summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice
AgeCommit message (Collapse)Author
2023-03-28ice: Fix ice_cfg_rdma_fltr() to only update relevant fieldsBrett Creeley
The current implementation causes ice_vsi_update() to update all VSI fields based on the cached VSI context. This also assumes that the ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the VSI context is not correctly synced by the driver. Fix this by only updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID. Also, make sure to save the updated result in the cached VSI context on success. Fixes: 348048e724a0 ("ice: Implement iidc operations") Co-developed-by: Robert Malz <robertx.malz@intel.com> Signed-off-by: Robert Malz <robertx.malz@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-28ice: fix W=1 headers mismatchJesse Brandeburg
make modules W=1 returns: .../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx' .../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf' .../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb' Fix these warnings by adding and deleting the deviant arguments. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Fixes: d7956d81f150 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()") CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/20230324120623.4ebbc66f@canb.auug.org.au/ https://lore.kernel.org/all/20230321211135.47711-1-saeed@kernel.org/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-21ice: remove filters only if VSI is deletedMichal Swiatkowski
Filters shouldn't be removed in VSI rebuild path. Removing them on PF VSI results in no rule for PF MAC after changing for example queues amount. Remove all filters only in the VSI remove flow. As unload should also cause the filter to be removed introduce, a new function ice_stop_eth(). It will unroll ice_start_eth(), so remove filters and close VSI. Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: check if VF exists before mode checkMichal Swiatkowski
Setting trust on VF should return EINVAL when there is no VF. Move checking for switchdev mode after checking if VF exists. Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Kalyan Kodamagula <kalyan.kodamagula@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: fix rx buffers handling for flow director packetsPiotr Raczynski
Adding flow director filters stopped working correctly after commit 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side"). As a result, only first flow director filter can be added, adding next filter leads to NULL pointer dereference attached below. Rx buffer handling and reallocation logic has been optimized, however flow director specific traffic was not accounted for. As a result driver handled those packets incorrectly since new logic was based on ice_rx_ring::first_desc which was not set in this case. Fix this by setting struct ice_rx_ring::first_desc to next_to_clean for flow director received packets. [ 438.544867] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 438.551840] #PF: supervisor read access in kernel mode [ 438.556978] #PF: error_code(0x0000) - not-present page [ 438.562115] PGD 7c953b2067 P4D 0 [ 438.565436] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 438.569794] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.2.0-net-bug #1 [ 438.577531] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [ 438.588470] RIP: 0010:ice_clean_rx_irq+0x2b9/0xf20 [ice] [ 438.593860] Code: 45 89 f7 e9 ac 00 00 00 8b 4d 78 41 31 4e 10 41 09 d5 4d 85 f6 0f 84 82 00 00 00 49 8b 4e 08 41 8b 76 1c 65 8b 3d 47 36 4a 3f <48> 8b 11 48 c1 ea 36 39 d7 0f 85 a6 00 00 00 f6 41 08 02 0f 85 9c [ 438.612605] RSP: 0018:ff8c732640003ec8 EFLAGS: 00010082 [ 438.617831] RAX: 0000000000000800 RBX: 00000000000007ff RCX: 0000000000000000 [ 438.624957] RDX: 0000000000000800 RSI: 0000000000000000 RDI: 0000000000000000 [ 438.632089] RBP: ff4ed275a2158200 R08: 00000000ffffffff R09: 0000000000000020 [ 438.639222] R10: 0000000000000000 R11: 0000000000000020 R12: 0000000000001000 [ 438.646356] R13: 0000000000000000 R14: ff4ed275d0daffe0 R15: 0000000000000000 [ 438.653485] FS: 0000000000000000(0000) GS:ff4ed2738fa00000(0000) knlGS:0000000000000000 [ 438.661563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 438.667310] CR2: 0000000000000000 CR3: 0000007c9f0d6006 CR4: 0000000000771ef0 [ 438.674444] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 438.681573] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 438.688697] PKRU: 55555554 [ 438.691404] Call Trace: [ 438.693857] <IRQ> [ 438.695877] ? profile_tick+0x17/0x80 [ 438.699542] ice_msix_clean_ctrl_vsi+0x24/0x50 [ice] [ 438.702571] ice 0000:b1:00.0: VF 1: ctrl_vsi irq timeout [ 438.704542] __handle_irq_event_percpu+0x43/0x1a0 [ 438.704549] handle_irq_event+0x34/0x70 [ 438.704554] handle_edge_irq+0x9f/0x240 [ 438.709901] iavf 0000:b1:01.1: Failed to add Flow Director filter with status: 6 [ 438.714571] __common_interrupt+0x63/0x100 [ 438.714580] common_interrupt+0xb4/0xd0 [ 438.718424] iavf 0000:b1:01.1: Rule ID: 127 dst_ip: 0.0.0.0 src_ip 0.0.0.0 UDP: dst_port 4 src_port 0 [ 438.722255] </IRQ> [ 438.722257] <TASK> [ 438.722257] asm_common_interrupt+0x22/0x40 [ 438.722262] RIP: 0010:cpuidle_enter_state+0xc8/0x430 [ 438.722267] Code: 6e e9 25 ff e8 f9 ef ff ff 8b 53 04 49 89 c5 0f 1f 44 00 00 31 ff e8 d7 f1 24 ff 45 84 ff 0f 85 57 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 85 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 438.722269] RSP: 0018:ffffffff86003e50 EFLAGS: 00000246 [ 438.784108] RAX: ff4ed2738fa00000 RBX: ffbe72a64fc01020 RCX: 0000000000000000 [ 438.791234] RDX: 0000000000000000 RSI: ffffffff858d84de RDI: ffffffff85893641 [ 438.798365] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000003158af9d [ 438.805490] R10: 0000000000000008 R11: 0000000000000354 R12: ffffffff862365a0 [ 438.812622] R13: 000000661b472a87 R14: 0000000000000002 R15: 0000000000000000 [ 438.819757] cpuidle_enter+0x29/0x40 [ 438.823333] do_idle+0x1b6/0x230 [ 438.826566] cpu_startup_entry+0x19/0x20 [ 438.830492] rest_init+0xcb/0xd0 [ 438.833717] arch_call_rest_init+0xa/0x30 [ 438.837731] start_kernel+0x776/0xb70 [ 438.841396] secondary_startup_64_no_verify+0xe5/0xeb [ 438.846449] </TASK> Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/wireless/nl80211.c b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy") cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping") https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au tools/testing/selftests/net/Makefile 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16ice: xsk: disable txq irq before flushing hwMaciej Fijalkowski
ice_qp_dis() intends to stop a given queue pair that is a target of xsk pool attach/detach. One of the steps is to disable interrupts on these queues. It currently is broken in a way that txq irq is turned off *after* HW flush which in turn takes no effect. ice_qp_dis(): -> ice_qvec_dis_irq() --> disable rxq irq --> flush hw -> ice_vsi_stop_tx_ring() -->disable txq irq Below splat can be triggered by following steps: - start xdpsock WITHOUT loading xdp prog - run xdp_rxq_info with XDP_TX action on this interface - start traffic - terminate xdpsock [ 256.312485] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 256.319560] #PF: supervisor read access in kernel mode [ 256.324775] #PF: error_code(0x0000) - not-present page [ 256.329994] PGD 0 P4D 0 [ 256.332574] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 256.337006] CPU: 3 PID: 32 Comm: ksoftirqd/3 Tainted: G OE 6.2.0-rc5+ #51 [ 256.345218] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 256.355807] RIP: 0010:ice_clean_rx_irq_zc+0x9c/0x7d0 [ice] [ 256.361423] Code: b7 8f 8a 00 00 00 66 39 ca 0f 84 f1 04 00 00 49 8b 47 40 4c 8b 24 d0 41 0f b7 45 04 66 25 ff 3f 66 89 04 24 0f 84 85 02 00 00 <49> 8b 44 24 18 0f b7 14 24 48 05 00 01 00 00 49 89 04 24 49 89 44 [ 256.380463] RSP: 0018:ffffc900088bfd20 EFLAGS: 00010206 [ 256.385765] RAX: 000000000000003c RBX: 0000000000000035 RCX: 000000000000067f [ 256.393012] RDX: 0000000000000775 RSI: 0000000000000000 RDI: ffff8881deb3ac80 [ 256.400256] RBP: 000000000000003c R08: ffff889847982710 R09: 0000000000010000 [ 256.407500] R10: ffffffff82c060c0 R11: 0000000000000004 R12: 0000000000000000 [ 256.414746] R13: ffff88811165eea0 R14: ffffc9000d255000 R15: ffff888119b37600 [ 256.421990] FS: 0000000000000000(0000) GS:ffff8897e0cc0000(0000) knlGS:0000000000000000 [ 256.430207] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 256.436036] CR2: 0000000000000018 CR3: 0000000005c0a006 CR4: 00000000007706e0 [ 256.443283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 256.450527] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 256.457770] PKRU: 55555554 [ 256.460529] Call Trace: [ 256.463015] <TASK> [ 256.465157] ? ice_xmit_zc+0x6e/0x150 [ice] [ 256.469437] ice_napi_poll+0x46d/0x680 [ice] [ 256.473815] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 256.478863] __napi_poll+0x29/0x160 [ 256.482409] net_rx_action+0x136/0x260 [ 256.486222] __do_softirq+0xe8/0x2e5 [ 256.489853] ? smpboot_thread_fn+0x2c/0x270 [ 256.494108] run_ksoftirqd+0x2a/0x50 [ 256.497747] smpboot_thread_fn+0x1c1/0x270 [ 256.501907] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 256.506594] kthread+0xea/0x120 [ 256.509785] ? __pfx_kthread+0x10/0x10 [ 256.513597] ret_from_fork+0x29/0x50 [ 256.517238] </TASK> In fact, irqs were not disabled and napi managed to be scheduled and run while xsk_pool pointer was still valid, but SW ring of xdp_buff pointers was already freed. To fix this, call ice_qvec_dis_irq() after ice_vsi_stop_tx_ring(). Also while at it, remove redundant ice_clean_rx_ring() call - this is handled in ice_qp_clean_rings(). Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-15ice: avoid bonding causing auxiliary plug/unplug under RTNL lockDave Ertman
RDMA is not supported in ice on a PF that has been added to a bonded interface. To enforce this, when an interface enters a bond, we unplug the auxiliary device that supports RDMA functionality. This unplug currently happens in the context of handling the netdev bonding event. This event is sent to the ice driver under RTNL context. This is causing a deadlock where the RDMA driver is waiting for the RTNL lock to complete the removal. Defer the unplugging/re-plugging of the auxiliary device to the service task so that it is not performed under the RTNL lock context. Cc: stable@vger.kernel.org # 6.1.x Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/ Fixes: 5cb1ebdbc434 ("ice: Fix race condition during interface enslave") Fixes: 4eace75e0853 ("RDMA/irdma: Report the correct link speed") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13ice: call ice_is_malicious_vf() from ice_vc_process_vf_msg()Jacob Keller
The main loop in __ice_clean_ctrlq first checks if a VF might be malicious before calling ice_vc_process_vf_msg(). This results in duplicate code in both functions to obtain a reference to the VF, and exports the ice_is_malicious_vf() from ice_virtchnl.c unnecessarily. Refactor ice_is_malicious_vf() to be a static function that takes a pointer to the VF. Call this in ice_vc_process_vf_msg() just after we obtain a reference to the VF by calling ice_get_vf_by_id. Pass the mailbox data from the __ice_clean_ctrlq function into ice_vc_process_vf_msg() instead of calling ice_is_malicious_vf(). This reduces the number of exported functions and avoids the need to obtain the VF reference twice for every mailbox message. Note that the state check for ICE_VF_STATE_DIS is kept in ice_is_malicious_vf() and we call this before checking that state in ice_vc_process_vf_msg. This is intentional, as we stop responding to VF messages from a VF once we detect that it may be overflowing the mailbox. This ensures that we continue to silently ignore the message as before without responding via ice_vc_send_msg_to_vf(). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: move ice_is_malicious_vf() to ice_virtchnl.cJacob Keller
The ice_is_malicious_vf() function is currently implemented in ice_sriov.c This function is not Single Root specific, and a future change is going to refactor the ice_vc_process_vf_msg() function to call this instead of calling it before ice_vc_process_vf_msg() in the main loop of __ice_clean_ctrlq. To make that change easier to review, first move this function into ice_virtchnl.c but leave the call in __ice_clean_ctrlq() alone. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: print message if ice_mbx_vf_state_handler returns an errorJacob Keller
If ice_mbx_vf_state_handler() returns an error, the ice_is_malicious_vf() function just exits without printing anything. Instead, use dev_warn_ratelimited to print a warning that we were unable to check the status for this VF. The _ratelimited variant is used to avoid potentially spamming the log if this function is failing consistently for every single mailbox message. Also we can drop the "goto" as it simply skips over a report_malvf check. That variable should always be false if ice_mbx_vf_state_handler returns non-zero. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: pass mbxdata to ice_is_malicious_vf()Jacob Keller
The ice_is_malicious_vf() function takes information about the current state of the mailbox during a single interrupt. This information includes the number of messages processed so far, as well as the number of pending messages not yet processed. A future refactor is going to make ice_vc_process_vf_msg() call ice_is_malicious_vf() instead of having it called separately in ice_main.c This change will require passing all the necessary arguments into ice_vc_process_vf_msg(). To make this simpler, have the main loop fill in the struct ice_mbx_data and pass that rather than passing in the num_msg_proc and num_msg_pending. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: remove unnecessary &array[0] and just use arrayJacob Keller
In ice_is_malicious_vf we print the VF MAC address using %pM by passing the address of the first element of vf->dev_lan_addr. This is equivalent to just passing vf->dev_lan_addr, so do that. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: always report VF overflowing mailbox even without PF VSIJacob Keller
In ice_is_malicious_vf we report a message warning the system administrator when a VF is potentially spamming the PF with asynchronous messages that could overflow the PF mailbox. The specific message was requested by our customer support team to include the VF and PF MAC address. In some cases we may not be able to locate the PF VSI to obtain the MAC address for the PF. The current implementation discards the message entirely in this case. Fix this to instead print a zero address in that case so that we always print something here. Note that dev_warn will also include the PCI device information allowing another mechanism for determining on which PF the potentially malicious VF belongs. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: declare ice_vc_process_vf_msg in ice_virtchnl.hJacob Keller
The ice_vc_process_vf_msg function is the main entry point for handling virtchnl messages. This function is defined in ice_virtchnl.c but its declaration is still in ice_sriov.c The ice_sriov.c file used to contain all of the virtualization logic until commit bf93bf791cec ("ice: introduce ice_virtchnl.c and ice_virtchnl.h") moved the virtchnl logic to its own file. The ice_vc_process_vf_msg function should have had its declaration moved to ice_virtchnl.h then. Fix this. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: initialize mailbox snapshot earlier in PF initJacob Keller
Now that we no longer depend on the number of VFs being allocated, we can move the ice_mbx_init_snapshot function earlier. This will be required by Scalable IOV as we will not be calling ice_sriov_configure for Scalable VFs. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: merge ice_mbx_report_malvf with ice_mbx_vf_state_handlerJacob Keller
The ice_mbx_report_malvf function is used to update the ice_mbx_vf_info.malicious member after we detect a malicious VF. This is done by calling ice_mbx_report_malvf after ice_mbx_vf_state_handler sets its "is_malvf" return parameter true. Instead of requiring two steps, directly update the malicious bit in the state handler, and remove the need for separately calling ice_mbx_report_malvf. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: remove ice_mbx_deinit_snapshotJacob Keller
The ice_mbx_deinit_snapshot function's only remaining job is to clear the previous snapshot data. This snapshot data is initialized when SR-IOV adds VFs, so it is not necessary to clear this data when removing VFs. Since no allocation occurs we no longer need to free anything and we can safely remove this function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: move VF overflow message count into struct ice_mbx_vf_infoJacob Keller
The ice driver has some logic in ice_vf_mbx.c used to detect potentially malicious VF behavior with regards to overflowing the PF mailbox. This logic currently stores message counts in struct ice_mbx_vf_counter.vf_cntr as an array. This array is allocated during initialization with ice_mbx_init_snapshot. This logic makes sense for SR-IOV where all VFs are allocated at once up front. However, in the future with Scalable IOV this logic will not work. VFs can be added and removed dynamically. We could try to keep the vf_cntr array for the maximum possible number of VFs, but this is a waste of memory. Use the recently introduced struct ice_mbx_vf_info structure to store the message count. Pass a pointer to the mbx_info for a VF instead of using its VF ID. Replace the array of VF message counts with a linked list that tracks all currently active mailbox tracking info structures. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: track malicious VFs in new ice_mbx_vf_info structureJacob Keller
Currently the PF tracks malicious VFs in a malvfs bitmap which is used by the ice_mbx_clear_malvf and ice_mbx_report_malvf functions. This bitmap is used to ensure that we only report a VF as malicious once rather than continuously spamming the event log. This mechanism of storage for the malicious indication works well enough for SR-IOV. However, it will not work with Scalable IOV. This is because Scalable IOV VFs can be allocated dynamically and might change VF ID when their underlying VSI changes. To support this, the mailbox overflow logic will need to be refactored. First, introduce a new ice_mbx_vf_info structure which will be used to store data about a VF. Embed this structure in the struct ice_vf, and ensure it gets initialized when a new VF is created. For now this only stores the malicious indicator bit. Pass a pointer to the VF's mbx_info structure instead of using a bitmap to keep track of these bits. A future change will extend this structure and the rest of the logic associated with the overflow detection. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: convert ice_mbx_clear_malvf to void and use WARNJacob Keller
The ice_mbx_clear_malvf function checks for a few error conditions before clearing the appropriate data. These error conditions are really warnings that should never occur in a properly initialized driver. Every caller of ice_mbx_clear_malvf just prints a dev_dbg message on failure which will generally be ignored. Convert this function to void and switch the error return values to WARN_ON. This will make any potentially misconfiguration more visible and makes future refactors that involve changing how we store the malicious VF data easier. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: re-order ice_mbx_reset_snapshot functionJacob Keller
A future change is going to refactor the VF mailbox overflow detection logic, including modifying ice_mbx_reset_snapshot and its callers. To make this change easier to review, first move the ice_mbx_reset_snapshot function higher in the ice_vf_mbx.c file. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Documentation/bpf/bpf_devel_QA.rst b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info") d56b0c461d19 ("bpf, docs: Fix link to netdev-FAQ target") https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08ice: Remove unnecessary aer.h includeBjorn Helgaas
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-07ethernet: ice: avoid gcc-9 integer overflow warningArnd Bergmann
With older compilers like gcc-9, the calculation of the vlan priority field causes a false-positive warning from the byteswap: In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4: drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower': include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow] 15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \ | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16' 106 | ___constant_swab16(x) : \ | ^~~~~~~~~~~~~~~~~~ include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16' 42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x))) | ^~~~~~~~ include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16' 96 | #define cpu_to_be16 __cpu_to_be16 | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16' 1458 | cpu_to_be16((match.key->vlan_priority << | ^~~~~~~~~~~ After a change to be16_encode_bits(), the code becomes more readable to both people and compilers, which avoids the warning. Fixes: 34800178b302 ("ice: Add support for VLAN priority filters in switchdev") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07ice: don't ignore return codes in VSI related codeMichal Swiatkowski
There were few smatch warnings reported by Dan: - ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner - return values in ice_vsi_cfg_def were ignored - in ice_vsi_rebuild return value was ignored in case rebuild failed, it was a never reached code, however, rewrite it for clarity. - ice_vsi_cfg_tc can return 0 instead of ret Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07ice: Fix DSCP PFC TLV creationDave Ertman
When creating the TLV to send to the FW for configuring DSCP mode PFC,the PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8 bit bitmask for enabled classes for PFC. This means that traffic classes 4-7 could not be enabled for PFC. Remove the mask completely, as it is not necessary, as we are assigning 8 bits to an 8 bit field. Fixes: 2a87bd73e50d ("ice: Add DSCP support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-03ice: copy last block omitted in ice_get_module_eeprom()Petr Oros
ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ .... Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-26ice: remove unnecessary CONFIG_ICE_GNSSJacob Keller
CONFIG_ICE_GNSS was added by commit c7ef8221ca7d ("ice: use GNSS subsystem instead of TTY") as a way to allow the ice driver to optionally support GNSS features without forcing a dependency on CONFIG_GNSS. The original implementation of that commit at [1] used IS_REACHABLE. This was rejected by Olek at [2] with the suggested implementation of CONFIG_ICE_GNSS. Eventually after merging, Linus reported a .config which had CONFIG_ICE_GNSS = y when both GNSS = n and ICE = n. This confused him and he felt that the config option was not useful, and commented about it at [3]. CONFIG_ICE_GNSS is defined to y whenever GNSS = ICE. This results in it being set in cases where both options are not enabled. The goal of CONFIG_ICE_GNSS is to ensure that the GNSS support in the ice driver is enabled when GNSS is enabled. The complaint from Olek about the original IS_REACHABLE was due to the required IS_REACHABLE checks throughout the ice driver code and the fact that ice_gnss.c was compiled regardless of GNSS support. This can be fixed in the Makefile by using ice-$(CONFIG_GNSS) += ice_gnss.o In this case, if GNSS = m and ICE = y, we can result in some confusing behavior where GNSS support is not enabled because its not built in. See [4]. To disallow this, have CONFIG_ICE depend on GNSS || GNSS = n. This ensures that we cannot enable CONFIG_ICE as builtin while GNSS is a module. Drop CONFIG_ICE_GNSS, and replace the IS_ENABLED checks for it with checks for GNSS. Update the Makefile to add the ice_gnss.o object based on CONFIG_GNSS. This works to ensure that GNSS support can optionally be enabled, doesn't have an unnnecessary extra config option, and has Kbuild enforce the dependency such that you can't accidentally enable GNSS as a module and ICE as a builtin. [1] https://lore.kernel.org/intel-wired-lan/20221019095603.44825-1-arkadiusz.kubalewski@intel.com/ [2] https://lore.kernel.org/intel-wired-lan/20221028165706.96849-1-alexandr.lobakin@intel.com/ [3] https://lore.kernel.org/all/CAHk-=wi_410KZqHwF-WL5U7QYxnpHHHNP-3xL=g_y89XnKc-uw@mail.gmail.com/ [4] https://lore.kernel.org/netdev/20230223161309.0e439c5f@kernel.org/ Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Fixes: c7ef8221ca7d ("ice: use GNSS subsystem instead of TTY") Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Cc: Alexander Lobakin <alexandr.lobakin@intel.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Anthony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-20Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-02-17 We've added 64 non-merge commits during the last 7 day(s) which contain a total of 158 files changed, 4190 insertions(+), 988 deletions(-). The main changes are: 1) Add a rbtree data structure following the "next-gen data structure" precedent set by recently-added linked-list, that is, by using kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky. 2) Add a new benchmark for hashmap lookups to BPF selftests, from Anton Protopopov. 3) Fix bpf_fib_lookup to only return valid neighbors and add an option to skip the neigh table lookup, from Martin KaFai Lau. 4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accouting for container environments, from Yafang Shao. 5) Batch of ice multi-buffer and driver performance fixes, from Alexander Lobakin. 6) Fix a bug in determining whether global subprog's argument is PTR_TO_CTX, which is based on type names which breaks kprobe progs, from Andrii Nakryiko. 7) Prep work for future -mcpu=v4 LLVM option which includes usage of BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier, from Eduard Zingerman. 8) More prep work for later building selftests with Memory Sanitizer in order to detect usages of undefined memory, from Ilya Leoshkevich. 9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer dereference via sendmsg(), from Maciej Fijalkowski. 10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui. 11) Fix BPF memory allocator in combination with BPF hashtab where it could corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao. 12) Fix LoongArch BPF JIT to always use 4 instructions for function address so that instruction sequences don't change between passes, from Hengqi Chen. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits) selftests/bpf: Add bpf_fib_lookup test bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup riscv, bpf: Add bpf trampoline support for RV64 riscv, bpf: Add bpf_arch_text_poke support for RV64 riscv, bpf: Factor out emit_call for kernel and bpf context riscv: Extend patch_text for multiple instructions Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES" selftests/bpf: Add global subprog context passing tests selftests/bpf: Convert test_global_funcs test to test_loader framework bpf: Fix global subprog context argument resolution logic LoongArch, bpf: Use 4 instructions for function address in JIT bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state bpf: Disable bh in bpf_test_run for xdp and tc prog xsk: check IFF_UP earlier in Tx path Fix typos in selftest/bpf files selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd() libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd() ... ==================== Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-20ice: properly alloc ICE_VSI_LBMichal Swiatkowski
Devlink reload patchset introduced regression. ICE_VSI_LB wasn't taken into account when doing default allocation. Fix it by adding a case for ICE_VSI_LB in ice_vsi_alloc_def(). Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Some of the devlink bits were tricky, but I think I got it right. Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-02-14 (ice) This series contains updates to ice driver only. Karol extends support for GPIO pins to E823 devices. Daniel Vacek stops processing of PTP packets when link is down. Pawel adds support for BIG TCP for IPv6. Tony changes return type of ice_vsi_realloc_stat_arrays() as it always returns success. Zhu Yanjun updates kdoc stating supported TLVs. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Mention CEE DCBX in code comment ice: Change ice_vsi_realloc_stat_arrays() to void ice: add support BIG TCP on IPv6 ice/ptp: fix the PTP worker retrying indefinitely if the link went down ice: Add GPIO pin support for E823 products ==================== Link: https://lore.kernel.org/r/20230214213003.2117125-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-15ice: update xdp_features with xdp multi-buffLorenzo Bianconi
Now ice driver supports xdp multi-buffer so add it to xdp_features. Check vsi type before setting xdp_features flag. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/8a4781511ab6e3cd280e944eef69158954f1a15f.1676385351.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-14ice: Mention CEE DCBX in code commentZhu Yanjun
From the function ice_parse_org_tlv, CEE DCBX TLV is also supported. So update the comment. Or else, it is confusing. Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-14ice: Change ice_vsi_realloc_stat_arrays() to voidTony Nguyen
smatch reports: smatch warnings: drivers/net/ethernet/intel/ice/ice_lib.c:3612 ice_vsi_rebuild() warn: missing error code 'ret' If an error is encountered for ice_vsi_realloc_stat_arrays(), ret is not assigned an error value so the goto error path would return success. The function, however, only returns 0 so an error will never be reported; due to this, change the function to return void. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
2023-02-14ice: add support BIG TCP on IPv6Pawel Chmielewski
Enable sending BIG TCP packets on IPv6 in the ice driver using generic ipv6_hopopt_jumbo_remove helper for stripping HBH header. Tested: netperf -t TCP_RR -H 2001:db8:0:f101::1 -- -r80000,80000 -O MIN_LATENCY,P90_LATENCY,P99_LATENCY,TRANSACTION_RATE Tested on two different setups. In both cases, the following settings were applied after loading the changed driver: ip link set dev enp175s0f1np1 gso_max_size 130000 ip link set dev enp175s0f1np1 gro_max_size 130000 ip link set dev enp175s0f1np1 mtu 9000 First setup: Before: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 134 279 410 3961.584 After: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 135 178 216 6093.404 The other setup: Before: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 218 414 478 2944.765 After: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 146 238 266 4700.596 Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-14ice/ptp: fix the PTP worker retrying indefinitely if the link went downDaniel Vacek
When the link goes down the ice_ptp_tx_tstamp() may loop re-trying to process the packets till the 2 seconds timeout finally drops them. In such a case it makes sense to just drop them right away. Signed-off-by: Daniel Vacek <neelx@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-14ice: Add GPIO pin support for E823 productsKarol Kolacinski
Add GPIO pin setup for E823, which is only 1PPS input and output. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-13ice: fix lost multicast packets in promisc modeJesse Brandeburg
There was a problem reported to us where the addition of a VF with an IPv6 address ending with a particular sequence would cause the parent device on the PF to no longer be able to respond to neighbor discovery packets. In this case, we had an ovs-bridge device living on top of a VLAN, which was on top of a PF, and it would not be able to talk anymore (the neighbor entry would expire and couldn't be restored). The root cause of the issue is that if the PF is asked to be in IFF_PROMISC mode (promiscuous mode) and it had an ipv6 address that needed the 33:33:ff:00:00:04 multicast address to work, then when the VF was added with the need for the same multicast address, the VF would steal all the traffic destined for that address. The ice driver didn't auto-subscribe a request of IFF_PROMISC to the "multicast replication from other port's traffic" meaning that it won't get for instance, packets with an exact destination in the VF, as above. The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04, results in no packets for that multicast address making it to the PF (which is in promisc but NOT "multicast replication"). The fix is to enable "multicast promiscuous" whenever the driver is asked to enable IFF_PROMISC, and make sure to disable it when appropriate. Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-13ice: Micro-optimize .ndo_xdp_xmit() pathAlexander Lobakin
After the recent mbuf changes, ice_xmit_xdp_ring() became a 3-liner. It makes no sense to keep it global in a different file than its caller. Move it just next to the sole call site and mark static. Also, it doesn't need a full xdp_convert_frame_to_buff(). Save several cycles and fill only the fields used by __ice_xmit_xdp_ring() later on. Finally, since it doesn't modify @xdpf anyhow, mark the argument const to save some more (whole -11 bytes of .text! :D). Thanks to 1 jump less and less calcs as well, this yields as many as 6.7 Mpps per queue. `xdp.data_hard_start = xdpf` is fully intentional again (see xdp_convert_buff_to_frame()) and just works when there are no source device's driver issues. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-7-alexandr.lobakin@intel.com
2023-02-13ice: Fix freeing XDP frames backed by Page PoolAlexander Lobakin
As already mentioned, freeing any &xdp_frame via page_frag_free() is wrong, as it assumes the frame is backed by either an order-0 page or a page with no "patrons" behind them, while in fact frames backed by Page Pool can be redirected to a device, which's driver doesn't use it. Keep storing a pointer to the raw buffer and then freeing it unconditionally via page_frag_free() for %XDP_TX frames, but introduce a separate type in the enum for frames coming through .ndo_xdp_xmit(), and free them via xdp_return_frame_bulk(). Note that saving xdpf as xdp_buff->data_hard_start is intentional and is always true when everything is configured properly. After this change, %XDP_REDIRECT from a Page Pool based driver to ice becomes zero-alloc as it should be and horrendous 3.3 Mpps / queue turn into 6.6, hehe. Let it go with no "Fixes:" tag as it spans across good 5+ commits and can't be trivially backported. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-6-alexandr.lobakin@intel.com
2023-02-13ice: Robustify cleaning/completing XDP Tx buffersAlexander Lobakin
When queueing frames from a Page Pool for redirecting to a device backed by the ice driver, `perf top` shows heavy load on page_alloc() and page_frag_free(), despite that on a properly working system it must be fully or at least almost zero-alloc. The problem is in fact a bit deeper and raises from how ice cleans up completed Tx buffers. The story so far: when cleaning/freeing the resources related to a particular completed Tx frame (skbs, DMA mappings etc.), ice uses some heuristics only without setting any type explicitly (except for dummy Flow Director packets, which are marked via ice_tx_buf::tx_flags). This kinda works, but only up to some point. For example, currently ice assumes that each frame coming to __ice_xmit_xdp_ring(), is backed by either plain order-0 page or plain page frag, while it may also be backed by Page Pool or any other possible memory models introduced in future. This means any &xdp_frame must be freed properly via xdp_return_frame() family with no assumptions. In order to do that, the whole heuristics must be replaced with setting the Tx buffer/frame type explicitly, just how it's always been done via an enum. Let us reuse 16 bits from ::tx_flags -- 1 bit-and instr won't hurt much -- especially given that sometimes there was a check for %ICE_TX_FLAGS_DUMMY_PKT, which is now turned from a flag to an enum member. The rest of the changes is straightforward and most of it is just a conversion to rely now on the type set in &ice_tx_buf rather than to some secondary properties. For now, no functional changes intended, the change only prepares the ground for starting freeing XDP frames properly next step. And it must be done atomically/synchronously to not break stuff. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-5-alexandr.lobakin@intel.com
2023-02-13ice: Remove two impossible branches on XDP Tx cleaningAlexander Lobakin
The tagged commit started sending %XDP_TX frames from XSk Rx ring directly without converting it to an &xdp_frame. However, when XSk is enabled on a queue pair, it has its separate Tx cleaning functions, so neither ice_clean_xdp_irq() nor ice_unmap_and_free_tx_buf() ever happens there. Remove impossible branches in order to reduce the diffstat of the upcoming change. Fixes: a24b4c6e9aab ("ice: xsk: Do not convert to buff to frame for XDP_TX") Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-4-alexandr.lobakin@intel.com
2023-02-13ice: Fix XDP Tx ring overrunAlexander Lobakin
Sometimes, under heavy XDP Tx traffic, e.g. when using XDP traffic generator (%BPF_F_TEST_XDP_LIVE_FRAMES), the machine can catch OOM due to the driver not freeing all of the pages passed to it by .ndo_xdp_xmit(). Turned out that during the development of the tagged commit, the check, which ensures that we have a free descriptor to queue a frame, moved into the branch happening only when a buffer has frags. Otherwise, we only run a cleaning cycle, but don't check anything. ATST, there can be situations when the driver gets new frames to send, but there are no buffers that can be cleaned/completed and the ring has no free slots. It's very rare, but still possible (> 6.5 Mpps per ring). The driver then fills the next buffer/descriptor, effectively overwriting the data, which still needs to be freed. Restore the check after the cleaning routine to make sure there is a slot to queue a new frame. When there are frags, there still will be a separate check that we can place all of them, but if the ring is full, there's no point in wasting any more time. (minor: make `!ready_frames` unlikely since it happens ~1-2 times per billion of frames) Fixes: 3246a10752a7 ("ice: Add support for XDP multi-buffer on Tx side") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-3-alexandr.lobakin@intel.com
2023-02-13ice: fix ice_tx_ring:: Xdp_tx_active underflowAlexander Lobakin
xdp_tx_active is used to indicate whether an XDP ring has any %XDP_TX frames queued to shortcut processing Tx cleaning for XSk-enabled queues. When !XSk, it simply indicates whether the ring has any queued frames in general. It gets increased on each frame placed onto the ring and counts the whole frame, not each frag. However, currently it gets decremented in ice_clean_xdp_tx_buf(), which is called per each buffer, i.e. per each frag. Thus, on completing multi-frag frames, an underflow happens. Move the decrement to the outer function and do it once per frame, not buf. Also, do that on the stack and update the ring counter after the loop is done to save several cycles. XSk rings are fine since there are no frags at the moment. Fixes: 3246a10752a7 ("ice: Add support for XDP multi-buffer on Tx side") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20230210170618.1973430-2-alexandr.lobakin@intel.com
2023-02-13ice: Fix check for weight and priority of a scheduling nodeMichal Wilczynski
Currently checks for weight and priority ranges don't check incoming value from the devlink. Instead it checks node current weight or priority. This makes those checks useless. Change range checks in ice_set_object_tx_priority() and ice_set_object_tx_weight() to check against incoming priority an weight. Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API") Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-10ice: xsk: Fix cleaning of XDP_TX framesLarysa Zaremba
Incrementation of xsk_frames inside the for-loop produces infinite loop, if we have both normal AF_XDP-TX and XDP_TXed buffers to complete. Split xsk_frames into 2 variables (xsk_frames and completed_frames) to eliminate this bug. Fixes: 29322791bc8b ("ice: xsk: change batched Tx descriptor cleaning") Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230209160130.1779890-1-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-10Daniel Borkmann says:Jakub Kicinski
==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit 5b246e533d01 ("ice: split probe into smaller functions") from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev() is otherwise there a 2nd time, and add XDP features to the existing ice_cfg_netdev() one: [...] ice_set_netdev_features(netdev); netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | NETDEV_XDP_ACT_XSK_ZEROCOPY; ice_set_ops(netdev); [...] Stephen's merge conflict mail: https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/ The main changes are: 1) Add support for BPF trampoline on s390x which finally allows to remove many test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich. 2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski. 3) Add capability to export the XDP features supported by the NIC. Along with that, add a XDP compliance test tool, from Lorenzo Bianconi & Marek Majtyka. 4) Add __bpf_kfunc tag for marking kernel functions as kfuncs, from David Vernet. 5) Add a deep dive documentation about the verifier's register liveness tracking algorithm, from Eduard Zingerman. 6) Fix and follow-up cleanups for resolve_btfids to be compiled as a host program to avoid cross compile issues, from Jiri Olsa & Ian Rogers. 7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted when testing on different NICs, from Jesper Dangaard Brouer. 8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang. 9) Extend libbpf to add an option for when the perf buffer should wake up, from Jon Doron. 10) Follow-up fix on xdp_metadata selftest to just consume on TX completion, from Stanislav Fomichev. 11) Extend the kfuncs.rst document with description on kfunc lifecycle & stability expectations, from David Vernet. 12) Fix bpftool prog profile to skip attaching to offline CPUs, from Tonghao Zhang. ==================== Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-29 07:27:48 +0000