summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2023-03-28ice: add profile conflict check for AVF FDIRJunfeng Guo
Add profile conflict check while adding some FDIR rules to avoid unexpected flow behavior, rules may have conflict including: IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP} IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP} For example, when we create an FDIR rule for IPv4, this rule will work on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we then create an FDIR rule for IPv4_UDP and then destroy it, the first FDIR rule for IPv4 cannot work on pkt IPv4_UDP then. To prevent this unexpected behavior, we add restriction in software when creating FDIR rules by adding necessary profile conflict check. Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-28ice: Fix ice_cfg_rdma_fltr() to only update relevant fieldsBrett Creeley
The current implementation causes ice_vsi_update() to update all VSI fields based on the cached VSI context. This also assumes that the ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the VSI context is not correctly synced by the driver. Fix this by only updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID. Also, make sure to save the updated result in the cached VSI context on success. Fixes: 348048e724a0 ("ice: Implement iidc operations") Co-developed-by: Robert Malz <robertx.malz@intel.com> Signed-off-by: Robert Malz <robertx.malz@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-28ice: fix W=1 headers mismatchJesse Brandeburg
make modules W=1 returns: .../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx' .../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf' .../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb' Fix these warnings by adding and deleting the deviant arguments. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Fixes: d7956d81f150 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()") CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/20230324120623.4ebbc66f@canb.auug.org.au/ https://lore.kernel.org/all/20230321211135.47711-1-saeed@kernel.org/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-21 (ice) This series contains updates to ice driver only. Piotr sets first_desc field for proper handling of Flow Director packets. Michal moves error checking for VF earlier in function to properly return error before other checks/reporting; he also corrects VSI filter removal to be done during VSI removal and not rebuild. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: remove filters only if VSI is deleted ice: check if VF exists before mode check ice: fix rx buffers handling for flow director packets ==================== Link: https://lore.kernel.org/r/20230321183641.2849726-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-21igc: Remove obsolete DMA coalescing codeSasha Neftin
DMA coalescing is not applicable for i225 parts. This patch comes to tidy up the driver code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21igbvf: add PCI reset handler functionsDawid Wesierski
There was a problem with resuming ping after conducting a PCI reset. This commit adds two functions, igbvf_io_prepare and igbvf_io_done, which, after being added to the pci_error_handlers struct, will prepare the drivers for a PCI reset and then bring the interface up and reset it after. This will prevent the driver from ending up in incorrect state. Test_and_set_bit is highly reliable in this context, so we are not including a timeout in this commit This introduces 900ms - 1100ms of overhead to this operation but it's in non-time-critical flow. And also allows the driver to continue functioning after the reset. Functionality documented in ethernet-controller-i350-datasheet 4.2.1.3 https://www.intel.com/content/www/us/en/products/details/ethernet/gigabit-controllers/i350-controllers/docs.html Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21igb: refactor igb_ptp_adjfine_82580 to use diff_by_scaled_ppmAndrii Staikov
Driver's .adjfine interface functions use adjust_by_scaled_ppm and diff_by_scaled_ppm introduced in commit 1060707e3809 ("ptp: introduce helpers to adjust by scaled parts per million") to calculate the required adjustment in a concise manner, but not igb_ptp_adjfine_82580. Fix it by introducing IGB_82580_BASE_PERIOD and changing function logic to use diff_by_scaled_ppm. Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21i40e: fix flow director packet filter programmingRadoslaw Tyl
Initialize to zero structures to build a valid Tx Packet used for the filter programming. Fixes: a9219b332f52 ("i40e: VLAN field for flow director") Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21iavf: fix hang on reboot with iceStefan Assmann
When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") Fixes: a8417330f8a5 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <mcornea@redhat.com> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: remove filters only if VSI is deletedMichal Swiatkowski
Filters shouldn't be removed in VSI rebuild path. Removing them on PF VSI results in no rule for PF MAC after changing for example queues amount. Remove all filters only in the VSI remove flow. As unload should also cause the filter to be removed introduce, a new function ice_stop_eth(). It will unroll ice_start_eth(), so remove filters and close VSI. Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: check if VF exists before mode checkMichal Swiatkowski
Setting trust on VF should return EINVAL when there is no VF. Move checking for switchdev mode after checking if VF exists. Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by: Kalyan Kodamagula <kalyan.kodamagula@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: fix rx buffers handling for flow director packetsPiotr Raczynski
Adding flow director filters stopped working correctly after commit 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side"). As a result, only first flow director filter can be added, adding next filter leads to NULL pointer dereference attached below. Rx buffer handling and reallocation logic has been optimized, however flow director specific traffic was not accounted for. As a result driver handled those packets incorrectly since new logic was based on ice_rx_ring::first_desc which was not set in this case. Fix this by setting struct ice_rx_ring::first_desc to next_to_clean for flow director received packets. [ 438.544867] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 438.551840] #PF: supervisor read access in kernel mode [ 438.556978] #PF: error_code(0x0000) - not-present page [ 438.562115] PGD 7c953b2067 P4D 0 [ 438.565436] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 438.569794] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.2.0-net-bug #1 [ 438.577531] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [ 438.588470] RIP: 0010:ice_clean_rx_irq+0x2b9/0xf20 [ice] [ 438.593860] Code: 45 89 f7 e9 ac 00 00 00 8b 4d 78 41 31 4e 10 41 09 d5 4d 85 f6 0f 84 82 00 00 00 49 8b 4e 08 41 8b 76 1c 65 8b 3d 47 36 4a 3f <48> 8b 11 48 c1 ea 36 39 d7 0f 85 a6 00 00 00 f6 41 08 02 0f 85 9c [ 438.612605] RSP: 0018:ff8c732640003ec8 EFLAGS: 00010082 [ 438.617831] RAX: 0000000000000800 RBX: 00000000000007ff RCX: 0000000000000000 [ 438.624957] RDX: 0000000000000800 RSI: 0000000000000000 RDI: 0000000000000000 [ 438.632089] RBP: ff4ed275a2158200 R08: 00000000ffffffff R09: 0000000000000020 [ 438.639222] R10: 0000000000000000 R11: 0000000000000020 R12: 0000000000001000 [ 438.646356] R13: 0000000000000000 R14: ff4ed275d0daffe0 R15: 0000000000000000 [ 438.653485] FS: 0000000000000000(0000) GS:ff4ed2738fa00000(0000) knlGS:0000000000000000 [ 438.661563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 438.667310] CR2: 0000000000000000 CR3: 0000007c9f0d6006 CR4: 0000000000771ef0 [ 438.674444] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 438.681573] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 438.688697] PKRU: 55555554 [ 438.691404] Call Trace: [ 438.693857] <IRQ> [ 438.695877] ? profile_tick+0x17/0x80 [ 438.699542] ice_msix_clean_ctrl_vsi+0x24/0x50 [ice] [ 438.702571] ice 0000:b1:00.0: VF 1: ctrl_vsi irq timeout [ 438.704542] __handle_irq_event_percpu+0x43/0x1a0 [ 438.704549] handle_irq_event+0x34/0x70 [ 438.704554] handle_edge_irq+0x9f/0x240 [ 438.709901] iavf 0000:b1:01.1: Failed to add Flow Director filter with status: 6 [ 438.714571] __common_interrupt+0x63/0x100 [ 438.714580] common_interrupt+0xb4/0xd0 [ 438.718424] iavf 0000:b1:01.1: Rule ID: 127 dst_ip: 0.0.0.0 src_ip 0.0.0.0 UDP: dst_port 4 src_port 0 [ 438.722255] </IRQ> [ 438.722257] <TASK> [ 438.722257] asm_common_interrupt+0x22/0x40 [ 438.722262] RIP: 0010:cpuidle_enter_state+0xc8/0x430 [ 438.722267] Code: 6e e9 25 ff e8 f9 ef ff ff 8b 53 04 49 89 c5 0f 1f 44 00 00 31 ff e8 d7 f1 24 ff 45 84 ff 0f 85 57 02 00 00 fb 0f 1f 44 00 00 <45> 85 f6 0f 88 85 01 00 00 49 63 d6 48 8d 04 52 48 8d 04 82 49 8d [ 438.722269] RSP: 0018:ffffffff86003e50 EFLAGS: 00000246 [ 438.784108] RAX: ff4ed2738fa00000 RBX: ffbe72a64fc01020 RCX: 0000000000000000 [ 438.791234] RDX: 0000000000000000 RSI: ffffffff858d84de RDI: ffffffff85893641 [ 438.798365] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000003158af9d [ 438.805490] R10: 0000000000000008 R11: 0000000000000354 R12: ffffffff862365a0 [ 438.812622] R13: 000000661b472a87 R14: 0000000000000002 R15: 0000000000000000 [ 438.819757] cpuidle_enter+0x29/0x40 [ 438.823333] do_idle+0x1b6/0x230 [ 438.826566] cpu_startup_entry+0x19/0x20 [ 438.830492] rest_init+0xcb/0xd0 [ 438.833717] arch_call_rest_init+0xa/0x30 [ 438.837731] start_kernel+0x776/0xb70 [ 438.841396] secondary_startup_64_no_verify+0xe5/0xeb [ 438.846449] </TASK> Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-19ixgb: Remove ixgb driverTony Nguyen
There are likely no users of this driver as the hardware has been discontinued since 2010. Remove the driver and all references to it in documentation. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-19Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-16 (igb, igbvf, igc) This series contains updates to igb, igbvf, and igc drivers. Lin Ma removes rtnl_lock() when disabling SRIOV on remove which was causing deadlock on igb. Akihiko Odaki delays enabling of SRIOV on igb to prevent early messages that could get ignored and clears MAC address when PF returns nack on reset; indicating no MAC address was assigned for igbvf. Gaosheng Cui frees IRQs in error path for igbvf. Akashi Takahiro fixes logic on checking TAPRIO gate support for igc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-17Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-16 (iavf) This series contains updates to iavf driver only. Alex fixes incorrect check against Rx hash feature and corrects payload value for IPv6 UDP packet. Ahmed removes bookkeeping of VLAN 0 filter as it always exists and can cause a false max filter error message. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: do not track VLAN 0 filters iavf: fix non-tunneled IPv6 UDP packet type and hashing iavf: fix inverted Rx hash condition leading to disabled hash ==================== Link: https://lore.kernel.org/r/20230316155316.1554931-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/wireless/nl80211.c b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy") cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping") https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au tools/testing/selftests/net/Makefile 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16ice: xsk: disable txq irq before flushing hwMaciej Fijalkowski
ice_qp_dis() intends to stop a given queue pair that is a target of xsk pool attach/detach. One of the steps is to disable interrupts on these queues. It currently is broken in a way that txq irq is turned off *after* HW flush which in turn takes no effect. ice_qp_dis(): -> ice_qvec_dis_irq() --> disable rxq irq --> flush hw -> ice_vsi_stop_tx_ring() -->disable txq irq Below splat can be triggered by following steps: - start xdpsock WITHOUT loading xdp prog - run xdp_rxq_info with XDP_TX action on this interface - start traffic - terminate xdpsock [ 256.312485] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 256.319560] #PF: supervisor read access in kernel mode [ 256.324775] #PF: error_code(0x0000) - not-present page [ 256.329994] PGD 0 P4D 0 [ 256.332574] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 256.337006] CPU: 3 PID: 32 Comm: ksoftirqd/3 Tainted: G OE 6.2.0-rc5+ #51 [ 256.345218] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 256.355807] RIP: 0010:ice_clean_rx_irq_zc+0x9c/0x7d0 [ice] [ 256.361423] Code: b7 8f 8a 00 00 00 66 39 ca 0f 84 f1 04 00 00 49 8b 47 40 4c 8b 24 d0 41 0f b7 45 04 66 25 ff 3f 66 89 04 24 0f 84 85 02 00 00 <49> 8b 44 24 18 0f b7 14 24 48 05 00 01 00 00 49 89 04 24 49 89 44 [ 256.380463] RSP: 0018:ffffc900088bfd20 EFLAGS: 00010206 [ 256.385765] RAX: 000000000000003c RBX: 0000000000000035 RCX: 000000000000067f [ 256.393012] RDX: 0000000000000775 RSI: 0000000000000000 RDI: ffff8881deb3ac80 [ 256.400256] RBP: 000000000000003c R08: ffff889847982710 R09: 0000000000010000 [ 256.407500] R10: ffffffff82c060c0 R11: 0000000000000004 R12: 0000000000000000 [ 256.414746] R13: ffff88811165eea0 R14: ffffc9000d255000 R15: ffff888119b37600 [ 256.421990] FS: 0000000000000000(0000) GS:ffff8897e0cc0000(0000) knlGS:0000000000000000 [ 256.430207] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 256.436036] CR2: 0000000000000018 CR3: 0000000005c0a006 CR4: 00000000007706e0 [ 256.443283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 256.450527] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 256.457770] PKRU: 55555554 [ 256.460529] Call Trace: [ 256.463015] <TASK> [ 256.465157] ? ice_xmit_zc+0x6e/0x150 [ice] [ 256.469437] ice_napi_poll+0x46d/0x680 [ice] [ 256.473815] ? _raw_spin_unlock_irqrestore+0x1b/0x40 [ 256.478863] __napi_poll+0x29/0x160 [ 256.482409] net_rx_action+0x136/0x260 [ 256.486222] __do_softirq+0xe8/0x2e5 [ 256.489853] ? smpboot_thread_fn+0x2c/0x270 [ 256.494108] run_ksoftirqd+0x2a/0x50 [ 256.497747] smpboot_thread_fn+0x1c1/0x270 [ 256.501907] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 256.506594] kthread+0xea/0x120 [ 256.509785] ? __pfx_kthread+0x10/0x10 [ 256.513597] ret_from_fork+0x29/0x50 [ 256.517238] </TASK> In fact, irqs were not disabled and napi managed to be scheduled and run while xsk_pool pointer was still valid, but SW ring of xdp_buff pointers was already freed. To fix this, call ice_qvec_dis_irq() after ice_vsi_stop_tx_ring(). Also while at it, remove redundant ice_clean_rx_ring() call - this is handled in ice_qp_clean_rings(). Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-16igc: fix the validation logic for taprio's gate listAKASHI Takahiro
The check introduced in the commit a5fd39464a40 ("igc: Lift TAPRIO schedule restriction") can detect a false positive error in some corner case. For instance, tc qdisc replace ... taprio num_tc 4 ... sched-entry S 0x01 100000 # slot#1 sched-entry S 0x03 100000 # slot#2 sched-entry S 0x04 100000 # slot#3 sched-entry S 0x08 200000 # slot#4 flags 0x02 # hardware offload Here the queue#0 (the first queue) is on at the slot#1 and #2, and off at the slot#3 and #4. Under the current logic, when the slot#4 is examined, validate_schedule() returns *false* since the enablement count for the queue#0 is two and it is already off at the previous slot (i.e. #3). But this definition is truely correct. Let's fix the logic to enforce a strict validation for consecutively-opened slots. Fixes: a5fd39464a40 ("igc: Lift TAPRIO schedule restriction") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16igbvf: Regard vf reset nack as successAkihiko Odaki
vf reset nack actually represents the reset operation itself is performed but no address is assigned. Therefore, e1000_reset_hw_vf should fill the "perm_addr" with the zero address and return success on such an occasion. This prevents its callers in netdev.c from saying PF still resetting, and instead allows them to correctly report that no address is assigned. Fixes: 6ddbc4cf1f4d ("igb: Indicate failure on vf reset for empty mac address") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16intel/igbvf: free irq on the error path in igbvf_request_msix()Gaosheng Cui
In igbvf_request_msix(), irqs have not been freed on the err path, we need to free it. Fix it. Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16igb: Enable SR-IOV after reinitAkihiko Odaki
Enabling SR-IOV causes the virtual functions to make requests to the PF via the mailbox. Notably, E1000_VF_RESET request will happen during the initialization of the VF. However, unless the reinit is done, the VMMB interrupt, which delivers mailbox interrupt from VF to PF will be kept masked and such requests will be silently ignored. Enable SR-IOV at the very end of the procedure to configure the device for SR-IOV so that the PF is configured properly for SR-IOV when a VF is activated. Fixes: fa44f2f185f7 ("igb: Enable SR-IOV configuration via PCI sysfs interface") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16igb: revert rtnl_lock() that causes deadlockLin Ma
The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds rtnl_lock to eliminate a false data race shown below (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] The above race will never happen and the extra rtnl_lock causes deadlock below [ 141.420169] <TASK> [ 141.420672] __schedule+0x2dd/0x840 [ 141.421427] schedule+0x50/0xc0 [ 141.422041] schedule_preempt_disabled+0x11/0x20 [ 141.422678] __mutex_lock.isra.13+0x431/0x6b0 [ 141.423324] unregister_netdev+0xe/0x20 [ 141.423578] igbvf_remove+0x45/0xe0 [igbvf] [ 141.423791] pci_device_remove+0x36/0xb0 [ 141.423990] device_release_driver_internal+0xc1/0x160 [ 141.424270] pci_stop_bus_device+0x6d/0x90 [ 141.424507] pci_stop_and_remove_bus_device+0xe/0x20 [ 141.424789] pci_iov_remove_virtfn+0xba/0x120 [ 141.425452] sriov_disable+0x2f/0xf0 [ 141.425679] igb_disable_sriov+0x4e/0x100 [igb] [ 141.426353] igb_remove+0xa0/0x130 [igb] [ 141.426599] pci_device_remove+0x36/0xb0 [ 141.426796] device_release_driver_internal+0xc1/0x160 [ 141.427060] driver_detach+0x44/0x90 [ 141.427253] bus_remove_driver+0x55/0xe0 [ 141.427477] pci_unregister_driver+0x2a/0xa0 [ 141.428296] __x64_sys_delete_module+0x141/0x2b0 [ 141.429126] ? mntput_no_expire+0x4a/0x240 [ 141.429363] ? syscall_trace_enter.isra.19+0x126/0x1a0 [ 141.429653] do_syscall_64+0x5b/0x80 [ 141.429847] ? exit_to_user_mode_prepare+0x14d/0x1c0 [ 141.430109] ? syscall_exit_to_user_mode+0x12/0x30 [ 141.430849] ? do_syscall_64+0x67/0x80 [ 141.431083] ? syscall_exit_to_user_mode_prepare+0x183/0x1b0 [ 141.431770] ? syscall_exit_to_user_mode+0x12/0x30 [ 141.432482] ? do_syscall_64+0x67/0x80 [ 141.432714] ? exc_page_fault+0x64/0x140 [ 141.432911] entry_SYSCALL_64_after_hwframe+0x72/0xdc Since the igb_disable_sriov() will call pci_disable_sriov() before releasing any resources, the netdev core will synchronize the cleanup to avoid any races. This patch removes the useless rtnl_(un)lock to guarantee correctness. CC: stable@vger.kernel.org Fixes: 6faee3d4ee8b ("igb: Add lock to avoid data race") Reported-by: Corinna Vinschen <vinschen@redhat.com> Link: https://lore.kernel.org/intel-wired-lan/ZAcJvkEPqWeJHO2r@calimero.vinschen.de/ Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16iavf: do not track VLAN 0 filtersAhmed Zaki
When an interface with the maximum number of VLAN filters is brought up, a spurious error is logged: [257.483082] 8021q: adding VLAN 0 to HW filter on device enp0s3 [257.483094] iavf 0000:00:03.0 enp0s3: Max allowed VLAN filters 8. Remove existing VLANs or disable filtering via Ethtool if supported. The VF driver complains that it cannot add the VLAN 0 filter. On the other hand, the PF driver always adds VLAN 0 filter on VF initialization. The VF does not need to ask the PF for that filter at all. Fix the error by not tracking VLAN 0 filters altogether. With that, the check added by commit 0e710a3ffd0c ("iavf: Fix VF driver counting VLAN 0 filters") in iavf_virtchnl.c is useless and might be confusing if left as it suggests that we track VLAN 0. Fixes: 0e710a3ffd0c ("iavf: Fix VF driver counting VLAN 0 filters") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16iavf: fix non-tunneled IPv6 UDP packet type and hashingAlexander Lobakin
Currently, IAVF's decode_rx_desc_ptype() correctly reports payload type of L4 for IPv4 UDP packets and IPv{4,6} TCP, but only L3 for IPv6 UDP. Originally, i40e, ice and iavf were affected. Commit 73df8c9e3e3d ("i40e: Correct UDP packet header for non_tunnel-ipv6") fixed that in i40e, then commit 638a0c8c8861 ("ice: fix incorrect payload indicator on PTYPE") fixed that for ice. IPv6 UDP is L4 obviously. Fix it and make iavf report correct L4 hash type for such packets, so that the stack won't calculate it on CPU when needs it. Fixes: 206812b5fccb ("i40e/i40evf: i40e implementation for skb_set_hash") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16iavf: fix inverted Rx hash condition leading to disabled hashAlexander Lobakin
Condition, which checks whether the netdev has hashing enabled is inverted. Basically, the tagged commit effectively disabled passing flow hash from descriptor to skb, unless user *disables* it via Ethtool. Commit a876c3ba59a6 ("i40e/i40evf: properly report Rx packet hash") fixed this problem, but only for i40e. Invert the condition now in iavf and unblock passing hash to skbs again. Fixes: 857942fd1aa1 ("i40e: Fix Rx hash reported to the stack by our driver") Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: refactor mailbox overflow detection Jake Keller says: The primary motivation of this series is to cleanup and refactor the mailbox overflow detection logic such that it will work with Scalable IOV. In addition a few other minor cleanups are done while I was working on the code in the area. First, the mailbox overflow functions in ice_vf_mbx.c are refactored to store the data per-VF as an embedded structure in struct ice_vf, rather than stored separately as a fixed-size array which only works with Single Root IOV. This reduces the overall memory footprint when only a handful of VFs are used. The overflow detection functions are also cleaned up to reduce the need for multiple separate calls to determine when to report a VF as potentially malicious. Finally, the ice_is_malicious_vf function is cleaned up and moved into ice_virtchnl.c since it is not Single Root IOV specific, and thus does not belong in ice_sriov.c I could probably have done this in fewer patches, but I split pieces out to hopefully aid in reviewing the overall sequence of changes. This does cause some additional thrash as it results in intermediate versions of the refactor, but I think its worth it for making each step easier to understand. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: call ice_is_malicious_vf() from ice_vc_process_vf_msg() ice: move ice_is_malicious_vf() to ice_virtchnl.c ice: print message if ice_mbx_vf_state_handler returns an error ice: pass mbxdata to ice_is_malicious_vf() ice: remove unnecessary &array[0] and just use array ice: always report VF overflowing mailbox even without PF VSI ice: declare ice_vc_process_vf_msg in ice_virtchnl.h ice: initialize mailbox snapshot earlier in PF init ice: merge ice_mbx_report_malvf with ice_mbx_vf_state_handler ice: remove ice_mbx_deinit_snapshot ice: move VF overflow message count into struct ice_mbx_vf_info ice: track malicious VFs in new ice_mbx_vf_info structure ice: convert ice_mbx_clear_malvf to void and use WARN ice: re-order ice_mbx_reset_snapshot function ==================== Link: https://lore.kernel.org/r/20230313182123.483057-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-15ice: avoid bonding causing auxiliary plug/unplug under RTNL lockDave Ertman
RDMA is not supported in ice on a PF that has been added to a bonded interface. To enforce this, when an interface enters a bond, we unplug the auxiliary device that supports RDMA functionality. This unplug currently happens in the context of handling the netdev bonding event. This event is sent to the ice driver under RTNL context. This is causing a deadlock where the RDMA driver is waiting for the RTNL lock to complete the removal. Defer the unplugging/re-plugging of the auxiliary device to the service task so that it is not performed under the RTNL lock context. Cc: stable@vger.kernel.org # 6.1.x Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/ Fixes: 5cb1ebdbc434 ("ice: Fix race condition during interface enslave") Fixes: 4eace75e0853 ("RDMA/irdma: Report the correct link speed") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== i40e: support XDP multi-buffer Tirthendu Sarkar says: This patchset adds multi-buffer support for XDP. Tx side already has support for multi-buffer. This patchset focuses on Rx side. The last patch contains actual multi-buffer changes while the previous ones are preparatory patches. On receiving the first buffer of a packet, xdp_buff is built and its subsequent buffers are added to it as frags. While 'next_to_clean' keeps pointing to the first descriptor, the newly introduced 'next_to_process' keeps track of every descriptor for the packet. On receiving EOP buffer the XDP program is called and appropriate action is taken (building skb for XDP_PASS, reusing page for XDP_DROP, adjusting page offsets for XDP_{REDIRECT,TX}). The patchset also streamlines page offset adjustments for buffer reuse to make it easier to post process the rx_buffers after running XDP prog. With this patchset there does not seem to be any performance degradation for XDP_PASS and some improvement (~1% for XDP_TX, ~5% for XDP_DROP) when measured using xdp_rxq_info program from samples/bpf/ for 64B packets. v1: https://lore.kernel.org/netdev/20230306210822.3381942-1-anthony.l.nguyen@intel.com/ * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: add support for XDP multi-buffer Rx i40e: add xdp_buff to i40e_ring struct i40e: introduce next_to_process to i40e_ring i40e: use frame_sz instead of recalculating truesize for building skb i40e: Change size to truesize when using i40e_rx_buffer_flip() i40e: add pre-xdp page_count in rx_buffer i40e: change Rx buffer size for legacy-rx to support XDP multi-buffer i40e: consolidate maximum frame size calculation for vsi ==================== Link: https://lore.kernel.org/r/20230309212819.1198218-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13ice: call ice_is_malicious_vf() from ice_vc_process_vf_msg()Jacob Keller
The main loop in __ice_clean_ctrlq first checks if a VF might be malicious before calling ice_vc_process_vf_msg(). This results in duplicate code in both functions to obtain a reference to the VF, and exports the ice_is_malicious_vf() from ice_virtchnl.c unnecessarily. Refactor ice_is_malicious_vf() to be a static function that takes a pointer to the VF. Call this in ice_vc_process_vf_msg() just after we obtain a reference to the VF by calling ice_get_vf_by_id. Pass the mailbox data from the __ice_clean_ctrlq function into ice_vc_process_vf_msg() instead of calling ice_is_malicious_vf(). This reduces the number of exported functions and avoids the need to obtain the VF reference twice for every mailbox message. Note that the state check for ICE_VF_STATE_DIS is kept in ice_is_malicious_vf() and we call this before checking that state in ice_vc_process_vf_msg. This is intentional, as we stop responding to VF messages from a VF once we detect that it may be overflowing the mailbox. This ensures that we continue to silently ignore the message as before without responding via ice_vc_send_msg_to_vf(). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: move ice_is_malicious_vf() to ice_virtchnl.cJacob Keller
The ice_is_malicious_vf() function is currently implemented in ice_sriov.c This function is not Single Root specific, and a future change is going to refactor the ice_vc_process_vf_msg() function to call this instead of calling it before ice_vc_process_vf_msg() in the main loop of __ice_clean_ctrlq. To make that change easier to review, first move this function into ice_virtchnl.c but leave the call in __ice_clean_ctrlq() alone. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: print message if ice_mbx_vf_state_handler returns an errorJacob Keller
If ice_mbx_vf_state_handler() returns an error, the ice_is_malicious_vf() function just exits without printing anything. Instead, use dev_warn_ratelimited to print a warning that we were unable to check the status for this VF. The _ratelimited variant is used to avoid potentially spamming the log if this function is failing consistently for every single mailbox message. Also we can drop the "goto" as it simply skips over a report_malvf check. That variable should always be false if ice_mbx_vf_state_handler returns non-zero. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: pass mbxdata to ice_is_malicious_vf()Jacob Keller
The ice_is_malicious_vf() function takes information about the current state of the mailbox during a single interrupt. This information includes the number of messages processed so far, as well as the number of pending messages not yet processed. A future refactor is going to make ice_vc_process_vf_msg() call ice_is_malicious_vf() instead of having it called separately in ice_main.c This change will require passing all the necessary arguments into ice_vc_process_vf_msg(). To make this simpler, have the main loop fill in the struct ice_mbx_data and pass that rather than passing in the num_msg_proc and num_msg_pending. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: remove unnecessary &array[0] and just use arrayJacob Keller
In ice_is_malicious_vf we print the VF MAC address using %pM by passing the address of the first element of vf->dev_lan_addr. This is equivalent to just passing vf->dev_lan_addr, so do that. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: always report VF overflowing mailbox even without PF VSIJacob Keller
In ice_is_malicious_vf we report a message warning the system administrator when a VF is potentially spamming the PF with asynchronous messages that could overflow the PF mailbox. The specific message was requested by our customer support team to include the VF and PF MAC address. In some cases we may not be able to locate the PF VSI to obtain the MAC address for the PF. The current implementation discards the message entirely in this case. Fix this to instead print a zero address in that case so that we always print something here. Note that dev_warn will also include the PCI device information allowing another mechanism for determining on which PF the potentially malicious VF belongs. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: declare ice_vc_process_vf_msg in ice_virtchnl.hJacob Keller
The ice_vc_process_vf_msg function is the main entry point for handling virtchnl messages. This function is defined in ice_virtchnl.c but its declaration is still in ice_sriov.c The ice_sriov.c file used to contain all of the virtualization logic until commit bf93bf791cec ("ice: introduce ice_virtchnl.c and ice_virtchnl.h") moved the virtchnl logic to its own file. The ice_vc_process_vf_msg function should have had its declaration moved to ice_virtchnl.h then. Fix this. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: initialize mailbox snapshot earlier in PF initJacob Keller
Now that we no longer depend on the number of VFs being allocated, we can move the ice_mbx_init_snapshot function earlier. This will be required by Scalable IOV as we will not be calling ice_sriov_configure for Scalable VFs. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: merge ice_mbx_report_malvf with ice_mbx_vf_state_handlerJacob Keller
The ice_mbx_report_malvf function is used to update the ice_mbx_vf_info.malicious member after we detect a malicious VF. This is done by calling ice_mbx_report_malvf after ice_mbx_vf_state_handler sets its "is_malvf" return parameter true. Instead of requiring two steps, directly update the malicious bit in the state handler, and remove the need for separately calling ice_mbx_report_malvf. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: remove ice_mbx_deinit_snapshotJacob Keller
The ice_mbx_deinit_snapshot function's only remaining job is to clear the previous snapshot data. This snapshot data is initialized when SR-IOV adds VFs, so it is not necessary to clear this data when removing VFs. Since no allocation occurs we no longer need to free anything and we can safely remove this function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: move VF overflow message count into struct ice_mbx_vf_infoJacob Keller
The ice driver has some logic in ice_vf_mbx.c used to detect potentially malicious VF behavior with regards to overflowing the PF mailbox. This logic currently stores message counts in struct ice_mbx_vf_counter.vf_cntr as an array. This array is allocated during initialization with ice_mbx_init_snapshot. This logic makes sense for SR-IOV where all VFs are allocated at once up front. However, in the future with Scalable IOV this logic will not work. VFs can be added and removed dynamically. We could try to keep the vf_cntr array for the maximum possible number of VFs, but this is a waste of memory. Use the recently introduced struct ice_mbx_vf_info structure to store the message count. Pass a pointer to the mbx_info for a VF instead of using its VF ID. Replace the array of VF message counts with a linked list that tracks all currently active mailbox tracking info structures. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: track malicious VFs in new ice_mbx_vf_info structureJacob Keller
Currently the PF tracks malicious VFs in a malvfs bitmap which is used by the ice_mbx_clear_malvf and ice_mbx_report_malvf functions. This bitmap is used to ensure that we only report a VF as malicious once rather than continuously spamming the event log. This mechanism of storage for the malicious indication works well enough for SR-IOV. However, it will not work with Scalable IOV. This is because Scalable IOV VFs can be allocated dynamically and might change VF ID when their underlying VSI changes. To support this, the mailbox overflow logic will need to be refactored. First, introduce a new ice_mbx_vf_info structure which will be used to store data about a VF. Embed this structure in the struct ice_vf, and ensure it gets initialized when a new VF is created. For now this only stores the malicious indicator bit. Pass a pointer to the VF's mbx_info structure instead of using a bitmap to keep track of these bits. A future change will extend this structure and the rest of the logic associated with the overflow detection. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: convert ice_mbx_clear_malvf to void and use WARNJacob Keller
The ice_mbx_clear_malvf function checks for a few error conditions before clearing the appropriate data. These error conditions are really warnings that should never occur in a properly initialized driver. Every caller of ice_mbx_clear_malvf just prints a dev_dbg message on failure which will generally be ignored. Convert this function to void and switch the error return values to WARN_ON. This will make any potentially misconfiguration more visible and makes future refactors that involve changing how we store the malicious VF data easier. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-13ice: re-order ice_mbx_reset_snapshot functionJacob Keller
A future change is going to refactor the VF mailbox overflow detection logic, including modifying ice_mbx_reset_snapshot and its callers. To make this change easier to review, first move the ice_mbx_reset_snapshot function higher in the ice_vf_mbx.c file. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-10i40e: Fix kernel crash during reboot when adapter is in recovery modeIvan Vecera
If the driver detects during probe that firmware is in recovery mode then i40e_init_recovery_mode() is called and the rest of probe function is skipped including pci_set_drvdata(). Subsequent i40e_shutdown() called during shutdown/reboot dereferences NULL pointer as pci_get_drvdata() returns NULL. To fix call pci_set_drvdata() also during entering to recovery mode. Reproducer: 1) Lets have i40e NIC with firmware in recovery mode 2) Run reboot Result: [ 139.084698] i40e: Intel(R) Ethernet Connection XL710 Network Driver [ 139.090959] i40e: Copyright (c) 2013 - 2019 Intel Corporation. [ 139.108438] i40e 0000:02:00.0: Firmware recovery mode detected. Limiting functionality. [ 139.116439] i40e 0000:02:00.0: Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode. [ 139.129499] i40e 0000:02:00.0: fw 8.3.64775 api 1.13 nvm 8.30 0x8000b78d 1.3106.0 [8086:1583] [15d9:084a] [ 139.215932] i40e 0000:02:00.0 enp2s0f0: renamed from eth0 [ 139.223292] i40e 0000:02:00.1: Firmware recovery mode detected. Limiting functionality. [ 139.231292] i40e 0000:02:00.1: Refer to the Intel(R) Ethernet Adapters and Devices User Guide for details on firmware recovery mode. [ 139.244406] i40e 0000:02:00.1: fw 8.3.64775 api 1.13 nvm 8.30 0x8000b78d 1.3106.0 [8086:1583] [15d9:084a] [ 139.329209] i40e 0000:02:00.1 enp2s0f1: renamed from eth0 ... [ 156.311376] BUG: kernel NULL pointer dereference, address: 00000000000006c2 [ 156.318330] #PF: supervisor write access in kernel mode [ 156.323546] #PF: error_code(0x0002) - not-present page [ 156.328679] PGD 0 P4D 0 [ 156.331210] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 156.335567] CPU: 26 PID: 15119 Comm: reboot Tainted: G E 6.2.0+ #1 [ 156.343126] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 156.353369] RIP: 0010:i40e_shutdown+0x15/0x130 [i40e] [ 156.358430] Code: c1 fc ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 55 48 89 fd 53 48 8b 9f 48 01 00 00 <f0> 80 8b c2 06 00 00 04 f0 80 8b c0 06 00 00 08 48 8d bb 08 08 00 [ 156.377168] RSP: 0018:ffffb223c8447d90 EFLAGS: 00010282 [ 156.382384] RAX: ffffffffc073ee70 RBX: 0000000000000000 RCX: 0000000000000001 [ 156.389510] RDX: 0000000080000001 RSI: 0000000000000246 RDI: ffff95db49988000 [ 156.396634] RBP: ffff95db49988000 R08: ffffffffffffffff R09: ffffffff8bd17d40 [ 156.403759] R10: 0000000000000001 R11: ffffffff8a5e3d28 R12: ffff95db49988000 [ 156.410882] R13: ffffffff89a6fe17 R14: ffff95db49988150 R15: 0000000000000000 [ 156.418007] FS: 00007fe7c0cc3980(0000) GS:ffff95ea8ee80000(0000) knlGS:0000000000000000 [ 156.426083] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 156.431819] CR2: 00000000000006c2 CR3: 00000003092fc005 CR4: 0000000000770ee0 [ 156.438944] PKRU: 55555554 [ 156.441647] Call Trace: [ 156.444096] <TASK> [ 156.446199] pci_device_shutdown+0x38/0x60 [ 156.450297] device_shutdown+0x163/0x210 [ 156.454215] kernel_restart+0x12/0x70 [ 156.457872] __do_sys_reboot+0x1ab/0x230 [ 156.461789] ? vfs_writev+0xa6/0x1a0 [ 156.465362] ? __pfx_file_free_rcu+0x10/0x10 [ 156.469635] ? __call_rcu_common.constprop.85+0x109/0x5a0 [ 156.475034] do_syscall_64+0x3e/0x90 [ 156.478611] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 156.483658] RIP: 0033:0x7fe7bff37ab7 Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230309184509.984639-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-09Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-07 (igc) This series contains updates to igc driver only. Muhammad adds tracking and reporting of QBV config errors. Tan Tee adds support for configuring max SDU for each Tx queue. Sasha removes check for alternate media as only one media type is supported. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Clean up and optimize watchdog task igc: offload queue max SDU from tc-taprio igc: Add qbv_config_change_errors counter ==================== Link: https://lore.kernel.org/r/20230307221332.3997881-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Documentation/bpf/bpf_devel_QA.rst b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info") d56b0c461d19 ("bpf, docs: Fix link to netdev-FAQ target") https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-09i40e: add support for XDP multi-buffer RxTirthendu Sarkar
This patch adds multi-buffer support for the i40e_driver. i40e_clean_rx_irq() is modified to collate all the buffers of a packet before calling the XDP program. xdp_buff is built for the first frag of the packet and subsequent frags are added to it. 'next_to_process' is incremented for all non-EOP frags while 'next_to_clean' stays at the first descriptor of the packet. XDP program is called only on receiving EOP frag. New functions are added for adding frags to xdp_buff and for post processing of the buffers once the xdp prog has run. For XDP_PASS this results in a skb with multiple fragments. i40e_build_skb() builds the skb around xdp buffer that already contains frags data. So i40e_add_rx_frag() helper function is now removed. Since fields before 'dataref' in skb_shared_info are cleared during napi_skb_build(), xdp_update_skb_shared_info() is called to set those. For i40e_construct_skb(), all the frags data needs to be copied from xdp_buffer's shared_skb_info to newly constructed skb's shared_skb_info. This also means 'skb' does not need to be preserved across i40e_napi_poll() calls and hence is removed from i40e_ring structure. Previously i40e_alloc_rx_buffers() was called for every 32 cleaned buffers. For multi-buffers this may not be optimal as there may be more cleaned buffers in each i40e_clean_rx_irq() call. So this is now called when at least half of the ring size has been cleaned. Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-09i40e: add xdp_buff to i40e_ring structTirthendu Sarkar
Store xdp_buff on Rx ring struct in preparation for XDP multi-buffer support. This will allow us to combine fragmented frames across separate NAPI cycles in the same way as currently skb fragments are handled. This means that skb pointer on Rx ring will become redundant and will be removed in a later patch. As a consequence i40e_trace() now uses xdp instead of skb pointer. Truesize only needs to be calculated for page sizes bigger than 4k as it is always half-page for 4k pages. With xdp_buff on ring, frame size can now be set during xdp_init_buff() and need not be repopulated in each NAPI call for 4k pages. As a consequence i40e_rx_frame_truesize() is now used only for bigger pages. Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-09i40e: introduce next_to_process to i40e_ringTirthendu Sarkar
Add a new field called next_to_process in the i40e_ring that is advanced for every buffer and change the semantics of next_to_clean to point to the first buffer of a packet. Driver will use next_to_process in the same way next_to_clean was used previously. For the non multi-buffer case, next_to_process and next_to_clean will always be the same since each packet consists of a single buffer. Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-09i40e: use frame_sz instead of recalculating truesize for building skbTirthendu Sarkar
In skb path truesize is calculated while building skb. This is now avoided and xdp->frame_is used instead for both i40e_build_skb() and i40e_construct_skb(). Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 17:56:18 +0000