| Age | Commit message (Collapse) | Author |
|---|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround
for sporadic MDI error on Meteor Lake systems"). The referenced commit
used usleep_range inside the PHY access routines, which are sometimes
called from an atomic context. This can lead to a kernel panic in some
scenarios, such as cable disconnection and reconnection on vPro systems.
Solve this by changing the usleep_range calls back to udelay.
Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems")
Cc: stable@vger.kernel.org
Reported-by: Jérôme Carretero <cJ@zougloub.eu>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740
Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/
Co-developed-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helper i40e_vsi_reconfig_tc(vsi) that configures TC
for given VSI using previously stored TC bitmap.
Effectively replaces open-coded patterns:
enabled_tc = vsi->tc_config.enabled_tc;
vsi->tc_config.enabled_tc = 0;
i40e_vsi_config_tc(vsi, enabled_tc);
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a helper to access main VEB:
i40e_pf_get_main_veb(pf) replaces 'pf->veb[pf->lan_veb]'
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In the driver code there are 3 types of checks whether given
VSI is main or not:
1. vsi->type ==/!= I40E_VSI_MAIN
2. vsi ==/!= pf->vsi[pf->lan_vsi]
3. vsi->seid ==/!= pf->vsi[pf->lan_vsi]->seid
All of them are equivalent and can be consolidated. Convert cases
2 and 3 to case 1.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add simple helper i40e_pf_get_main_vsi(pf) to access main VSI
that replaces pattern 'pf->vsi[pf->lan_vsi]'
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 07d44190a389 ("i40e/i40evf: Detect and recover hung queue
scenario") changes i40e_detect_recover_hung() argument type from
i40e_pf* to i40e_vsi* to be shareable by both i40e and i40evf.
Because the i40evf does not exist anymore and the function is
exclusively used by i40e we can revert this change.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit 0ef2d5afb12d ("i40e: KISS the client interface") simplified
the client interface so in practice it supports only one client
per i40e netdev. But we have still 2 notification functions that
uses as parameter a pointer to VSI of netdevice associated with
the client. After the mentioned commit only possible and used
VSI is the main (LAN) VSI.
So refactor these functions so they are called with PF pointer argument
and the associated VSI (LAN) is taken inside them.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The field is initialized always to zero and it is never read.
Remove it.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This patch adds support to per-packet Tx hardware timestamp request to
AF_XDP zero-copy packet via XDP Tx metadata framework. Please note that
user needs to enable Tx HW timestamp capability via igc_ioctl() with
SIOCSHWTSTAMP cmd before sending xsk Tx hardware timestamp request.
Same as implementation in RX timestamp XDP hints kfunc metadata, Timer 0
(adjustable clock) is used in xsk Tx hardware timestamp. i225/i226 have
four sets of timestamping registers. *skb and *xsk_tx_buffer pointers
are used to indicate whether the timestamping register is already occupied.
Furthermore, a boolean variable named xsk_pending_ts is used to hold the
transmit completion until the tx hardware timestamp is ready. This is
because, for i225/i226, the timestamp notification event comes some time
after the transmit completion event. The driver will retrigger hardware irq
to clean the packet after retrieve the tx hardware timestamp.
Besides, xsk_meta is added into struct igc_tx_timestamp_request as a hook
to the metadata location of the transmit packet. When the Tx timestamp
interrupt is fired, the interrupt handler will copy the value of Tx hwts
into metadata location via xsk_tx_metadata_complete().
This patch is tested with tools/testing/selftests/bpf/xdp_hw_metadata
on Intel ADL-S platform. Below are the test steps and results.
Test Step 1: Run xdp_hw_metadata app
./xdp_hw_metadata <iface> > /dev/shm/result.log
Test Step 2: Enable Tx hardware timestamp
hwstamp_ctl -i <iface> -t 1 -r 1
Test Step 3: Run ptp4l and phc2sys for time synchronization
Test Step 4: Generate UDP packets with 1ms interval for 10s
trafgen --dev <iface> '{eth(da=<addr>), udp(dp=9091)}' -t 1ms -n 10000
Test Step 5: Rerun Step 1-3 with 10s iperf3 as background traffic
Test Step 6: Rerun Step 1-4 with 10s iperf3 as background traffic
Based on iperf3 results below, the impact of holding tx completion to
throughput is not observable.
Result of last UDP packet (no. 10000) in Step 4:
poll: 1 (0) skip=99 fail=0 redir=10000
xsk_ring_cons__peek: 1
0x5640a37972d0: rx_desc[9999]->addr=f2110 addr=f2110 comp_addr=f2110 EoP
rx_hash: 0x2049BE1D with RSS type:0x1
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (14.990 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User RX-time sec:0.0000 (4.271 usec)
No rx_vlan_tci or rx_vlan_proto, err=-95
0x5640a37972d0: ping-pong with csum=ab19 (want 315b) csum_start=34 csum_offset=6
0x5640a37972d0: complete tx idx=9999 addr=f010
HW TX-complete-time: 1679819246793036971 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (77.656 usec)
XDP RX-time: 1679819246792981987 (sec:1679819246.7930) delta to User TX-complete-time sec:0.0001 (132.640 usec)
HW RX-time: 1679819246792971268 (sec:1679819246.7930) delta to HW TX-complete-time sec:0.0001 (65.703 usec)
0x5640a37972d0: complete rx idx=10127 addr=f2110
Result of iperf3 without tx hwts request in step 5:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.05 sec 2.74 GBytes 2.34 Gbits/sec receiver
Result of iperf3 running parallel with trafgen command in step 6:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.74 GBytes 2.36 Gbits/sec 0 sender
[ 5] 0.00-10.04 sec 2.74 GBytes 2.34 Gbits/sec receiver
Co-developed-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240424210256.3440903-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
net: intel: start The Great Code Dedup + Page Pool for iavf
Alexander Lobakin says:
Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and
libie) and switch iavf to Page Pool. Details are in the commit messages;
here's a summary:
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules. Before introducing new changes, which would need to be
copied over again, start decoupling the already existing duplicate
functionality into a new module, which will be shared between several
Intel Ethernet drivers. The first name that came to my mind was
"libie" -- "Intel Ethernet common library". Also this sounds like
"lovelie" (-> one word, no "lib I E" pls) and can be expanded as
"lib Internet Explorer" :P
The "generic", pure-software part is placed separately, so that it can be
easily reused in any driver by any vendor without linking to the Intel
pre-200G guts. In a few words, it's something any modern driver does the
same way, but nobody moved it level up (yet).
The series is only the beginning. From now on, adding every new feature
or doing any good driver refactoring will remove much more lines than add
for quite some time. There's a basic roadmap with some deduplications
planned already, not speaking of that touching every line now asks:
"can I share this?". The final destination is very ambitious: have only
one unified driver for at least i40e, ice, iavf, and idpf with a struct
ops for each generation. That's never gonna happen, right? But you still
can at least try.
PP conversion for iavf lands within the same series as these two are tied
closely. libie will support Page Pool model only, so that a driver can't
use much of the lib until it's converted. iavf is only the example, the
rest will eventually be converted soon on a per-driver basis. That is
when it gets really interesting. Stay tech.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
MAINTAINERS: add entry for libeth and libie
iavf: switch to Page Pool
iavf: pack iavf_ring more efficiently
libeth: add Rx buffer management
page_pool: add DMA-sync-for-CPU inline helper
page_pool: constify some read-only function arguments
slab: introduce kvmalloc_array_node() and kvcalloc_node()
iavf: drop page splitting and recycling
iavf: kill "legacy-rx" for good
net: intel: introduce {, Intel} Ethernet common library
====================
Link: https://lore.kernel.org/r/20240424203559.3420468-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, we allocate a count-sized kernel buffer and copy count bytes
from userspace to that buffer. Later, we use sscanf on this buffer but we
don't ensure that the string is terminated inside the buffer, this can lead
to OOB read when using sscanf. Fix this issue by using memdup_user_nul
instead of memdup_user.
Fixes: 96a9a9341cda ("ice: configure FW logging")
Fixes: 73671c3162c8 ("ice: enable FW logging")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-1-f1f1b53a10f4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over
aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf().
The commit placed this lock acquisition just prior to the acquisition of
the VF configuration lock.
If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK
flag, this could deadlock with ice_vc_cfg_qs_msg() because it always
acquires the locks in the order of the VF configuration lock and then the
LAG mutex.
Lockdep reports this violation almost immediately on creating and then
removing 2 VF:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-rc6 #54 Tainted: G W O
------------------------------------------------------
kworker/60:3/6771 is trying to acquire lock:
ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice]
but task is already holding lock:
ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&pf->lag_mutex){+.+.}-{3:3}:
__lock_acquire+0x4f8/0xb40
lock_acquire+0xd4/0x2d0
__mutex_lock+0x9b/0xbf0
ice_vc_cfg_qs_msg+0x45/0x690 [ice]
ice_vc_process_vf_msg+0x4f5/0x870 [ice]
__ice_clean_ctrlq+0x2b5/0x600 [ice]
ice_service_task+0x2c9/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
kthread+0x104/0x140
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
-> #0 (&vf->cfg_lock){+.+.}-{3:3}:
check_prev_add+0xe2/0xc50
validate_chain+0x558/0x800
__lock_acquire+0x4f8/0xb40
lock_acquire+0xd4/0x2d0
__mutex_lock+0x9b/0xbf0
ice_reset_vf+0x22f/0x4d0 [ice]
ice_process_vflr_event+0x98/0xd0 [ice]
ice_service_task+0x1cc/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
kthread+0x104/0x140
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
*** DEADLOCK ***
4 locks held by kworker/60:3/6771:
#0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0
#1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0
#2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice]
#3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
stack backtrace:
CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54
Hardware name:
Workqueue: ice ice_service_task [ice]
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x80
check_noncircular+0x12d/0x150
check_prev_add+0xe2/0xc50
? save_trace+0x59/0x230
? add_chain_cache+0x109/0x450
validate_chain+0x558/0x800
__lock_acquire+0x4f8/0xb40
? lockdep_hardirqs_on+0x7d/0x100
lock_acquire+0xd4/0x2d0
? ice_reset_vf+0x22f/0x4d0 [ice]
? lock_is_held_type+0xc7/0x120
__mutex_lock+0x9b/0xbf0
? ice_reset_vf+0x22f/0x4d0 [ice]
? ice_reset_vf+0x22f/0x4d0 [ice]
? rcu_is_watching+0x11/0x50
? ice_reset_vf+0x22f/0x4d0 [ice]
ice_reset_vf+0x22f/0x4d0 [ice]
? process_one_work+0x176/0x4d0
ice_process_vflr_event+0x98/0xd0 [ice]
ice_service_task+0x1cc/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x104/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
To avoid deadlock, we must acquire the LAG mutex only after acquiring the
VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only
after we either acquire or check that the VF configuration lock is held.
Fixes: 9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240423182723.740401-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Same number of TCs doesn't imply that underlying TC configs are
same. The config could be different due to difference in number
of queues in each TC. Add utility function to determine if TC
configs are same.
Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Mineri Bhange <minerix.bhange@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240423182723.740401-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the MFS is set below the default (0x2600), a warning message is
reported like the following :
MFS for port 1 has been set below the default: 600
This message is a bit confusing as the number shown here (600) is in
fact an hexa number: 0x600 = 1536
Without any explicit "0x" prefix, this message is read like the MFS is
set to 600 bytes.
MFS, as per MTUs, are usually expressed in decimal base.
This commit reports both current and default MFS values in decimal
so it's less confusing for end-users.
A typical warning message looks like the following :
MFS for port 1 (1536) has been set below the default (9728)
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set")
Link: https://lore.kernel.org/r/20240423182723.740401-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Issue reported by customer during SRIOV testing, call trace:
When both i40e and the i40iw driver are loaded, a warning
in check_flush_dependency is being triggered. This seems
to be because of the i40e driver workqueue is allocated with
the WQ_MEM_RECLAIM flag, and the i40iw one is not.
Similar error was encountered on ice too and it was fixed by
removing the flag. Do the same for i40e too.
[Feb 9 09:08] ------------[ cut here ]------------
[ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is
flushing !WQ_MEM_RECLAIM infiniband:0x0
[ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966
check_flush_dependency+0x10b/0x120
[ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq
snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4
nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr
rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma
intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif
isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal
intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core
iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore
ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich
intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad
xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe
drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel
libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror
dm_region_hash dm_log dm_mod fuse
[ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not
tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1
[ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS
SE5C620.86B.02.01.0013.121520200651 12/15/2020
[ +0.000001] Workqueue: i40e i40e_service_task [i40e]
[ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120
[ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48
81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd
ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90
[ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282
[ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX:
0000000000000027
[ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI:
ffff94d47f620bc0
[ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09:
00000000ffff7fff
[ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12:
ffff94c5451ea180
[ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15:
ffff94c5f1330ab0
[ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000)
knlGS:0000000000000000
[ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4:
00000000007706f0
[ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ +0.000001] PKRU: 55555554
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000002] ? __warn+0x80/0x130
[ +0.000003] ? check_flush_dependency+0x10b/0x120
[ +0.000002] ? report_bug+0x195/0x1a0
[ +0.000005] ? handle_bug+0x3c/0x70
[ +0.000003] ? exc_invalid_op+0x14/0x70
[ +0.000002] ? asm_exc_invalid_op+0x16/0x20
[ +0.000006] ? check_flush_dependency+0x10b/0x120
[ +0.000002] ? check_flush_dependency+0x10b/0x120
[ +0.000002] __flush_workqueue+0x126/0x3f0
[ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core]
[ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core]
[ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core]
[ +0.000020] i40iw_close+0x4b/0x90 [irdma]
[ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e]
[ +0.000035] i40e_service_task+0x126/0x190 [i40e]
[ +0.000024] process_one_work+0x174/0x340
[ +0.000003] worker_thread+0x27e/0x390
[ +0.000001] ? __pfx_worker_thread+0x10/0x10
[ +0.000002] kthread+0xdf/0x110
[ +0.000002] ? __pfx_kthread+0x10/0x10
[ +0.000002] ret_from_fork+0x2d/0x50
[ +0.000003] ? __pfx_kthread+0x10/0x10
[ +0.000001] ret_from_fork_asm+0x1b/0x30
[ +0.000004] </TASK>
[ +0.000001] ---[ end trace 0000000000000000 ]---
Fixes: 4d5957cbdecd ("i40e: remove WQ_UNBOUND and the task limit of our workqueue")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Robert Ganzynkowicz <robert.ganzynkowicz@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240423182723.740401-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Roman reports a deadlock on unplug of a Thunderbolt docking station
containing an Intel I225 Ethernet adapter.
The root cause is that led_classdev's for LEDs on the adapter are
registered such that they're device-managed by the netdev. That
results in recursive acquisition of the rtnl_lock() mutex on unplug:
When the driver calls unregister_netdev(), it acquires rtnl_lock(),
then frees the device-managed resources. Upon unregistering the LEDs,
netdev_trig_deactivate() invokes unregister_netdevice_notifier(),
which tries to acquire rtnl_lock() again.
Avoid by using non-device-managed LED registration.
Stack trace for posterity:
schedule+0x6e/0xf0
schedule_preempt_disabled+0x15/0x20
__mutex_lock+0x2a0/0x750
unregister_netdevice_notifier+0x40/0x150
netdev_trig_deactivate+0x1f/0x60 [ledtrig_netdev]
led_trigger_set+0x102/0x330
led_classdev_unregister+0x4b/0x110
release_nodes+0x3d/0xb0
devres_release_all+0x8b/0xc0
device_del+0x34f/0x3c0
unregister_netdevice_many_notify+0x80b/0xaf0
unregister_netdev+0x7c/0xd0
igc_remove+0xd8/0x1e0 [igc]
pci_device_remove+0x3f/0xb0
Fixes: ea578703b03d ("igc: Add support for LEDs on i225/i226")
Reported-by: Roman Lozko <lozko.roma@gmail.com>
Closes: https://lore.kernel.org/r/CAEhC_B=ksywxCG_+aQqXUrGEgKq+4mqnSV8EBHOKbC3-Obj9+Q@mail.gmail.com/
Reported-by: "Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com>
Closes: https://lore.kernel.org/r/ZhRD3cOtz5i-61PB@mail-itl/
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel i225
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240422204503.225448-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the IAVF driver simply uses dev_alloc_page() + free_page() with
no custom recycling logics, it can easily be switched to using Page
Pool / libeth API instead.
This allows to removing the whole dancing around headroom, HW buffer
size, and page order. All DMA-for-device is now done in the PP core,
for-CPU -- in the libeth helper.
Use skb_mark_for_recycle() to bring back the recycling and restore the
performance. Speaking of performance: on par with the baseline and
faster with the PP optimization series applied. But the memory usage for
1500b MTU is now almost 2x lower (x86_64) thanks to allocating a page
every second descriptor.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Before replacing the Rx buffer management with libie, clean up
&iavf_ring a bit.
There are several fields not used anywhere in the code -- simply remove
them. Move ::tail up to remove a hole. Replace ::arm_wb boolean with
1-bit flag in ::flags to free 1 more byte. Finally, move ::prev_pkt_ctr
out of &iavf_tx_queue_stats -- it doesn't belong there (used for Tx
stall detection). Place it next to the stats on the ring itself to fill
the 4-byte slot.
The result: no holes and all the hot fields fit into the first 64-byte
cacheline.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a couple intuitive helpers to hide Rx buffer implementation details
in the library and not multiplicate it between drivers. The settings are
sorta optimized for 100G+ NICs, but nothing really HW-specific here.
Use the new page_pool_dev_alloc() to dynamically switch between
split-page and full-page modes depending on MTU, page size, required
headroom etc. For example, on x86_64 with the default driver settings
each page is shared between 2 buffers. Turning on XDP (not in this
series) -> increasing headroom requirement pushes truesize out of 2048
boundary, leading to that each buffer starts getting a full page.
The "ceiling" limit is %PAGE_SIZE, as only order-0 pages are used to
avoid compound overhead. For the above architecture, this means maximum
linear frame size of 3712 w/o XDP.
Not that &libeth_buf_queue is not a complete queue/ring structure for
now, rather a shim, but eventually the libeth-enabled drivers will move
to it, with iavf being the first one.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
As an intermediate step, remove all page splitting/recycling code. Just
always allocate a new page and don't touch its refcount, so that it gets
freed by the core stack later.
Same for the "in-place" recycling, i.e. when an unused buffer gets
assigned to a first needs-refilling descriptor. In some cases, this
was leading to moving up to 63 &iavf_rx_buf structures around the ring
on a per-field basis -- not something wanted on hotpath.
The change allows to greatly simplify certain parts of the code:
Function: add/remove: 0/2 grow/shrink: 0/7 up/down: 0/-744 (-744)
Although the array of &iavf_rx_buf is barely used now and could be
replaced with just page pointer array, don't touch it now to not
complicate replacing it with libie Rx buffer struct later on.
No surprise perf loses up to 30% here, but that regression will
go away once PP lands.
Note that iavf_rx_pg_*() definitions are left to reduce diffstat.
They will be removed with the conversion to Page Pool.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Ever since build_skb() became stable, the old way with allocating an skb
for storing the headers separately, which will be then copied manually,
was slower, less flexible, and thus obsolete.
* It had higher pressure on MM since it actually allocates new pages,
which then get split and refcount-biased (NAPI page cache);
* It implies memcpy() of packet headers (40+ bytes per each frame);
* the actual header length was calculated via eth_get_headlen(), which
invokes Flow Dissector and thus wastes a bunch of CPU cycles;
* XDP makes it even more weird since it requires headroom for long and
also tailroom for some time (since mbuf landed). Take a look at the
ice driver, which is built around work-arounds to make XDP work with
it.
Even on some quite low-end hardware (not a common case for 100G NICs) it
was performing worse.
The only advantage "legacy-rx" had is that it didn't require any
reserved headroom and tailroom. But iavf didn't use this, as it always
splits pages into two halves of 2k, while that save would only be useful
when striding. And again, XDP effectively removes that sole pro.
There's a train of features to land in IAVF soon: Page Pool, XDP, XSk,
multi-buffer etc. Each new would require adding more and more Danse
Macabre for absolutely no reason, besides making hotpath less and less
effective.
Remove the "feature" with all the related code. This includes at least
one very hot branch (typically hit on each new frame), which was either
always-true or always-false at least for a complete NAPI bulk of 64
frames, the whole private flags cruft, and so on. Some stats:
Function: add/remove: 0/4 grow/shrink: 0/7 up/down: 0/-721 (-721)
RO Data: add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-40 (-40)
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules.
Before introducing new changes, which would need to be copied over again,
start decoupling the already existing duplicate functionality into a new
module, which will be shared between several Intel Ethernet drivers.
Add the lookup table which converts 8/10-bit hardware packet type into
a parsed bitfield structure for easy checking packet format parameters,
such as payload level, IP version, etc. This is currently used by i40e,
ice and iavf and it's all the same in all three drivers.
The only difference introduced in this implementation is that instead of
defining a 256 (or 1024 in case of ice) element array, add unlikely()
condition to limit the input to 154 (current maximum non-reserved packet
type). There's no reason to waste 600 (or even 3600) bytes only to not
hurt very unlikely exception packets.
The hash computation function now takes payload level directly as a
pkt_hash_type. There's a couple cases when non-IP ptypes are marked as
L3 payload and in the previous versions their hash level would be 2, not
3. But skb_set_hash() only sees difference between L4 and non-L4, thus
this won't change anything at all.
The module is behind the hidden Kconfig symbol, which the drivers will
select when needed. The exports are behind 'LIBIE' namespace to limit
the scope of the functions.
Not that non-HW-specific symbols will live in yet another module,
libeth. This is done to easily distinguish pretty generic code ready
for reusing by any other vendor and/or for moving the layer up from
the code useful in Intel's 1-100G drivers only.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It was observed that Tx performance was inconsistent across all queues
and/or VSIs and that it was directly connected to existing 9-layer
topology of the Tx scheduler.
Introduce new private devlink param - tx_scheduling_layers. This parameter
gives user flexibility to choose the 5-layer transmit scheduler topology
which helps to smooth out the transmit performance.
Allowed parameter values are 5 and 9.
Example usage:
Show:
devlink dev param show pci/0000:4b:00.0 name tx_scheduling_layers
pci/0000:4b:00.0:
name tx_scheduling_layers type driver-specific
values:
cmode permanent value 9
Set:
devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 5
cmode permanent
devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 9
cmode permanent
Signed-off-by: Lukasz Czapnik <lukasz.czapnik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce support for Tx scheduler topology change, based on user
selection, from default 9-layer to 5-layer.
Change requires NVM (version 3.20 or newer) and DDP package (OS Package
1.3.30 or newer - available for over a year in linux-firmware, since
commit aed71f296637 in linux-firmware ("ice: Update package to 1.3.30.0"))
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=aed71f296637
Enable 5-layer topology switch in init path of the driver. To accomplish
that upload of the DDP package needs to be delayed, until change in Tx
topology is finished. To trigger the Tx change user selection should be
changed in NVM using devlink. Then the platform should be rebooted.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Adjust the VSI/Aggregator layers based on the number of logical layers
supported by the FW. Currently the VSI and Aggregator layers are
fixed based on the 9 layer scheduler tree layout. Due to performance
reasons the number of layers of the scheduler tree is changing from
9 to 5. It requires a readjustment of these VSI/Aggregator layer values.
Signed-off-by: Raj Victor <victor.raj@intel.com>
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There is a performance issue when the number of VSIs are not multiple
of 8. This is caused due to the max children limitation per node(8) in
9 layer topology. The BW credits are shared evenly among the children
by default. Assume one node has 8 children and the other has 1.
The parent of these nodes share the BW credit equally among them.
Apparently this causes a problem for the first node which has 8 children.
The 9th VM get more BW credits than the first 8 VMs.
Example:
1) With 8 VM's:
for x in 0 1 2 3 4 5 6 7;
do taskset -c ${x} netperf -P0 -H 172.68.169.125 & sleep .1 ; done
tx_queue_0_packets: 23283027
tx_queue_1_packets: 23292289
tx_queue_2_packets: 23276136
tx_queue_3_packets: 23279828
tx_queue_4_packets: 23279828
tx_queue_5_packets: 23279333
tx_queue_6_packets: 23277745
tx_queue_7_packets: 23279950
tx_queue_8_packets: 0
2) With 9 VM's:
for x in 0 1 2 3 4 5 6 7 8;
do taskset -c ${x} netperf -P0 -H 172.68.169.125 & sleep .1 ; done
tx_queue_0_packets: 24163396
tx_queue_1_packets: 24164623
tx_queue_2_packets: 24163188
tx_queue_3_packets: 24163701
tx_queue_4_packets: 24163683
tx_queue_5_packets: 24164668
tx_queue_6_packets: 23327200
tx_queue_7_packets: 24163853
tx_queue_8_packets: 91101417
So on average queue 8 statistics show that 3.7 times more packets were
send there than to the other queues.
The FW starting with version 3.20, has increased the max number of
children per node by reducing the number of layers from 9 to 5. Reflect
this on driver side.
Signed-off-by: Raj Victor <victor.raj@intel.com>
Co-developed-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-17 (ice)
This series contains updates to ice driver only.
Marcin adds Tx malicious driver detection (MDD) events to be included as
part of mdd-auto-reset-vf.
Dariusz removes unnecessary implementation of ndo_get_phys_port_name.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Remove ndo_get_phys_port_name
ice: Add automatic VF reset on Tx MDD events
====================
Link: https://lore.kernel.org/r/20240417165634.2081793-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/trace/events/rpcgss.h
386f4a737964 ("trace: events: cleanup deprecated strncpy uses")
a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field")
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_tc_lib.c
2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device")
784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ndo_get_phys_port_name is never actually used, as in switchdev
devlink is always being created.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Dariusz Aftanski <dariusz.aftanski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In cases when VF sends malformed packets that are classified as malicious,
it can cause Tx queue to freeze as a result of Malicious Driver Detection
event. Such malformed packets can appear as a result of a faulty userspace
app running on VF. This frozen queue can be stuck for several minutes being
unusable.
User might prefer to immediately bring the VF back to operational state
after such event, which can be done by automatically resetting the VF which
caused MDD. This is already implemented for Rx events (mdd-auto-reset-vf
flag private flag needs to be set).
Extend the VF auto reset to also cover Tx MDD events. When any MDD event
occurs on VF (Tx or Rx) and the mdd-auto-reset-vf private flag is set,
perform a graceful VF reset to quickly bring it back to operational state.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Liang-Min Wang <liang-min.wang@intel.com>
Signed-off-by: Liang-Min Wang <liang-min.wang@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.
Example:
devlink dev eswitch set $PF1_PCI mode switchdev
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
tc qdisc add dev $VF1_PR ingress
ethtool -K $PF1 hw-tc-offload on
tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop
Fixes: 9e300987d4a8 ("ice: VXLAN and Geneve TC support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.
It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.
Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In case of traffic going from the VF (so ingress for port representor)
source VSI should be consider during packet classification. It is
needed for hardware to not match packets from different ports with
filters added on other port.
It is only for "from VF" traffic, because other traffic direction
doesn't have source VSI.
Set correct ::src_vsi in rule_info to pass it to the hardware filter.
For example this rule should drop only ipv4 packets from eth10, not from
the others VF PRs. It is needed to check source VSI in this case.
$tc filter add dev eth10 ingress protocol ip flower skip_sw action drop
Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF")
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice physical function driver needs to configure the association of
queues and interrupts on behalf of its virtual functions. This is done over
virtchnl by the VF sending messages during its initialization phase. These
messages contain a vector_id which the VF wants to associate with a given
queue. This ID is relative to the VF space, where 0 indicates the control
IRQ for non-queue interrupts.
When programming the mapping, the PF driver currently passes this vector_id
directly to the low level functions for programming. This works for SR-IOV,
because the hardware uses the VF-based indexing for interrupts.
This won't work for Scalable IOV, which uses PF-based indexing for
programming its VSIs. To handle this, the driver needs to be able to look
up the proper index to use for programming. For typical IRQs, this would be
the q_vector->reg_idx field.
The q_vector->reg_idx can't be set to a VF relative value, because it is
used when the PF needs to control the interrupt, such as when triggering a
software interrupt on stopping the Tx queue. Thus, introduce a new
q_vector->vf_reg_idx which can store the VF relative index for registers
which expect this.
Use this in ice_cfg_interrupt to look up the VF index from the q_vector.
This allows removing the vector ID parameter of ice_cfg_interrupt. Also
notice that this function returns an int, but then is cast to the virtchnl
error enumeration, virtchnl_status_code. Update the return type to indicate
it does not return an integer error code. We can't use normal error codes
here because the return values are passed across the virtchnl interface.
This will allow the future Scalable IOV VFs to correctly look up the index
needed for programming the VF queues without breaking SR-IOV.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit fe1c5ca2fe76 ("ice: implement num_msix field per VF") updated the
driver to allow for per-VF MSI-X configuration. The initial defaults were
set in ice_create_vf_entries(). This logic is better placed in
ice_initialize_vf_entry(). Indeed, that function already sets
vf->num_vf_qs, as well as initializes the allow list via calling
ice_vc_set_default_allowlist().
Move this logic into ice_initialize_vf_entry(). This makes the code clear,
and ensures that these VF fields will be initialized properly for both
SR-IOV VFs and the upcoming Scalable IOV VFs.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for 'flow-type ether' Flow Director rules via ethtool.
Create packet segment info for filter configuration based on ethtool
command parameters. Reuse infrastructure already created for
ipv4 and ipv6 flows to convert packet segment into
extraction sequence, which is later used to program the filter
inside Flow Director block of the Rx pipeline.
Rules not containing masks are processed by the Flow Director,
and support the following set of input parameters in all combinations:
src, dst, proto, vlan-etype, vlan, action.
It is possible to specify address mask in ethtool parameters but only
00:00:00:00:00 and FF:FF:FF:FF:FF are valid.
The same applies to proto, vlan-etype and vlan masks:
only 0x0000 and 0xffff masks are valid.
Testing:
(DUT) iperf3 -s
(DUT) ethtool -U ens785f0np0 flow-type ether dst <ens785f0np0 mac> \
action 10
(DUT) watch 'ethtool -S ens785f0np0 | grep rx_queue'
(LP) iperf3 -c ${DUT_IP}
Counters increase only for:
'rx_queue_10_packets'
'rx_queue_10_bytes'
Signed-off-by: Jakub Buchocki <jakubx.buchocki@intel.com>
Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Passing v6 argument is unnecessary as flow_type is still
analyzed inside the function.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
8c5ad0dae93c ("igc: Add ethtool support") added ethtool_ops.begin() and
.complete(), which used pm_runtime_get_sync() to resume suspended devices
before any ethtool_ops callback and allow suspend after it completed.
Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before any ethtool_ops callback even if the driver
didn't supply a .begin() callback.
Remove the .begin() and .complete() callbacks, which are now redundant
because dev_ethtool() already resumes the device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
749ab2cd1270 ("igb: add basic runtime PM support") added
ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
resume suspended devices before any ethtool_ops callback and allow suspend
after it completed.
Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before any ethtool_ops callback even if the driver
didn't supply a .begin() callback.
Remove the .begin() and .complete() callbacks, which are now redundant
because dev_ethtool() already resumes the device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
e60b22c5b7e5 ("e1000e: fix accessing to suspended device") added
ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
resume suspended devices before any ethtool_ops callback and allow suspend
after it completed.
3ef672ab1862 ("e1000e: ethtool unnecessarily takes device out of RPM
suspend") removed ethtool_ops.begin() and .complete() and instead did
pm_runtime_get_sync() only in the individual ethtool_ops callbacks that
access device registers.
Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before *any* ethtool_ops callback, as it was
before 3ef672ab1862.
Remove most runtime resumes from ethtool_ops, which are now redundant
because the resume has already been done by dev_ethtool(). This is
essentially a revert of 3ef672ab1862 ("e1000e: ethtool unnecessarily takes
device out of RPM suspend").
There are a couple subtleties:
- Prior to 3ef672ab1862, the device was resumed only for the duration of
a single ethtool callback. 3ef672ab1862 changed e1000_set_phys_id() so
the device was resumed for ETHTOOL_ID_ACTIVE and remained resumed until
a subsequent callback for ETHTOOL_ID_INACTIVE. Preserve that part of
3ef672ab1862 so the device will not be runtime suspended while in the
ETHTOOL_ID_ACTIVE state.
- 3ef672ab1862 added "if (!pm_runtime_suspended())" in before reading the
STATUS register in e1000_get_settings(). This was racy and is now
unnecessary because dev_ethtool() has resumed the device already, so
revert that.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for
those drivers requiring them. For the DEFXX driver the use of I/O
ports is optional and we only need to fence specific code paths. It also
turns out that with HAS_IOPORT handled explicitly HAMRADIO does not need
the !S390 dependency and successfully builds the bpqether driver.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/ip_gre.c
17af420545a7 ("erspan: make sure erspan_base_hdr is present in skb->head")
5832c4a77d69 ("ip_tunnel: convert __be16 tunnel flags to bitmaps")
https://lore.kernel.org/all/20240402103253.3b54a1cf@canb.auug.org.au/
Adjacent changes:
net/ipv6/ip6_fib.c
d21d40605bca ("ipv6: Fix infinite recursion in fib6_dump_done().")
5fc68320c1fb ("ipv6: remove RTNL protection from inet6_dump_fib()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the very rare case where a packet type is unknown to the driver,
idpf_rx_process_skb_fields would return early without calling
eth_type_trans to set the skb protocol / the network layer handler.
This is especially problematic if tcpdump is running when such a
packet is received, i.e. it would cause a kernel panic.
Instead, call eth_type_trans for every single packet, even when
the packet type is unknown.
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Reported-by: Balazs Nemeth <bnemeth@redhat.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Salvatore Daniele <sdaniele@redhat.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ice_port_vlan_on/off() was introduced in commit 2946204b3fa8 ("ice:
implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns
ena_rx_filtering to inner_vlan_ops in DVM mode.
This causes an error when rx_filtering cannot be enabled in legacy mode.
Reproducer:
echo 1 > /sys/class/net/$PF/device/sriov_numvfs
ip link set $PF vf 0 spoofchk off trust on vlan 3
dmesg:
ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95
Fixes: 2946204b3fa8 ("ice: implement bridge port vlan")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Automatically cleaned up pointers need to be initialized before exiting
their scope. In this case, they need to be initialized to NULL before
any return statement.
Fixes: 90f821d72e11 ("ice: avoid unnecessary devm_ usage")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-01 (ice)
This series contains updates to ice driver only.
Michal Schmidt changes flow for gettimex64 to use host-side spinlock
rather than hardware semaphore for lighter-weight locking.
Steven adds ability for switch recipes to be re-used when firmware
supports it.
Thorsten Blum removes unwanted newlines in netlink messaging.
Michal Swiatkowski and Piotr re-organize devlink related code; renaming,
moving, and consolidating it to a single location. Michal also
simplifies the devlink init and cleanup path to occur under a single
lock call.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: hold devlink lock for whole init/cleanup
ice: move devlink port code to a separate file
ice: move ice_devlink.[ch] to devlink folder
ice: Remove newlines in NL_SET_ERR_MSG_MOD
ice: Add switch recipe reusing feature
ice: fold ice_ptp_read_time into ice_ptp_gettimex64
ice: avoid the PTP hardware semaphore in gettimex64 path
ice: add ice_adapter for shared data across PFs on the same NIC
====================
Link: https://lore.kernel.org/r/20240401172421.1401696-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-29 (net: intel)
This series contains updates to most Intel drivers.
Jesse moves declaration of pci_driver struct to remove need for forward
declarations in igb and converts Intel drivers to user newer power
management ops.
Sasha reworks power management flow on igc to avoid using rtnl_lock()
during those flows.
Maciej reorganizes i40e_nvm file to avoid forward declarations.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: avoid forward declarations in i40e_nvm.c
igc: Refactor runtime power management flow
net: intel: implement modern PM ops declarations
igb: simplify pci ops declaration
====================
Link: https://lore.kernel.org/r/20240329175632.211340-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
