if the device is not the clock owner. This is a bit confusing. Factor this out into ice_ptp_rebuild_owner() instead. The ice_ptp_reset() function is called by ice_rebuild() to restore PTP functionality after a device reset. Follow the convention set by the ice_main.c file and rename this function to ice_ptp_rebuild(), in the same way that we have ice_prepare_for_reset() and ice_ptp_prepare_for_reset(). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30ice: pass reset type to PTP reset functionsJacob Keller
The ice_ptp_prepare_for_reset() and ice_ptp_reset() functions currently check the pf->flags ICE_FLAG_PFR_REQ bit to determine if the current reset is a PF reset or not. This is problematic, because it is possible that a PF reset and a higher level reset (CORE reset, GLOBAL reset, EMP reset) are requested simultaneously. In that case, the driver performs the highest level reset requested. However, the ICE_FLAG_PFR_REQ flag will still be set. The main driver reset functions take an enum ice_reset_req indicating which reset is actually being performed. Pass this data into the PTP functions and rely on this instead of relying on the driver flags. This ensures that the PTP code performs the proper level of reset that the driver is actually undergoing. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()") 0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL") https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02ice: remove rx_len_errors statisticJan Sokolowski
It was found that this statistic is incorrectly reported by HW and thus, useless. As RX length error statistics are shown to the end user when requested, the values reported are misleading. Thus, that value is no longer reported and doesn't count anymore when adding all rx errors. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02ice: Enable SW interrupt from FW for LL TSKarol Kolacinski
Introduce new capability - Low Latency Timestamping with Interrupt. On supported devices, driver can request a single timestamp from FW without polling the register afterwards. Instead, FW can issue a dedicated interrupt when the timestamp was read from the PHY register and its value is available to read from the register. This eliminates the need of bottom half scheduling, which results in minimal delay for timestamping. For this mode, allocate TS indices sequentially, so that timestamps are always completed in FIFO manner. Co-developed-by: Yochai Hagvi <yochai.hagvi@intel.com> Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-02ice: Schedule service task in IRQ top halfKarol Kolacinski
Schedule service task and EXTTS in the top half to avoid bottom half scheduling if possible, which significantly reduces timestamping delay. Co-developed-by: Michal Michalik <michal.michalik@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27ice: Shut down VSI with "link-down-on-close" enabledNgai-Mint Kwan
Disabling netdev with ethtool private flag "link-down-on-close" enabled can cause NULL pointer dereference bug. Shut down VSI regardless of "link-down-on-close" state. Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27ice: Fix link_down_on_close messageKatarzyna Wieczerzycka
The driver should not report an error message when for a medialess port the link_down_on_close flag is enabled and the physical link cannot be set down. Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Katarzyna Wieczerzycka <katarzyna.wieczerzycka@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-22Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== intel: use bitfield operations Jesse Brandeburg says: After repeatedly getting review comments on new patches, and sporadic patches to fix parts of our drivers, we should just convert the Intel code to use FIELD_PREP() and FIELD_GET(). It's then "common" in the code and hopefully future change-sets will see the context and do-the-right-thing. This conversion was done with a coccinelle script which is mentioned in the commit messages. Generally there were only a couple conversions that were "undone" after the automatic changes because they tried to convert a non-contiguous mask. Patch 1 is required at the beginning of this series to fix a "forever" issue in the e1000e driver that fails the compilation test after conversion because the shift / mask was out of range. The second patch just adds all the new #includes in one go. The patch titled: "ice: fix pre-shifted bit usage" is needed to allow the use of the FIELD_* macros and fix up the unexpected "shifts included" defines found while creating this series. The rest are the conversion to use FIELD_PREP()/FIELD_GET(), and the occasional leXX_{get,set,encode}_bits() call, as suggested by Alex. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-18Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-12-18 This PR is larger than usual and contains changes in various parts of the kernel. The main changes are: 1) Fix kCFI bugs in BPF, from Peter Zijlstra. End result: all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y. 2) Introduce BPF token object, from Andrii Nakryiko. It adds an ability to delegate a subset of BPF features from privileged daemon (e.g., systemd) through special mount options for userns-bound BPF FS to a trusted unprivileged application. The design accommodates suggestions from Christian Brauner and Paul Moore. Example: $ sudo mkdir -p /sys/fs/bpf/token $ sudo mount -t bpf bpffs /sys/fs/bpf/token \ -o delegate_cmds=prog_load:MAP_CREATE \ -o delegate_progs=kprobe \ -o delegate_attachs=xdp 3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei. - Complete precision tracking support for register spills - Fix verification of possibly-zero-sized stack accesses - Fix access to uninit stack slots - Track aligned STACK_ZERO cases as imprecise spilled registers. It improves the verifier "instructions processed" metric from single digit to 50-60% for some programs. - Fix verifier retval logic 4) Support for VLAN tag in XDP hints, from Larysa Zaremba. 5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu. End result: better memory utilization and lower I$ miss for calls to BPF via BPF trampoline. 6) Fix race between BPF prog accessing inner map and parallel delete, from Hou Tao. 7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu. It allows BPF interact with IPSEC infra. The intent is to support software RSS (via XDP) for the upcoming ipsec pcpu work. Experiments on AWS demonstrate single tunnel pcpu ipsec reaching line rate on 100G ENA nics. 8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao. 9) BPF file verification via fsverity, from Song Liu. It allows BPF progs get fsverity digest. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits) bpf: Ensure precise is reset to false in __mark_reg_const_zero() selftests/bpf: Add more uprobe multi fail tests bpf: Fail uprobe multi link with negative offset selftests/bpf: Test the release of map btf s390/bpf: Fix indirect trampoline generation selftests/bpf: Temporarily disable dummy_struct_ops test on s390 x86/cfi,bpf: Fix bpf_exception_cb() signature bpf: Fix dtor CFI cfi: Add CFI_NOSEAL() x86/cfi,bpf: Fix bpf_struct_ops CFI x86/cfi,bpf: Fix bpf_callback_t CFI x86/cfi,bpf: Fix BPF JIT call cfi: Flip headers selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment bpf: Limit the number of kprobes when attaching program to multiple kprobes bpf: Limit the number of uprobes when attaching program to multiple uprobes bpf: xdp: Register generic_kfunc_set with XDP programs selftests/bpf: utilize string values for delegate_xxx mount options ... ==================== Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18ice: field get conversionJesse Brandeburg
Refactor the ice driver to use FIELD_GET() for mask and shift reads, which reduces lines of code and adds clarity of intent. This code was generated by the following coccinelle/spatch script and then manually repaired. @get@ constant shift,mask; type T; expression a; @@ -(((T)(a) & mask) >> shift) +FIELD_GET(mask, a) and applied via: spatch --sp-file field_prep.cocci --in-place --dir \ drivers/net/ethernet/intel/ CC: Alexander Lobakin <aleksander.lobakin@intel.com> Cc: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14ice: add ability to read and configure FW log dataPaul M Stillwell Jr
Once logging is enabled the user should read the data from the 'data' file. The data is in the form of a binary blob that can be sent to Intel for decoding. To read the data use a command like: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data > log_data.bin If the user wants to clear the FW log data that has been stored in the driver then they can write any value to the 'data' file and that will clear the data. An example is: # echo 34 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data In addition to being able to read the data the user can configure how much memory is used to store FW log data. This allows the user to increase/decrease the amount of memory based on the users situation. The data is stored such that if the memory fills up then the oldest data will get overwritten in a circular manner. To change the amount of memory the user can write to the 'log_size' file like this: # echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size Where <value> is one of 128K, 256K, 512K, 1M, and 2M. The default value is 1M. The user can see the current value of 'log_size' by reading the file: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14ice: configure FW loggingPaul M Stillwell Jr
Users want the ability to debug FW issues by retrieving the FW logs from the E8xx devices. Use debugfs to allow the user to configure the log level and number of messages for FW logging. If FW logging is supported on the E8xx then the file 'fwlog' will be created under the PCI device ID for the ice driver. If the file does not exist then either the E8xx doesn't support FW logging or debugfs is not enabled on the system. One thing users want to do is control which events are reported. The user can read and write the 'fwlog/modules/<module name>' to get/set the log levels. Each module in the FW that supports logging ht as a file under 'fwlog/modules' that supports reading (to see what the current log level is) and writing (to change the log level). The format to set the log levels for a module are: # echo <log level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module> The supported log levels are: * none * error * warning * normal * verbose Each level includes the messages from the previous/lower level The modules that are supported are: * general * ctrl * link * link_topo * dnl * i2c * sdp * mdio * adminq * hdma * lldp * dcbx * dcb * xlr * nvm * auth * vpd * iosf * parser * sw * scheduler * txq * rsvd * post * watchdog * task_dispatch * mng * synce * health * tsdrv * pfreg * mdlver * all The module 'all' is a special module which allows the user to read or write to all of the modules. The following example command would set the DCB module to the 'normal' log level: # echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb If the user wants to set the DCB, Link, and the AdminQ modules to 'verbose' then the commands are: # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/adminq If the user wants to set all modules to the 'warning' level then the command is: # echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all If the user wants to disable logging for a module then they can set the level to 'none'. An example setting the 'watchdog' module is: # echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/watchdog If the user wants to see what the log level is for a specific module then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb This will return the log level for the DCB module. If the user wants to see the log level for all the modules then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all Writing to the module file will update the configuration, but NOT enable the configuration (that is a separate command). In addition to configuring the modules, the user can also configure the number of log messages (nr_messages) to include in a single Admin Receive Queue (ARQ) event.The range is 1-128 (1 means push every log message, 128 means push only when the max AQ command buffer is full). The suggested value is 10. To see/change the resolution the user can read/write the 'fwlog/nr_messages' file. An example changing the value to 50 is # echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages To see the current value of 'nr_messages' then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-14ice: remove FW logging codePaul M Stillwell Jr
The FW logging code doesn't work because there is no way to set cq_ena or uart_ena so remove the code. This code is the original (v1) way of FW logging so it should be replaced with the v2 way. Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-13ice: enable symmetric-xor RSS for Toeplitz hash functionJeff Guo
Allow the user to set the symmetric Toeplitz hash function via: # ethtool -X eth0 hfunc toeplitz symmetric-xor All existing RSS configurations will be converted to symmetric unless they have a non-symmetric field (other than IP src/dst and L4 src/dst ports) used for hashing. The driver will reject a new RSS configuration if such a field is requested. The hash function in the E800 NICs is set per-VSI and a specific AQ command is needed to modify the hash function. Use the AQ command to enable setting the symmetric Toeplitz RSS hash function for any VSI in the new ice_set_rss_hfunc(). When the Symmetric Toeplitz hash function is used, the hardware sets the input set of the RSS (Toeplitz) algorithm to be the XOR of the fields index by HSYMM and the fields index by the INSET registers. We use this to create a symmetric hash by setting the HSYMM registers to point to their counterparts in the INSET registers: HSYMM [src_fv] = dst_fv; HSYMM [dst_fv] = src_fv; where src_fv and dst_fv are the indexes of the protocol's src and dst fields. Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Jeff Guo <jia.guo@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-8-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13ice: refactor the FD and RSS flow ID generationAhmed Zaki
The flow director and RSS blocks use separate methods to generate a unique 64 bit ID for the flow. This is not extendable, especially for the RSS that already uses all 64 bit space. Refactor the flow generation API so that the ID is generated within ice_flow_add_prof(). The FD and RSS blocks caches the generated ID for later use. Suggested-by: Dan Nowlin <dan.nowlin@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-7-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>