summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)Author
2014-05-26ixgbe: extract PTP clock device from ptp_initJacob Keller
In order to properly handle a suspend/resume cycle, we cannot destroy the PTP clock device. As part of this, we should only re-create the device on first initialization. After a resume, when ixgbe_ptp_init is called, we won't create a new clock, and we will use the old clock device. To that end, this patch extracts the clock creation out of ptp_init, and only calls it if we don't already have a ptp_clock pointer. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: allow ixgbe_ptp_reset to maintain current hwtstamp configJacob Keller
Rather than clearing the hwtstamp configuration, we should use the known configuration requested by the user and call the function which has now been separated from the ioctl. This means that after a reset, the timestamp mode will be maintained rather than lost. We still can't maintain the clock value, however. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: extract the hardware setup from the ixgbe_ptp_set_ts_configJacob Keller
Currently all of the hardware setup logic for the PTP hardware bits is buried inside of the ioctl which sets the timestamp configuration. This makes it hard to use this logic in other places (primarily reset), and this means we can't restore current timestamp mode upon a MAC reset. Extracting this logic into a separate function will enable future work for the ixgbe_ptp_reset function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: rename ixgbe_ptp_enable to ixgbe_ptp_feature_enableJacob Keller
Since the name ixgbe_ptp_enable could be misconstrued as a function which enables the whole PTP core, rename this function so that it is clear the function is for enabling of the extra features such as PPS signal. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-26ixgbe: fix linking at 100Mbps on copper devices with MNG FW enabledEmil Tantilov
Driver was calling setup_link to make sure that fiber interfaces with MNG FW enabled will get link on probe because the laser was most likely turned off. This prevented non-fiber devices with MNG FW from linking at 100Mbps. This patch adds a check to only call setup_link for fiber devices. Reported-and-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to igb, igbvf, ixgbe, i40e and i40evf. Jacob provides eight patches to cleanup the ixgbe driver to resolve various checkpatch.pl warnings/errors as well as minor coding style issues. Stephen Hemminger and I provide simple cleanups of void functions which had useless return statements at the end of the function which are not needed. v2: Dropped Emil's patch "ixgbe: fix the detection of SFP+ capable interfaces" while I wait for his updated patch to be validated. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate ↵Sucheta Chakraborty
through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-23i40e,igb,ixgbe: remove usless return statementsStephen Hemminger
Remove cases where useless bare return is left at end of function. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23igb/ixgbe: remove return statements for void functionsJeff Kirsher
Remove useless return statements for void functions which do not need it. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2014-05-23ixgbe: add /* fallthrough */ comment to case statementsJacob Keller
This semicomplex switch-case has various fallthrough portions, that were not indicated by a /* fallthrough */ comment. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: add space between operands to &Jacob Keller
This patch cleans up a checkpatch.pl style warning in the ixgbe code. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: don't check NULL for debugfs_remove_recursiveJacob Keller
The debugfs_remove_recursive function is NULL-safe, so we don't need to check here ourselves. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: add braces around else blockJacob Keller
This commit fixes a checkpatch.pl warning for style, by adding braces around the else block, since the if block requires braces. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: fix several concatenated strings to single lineJacob Keller
This patch fixes various log strings that are split over multiple lines in the ixgbe driver. This cleans up checkpatch.pl warnings, and makes it easier to search the code for warning strings displayed to the kernel log. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: fix checkpatch style of blank line after declarationJacob Keller
This patch fixes checkpatch warnings in ixgbe, by adding a blank line between declaration and code blocks. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: fix function-like macro, remove semicolonJacob Keller
This patch removes the semicolon from the end of the do-while(0) construct in two function-like macros. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACEJacob Keller
The contents of this patch were originally generated by "scripts/checkpatch.pl --fix-inplace --types CODE_INDENT,LEADING_SPACE drivers/net/ethernet/ixgbe/*.[ch]", and then hand verified for consistency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: fix passing wrong error code to i40e_open()Jean Sacren
The commit 6c167f582ea9 ("i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()") introduced a new function i40e_vsi_open() with the regression by a typo. Due to the commit, the wrong error code would be passed to i40e_open(). Fix this error in i40e_vsi_open() by turning the macro into a negative value so that i40e_open() could return the pertinent error code correctly. Fixes: 6c167f582ea9 ("i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()") Signed-off-by: Jean Sacren <sakiwit@gmail.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: Check PCI_IOV config to avoid compile errorGreg Rose
The call to i40e_alloc_vfs needs to be wrapped in CONFIG_PCI_IOV because the function itself is wrapped in the same conditional compile block. Change-ID: I663c5f1b85e5cfba0b36da8966f7db1a034f408b Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: remove Tx work for ptpJesse Brandeburg
The previous removal of the PTP Tx work functionality was incomplete as noted by Jake Keller. This removal allows us to rely on the Tx timesync interrupt. CC: Jacob Keller <jacob.e.keller@intel.com> Change-ID: Id4faaf275a3688053ebbf07bef08072f9fd11aa9 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: Don't disable SR-IOV when VFs are assignedMitch Williams
When VFs are assigned to active VMs and we disable SR-IOV out from under them, bad things happen. Currently, the VM does not crash, but the VFs lose all resources and have no way to get them back. Add an additional check for when the user is disabling through sysfs, and add a comment to clarify why we check twice. Change-ID: Icad78eef516e4e1e4a87874d59132bc3baa058d4 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: remove hardcode of stats struct size in ethtoolShannon Nelson
Base the queue stats length on the queue stats struct rather than assuming it is 2 fields. This is in prep for adding data fields which are configuration dependent. Change-ID: I937f471f389d2e0f8cec733960c5d9a06b14f3ec Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e/i40evf: control auto ITR through ethtoolMitch Williams
For all of our supported kernels, ethtool allows us to directly control adaptive ITR instead of just faking it with an ITR value. Support this capability so that user knows explicitly when ITR is being controlled dynamically. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: Iae6b79c5db767a63d22ecd9a9c24acaff02a096e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e/i40evf: set proper default for ITR registersMitch Williams
Ethtool consistently reports 0 values for our ITR settings because we never actually set them. Fix this by setting the default values to the specified default values. Change-ID: I2832406a66f7140f2b1230945d6ff6cbf77467c8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: make ethtool_ops constMitch Williams
Const-ify the ethtool_ops structure, as it is extremely unlikely to change at runtime. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: I1ccb1b7c3ea801cc934447599a35910e7c93d321 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: don't lie to ethtoolMitch Williams
Don't tell ethtool that the VF can do 10GbaseT, when it really has no idea what its link speed is. Set the supported values to 0 instead. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: Iceb0d8af68fe5d8dc13224366979ba701ba89c39 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Use macro param for ethtool statsMitch Williams
Use a macro parameter for ethtool stats instead of just assuming that a valid netdev variable exists. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: I66681698573c1549f95fdea310149d8a7e96a60f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: add required includeMitch Williams
On some architectures, this header must be explicitly included. Change-ID: I4bc2eb0531956a7b676489f79d347d55cfe12421 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Fix the headers and update copyright year.Jesse Brandeburg
Adding the appropriate GNU General Public License header and update copyright year to 2014. Change-ID: I769dd2d37d70350afd0c8727ae2859c0fd340361 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Remove unused definesCatherine Sullivan
Remove the defines for PCI bus info that are never used. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40evf: Update AdminQ interfaceShannon Nelson
Minor changes to the AdminQ interface to bring it up-to-date. Change-ID: Ie31a4cc4911b2d9d3b7f9af2e56fb0ae674f6345 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-05e1000e: Restrict MDIO Slow Mode workaround to relevant partsDavid Ertman
It has been determined that the workaround of putting the PHY into MDIO slow mode to access the PHY id is not necessary with Lynx Point and newer parts. The issue that necessitated the workaround has been fixed on the newer hardware. We will maintains, as a last ditch attempt, the conversion to MDIO Slow Mode in the failure branch when attempting to access the PHY id so as to cover all contingencies. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-05e1000e: Fix issue with link flap on 82579David Ertman
Several customers have reported a link flap issue on 82579. The symptoms are random and intermittent link losses when 82579 is connected to specific link partners. Issue has been root caused as interoperability problem between 82579 and at least some Broadcom PHYs in the Energy Efficient Ethernet wake mechanism. To fix the issue, we are disabling the Phase Locked Loop shutdown in 100M Low Power Idle. This solution will cause an increase of power in 100M EEE link. It will cost additional 28mW in this specific mode. Cc: Lukasz Adamczuk <lukasz.adamczuk@intel.com> Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-05e1000e: Expand workaround for 10Mb HD throughput bugDavid Ertman
In commit 772d05c51c4f4896c120ad418b1e91144a2ac813 "e1000e: slow performance between two 82579 connected via 10Mbit hub", a workaround was put into place to address the overaggressive transmit behavior of 82579 parts when connecting at 10Mbs half-duplex. This same behavior is seen on i217 and i218 parts as well. This patch expands the original workaround to encompass these parts. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-05e1000e: Workaround for dropped packets in Gig/100 speeds on 82579David Ertman
This is a workaround for a HW erratum on 82579 devices. Erratum is #23 in Intel 6 Series Chipset and Intel C200 Series Chipset specification Update June 2013. Problem: 82579 parts experience packet loss in Gig and 100 speeds when interconnect between PHY and MAC is exiting K1 power saving state. This was previously believed to only affect 1Gig speed, but has been observed at 100Mbs also. Workaround: Disable K1 for 82579 devices at Gig and 100 speeds. Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e/i40evf: Bump build versionCatherine Sullivan
Bump i40e to 0.3.46 and i40evf to 0.9.23. Change-ID: Ia604ae6d513d9aaa8bfdac79665d9a3a72507df7 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e/i40evf: Retrieve and store missing link config informationNeerav Parikh
Some information returned via "Get Link Status" command was not being cached in the struct i40e_link_status. Add this so the driver can utilize this information as needed. Change-ID: If084a0ae2a63b16b97572196b993742af2c67772 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e: Update function formal parametersKevin Scott
Change the formal parameters to remove argument which is no longer used. Change-ID: I493b56eba74a1f396fa1b7d24c0a4acbe536b5bf Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e: Do not expose fd-sb commands from debugfsAnjali Singhai Jain
Ethtool -k/-K can handle this so we do not need it in debugfs. Change-ID: I9df692f10a60b71805f8f48d3b87c7da3820b2aa Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e: Do not enable NTUPLE feature control in MFP modeAnjali Singhai Jain
Although NTUPLE feature control is disabled by default, do not allow user to be able to change it. Change-ID: I4c3f95fb6dbc56b1b6cc47116ea1f72de02bc99c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e: Change variable type to avoid typecheck failureKevin Scott
Change the variable type to avoid compiler warning about int to u16 possible data truncation. Change-ID: I5eb3b578c86513c9625ca32d2f0b57cc01d7dc98 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40evf: remove debugging messageMitch Williams
If the PF driver fails or is removed from the host, the VF driver will fill up its log with this message. Change-ID: I67045f987f7c0d444d21ded403adc509343cdb8f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40evf: fix panic on PF driver failMitch Williams
Fix a panic that would occur in the VF if the PF driver failed or was removed from the host kernel. In this case, the VF driver calls i40evf_close(), but this function does nothing because the driver is in the resetting state. Because of this, the driver doesn't free its irqs and causes a kernel panic when it tries to disable MSI-X. Change-ID: If95644a89e554b4d7be0dca1b6add26f63047129 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e: Don't stop driver probe when querying DCB config failsNeerav Parikh
In case of any AQ command to query port's DCB configuration fails during driver's probe time; the probe fails and returns an error. This patch prevents this issue by continuing the driver probe even when an error is returned. Also, added an error message to dump the AQ error status to show what error caused the failure to get the DCB configuration from firmware. Change-ID: Ifd5663512588bca684069bb7d4fb586dd72221af Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e: Redistribute queue vectors after DCB reconfigurationNeerav Parikh
The queue vectors are originally distributed among the total number of queues that are configured for a given VSI. The number of queues that are configured for a VSI depends on the number of TCs that are enabled for the VSI at VSI setup/creation time. But, the total number of queues that are configured for a VSI may change based on change in the total number of TCs enabled as a result of change in DCB configuration based on DCBX. Hence, it is required for the queue vectors to be redistributed when the total queues that are configured for a given VSI changes. Without redistributing the vectors the queues that are configured for the newly enabled TCs may not be able to do any Tx/Rx. Change-ID: I4e780903db019e6199c7ce43627cef22c916acfe Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e/i40evf: add driver version string to driver version commandShannon Nelson
The driver version string was added to this struct to be passed down through the firmware to low-level NC-SI functions. We tell the firmware about the length of the ASCII string not counting any terminating null. Change-ID: I09ac98ff9b869e8661c55fc6a5c98808fc280c91 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Anjali Singhai <anjali.singhai@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-28i40e: Use port VLAN in MAC/VLAN filter configurationGreg Rose
The function to set the VF MAC address was not taking the port VLAN filter into account when setting/clearing/resetting the VF's host administered MAC address. Be sure to use the port VLAN for VF MAC filtering configurations. Change-ID: I12595331981c79529738f041dcdbdb667ef8f5e6 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-29 10:37:14 +0000